Professional Documents
Culture Documents
PROFILE
For the past 17 years, we have been trying to minimize that risk by producing a
safer injection, using Auto-Disable Syringes (AD Syringes) because they cannot
be reused. As the high population in our country, Indonesia, is around 270 million,
we consider that in both aspects of humanity & business, setting up a factory for
manufacturing Safer Syringes could have positive results. Therefore PT Oneject
Our AD Syringes are used by the Indonesian Government for the national
immunization program as well as the family planning program. We actively give
training to The Ministry of Health Staffs, Medical Practitioners, and Healthcare
Workers, in order to improve their competence in using AD Syringe.
Hopefully we can take part in the medical devices industry to improve the future
health with Smart Syringe, to prevent the spread of lethal diseases as well as
protecting our valuable Healthcare Workers and make the world a better place to
live.
Best Regards,
3
MES S AG E FROM C EO 3
O UR C O MMI TMEN T
Vision and Mission 14
Core Values 15
Tingkat Konten Dalam Negeri (TKDN) 16
Quality Policy and Quality Goals 17
TABLE OF
CONTENTS TH E JO URN EY
History and Milestone 20
Everything Made Locally From Scratch 22
Oneject Manufacture 24
Itama Ranoraya as Our Distributor 32
O UR PR O DUCTS
Auto Disable Syringe 36
Auto Disable Syringe with Sharp Injury Prevention 37
Safeject Disposable Syringe 38
Safety Needle 39
How to Use 40
C ERTI FI CATES 42
5
ONEJECT
BACKSTORY
In modern world, vaccination has been used not only to prevent diseases but also
greatly reduces the burden of infectious disease, number of disability and death.
While many people think that AD Syringe is the only thing that can be used to
safely vaccinate, many still forget the importance of safety procedures.
Most Healthcare Workers are still struggling with Needle-Stick Injuries after
certain practices such as re-capping the needles prior to disposal.
EV ERY YE A R , MA NY UNSA FE
INJECT I ON S AR OUND TH E
WOR LD, P U T MILLIONS OF
L I F E IN DAN GE R
Re-use and over-use injections can increase the risk of bloodborne infections as
well as bacterial infections and abscesses at injection site. In year 2000, WHO
estimated that 40% of the 16 billion injections were given with re-used injection
equipment leading to millions of new cases:
32
HEPATITIS B
%
40
HEPATITIS C
%
5
HIV
%
37
HEPATITIS B
%
39
HEPATITIS C
%
5.5 HIV
%
8 9
A HIGH LY RIS K O F
NEEDL E-ST I C K
INJU RY
The risk factors are real issues that have happened and could lead to Healthcare We produce special device that will always protects both Patients and Healthcare
Workers being contaminated by a disease from a syringe with an unsafe needle. Workers from suffering accidental needlestick injuries while preventing the
syringes from being reused.
Bloodborne diseases such as a Hepatitis B, Hepatitis C, or HIV/AIDS are all
possible to cross contaminate the Healthcare Worker while they busy protecting As what many people have said “Prevention is better than cure”. Let us all together
the patient. That is why it is very important to mandate a safer environment for make a safer world.
our Heathcare Workers.
With Smart Syringe, our goal is to prevent the spread of infectious diseases to
both patients and Healthcare Workers from any unnecessary accidents. “ B ECAUS E EVERY MAN , WO MAN &
C H I LD DES ERVES TH E R I G H T TO
A S AFE I N JECTI ON .
PT Oneject Indonesia, one amongst the other syringe manufacturers, has already
started to produce a Smart Syringe with a full commitment to our society in
AN D N OW I T’ S TI ME TO PROTECT
Indonesia, from Patients to Healthcare Workers, from Sabang to Merauke, TH E H EALTH CAR E WOR K ER S .
providing a safer injection in 34 provinces and global market.
We are very proud and happy to say, that Oneject Smart Syringe is locally
“
owned and locally manufactured at our factory here in Indonesia with ensuring
International Standards.
10 11
OUR
COMMITMENT
Using the latest technology to ensure the utmost safety of both Patients and
Healthcare Workers with the safest injections.
CO R E VALU E
TECHNOLOGY
Always innovating with the latest
technology to ensure the utmost
safety of both Patients and
Healthcare Workers.
QUALITY
Always prioritize the highest
product quality to ensure its
competitiveness in the market and
to achieve high level of customer
satisfaction.
