DD(TA) # BK HED BE
Type DD(TA) Elevators Manual
(2020988)
1 of fh Fl ML RM AR A A
Jiangsu Petroleum Machinery Co., Ltd
HHL(ADD): LIRA LED EOUAR ER 23:
'No.23 East Sandun Road, Zhouzhuang Town, Jiangyin City, Jiangsu Province, China
He 36-510-86978701 43 (Fax): 86-510-86978700
BBM CP.C): 214423 http:/ www.jspmgroup.com
E-mail: sales@jspmgroup.com
Escaneado con CamScanner8 xX Contents
1, 7th AS EAAGH Features and Usage Range?
2, SEVER Main Technical Parameter ivexceennenennenenernnennesennennns 3
wevveeee
3, 114}, MX Type Formation and Its Representative Meaning...
4, MAGIA Instruction.
5. MYRIE Maintenance:
Escaneado con CamScanner1. PARE -SIS EHH Features and Usage Range:
DD(TA) AYR 5 SRE BESS Ay (HE RIT HIE A Ae SOT Ph
TE, MS AVMNITERT. PARR API Spec 8C CHI AMR MLE LG IG) HH
EE, BRAIN, JURA AH 0.2%, 24 AI AA RED)
BEER. TR.
DDTA) NB RR—-HMIRAK, HA GB/TIIII0 (RAN TALE
ARMA) PAREN, MEER, RARE, Bt
SE, RAE, REAR.
DD(TA)H BRAM. BIEL POL, AAT. BARS TB
EASE.
The main body of DD(TA) elevator is made of high-strength alloy steel,
processed by special heat treatment as to obtain the good plasticity and tenacity.
It is designed in accordance with API Spec 8C for Drilling and Production
Hoisting Equipment. Its residual deformation-is, not upore than 0.2% through the
max. Test load, and no ‘ ate at Sais formation happen through
‘Non-Destructive Examination after twétySur hots,
Jt is a center latch elevator, up to the standard GB/T19190 Petroleum and
Natural Gas Industries-Drilling and Production Equipment-Hoisting Equipment and
designed on the basis of theory of uniform strength and equipped with the safety
device of spring valve. The DD(TA) elevator is reasonable in design, convenient
in operation and reliable in safety.
The DD(TA) type elevator is a lifting tool utilized in the drilling and
repairing of oil well, applicable to drill pipe, drill collar, tubing or casing.
Escaneado con CamScanner4
| u
F aE
No. Qe
1 2% TH Body 10 Fe ALAM Binge pin retainer | 1
2 | SER Door 1 | SHE MAL4K Hinge pin retainer | 1
3 1% Hinge pin 12 "BIRR link block 2
4 $87 Latch 13 *BSRAIEH link block bolt 2
5 $74 Latch pin 3a PARISI link block bolt 2
6 AHH Latch spring 14 PIRATE link block nut 2
7 4% 4-45 Latch lock Ma | BSRMIIRA link block nut | 2
8 40% $44H latch lock pin 15 FO 4K Cotter pin 2
9 | BURFI Lateh lock spring 16 WH grease fitting Z
Escaneado con CamScanner2, ERRAER Main Technical Parameter:
448 H.-R (Drill Collar Elevator)
eaREAR HTC Wenge | SALE
Collar 0.D | Elevator Recess Dia | pr svatgr Bore Dia. ‘Load
in in in mm kN | tons
2.7/8 — 2.9/16 65.09
3.1/8 — aisné | 7156 | 4. | 46
3.12 — 33/16 81 385 | 65
| 4.1/8 3.11/16 3.13/16 96.84 900 100
43/4 4/4 43/_|sor9a_| 3359 be
5 4.1/2 45/8 117.48
5.1/4 4.3/4 4.718 123.83
5.1/2 5 5.1/8 130.18
53/4 5.18 5.14 | 133.35
| 6 538 Bie 39.70
6.1/4 5.5/8 & ))| Ms" ess
6.12 578 Waa J @ P| iis2.40
63/4 6 63/16 | 157.16
7 6.1/4 6.716 | 163.51
7.1/4 6.1/2 6.1116 | 169.86
72 6.3/4 6.15/16 176.21
73/4 1 73/6 | 182,56 | 1350 | 150
8 714 7.116 _|_18891_| 9959 | 250
8.1/4 7/2 TAIN6 | 195.26
812 73/4 TASN6 | 201,61
9 8.1/8 8.3/8 | 212.73
9.12 8.5/8 8.7/8 | 225.43
9.3/4 8.718 9.8 | 231.78
10 9.1/8 9.3/8 | 238.13
10.3/4 9.5/8 10,18 [257.18
i 10.178 10,3/8 | 263,53
14 103/8 10.5/8 | 269.88
3
Escaneado con CamScanner$kHFA-R (Drill Pipes Elevators)
TORT AEB
| RIACG — | AETAUHRANUSL | Hi -Rbic
BS Type | tooldointDesigna | Drill Pipe Size | Elevator | Max. Working Lond
tion Reference and Style Sign KN Tons
63x69/ O _|_NC26(2.3/81F) 2.3/8EU 2.3/8EU
76x86) O NC31(2.7/81F) 2.7/8EU_ 2.7/8EU.
