Professional Documents
Culture Documents
Design Erection Etc.
Design Erection Etc.
No 20-1011-01
Rev. No. 1
Page 2 of 88
TABLE OF CONTENTS
1. TECHNICAL SPECIFICATIONS 3
2. UNITS 3
3. MATERIALS AND STRENGTHS 4
4. ALLOWABLE DRIFT AND DEFLECTION LIMITS 6
5. LOAD ANALYSIS 7
5.1 DEAD LOADS 7
5.1.1 DEAD LOADS FOR ROOF DESIGN: 7
5.1.2 DEAD LOADS FOR FLOOR DESIGN: 7
5.1.2 DEAD LOADS FOR WALL DESIGN: 7
5.1.3 DEAD LOADS FOR EQUIPMENT: 8
5.2 LIVE LOADS: 8
5.3 WIND LOADS: 9
6. LOAD COMBINATIONS 11
7. STRUCTURAL ANALYSIS AND SIGN CONVENTION 15
8. DESCRIPTION OF THE STRUCTURE 16
9. THE STRUCTURAL SYSTEM 17
9.1 GENERAL ELEVATION OF THE FRAME MODEL 17
9.2 JOINT LABELS FOR FOUNDATION DESIGN 21
10. ANALYSIS AND DESIGN RESULTS OF STRUCTURE 22
10.1 APPLICATION OF LOADS 22
10.3 STEEL DESIGN SUMMARY DATA 36
11. FOUNDATION LOADING PLAN TO INDICATE THE CRITICAL LOADS ON EACH SUPPORT FOR ALL
LOAD CASES 54
12. DEFLECTION CHECK 68
13. LIFTING CALCULATION 71
2
Doc. No 20-1011-01
Rev. No. 1
Page 3 of 88
1. TECHNICAL SPECIFICATIONS
Reference Standards
[𝟏] EUROCODE 3-2005 (Design Of Steel Structures))
[𝟐] EN1998-4 (Design Of Structures For Earthquake Resistance)
[𝟑] EN1991-1-4 (Wind Actions)
[𝟒] EN1991-1-3 (Snow Loads)
[𝟓] ISO 8.8 (Connection members [Bolt/Nuts] quality standart)
[𝟔] EN 1993-1-1-8 (Design of steel structures-joint connetions)
2. UNITS
Following units will be used through the calculations and detailing
Meter m
Length
Milimeter mm
Square meter m2
Surface
Square milimeter mm2
Newton N
Kilogram-f kg-f
Notes:
1 kgf = 9,80665 N
1 kN = 1000 N
3
Doc. No 20-1011-01
Rev. No. 1
Page 4 of 88
steel grade
fy [N/mm2 ] fu [N/mm2 ] fy [N/mm2 ] fu [N/mm2 ]
EN 10025-2
4
Doc. No 20-1011-01
Rev. No. 1
Page 5 of 88
FRAME SECTIONS
TABLE: Frame Section Properties 01 - General
SectionName Material Shape t3 t2 tf tw Area
Text Text Text mm mm mm mm mm2
BLU 75-65*4 S235 Channel 75 65 4 4 788
BLU130*60*4 S235 Channel 130 60 4 4 968
CC100-41-13*2 S235 SD Section 408
RHS 100X100X4 S235 Box/Tube 100 100 4 4 1536
RHS 150*150-5 S235 Box/Tube 150 150 5 5 2900
TUBE 120*120*8 S235 Box/Tube 120 120 8 8 3584
TUBE 120*60*4 S235 Box/Tube 120 60 4 4 1376
TUBE 150-100*6 S235 Box/Tube 150 100 6 6 2856
TUBE 80*40*3 S235 Box/Tube 80 40 3 3 684
U100-54*2 S235 SD Section 1168
UPN100 S235 Channel 100 50 8,5 6 1346
UPN120 S355 Channel 120 55 9 7 1698
UPN180 S235 Channel 180 70 11 8 2796
UPN200 S235 Channel 200 75 11,5 8,5 3219
UPN240 S235 Channel 240 85 13 9,5 4229
5
Doc. No 20-1011-01
Rev. No. 1
Page 6 of 88
6
Doc. No 20-1011-01
Rev. No. 1
Page 7 of 88
5. LOAD ANALYSIS
Characteristic values of loads
The following loads should be used in design:
D :DEAD LOAD (Only steel structure member weights - SAP 2000)
DL :DEAD LOAD (Other structural member weights)
LL :LIVE LOAD
Wx + :WIND LOAD (on the +X direction)
Wy + :WIND LOAD (on the +Y direction)
Wx - :WIND LOAD (on the -X direction)
Wy - :WIND LOAD (on the -Y direction)
Deq :Equipment LOAD
7
Doc. No 20-1011-01
Rev. No. 1
Page 8 of 88
8
Doc. No 20-1011-01
Rev. No. 1
Page 9 of 88
9
Doc. No 20-1011-01
Rev. No. 1
Page 10 of 88
10
Doc. No 20-1011-01
Rev. No. 1
Page 11 of 88
6. LOAD COMBINATIONS
11
Doc. No 20-1011-01
Rev. No. 1
Page 12 of 88
12
Doc. No 20-1011-01
Rev. No. 1
Page 13 of 88
13
Doc. No 20-1011-01
Rev. No. 1
Page 14 of 88
14
Doc. No 20-1011-01
Rev. No. 1
Page 15 of 88
Structural analysis of the building will be done by using SAP2000 (Structural Analysis
Program – University of Berkeley).