LOCAL
PRODUCTION
Always guarantee to have a
complete production equipment to
ensure the safety of all production
process from RAW materials to
Finish Goods.
SERVICES
Always giving the best after sales
services with the experiences for
more than 17 years distributing
medical devices to all over Indonesia
and export.
14 15
QUALIT Y
PO LICY
PT Oneject Indonesia refers to GMP (Good Manufacturing
Practice) standard to produce high quality of medical devices
by providing full-equipped and modern quality control
laboratory and well-trained employee.
TINGK AT
PT Oneject Indonesia is the only Smart Syringe Manufacturer
who has a local content product certificate, TKDN (Domestic QUALIT Y
Content Level) from the Ministry of Industry with almost
KONTEN 60% local content. GOALS
DALA M PT Oneject Indonesia managed to earn TKDN certificate as
PT Oneject Indonesia is locally owned and manufactures Produce high quality medical devices, safe and effective.
Based and refer to quality management system and GMP
NEG E RI
our syringes locally at our factory here in Indonesia. From
raw material (PP / polypropylene plastic seeds) until Finish standard.
Product that is ready to be distributed, while always ensuring
(TKDN ) the International Standards. Improve and development products continuously.
PT Oneject Indonesia are fully certifies and ready to serve Build integrated communication and cooperation with both
the medical needs right across our country. As we make a internal and external stakeholders.
full commitment to our society in Indonesia, providing Safer
Injection to both Patients and Healthcare Workers from Comply with the government regulation particularly in
Sabang to Merauke in 34 provinces. healthcare regulation.
16 17
THE
JOURNEY
As a pioneer of AD syringes manufacturer in Indonesia in providing safe injections,
PT Oneject Indonesia has contributed to reduce the number of standard syringes,
which are produced and distributed in Indonesia.
Our product is the market leader of AD syringes in Indonesia with almost 90%
market share. PT Oneject Indonesia is growing continuously, not only in Indonesia
but we have been exported our AD syringes to Asian countries and ready to enter
the European market and US market as well.
HISTORY &
MILESTON E
PT Oneject Indonesia has started its PT Oneject Indonesia has registered as Invited to join Health Business Forum of
first Export. a Certified Manufacturer with a High Cooperation with Indonesian Ministry
Local Content Product from Ministry of of Health and Netherland Ministry of
Industry. Health, as a delegation.
20 21
22 23
The needle assembly line is completely automated and Oneject uses a blister packaging method for each individual
NEEDLE assembles the needle hub, glues the needle cannula to the BLISTER syringe and needle. The product once blister packed is
hub, tests the efficacy of the needle and caps the needle subsequently packed in a shelf carton of 100 pieces and
ASSEMBLY ready for assembly on the syringe assembly line or for PACKING then transferred to a shipping carton for delivery to the
Cl e a n ro o m cl ass separate packing. Used epoxy bond and silicone material for Cl ea n ro o m c l a s s client. Use plastic film and coated medical paper material
made a needle and due process on class 10.000 room. for blister Auto Disable Syringe, and due process on class
1 0, 0 0 0 10, 0 0 0 10.000 room.
The complete syringe is assembled at this point bringing The product once blister packed is subsequently packed in a
SYRINGE together the plunger, barrel, gasket and needle. Used silicone MASTER BOX shelf carton of 100 pieces and then transferred to a shipping
10.000 cps material to put in the barrel and connected some carton for delivery to the client.
ASSEMBLY barrel, plunger, rubber with needle to made the syringe and PACKING
Cl e a n ro o m cl ass due process on class 10.000 room.
1 0, 0 0 0
24 25
26 27
PT Oneject Indonesia Sentul Factory is located in Bogor, the PT Oneject Indonesia is expanding its production facility
O NEJE CT west of Jakarta which is about 50 km from the international
seaport of Jakarta. The built-up area is over 5,000 square
O N E JE CT with the 2nd factory located in International Industry Area in
Bekasi which is about 50 km from the international seaport
SENTUL metres, including 4,000 square metres office space.
PT Oneject Indonesia has modern facilities and hi-tech
BE KASI of Jakarta. The built-up area is over 10,000 square meters
with more than 12,000 square meter facility area. It is built
FACTORY machinery which is necessary to produce the best quality of
medical devices. FACTO RY with a more sophisticated production equipment to support
production efficiency and ensuring high quality standards
which is necessary to produce the best quality of medical
devices.
