Professional Documents
Culture Documents
-505H/1- bench motor with hollow shaft, 220 V, 1/4 hp, two speeds
1400/2800 rpm, complete with bored drill chuck
(0.5–6,5mm diameter) and brake disc.
-505H/2- bench motor with hollow shaft, as above, except has speeds
700/1400 rpm.
Spindle
The spindle can be driven by a flywheel or can be combined with a motor.
-505/1- replacement drill chuck for no. 501 and 505, with hollow bore.
501
505R
-44-
2
511A
-511A- post drilling jig, with 3 guide holders and 3 bushings, 1.6 mm diameter, 250 mm long.
The bushings are interchangeable -you can use different diameters with the same jig. (See 512A/D)
For clarinets and oboes.
512AK
Additional Bushings
To be used with no 511A and 512AK
-512A/D- bushings
available separately in:
dia. 1.4 - 2.5mm, 0,1mm steps
-582/1- drilling die for key pins, for drilling of rods and
tubes for the insertion of the cross-pin; complete
with 5 bushings (0.6, 0.7, 0.8, 0.9, 1.0 mm diameter),
bushings hardened and interchangeable.
-45-