3-D Finite Element Modeling will be used. Column and beams will be modeled by means
of “ Frame Elements”.
The local axes color convention for joints, frame elements, shell elements, etc. is as follows:
local 1(x) axis: red
local 2(y) axis: green
local 3(z)axis: blue
15
Doc. No 20-1011-01
Rev. No. 1
Page 16 of 88
16
Doc. No 20-1011-01
Rev. No. 1
Page 17 of 88
17
Doc. No 20-1011-01
Rev. No. 1
Page 18 of 88
18
Doc. No 20-1011-01
Rev. No. 1
Page 19 of 88
19
Doc. No 20-1011-01
Rev. No. 1
Page 20 of 88
20
Doc. No 20-1011-01
Rev. No. 1
Page 21 of 88
21
Doc. No 20-1011-01
Rev. No. 1
Page 22 of 88
22
Doc. No 20-1011-01
Rev. No. 1
Page 23 of 88
A B C D E
Cpe,10 -1,2 -0,8 -0,5 0,8 0,7
Wpe=qp(z)xCpe (kN/m²) -1,87 -1,24 -0,78 1,25 1,09
23
Doc. No 20-1011-01
Rev. No. 1
Page 24 of 88
A B C D E
Cpe,10 -1,2 -0,8 -0,5 0,8 0,7
Wpe=qp(z)xCpe (kN/m²) -1,87 -1,24 -0,78 1,25 1,09
24
Doc. No 20-1011-01
Rev. No. 1
Page 25 of 88
25
Doc. No 20-1011-01
Rev. No. 1
Page 26 of 88
26
Doc. No 20-1011-01
Rev. No. 1
Page 27 of 88
27
Doc. No 20-1011-01
Rev. No. 1
Page 28 of 88
28
Doc. No 20-1011-01
Rev. No. 1
Page 29 of 88
29
Doc. No 20-1011-01
Rev. No. 1
Page 30 of 88
30
Doc. No 20-1011-01
Rev. No. 1
Page 31 of 88
31
Doc. No 20-1011-01
Rev. No. 1
Page 32 of 88
32
Doc. No 20-1011-01
Rev. No. 1
Page 33 of 88
33
Doc. No 20-1011-01
Rev. No. 1
Page 34 of 88
34
Doc. No 20-1011-01
Rev. No. 1
Page 35 of 88
35
Doc. No 20-1011-01
Rev. No. 1
Page 36 of 88
36
Doc. No 20-1011-01
Rev. No. 1
Page 37 of 88
37
Doc. No 20-1011-01
Rev. No. 1
Page 38 of 88
38
Doc. No 20-1011-01
Rev. No. 1
Page 39 of 88
39
Doc. No 20-1011-01
Rev. No. 1
Page 40 of 88
40
Doc. No 20-1011-01
Rev. No. 1
Page 41 of 88
41
Doc. No 20-1011-01
Rev. No. 1
Page 42 of 88
42
Doc. No 20-1011-01
Rev. No. 1
Page 43 of 88
43
Doc. No 20-1011-01
Rev. No. 1
Page 44 of 88
44
Doc. No 20-1011-01
Rev. No. 1
Page 45 of 88
45
Doc. No 20-1011-01
Rev. No. 1
Page 46 of 88
46
Doc. No 20-1011-01
Rev. No. 1
Page 47 of 88
47
Doc. No 20-1011-01
Rev. No. 1
Page 48 of 88
48
Doc. No 20-1011-01
Rev. No. 1
Page 49 of 88
49
Doc. No 20-1011-01
Rev. No. 1
Page 50 of 88
50
Doc. No 20-1011-01
Rev. No. 1
Page 51 of 88
51
Doc. No 20-1011-01
Rev. No. 1
Page 52 of 88
52
Doc. No 20-1011-01
Rev. No. 1
Page 53 of 88
53
Doc. No 20-1011-01
Rev. No. 1
Page 54 of 88
54
Doc. No 20-1011-01
Rev. No. 1
Page 55 of 88
55
Doc. No 20-1011-01
Rev. No. 1
Page 56 of 88
56
Doc. No 20-1011-01
Rev. No. 1
Page 57 of 88
57
Doc. No 20-1011-01
Rev. No. 1
Page 58 of 88
58
Doc. No 20-1011-01
Rev. No. 1
Page 59 of 88
59
Doc. No 20-1011-01
Rev. No. 1
Page 60 of 88
60
