Professional Documents
Culture Documents
EASY ONLINE TEST SERIES
MY PROFILE Solution Report For Fluid Mechanics Part 1
Represent whole test solution with correct and incorrect answers.
REPORTS
View Your Test Analysis
BUY PACKAGE
NEWS
Q. No Question Status
Ask an Expert
Q.1 In the phenomenon of cavitation, the characteristic fluid property involved is
a. Surface tension
b. Viscosity
c. Bulk modulus of elasticity
d. Vapour pressure
Not Attempt Correct Ans. d
FAQ? Have any doubt? Solution
Q.2 What are the forces that influence the problem of fluid statics?
a. Gravity and viscous forces
b. Gravity and pressure forces
c. Viscous and surface forces
d. Gravity and surface tension forces
Not Attempt Correct Ans. b
FAQ? Have any doubt? Solution
Q.3 The streamline equation passing through the point (2, 3) will be (The two
dimensional flow is given by u = a and v = a)
a. x + y = 1
b. y = x + 1
c. 2x + y = 1
d. x – 1 = y
Not Attempt Correct Ans. b
FAQ? Have any doubt? Solution
Q.4 Newton’s law of viscosity depends upon the
a. Stress and strain in a fluid
b. Shear stress, pressure and velocity
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1349&t=cont1&testType=2 1/5
2/12/2017 MADE EASY ONLINE TEST SERIES
c. Shear stress, and rate of strain
d. Viscosity and shear stress
Not Attempt Correct Ans. c
FAQ? Have any doubt? Solution
Q.5 A rectangular water tank, full to the brim, has its length, breadth and height in
the ratio of 2 : 1 : 2. The ratio of hydrostatic forces at the bottom to that at any
larger vertical surface is _________.
Not Attempt Correct Ans. 1
FAQ? Have any doubt? Solution
Q.6 If the stream function is given by ψ = 3xy, then the velocity at point (2, 3) is
_________ units.
Q.7 An orifice meter with Cd = 0.61 is substituted by venturimeter with Cd = 0.98 in
a pipeline carrying crude oil, having the same throat diameter as that of the
orifice. For the same flow rate, the ratio of the pressure drops for the
venturimeter and the orifice meter is __________.
Q.8 For the manometer shown in figure. Calculate the pressure difference
between point M and N.
a. 1.009 kPa
b. 1.118 kPa
c. 1.003 kPa
d. 1.094 kPa
Not Attempt Correct Ans. b
FAQ? Have any doubt? Solution
Q.9
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1349&t=cont1&testType=2 2/5
2/12/2017 MADE EASY ONLINE TEST SERIES
The x and y components in a 3dimensional incompressible flow are given by u
a. (x + y)2
b. x2 + z2
c. –2(xz + yz)
d. –2(xy – xz)
Not Attempt Correct Ans. c
FAQ? Have any doubt? Solution
Q.10 A Pitot tube is inserted in a pipe of 30 cm diameter. The static pressure of the
tube is 10 cm of mercury, vacuum. The stagnation pressure at the centre of
the pipe recorded by the Pitot tube is 1.0 N/cm2 . Calculate the rate of flow of
water through the pipe, if the mean velocity of flow is 0.85 times the central
velocity. Assume coefficient of the tube to be 0.98.
a. 0.503 m3 /s
b. 0.402 m3 /s
c. 0.302 m3 /s
d. 0.202 m3 /s
Not Attempt Correct Ans. b
FAQ? Have any doubt? Solution
Q.11 A vertical venturimeter 40 cm × 20 cm is provided in a vertical pipe to
measure the flow of oil of relative density 0.80. The difference in elevations of
the throat section and entrance section is 0.5 m, the direction of flow of oil
being vertically upwards. The oil mercury differential gauge shown deflection
of mercury (SHg = 13.6) equal to 40 cm as shown in figure. The quantity of oil
flowing in the pipe (Neglect losses).
a. 624.8 L/s
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1349&t=cont1&testType=2 3/5
2/12/2017 MADE EASY ONLINE TEST SERIES
b. 564.32 L/s
c. 263.3 L/s
d. 363.3 L/s
Not Attempt Correct Ans. d
FAQ? Have any doubt? Solution
Q.12 A tank and a deflector are placed on a frictionless trolley. The tank issues
water jet (mass density of water = 1000 kg/m3 ), which strikes the deflector
and turns by 30°. If the velocity of jet leaving the deflector is 4 m/s and
discharge is 0.1 m3 /s, the force recorded by spring will be
a. 100 N
b.
c. 200 N
d.
Not Attempt Correct Ans. d
FAQ? Have any doubt? Solution
Q.13 A cyclindrical container whose weight is 65 N is inverted and pressed into the
water, as shown in given figure. Assume pressure variation in cylinder is
neligible, then the differential height(h) of the manometer is __________ cm.
Q.14
A particle moves along a curve whose parametric equations are x = t3 + 2t, y =
– 3e–2t and z = 2 sin(5t ), where x, y and z show variations of distance covered
by the particle (in cm) with time t (in s). The magnitude of the acceleration of
particle (in cm/s2 ) at t = 0 is ____________ .
Q.15 Water is flowing from a garden hose. A child places his thumb to cover most of
the hose outlet, causing a thin jet of high speed water to emerge. The pressure
in the hose just upstream of his thumb is 400 kPa. If the hose is held upward,
then the maximum height (in m) that the jet could achieve is________.
Q.16 A 0.25 m diameter pipe carries oil of specific gravity 0.8 at the rate of 120
litres per second and the pressure at a point (A) is 19.62 kN/m2 (gauge). If (A)
is 3.5 m above the datum line, then the total energy at point (A) in meters of oil
is ____________.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1349&t=cont1&testType=2 5/5