You are on page 1of 1

English (GB) Installation and operating instructions

English (GB)

Original installation and operating instructions. 2. Applications


The Grundfos PM 1 is designed for automatic start/
CONTENTS stop control of Grundfos pumps and other pumps for
Page water supply.
1. Symbols used in this document 2 Typical applications are water supply systems and
rainwater systems in
2. Applications 2
• single-family houses
2.1 Liquids 2
• blocks of flats
2.2 Liquid temperature 2
2.3 Operating pressure 2 • summer houses and holiday cottages
• horticulture and gardening
3. Installation 2
3.1 Location 3 • agriculture.

4. Electrical connection 4 2.1 Liquids


4.1 Connecting units with cable and plug fitted 4 Clean, thin, non-aggressive and non-explosive
4.2 Connecting units with no cable and plug liquids without solid particles or fibres that may
fitted 4 attack the unit mechanically or chemically.
4.3 Alternative power supply 4
Examples:
5. Control panel 4 • drinking water
6. Start-up 5 • rainwater.
7. Operation 5
7.1 Normal operation 5 2.2 Liquid temperature
7.2 Power supply failure 5 0 °C - see nameplate.
8. Functions 6 2.3 Operating pressure
8.1 Anti-cycling 6
Max. 10 bar.
8.2 Dry-running protection 6
9. Frost protection 6 3. Installation
10. List of alarms 7
Install the unit on the discharge side of the pump.
11. Technical data 7 See fig. 2.
12. Fault finding chart 8 If pumping from a well, borehole or similar, always fit
a non-return valve on the suction pipe of the pump.
13. Further product information 9
It is recommended to connect the unit to the piping
14. Disposal 9 system using unions.
The outlet connection of the unit can be rotated
Warning 360 °. See fig. 1.
Prior to installation, read these installation The inlet connection is an integrated part of the unit
and operating instructions. Installation and housing.
operation must comply with local The unit has a built-in non-return valve.
regulations and accepted codes of good
practice.

1. Symbols used in this document

Warning
If these safety instructions are not
observed, it may result in personal injury!
TM03 9706 1708

If these safety instructions are not


Caution observed, it may result in malfunction or
damage to the equipment!

Note
Notes or instructions that make the job
easier and ensure safe operation.
Fig. 1 Rotary outlet connection

You might also like