Doc. No 20-1011-01
Rev. No. 1
Page 61 of 88
61
Doc. No 20-1011-01
Rev. No. 1
Page 62 of 88
62
Doc. No 20-1011-01
Rev. No. 1
Page 63 of 88
63
Doc. No 20-1011-01
Rev. No. 1
Page 64 of 88
64
Doc. No 20-1011-01
Rev. No. 1
Page 65 of 88
65
Doc. No 20-1011-01
Rev. No. 1
Page 66 of 88
66
Doc. No 20-1011-01
Rev. No. 1
Page 67 of 88
67
C-FIX 1.89.0.0
Database version
2020.6.29.13.59
Date
12/08/2020
Design Specifications
Anchor
Anchor system fischer Injection system FIS V
Injection resin FIS V 410 C
Fixing element Threaded rod FIS A M 20 x 245 8.8, zinc plated steel,
property class 8.8
Calculated anchorage 115 mm
depth
Design Data Anchor design in Concrete according European Technical
Assessment ETA-02/0024, Option 1,
Issued 02/01/2020
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 1
C-FIX 1.89.0.0
Database version
2020.6.29.13.59
Date
12/08/2020
Input data
Design actions *⁾
# NSd VSd,x VSd,y MSd,x MSd,y MT,Sd Type of load�ng
kN kN kN kNm kNm kNm
1 44.00 18.00 38.00 0.00 0.00 0.00 Static or quasi-static
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 2
C-FIX 1.89.0.0
Database version
2020.6.29.13.59
Date
12/08/2020
Steel failure
( NRd,s )
βN,s
Anchor no. % Group N° Decisive Beta
1 16.8 1 βN,s;1
2 16.8 2 βN,s;2
( NRd,p )
Eq. (5.2)
Eq. (5.2a)
Eq. (5.2c)
Eq. (5.2d)
Eq. (5.2e)
Eq. (5.2f)
Eq. (5.2g)
Eq. (5.2h)
Eq. (5.2i)
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 3
C-FIX 1.89.0.0
Database version
2020.6.29.13.59
Date
12/08/2020
βN,p
Anchor no. % Group N° Decisive Beta
1, 2 74.5 1 βN,p;1
( NRd,c )
Eq. (5.3)
Eq. (5.3a)
Eq. (5.3c)
Eq. (5.3d)
Eq. (5.3e)
βN,c
Anchor no. % Group N° Decisive Beta
1, 2 82.2 1 βN,c;1
( NRd,sp )
Eq. (5.4)
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 4
C-FIX 1.89.0.0
Database version
2020.6.29.13.59
Date
12/08/2020
Eq. (5.3a)
Eq. (5.3c)
Eq. (5.3d)
Eq. (5.3e)
Eq. (5.4a)
βN,sp
Anchor no. % Group N° Decisive Beta
1, 2 71.4 1 βN,sp;1
( VRd,s )
βVs
Anchor no. % Group N° Decisive Beta
1 26.8 1 βVs;1
2 26.8 2 βVs;2
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 5
C-FIX 1.89.0.0
Database version
2020.6.29.13.59
Date
12/08/2020
( VRd,cp )
Eq. (5.7a)
Eq. (5.3)
Eq. (5.3a)
Eq. (5.3c)
Eq. (5.3d)
Eq. (5.3e)
βV,cp
Anchor no. % Group N° Decisive Beta
1, 2 39.3 1 βV,cp;1
Eq. (5.10)
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 6
C-FIX 1.89.0.0
Database version
2020.6.29.13.59
Date
12/08/2020
Technical remarks
All data and information in the software is based on fischer products and common engineering knowledge. Please
check all the proof results against local valid standards and approvals.