Jl. Olympic Raya No.B9, Kawasan Indutri Sentul, Bogor
16810, Indonesia
Jl. Anggrek VII No.41, Kawasan Indutri Terpadu Indonesia
China (KITIC), Kab. Bekasi 17337, Indonesia
28 29
OUR
PRODUCTS
Smart Syringe that break after one use should be used for injections by 2020,
the World Health Organization has announced. PT Oneject Indonesia as pioneer
of safety injection devices develops products that features a special device to
prevent medical workers from suffering accidental injuries.
With this, PT Oneject Indonesia has contributed to reduce the number of standard
syringes, which are produced and distributed in Indonesia.
32 33
SAFEJECT SAFEJECT
DISPOSABLE SYRINGE 20ML DISPOSABLE SYRINGE 50ML
22G x 1 1/2” (38 mm) 22G x 1 1/2” (38 mm)
34 35
GREY 27G (0.40MM) BROWN 26G (0.45MM) GREY 27G (0.40MM) BROWN 26G (0.45MM)
3/8”, 1/2” 3/8”, 1/2” 3/8”, 1/2” 3/8”, 1/2”
ORANGE 25G (0.50MM) PURPLE 24G (0.55MM) ORANGE 25G (0.50MM) PURPLE 24G (0.55MM)
1” 1”, 1 1/2” 1” 1”, 1 1/2”
BLUE 23G (0.60MM) BLACK 22G (0.70MM) BLUE 23G (0.60MM) BLACK 22G (0.70MM)
1”, 1 1/4” 1”, 1 1/4”, 1 1/2” 1”, 1 1/4” 1”, 1 1/4”, 1 1/2”
GREEN 21G (0.80MM) YELLOW 20G (0.90MM) GREEN 21G (0.80MM) YELLOW 20G (0.90MM)
1”, 1 1/4”, 1 1/2” 1”, 1 1/2” 1”, 1 1/4”, 1 1/2” 1”, 1 1/2”
BEIGE 19G (1.10MM) PINK 18G (1.20MM) BEIGE 19G (1.10MM) PINK 18G (1.20MM)
1 1/2” 1”, 1 1/2” 1 1/2” 1”, 1 1/2”
36 37
38 39
30G 30G
0.3 x 12 mm 0.3 x 16 mm
30G 30G
0.3 x 25 mm 0.3 x 32 mm
27G 27G
0.4 x 21 mm 0.4 x 32 mm
40 41
HOW TO US E AU TO H OW TO USE
D ISA BL E SY RING E SAFE T Y N E E D LE
Open the pack at the “◄” marking and Remove the needle cap. Don’t push Open the pack at the “◄” marking and take out the Turn the needle cap towards the left until the
take out the syringe. plunger forward, as otherwise syringe syringe. cannula visible. Don’t push plunger forward, as
will get locked. otherwise syringe will get locked.
Insert the needle into the vial and pull Expel air bubble and adjust the piston Open the needle cover by pulling the needle cover Insert the needle into the vial and pull the piston
the piston back slowly to draw the for desired dosage then administer the forward until the close needle tip position below. back slowly to draw the liquid medicine.
liquid medicine. injection.
Expel air bubble and adjust the piston for desired Syringe get locked and plunger breaks if pull it
Syringe get locked and plunger breaks Discard the syringe in a sharp container. dosage then administer the injection. back.
if pull it back.
Restore the needle cap and turn it to the right until Discard the syringe in a sharp container.
it clicks “Click”, then the cap will be locked.
42 43
CERTIFICATES
PT Oneject Indonesia complete certification includes WHO PQS compliance,
Medical ISO 13485, Management ISO 9001, CE Mark, GMP Certificates, and our
high local content product certificate from TKDN (Tingkat Konten Dalam Negeri)
with almost 60% local content.
PT Oneject Indonesia is fully certified and ready to serve the needs of our
Healthcare Workers and patients alike, right across our country.
