Professional Documents
Culture Documents
PERSONAL DETAIL
Name: Ruben PULI
Occupation: Electrical Engineer (Power)
Date of Birth: 4th July, 1993
Place of Birth: Ialibu General Hospital
Gender: Male
Marital Status: Single
Health: Excellent (Nonsmoker, non betelnut chewer and non-alcohol drinker)
Denomination: Seventh Day Adventist (SDA)
Nationality: Papua New Guinean
CURRENT ADDRESS
Mr. Ruben PULI
o/c: PNG POWER Ltd
PO Box 1105, BOROKO, NCD, PNG
Wards Road, Cordia Street, Hohola
Cell Phone Number: (+675) 72735744
Gmail Address: rubensonpuli@gmail.com
SUMMARY
I am a qualified Electrical (Power) Engineer recently employed with PNG Power Limited in the National Office
as Thermal Centers’ Reliability Engineer and Fuel Management Staff. I have 3 plus years of work experiences
with both private and state owned companies. Thus far, I have absorbed sufficient hands-on technical
engineering skills and techniques. I had also successfully designed and built a micro hydro prototype in my
final year thesis in 2018 at PNG University of Technology.
Educationally, I possess Bachelor’s Degree in Electrical and Communication Engineering (Power) at PNG
University of Technology. I also possess distinction Diploma in Electrical and Electronics Engineering (Power)
at National Polytechnic Institute of PNG in Lae. Currently, I am doing Post Graduate Business Management at
Singapore School of business. I also graduated with couple of online certificates in Renewable Energy and
Reduction of Carbon emission under sponsorship of Total E&P (TEP PNG). Currently am doing online advance
diploma in Business Management via zoom with Australian Institute of Business.
My foremost objective remains to work on the thought-provoking job environment to utilized and heighten
my engineering skills and knowledge by mastering the fundamental principles of an organization and being
accountable for performance and result oriented. I strongly believe in teamwork and able to motivate
others.
Have strong knowledge in electrical drawings using AUTOCAD (Electrical Reticulation Schematics Designs).
Testing, Inspection, Commissioning of Equipment, Report Writing and able to do Recommendations & certify.
In-depth knowledge in application and Understanding of the SAA/NZ Wiring Rules.
Have fair knowledge on Electrical Drives and Control Systems.
Have strong knowledge on Power Systems and High voltage Engineering.
Have depth Knowledge on Programmable Logic Controls (PLC).
Have depth knowledge on Renewable energy including; installation of solar panels and wind turbines.
Have in-depth knowledge and skills on setting up Micro/Mini Hydro - Had created a Hydro-Model at PNG UoT
Power Laboratory as My final year Thesis Project.
Have in-depth knowledge on electrical software such as; Mathcad, Math Lab, electrical CAD, AutoCAD, and
Electronics Work Bench (EWB) and Power World Simulations.
Have strong knowledge on Microsoft word, power point, publisher and complete knowledge on excel
application.
I have strong and effective Communication Skills in both English & Pidgin (Orally, Written and interpersonal).
Public Speaking and Negotiation skills, Research, Plan and prioritize work.
Team player and can work individual when required with high level of honesty
Strong work ethic and can work under pressure within the given time frame.
I am self-confident person who can solve problems and make decision.
A proven team player, who is reliable, able to motivate others and has integrity
I am flexible, adjustable, self-starter, and eager to quickly adapt new concepts and ideas
Open and willing to learn and do more when required
Bachelor’s Degree in Electrical and Communication Engineering (Power) – Papua New Guinea University of
Technology – Lae, Morobe Province – 2014-2018
Diploma in Electrical and Electronics Engineering (Power) – National Polytechnic Institute of Papua New Guinea
– Lae, Morobe Province – 2012 - 2013
Upper Secondary School Certificate (Grade-12) – Kopen Secondary School, Wabag, Enga Province, 2010 – 2011
Lower Secondary School Certificate (Grade-10) – Magarima Provincial High School, Tari, Hela Province, 2008 –
2009
Primary School Certificate (Grade 8) - Magarima Admin Primary School, Tari, Hela Province, 2006 – 2007
Post Graduate Diploma in Business Management – Singapore Institute of Busines, 2021-2022 (Currently Via
Zoom- Free Online)
Certificate in Energy Transition: Innovative Towards Low Carbon – IFP School, 5 Weeks MOOC Online Course
with Total E&P PNG Limited (TEP PNG) – 2020
Certificate in Tomorrow’s Mobility: A Way to Assess Main Drivers of Carbon Emission – IFP School - 4 Weeks
MOOC Online Course from Total E&P PNG Limited (TEP PNG) – 2020
3 Air Craft Maintenance Engineer (Avionics Engineer) – North Coast Aviation (NCA Engineering), Base in Lae,
Nazab Morobe Province, 8th November, 2017 – 4th January, 2018
Performs stress analysis on aircraft (metallic and composite) structures under supervision
Maintain, repair, overhaul, modify and test electrical, electronic, instrument and radio systems-components
under supervision
Day to day tasks include dismantling, inspecting, testing, repairing and reassembling aircraft engines,
installing electrical circuits, testing aircraft communication equipment, aircraft instrumentation and
electronic systems, replacing and testing aircraft oxygen system components, assembling parts and
subassemblies of aircraft frames, conducting routine pre-flight inspections of engines, aircraft frames and
mechanical systems under supervision.
Check and revise technical data to reflect aircraft, engine and avionic components’ current configuration
under supervision.
3. Trainee - Electrical Maintenance Engineer (On The Job Training) – PNG Power Limited, Base in Yonki Hydro
Power Station (Generation – Ramu 1 Power House), Kainantu, EHP, 7th January, 2015 to 16th July, 2015.
4. Trainee – Electrical Maintenance Engineer (Practical) – PNG Power Limited, Base in Yonki Hydro Power Station
(Generation – Ramu 1 Power House), Kainantu, EHP, 15th November, 2012 to 16th January,2013
5. Student Laboratory (Both Power and Electronics LABS) – Department of Electrical Engineering, PNG
University of Technology, Lae.
I learned typical steps for deigning electronic devices: design circuit schematic, simulate it and breadboard
testing using different types of integrated Circuits (ICs) and power electronics devices such as BJT, Power
MOSFETS, IGBT, Capacitors and Resistors.
Another hands-on lab experienced that I gained was on how to control motor manually using Controls circuit
and Power circuit. I am also good at reading control circuit and power circuit.
Dismantle DC motors and Induction motors’ components apart and fixed them again for normal operation.
6. Micro/Mini Hydro Power Prototype/Model Successfully Built – Final Year Project, 2018.
LEADERSHIP QUALIFICATION
INTEREST
Want to do further study (Masters in Electrical Power Engineering) after work experiences.
Want to be an accomplished electrical engineer in the near future.
Always wanted to be a leader and the best Manager.
Want to have another degree in Business Administration
HOBBIES
Like meeting new people and learning new things
Like Team Work but dislike Laziness
Like to participate in Church Work
Reading electrical engineering journals and other updated news in electrical fields
3. Mr Robert Iki Leso (MBA, Bed (HONS) & BEd) - PROGRAM MANAGER
Department of Open and Distance Learning
PNG University of Technology Private Mail Bag
Lae, 411 Morobe Province
Phone: Landline: +6754734207, Digicel: +67572701110
Gmail: rikileso@gmail.com
Email: robert.leso@pnguot.ac.pg