As fischer is not the design office, the attached is no guarantee for incorrect input or assumptions. Any
recommendations have to be approved by the building-authority or project engineer. Results are valid only for
anchor system calculated in the attached. If any part of the system is changed, it will invalidate this report and new
calculations would be required.
The transmission of the anchor loads to the supports of the concrete member shall be shown for the ultimate limit state and
the serviceability limit state; for this purpose, the normal verifications shall be carried out under due consideration of the
actions introduced by the anchors. For these verifications the additional provisions given in the current design method shall
be taken into account.
As a pre-condition the anchor plate is assumed to be flat when subjected to the actions. Therefore, the plate must be
sufficiently stiff. The C-Fix anchor plate design is based on a proof of stresses and does not allow a statement about
the stiffness of the plate. The proof of the necessary stiffness is not carried out by C-Fix.
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 7
C-FIX 1.89.0.0
Database version
2020.6.29.13.59
Date
12/08/2020
Installation data
Anchor
Anchor system fischer Injection system FIS V
Injection resin FIS V 410 C (other cartridge sizes Art.-No. 531504
available)
Fixing element Threaded rod FIS A M 20 x 245 8.8, Art.-No. 519404
zinc plated steel, property class 8.8
Installation details
Thread diameter M 20
Drill hole diameter d0 = 24 mm
Drill hole depth h2 = 135 mm
Calculated anchorage hef = 115 mm
depth
Drilling method hammer drilling
Drill hole cleaning 4 times blowing,
4 times brushing,
4 times blowing
required activities according the
given instruction in the approval
No borehole cleaning required in
case of using a hollow drill bit, e.g.
fischer FHD.
Installation type Push-through installation
Annular gap Annular gap filled
Maximum torque Tinst,max = 120.0 Nm
Socket size 30 mm
Base plate thickness t = 20 mm
Total fixing thickness tfix = 20 mm
Tfix,max
Volume of resin per drill 34 ml/17 scale divisions
hole
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 8
C-FIX 1.89.0.0
Database version
2020.6.29.13.59
Date
12/08/2020
Attachment
Profile type None
Anchor coordinates
x y
Anchor no. mm mm
1 -50 0
2 50 0
The input values and the design results should be checked against local valid standards and approvals. Please respect the disclaimer of warranty in
the license agreement of the Software.
Page 9
Doc. No 20-1011-01
Rev. No. 1
Page 68 of 88
68
Doc. No 20-1011-01
Rev. No. 1
Page 69 of 88
69
Doc. No 20-1011-01
Rev. No. 1
Page 70 of 88
70
Doc. No 20-1011-01
Rev. No. 1
Page 71 of 88
Lifting calculation is performed with only DL(dead load) and DEQ(Equipment load)
71
Doc. No 20-1011-01
Rev. No. 1
Page 72 of 88
72
Doc. No 20-1011-01
Rev. No. 1
Page 73 of 88
73
Doc. No 20-1011-01
Rev. No. 1
Page 74 of 88
74
Doc. No 20-1011-01
Rev. No. 1
Page 75 of 88
75
Doc. No 20-1011-01
Rev. No. 1
Page 76 of 88
76
Doc. No 20-1011-01
Rev. No. 1
Page 77 of 88
77
Doc. No 20-1011-01
Rev. No. 1
Page 78 of 88
78
Doc. No 20-1011-01
Rev. No. 1
Page 79 of 88
79
Doc. No 20-1011-01
Rev. No. 1
Page 80 of 88
80
Doc. No 20-1011-01
Rev. No. 1
Page 81 of 88
81
Doc. No 20-1011-01
Rev. No. 1
Page 82 of 88
82
Doc. No 20-1011-01
Rev. No. 1
Page 83 of 88
83
Doc. No 20-1011-01
Rev. No. 1
Page 84 of 88
84
Doc. No 20-1011-01
Rev. No. 1
Page 85 of 88
85
Doc. No 20-1011-01
Rev. No. 1
Page 86 of 88
86
Doc. No 20-1011-01
Rev. No. 1
Page 87 of 88
87
Doc. No 20-1011-01
Rev. No. 1
Page 88 of 88
88
At is the area of the net section and is calculated by:
At = 2 t beff
At =2x25x70
At =3500 mm2
Pt.u = Cr Stu At
Pt.u =1x3500x0,052
Pt.u =182 t
Pt =182/1,2x2