E008: Auto-disable syringe for fixed dose
immunization
PQS code: E008/030
Description: AD syringe 0.05 ml
Manufacturer's K1 Oneject 0.05 ml
reference:
Manufactured in: Indonesia
Company: PT Oneject Indonesia
Address: Sentul Industrial Estate
Jl.Olympic Raya Kav B9
Bogor 16810,
Indonesia
Specifications
Graduations: 0.05ml Quality standard: ISO 13485,
Fixed needle size: 26G x 3/8" (0.45 x 10 mm) Pieces per carton: 1600
Volume per carton
AD mechanism: Locked / broken plunger 0.06 m3
(m3):
Weight per carton
AD location: Upon completion of injection 6.3 kg
(kg):
Number of components: 3 pieces Minimum order: 16,000
Comments:
Current PQS status: pre-qualified ; 21 May 2007 Valid until : May 2020
Note: If Current PQS status is 'Suspended' or 'Withdrawn', this product is NOT to be purchased
Specifications Specifications
Graduations: 0.05ml Quality standard: ISO 13485, Graduations: 0.1ml Quality standard: ISO 9001, ISO 13485,
Syringe material(s): Polypropylene Markings: CE mark Syringe material(s): Polypropylene Markings: CE mark
Fixed needle size: 27G x 3/8" (0.40 x 10 mm) Pieces per carton: 1600 Fixed needle size: 27G x 3/8" (0.40 x 10 mm) Pieces per carton: 1600
Volume per carton Volume per carton
AD mechanism: Locked / broken plunger 0.051m3 AD mechanism: Locked / broken plunger 0.09 m3/carton
(m3): (m3):
Weight per carton Weight per carton
AD location: Upon completion of injection 8.23kg AD location: Upon completion of injection 10.6 Kg
(kg): (kg):
Number of components: 3 pieces Minimum order: 16,000 Number of components: Minimum order: 1600
Other needle options: Yes Incoterms: FOB Other needle options: Yes Incoterms: FOB
Primary packaging: Blister pack Prices per unit: Upon request to manufacturer Primary packaging: Blister pack Prices per unit: Upon request to manufacturer
Year base price: 2013 Year base price: 2015
Comments: Comments:
Current PQS status: pre-qualified ; 05 Jun 2013 Valid until : May 2020 Current PQS status: pre-qualified ; 12 Sep 2015 Valid until : May 2020
Note: If Current PQS status is 'Suspended' or 'Withdrawn', this product is NOT to be purchased Note: If Current PQS status is 'Suspended' or 'Withdrawn', this product is NOT to be purchased
E008: Auto-disable syringe for fixed dose
E008: Auto-disable syringe for fixed dose
E013: Hypodermic syringes with reuse
PQS code:
immunization
E008/019 PQS code:
immunization
E008/053
prevention feature E013: Hypodermic syringes with reuse
prevention feature
Description: AD syringe 0.5ml Description: AD syringe 0.5ml
PQS code: E013/108 PQS code: E013/019
Manufacturer's K1 OneJect AD 0.5ml Manufacturer's OnejectII 0.5 ml AD syringe Description: RUP Syringe 2 mL Description: RUP syringe 3ml
reference: reference: Manufacturer's
Manufactured in: Manufactured in: reference: Oneject II RUP Syringe 2 mL Manufacturer's
Oneject K1 3ml
Indonesia Indonesia reference:
Company: PT Oneject Indonesia Company: PT Oneject Indonesia Manufactured in: Indonesia Manufactured in: Indonesia
Address: Sentul Industrial Estate Address: Sentul Industrial Estate Company: PT Oneject Indonesia Company: PT Oneject Indonesia
Jl.Olympic Raya Kav B9 Jl.Olympic Raya Kav B9
Bogor 16810, Bogor 16810, Sentul Industrial Estate Sentul Industrial Estate
Indonesia Indonesia Jl.Olympic Raya Kav B9 Jl.Olympic Raya Kav B9
Address: Bogor 16810, Address: Bogor 16810,
Telephone: +62 21 879 17 422 Telephone: +62 21 879 17 422 Indonesia Indonesia
Email: marketing@oneject.co.id Email: marketing@oneject.co.id
Telephone: +62 21 879 17 422 Telephone: +62 21 879 17 422
Web address: www.oneject.co.id Web address: www.oneject.co.id
Email: marketing@oneject.co.id Email: marketing@oneject.co.id
Specifications Specifications Web address: www.oneject.co.id Web address: www.oneject.co.id
ISO 13485, ISO 13485,
Specifications
Graduations: 0.5ml Quality standard: Graduations: 0.5ml Quality standard:
Syringe material(s): Polypropylene Markings: CE 0044 Syringe material(s): Polypropylene Markings: CE mark
Specifications
Graduations: 0.1 mL Needle size: 23G x 1 ¼" 0.1ml 23G x 1 1/4"
Graduations: Needle size:
Fixed needle size: 24G x 1" (0.55 x 25 mm) Pieces per carton: 1600 Fixed needle size: 24G x 1" (0.55 x 25 mm) Pieces per carton: 1600
Syringe material(s): Polypropylene Other needle options: Yes Polypropylene Yes
Syringe material(s): Other needle options:
Volume per carton Volume per carton
AD mechanism: Locked / broken plunger 0.06 m3 AD mechanism: Locked / broken plunger 0.052m3 Number of 3 pieces Fixed
(m3): (m3): Needle fixation: Number of 3 pieces Fixed
components: Needle fixation:
Weight per carton Weight per carton components:
AD location: Upon completion of injection 7.7 kg AD location: Upon completion of injection 7.66kg
(kg): (kg): RUP mechanism: Locked / broken plunger Primary packaging: Paper blister pack Locked & broken plunger Primary packaging: Paper blister pack
RUP mechanism:
Number of components: 3 pieces Minimum order: 16,000 Number of components: 3 pieces Minimum order: 16,000 Upon completion of injection CE mark: Yes
RUP location: RUP location: Upon completion of injection CE mark: Yes
Other needle options: Yes Incoterms: FOB Other needle options: Yes Incoterms: FOB RUP type: Type I B RUP type: Type I B
Primary packaging: Blister pack Prices per unit: Upon request to manufacturer Primary packaging: Blister pack Prices per unit: Upon request to manufacturer
Year base price: 2005 Year base price: 2013 Pieces per carton: 1600 Volume per carton (m3): 0.09 m3 Pieces per carton: 1800 Volume per carton (m3): 0.11 m3
Minimum order: 1600 Weight per carton (kg): 10.6 Kg Minimum order: 18000 Weight per carton (kg): 13.6 kg
Year base price: 2015 Incoterms: FOB Year base price: Incoterms: FOB
2010
Price per unit: Upon request to manufacturer Price per unit: On request to manufacturer
Comments: Comments: Quality standard: - ------ - ISO 9001 - ISO Quality standard: - ISO 9001 - ISO 13485 -
13485 -
Comments: Comments:
pre-qualified; 21 Sep 2015 May, 2020 pre-qualified; 07 May 2007 May, 2020
Current PQS status: Valid until : Current PQS status: Valid until :
Current PQS status: pre-qualified ; 12 Oct 2005 Valid until : May 2020 Current PQS status: pre-qualified ; 05 Jun 2013 Valid until : May 2020
Note: If Current PQS status is 'Suspended' or 'Withdrawn',
Note: If Current PQS status is 'Suspended' or 'Withdrawn',
Note: If Current PQS status is 'Suspended' or 'Withdrawn', this product is NOT to be purchased Note: If Current PQS status is 'Suspended' or 'Withdrawn', this product is NOT to be purchased
Telephone: +62 21 879 17 422 Telephone: +62 21 879 17 422 Telephone: +62 21 879 17 422 Telephone: +62 21 879 17 422
Email: marketing@oneject.co.id Email: marketing@oneject.co.id Email: marketing@oneject.co.id Email: marketing@oneject.co.id
Web address: www.oneject.co.id Web address: www.oneject.co.id Web address: www.oneject.co.id Web address: www.oneject.co.id
Syringe material(s): Polypropylene Other needle options: Yes Syringe material(s): Polypropylene Other needle options: Yes Syringe material(s): Polypropylene Other needle options: Yes Syringe material(s): Polypropylene Other needle options: Yes
Number of 3 pieces Fixed Number of 3 pieces Fixed Number of 3 pieces Fixed Number of 3 pieces Detachable
Needle fixation: Needle fixation: Needle fixation: Needle fixation:
components: components: components: components:
RUP mechanism: Locked & broken plunger Primary packaging: Paper blister pack RUP mechanism: Locked / broken plunger Primary packaging: Paper blister pack RUP mechanism: Locked / broken plunger Primary packaging: Paper blister pack RUP mechanism: Plunger locked and broken Primary packaging: Paper blister pack