> NC38.1/21F) 3.,12EU
92108) 0 | “Neanaariy 3.1/2EU, soo | 100
105x109/ O ‘NC26(4FH) 41U. ATU
105x127 O 4EU 4EU 1125 125
118*122/ O ne 4.1/210 4.1/21U0
118«122/ 0 : 4.1/21EU 4.1/21EU | 1350) 150
| 118*134/ 0 NCSO 4.1/2EU 4.1/2EU
131134 O (4.1/21F) SIEU siEU__|2250| 250
1341347 0
BIx34/ O 5.1/2FH SIEU SIEU
144«149/ 0 5.1/2FH 5.1/21EU 5.1/21EU
845 -K( Tubing Elevators)
l; J RATARRET
tons kN
2970 1.05 | 28.58 [28.58
35/0 1315 35.31 [35.31
44/0 1.66 [44.04 | 44.04
50/0 1,90 [50.39 [50.39
An 62/0 2.3/8 62.31 | 62.31
(NU) 75/0 2.78 | 75.01 | 75.01 5
208 312 poosepoose| °° | *
Tero aa 103.58]103.58] 65 | 385
Doro 4 6.66 116.66
29367 O TOSEU | Seiy ae] |
35407 0) 3 r .
4449/7 (atseu 40.08 | 40.08] 125 | 1125
30x367 -66EU__| 48.82 [48,82
Shine Sax 1.90RU |"35.96 [5 2250
69/70 K 5.96 | 250
(EU) 2.3/8EU_| 68.66
715X827 0 2.718 BU oo 896 |
91X98 3 ye | B36
104X117 O FTE 98.02 | 98.02
117X137 5 at WU {110.72 /110.72
1/2 BU [123.47 [193.47
4
Escaneado con CamScanner7 oe BE API Spee 8C 28 1C SE SbIM PATE DF FLILE a2 LIL a1
According to table 1C of API Spec 8C , the dia. of bottom bore(d2) of the upset
tubing elevator could be processed the same as the dia. of top bore(d1).
#848 F-K (Casing Elevators)
ag #HEGn) peeled
Type Tubing O.D = Toms
104/ O 4
116/ O 4.1/2
130/ 0 5
1427/0 5.1/2 900 100
WO 6.5/8 1125 125
181/ O 7
1977 O 7.5/8 a oo
197/ 0 a fs ill 2250 250
222/ O i 858 oe
248/ O S958 3150 350
278/ 10.3/4
303/ 0 1.3/4
3, #8. &X Type Formation and Its Representative Meaning
DD OxOD./0O
TK AT Max, load(kN)
-E4LEL4 Top Bore Dia, mm
“FLEL4 Bottom Bore Dia. mm
fi Elevator
HtFFSL Center Latch
Escaneado con CamScanner4, (AZUM Instruction.
1 ARERR ALA SF»
2. EFA UNEAY AE HAE PMRAT TEN EE BOE PAE GBL, RAE
ET BUR, WA AL UNLSL I HEDR
3. GERURY, aaBan ease, RASA SSL, SEWED ABL
USE, ZEKE Fat EMEA HEFT RT
4. RENIN, SABER OHO T PRE, OF — IBC,
WEASEL AA M, WAL, HHI. BA Pee.
5. REAL a LA AA
6, PARAS CRA) Peale.
7. BEM AR RTS 2mm) » NMSA.
1, Select elevator, which correspond with the spec of drill collar.
2. Before operation, check operation adaptability of elevator when shutting or
opening, and reach ability for latch, and its latch whether be clipped or not. If there are
abnormal phenomena, quickly remove it.
3. When operating if elevator clips drill collar,
not. Especially the latch assembly, should be reliabl
lowering only atthe case of eight clipping $f €attilatch
4, Each main part is checked strictly though flaw detection before dispatch; after
usage for a period or reparation, check each main part whether flaw or vestige happens,
if happens, do not use it.
5, Elevator should vertical hang in working,
6, Over-max load (total of moving load and non-moving load) is forbidden.
7. Use is strictly forbidden when the elevator is found to have cracks or
excessively worm-out surfaces of load-bearing(the total worn-out quantity>2mm).
check each part whether reach or
{ican be operated for lifting or
Escaneado con CamScanner5, #EF 4298 Maintenance:
1. PTT, BCE FSO, Ser ih Al SR.
2, (OWES LAT. VEE, WAAEL AH i. Bor
S FARE GREE, FU EAP
1, Before usage, put it at dry, venting place to prevent from rusting and
damaging.
2. After usage, clean oil dirt at elevator, check each part whether flew, vestige
happens or not, and coat clean lubricating grease, and put it at dry place in house.
ERR RARARA LP, RAIA. BREE
PPR API RP 8B “HEFL AAO ASE EAE RE EIA” PAE
FRRETAME. AO, BRT ATEGT IRA.
AP RBEAA APSA, AU SAC
RAT RAR, AAD A
+ The elevator must not be ‘Bi
fy ‘ired without the technical
pA!
information of our corporation. In case the "pairing factory conduct strict and
proper maintenance and inspection ‘ih Satori! with standard API RP 8B
“recommended process of inspection and maintenance of the elevator”, the elevator
can be welded or repaired.
- When elevator grip pipe, latch lock must be in correct place to prevent it from
skidding
+ Don’t select the spare parts manufactured by other companies. Otherwise our
company is not responsible for quality question,
Escaneado con CamScanner