Professional Documents
Culture Documents
MOTORHEAD ASSEMBLY
(Refer to page 114)
ACCELERATOR
WEIGHT BAR
HYDRAULIC JAR
INDEXING TOOL
(Refer to page 135)
SNIPPER OVERSHOT
HYDRAULIC RELEASE OVERSHOT
(Refer to page 126)
(Refer to page 124)
DESCRIPTION/APPLICATION
The Hydraulic Releasing Overshot is used to catch external JDC type
fishnecks or to catch slick OD profiles. The tool is engineered to with-
stand high tensile, and compressive stresses encountered during jarring
operations. The overshot is engaged by applying slight set-down weight
at the tool. A flow path is provided through the tool for circulation while
running in the hole; this path can also be used to wash debris from the
top of the fish or profile. In the event that retrieval is not possible, in-
creased flow rate through the tool will allow release from the fishneck en-
suring no additional tools are left in the well.
FEATURES/BENEFITS
• High strength
• Can be used for jarring operations
• Flow path permits washing debris from the top of the fish or profile
• No shear screws
• Design minimizes stress on the grapple section
SPECIFICATIONS
For Slick OD Fish, Product Family No. H13330
Tool
Length Catch Size
OD
in. mm in. mm in. mm
2.13 54.1 19.25 488.0 1.13, 1.25 28.6, 31.8
2.25 57.1 19.25 488.0 1.38 34.9
2.63 66.8 20.94 531.9 1.25, 1.50, 1.75 31.8, 38.1, 44.5
3.00 76.2 24.25 616.0 2.00, 2.13, 2.25 51.8, 54.0, 57.2
3.50 88.9 24.25 616.0 2.25, 2.38, 2.50 57.2, 60.3, 63.5
3.70 94.0 23.62 599.9 2.38 60.3
3.75 95.3 23.62 599.9 2.88 73.0
4.00 101.6 26.88 682.8 2.63, 2.88, 3.00, 3.13 66.7, 73.0, 76.2, 79.4
DESCRIPTION/APPLICATION
The Hydraulic Releasing GS Spear, specifically designed for thru-tubing
fishing operations, is engineered to withstand the high tensile and com-
pressive stresses encountered during jarring operations. These spears
are designed to engage standard GS fish necks or slick ID fish necks.
The non-rotating GS Spear incorporates a clutch matching that of the
FAU™ Hydraulic Disconnect so that torque may be transmitted through
the tool.
A flow path is provided through the tool to allow circulation while running
in the hole. Once the profile is encountered, the flow path can be used to
create a jetting action to wash debris from the profile.
To engage the profile or the slick ID of a fish, minimal set-down weight is
applied which moves the collets into the release position allowing it to en-
ter the fish ID. Once the spear has adequately entered this ID, the collets
or slip will snap into the catch position. To release from the fish or GS pro-
file, increased flow rate will move the collet or slip into the release posi-
tion.
FEATURES/BENEFITS
• Maximum ID on collets or slips
• High tensile strength
• Pump through capabilities
• No shear screws
• Minimized stress on collets or slips
SPECIFICATIONS
For Slick ID Fish, Product Family No. H13310
Tool
Length Catch Range
OD
in. mm in. mm in. mm
1.343 to 1.500 34.1 to 38.1
1.81 46.0 18.40 467.4
1.438 to 1.625 36.5 to 41.3
2.00 50.8 18.40 467.4 1.590 to 1.780 40.4 to 45.2
1.750 to 1.970 44.5 to 50.0
2.25 57.2 20.42 518.7
1.938 to 2.150 49.2 to 54.6
2.110 to 2.280 53.6 to 57.9
2.70 68.6 22.00 558.8
2.210 to 2.490 56.1 to 63.2
3.00 76.2 24.00 609.6 2.460 to 2.810 62.5 to 71.4 For Slick ID Fish For Fishing Neck
2.794 to 3.080 71.0 to 78.2 Product Family Product Family
3.38 85.9 24.13 612.9 No. H13310 No. H13311
2.900 to 3.190 73.7 to 81.0
3.5 88.9 24.13 612.9 3.125 to 3.375 79.4 to 85.7
SPECIALIZATION GUIDE
Tool Available For CT Size
Length Standard
OD To Be Cut
Connection
in. mm in. mm 1" 1-1/4" 1-1/2" 1-3/4" 2"
1.88 47.7 26.60 675.6 x 1-1/4" CS Hydril Box
2.25 57.1 24.60 624.8 x x 1-1/2" CS Hydril Box
2.63 66.7 23.63 600.2 x x x 1-1/2" CS Hydril Box
3.13 79.5 23.19 589.0 x x x x x 2-7/8" Hydril A-95 Box
3.38 85.8 23.25 590.6 x x x x x 2-7/8" CS Hydril Box
Snipper Overshot
Product Family No. H13334
THRU-TUBING FISHING TOOLS Baker Oil Tools
SPECIFICATION GUIDE
Tool Available For CT Size
Length Standard
OD To Be Engaged
Connection
in. mm in. mm 1" 1-1/4" 1-1/2" 1-3/4" 2"
1.88 47.7 24.75 628.7 x 1-1/4" CS Hydril Box
2.25 57.1 24.75 628.7 x x 1-1/2" CS Hydril Box
2.63 66.7 23.63 600.2 x x x 1-1/2" CS Hydril Box
3.13 79.5 23.19 589.0 x x x x x 2-7/8" Hydril A-95 Box
3.38 85.8 23.34 592.8 x x x x x 2-7/8" CS Hydril Box
SPECIFICATION GUIDE
Tool Available For CT Size
Length Standard
OD To Be Engaged
Connection
in. mm in. mm 1" 1-1/4" 1-1/2" 1-3/4" 2"
1.88 47.7 16.00 406.4 x 1-1/4" CS Hydril Box
2.25 57.1 15.00 381.0 x x
1-1/2" CS Hydril Box
2.63 66.7 16.38 416.1 x x x
3.13 79.5 14.75 374.7 x x x x x 2-7/8" Hydril A-95 Box
3.38 85.8 12.88 327.2 x x x x x 2-7/8" CS Hydril Box