RUP location: Upon completion of injection CE mark: Yes RUP location: Upon completion of injection CE mark: Yes RUP location: Upon completion of injection CE mark: Yes RUP location: Upon completion of injection CE mark: Yes
RUP type: Type I B RUP type: Type I B RUP type: Type I B RUP type: Type I B
Pieces per carton: 1800 Volume per carton (m3): 0.11 m3 Pieces per carton: 1600 Volume per carton (m3): 0.051m3 Pieces per carton: 1600 Volume per carton (m3): 0.087m3 Pieces per carton: 1200 Volume per carton (m3): 0.09m3
Minimum order: 18000 Weight per carton (kg): 13.6 kg Minimum order: 16000 Weight per carton (kg): 8.23kg Minimum order: 18000 Weight per carton (kg): 12.20kg Minimum order: 12000 Weight per carton (kg): 11.1 kg
Year base price: 2010 Incoterms: FOB Year base price: 2013 Incoterms: FOB Year base price: 2013 Incoterms: FOB Year base price: 2008 Incoterms: FOB
Price per unit: On request to manufacturer Price per unit: Upon request to manufacturer Price per unit: Upon request to manufacturer Price per unit: On request to manufacturer
Quality standard: - ISO 9001 - ISO 13485 - Quality standard: - ISO 13485 - Quality standard: - ISO 13485 - Quality standard: - ISO 9001 - ISO 13485 -
Note: If Current PQS status is 'Suspended' or 'Withdrawn', Note: If Current PQS status is 'Suspended' or 'Withdrawn', Note: If Current PQS status is 'Suspended' or 'Withdrawn', Note: If Current PQS status is 'Suspended' or 'Withdrawn',
E013: Hypodermic syringes with reuse
prevention feature
PQS code: E013/109
Description: RUP syringe 5 mL
Manufacturer's
reference: Oneject II RUP Syringe 5 mL
Manufactured in: Indonesia
Company: PT Oneject Indonesia
Sentul Industrial Estate
Jl.Olympic Raya Kav B9
Address: Bogor 16810,
Indonesia
Specifications
Graduations: 0.1 mL Needle size: 21G x 1 ½"
PT Oneject Indonesia
Sentul Factory:
Jl. Olympic Raya No.B9, Kawasan Industri
Sentul, Bogor 16810, Indonesia
Bekasi Factory:
Jl. Anggrek VII No.41, Kawasan Industri Terpadu
Indonesia China (KITIC), Kab. Bekasi 17337, Indonesia
Syringe
Oneject AD Syringe 0.5ml Oneject Hypodermic Syringe
24G x 1” (25 mm) with Reuse Prevention Feature
ONEJECT Auto Disable PQS-WHO No: E008/019 1 ml
Syringe design uses a 23G x 1” (25 mm)
simple yet effective PQS-WHO No: E013/023
technology by Star Syringe
Limited (UK). After injection,
the plunger will lock and
immobilize automatically Oneject Hypodermic Syringe
making the syringe with Reuse Prevention Feature Oneject Hypodermic Syringe
unusable. This design is 2 ml with Reuse Prevention Feature
WHO / PQS approved and 23G x 1 1/4” (32 mm) 3 ml
certified to all Auto Disable PQS-WHO No: 23G x 1 1/4” (32 mm)
Syinges from PT Oneject PQS-WHO No: E013/019
Indonesia.
PT Oneject Indonesia
Sentul Factory:
Jl. Olympic Raya No.B9, Kawasan Industri
Sentul, Bogor 16810, Indonesia
Bekasi Factory:
Jl. Anggrek VII No.41, Kawasan Industri Terpadu
Indonesia China (KITIC), Kab. Bekasi 17337, Indonesia
PT Oneject Indonesia juga
mempunyai sertifikasi ISO Tel. : +62 21 8791 7422 (Hunting)
yang lengkap Fax. : +62 21 8790 2761
(ISO:9001:2015, ISO E-mail : marketing@oneject.co.id
Every man,
13485:2016), sertifikasi
CE dari TUV Nord woman & child
Indonesia, GMP, dan deserves
Prequalification
PQS-WHO. Di
S A FEJ EC T
SAFETY NEEDLE SOLUTION
the right to a
kedepannya, PT Oneject safe injection
Indonesia akan selalu
mempromosikan produk
lokal di industri global. www.oneject.co.id
Oneject Smart Syringe adalah
Oneject perpaduan antara Oneject
Smart Syringe Auto-Disable Syringe dan Oneject
Safety Needle, sehingga Oneject
Smart Syringe akan memberikan
(Auto-Disable keamanan maksimal untuk Pasien dan
Syringe + Tenaga Medis.
Safety Needle) Setelah melakukan penyuntikan,
piston akan terkunci dan rusak secara
otomatis, membuat suntikan tidak
dapat digunakan dan jarum suntik
akan terlindungi. Dengan demikian,
jarum suntik tidak akan melukai tenaga
medis.
27 G x 3/8” 23 G x 1”
SIZE
(10 mm) (25 mm)
LENGTH OF THE CANNULA COLOR
0.05 ml 1 ml
OD ( mm) GAUGE