Professional Documents
Culture Documents
P R O T E U S
FOR BEGINNERS
INTRODUCTION AND
INSTALLATION
CREATING A
WHAT IS PROTEUS? INSTALLATION USER INTERFACE
PROJECT
WHAT IS PROTEUS? Proteus Design Suite is a
simulation software created by
Labcenter Electronics. The earliest
version of this software started in
1988, as PC-B that runs on MS-DOS,
made by John Jameson. Its primary
function is to create schematic
diagrams, simulate circuit diagrams
and PCB.
PROTEUS
SYSTEM REQUIREMENTS
To download Proteus Software and for it to run smoothly, the
system must meet these specifications:
• 2 GHz or better processor
• 3 GB RAM (8 GB recommended)
• Windows 7 to latest OS Version
• Graphics Card that can support OpenGL v. 2.0 or higher
• 1 GB of Disk Space (Minimum)
INSTALLATION PROCESS
We can download Proteus from the official webpage of Labcenter
Electronics, but it is only in Demo Version, which has limited
capabilities. Some websites also offer a free downloadable full version
of this app, but beware of malicious sites that may harm your system.
STEP 1
Download the
full version software
from trusted sites.
After downloading
the software, open
the file location of
the software.
STEP 2
Double-click the downloaded file and then click “Allow Changes to the
System.” After that, choose the file folder you want the downloaded
file to be installed, and then click the Next button. Another prompt
will pop out and it will ask which folder would you like to set-up the
program’s shortcut. Click the Next button again.
STEP 3
The installation
process shall begin
and wait until it's
finished.
STEP 4
Step 1
Step 2
Step 3
STEP 1
To create a new
project in Proteus,
click the Proteus 8
Professional icon,
then click New
Project.
STEP 2
Select your
desired schematic
template from the
provided list. You
can also choose Do
not to create a
schematic if you will
not use or need a
schematic template.
STEP 4
A summary box
will appear to confirm
the details of your
desired project. If the
shown details are
correct, click Finish.
STEP 6
MODE BAR
The Mode Bar displays all function
and editing mode options needed in
altering, creating, or editing the circuit.
Some of these modes are Selection
Mode, Component Mode, Junction Dot
Mode, Wire Label Mode, Text Script
Mode, etc.
TOOL BAR
The Tool Bar contains the tools like Zoom In, Zoom Out,
Undo, Redo, Copy, Cut, Paste, etc.
STEP 1
To create a
circuit, right-click on
the Editing Window,
then select Place.
Then Components,
then From Libraries.
STEP 2
A list of components
will show up. Select the
component or part by
double-clicking it. To find
these components faster,
you can search them in
the search bar in the
upper left corner.
STEP 3
To connect the
components by wire, left-click
an end of the element or
module, then move the cursor
towards another part, then
right-click when it finally
touches the other end of the
other component.
STEP 5
Double-click any
component to change
its values.
STEP 6
To simulate the
circuit, press the Play
button in the lower-
left part of the screen,
below the Menu Bar.
POP-UP QUIZ
Multiple Choice
1. What shows or presents the overview or the entirety of the drawn circuit in the Editing Window?
a.) Object Selector c.) Mode Bar
b.) Overview Window d.) Tool Bar
2. Displays all function and editing mode options needed in altering, creating, or editing the circuit.
a.) Object Selector c.) Mode Bar
b.) Overview Window d.) Tool Bar
3. Consumes the majority of the screen. It is where the components are gathered and visualized.
a.) Object Selector c.) Mode Bar
b.) Overview Window d.) Editing Window
4. Contains the tools like Zoom In, Zoom Out, Undo, Redo, Copy, Cut, Paste, etc.
a.) Object Selector c.) Mode Bar
b.) Overview Window d.) Tool Bar
5 Contains the compilation of primary electronic parts and devices such as resistors, capacitors,
motors, relays, microcontrollers, transistors, inductors, etc.
a.) Software c.) Mode Bar
b.) Library d.) Tool Bar
Answer Key: 1. b
2. c
3. d
4. d
5. b
UNIT D 2467 URDANETA RD, MAKATI, METRO
MANILA, PHILIPPINES
erovoutika@gmail.com
+(02)8370 1811
www.facebook.com/erovoutika