Operating Manual: Model: TC - 19 - J, K (96 X 96 MM) Connection Diagram

You might also like

You are on page 1of 2

OPERATING MANUAL

TEMPERATURE CONTROLLER
TC-19

Temperature Controller TC -19


ºC

01 2 3
H

Supply:
230 V AC
+
-
T/C
SET
L N NO C NC

Model : TC - 19 - J,K CONNECTION DIAGRAM


(96 X 96 mm)

Technical Specification
1) MODEL : TC - 19 (Temperature Controller). 5) Relay status : LED indication for relay
2) Display : 4 digit, single display, 7 segment LED. status.
3) Input : J ,K (factory set) 6) Controlling action : TP/ON-OFF
4) Range : J type : 0 - 400°C / 0 - 600°C (factory set). 7) Output : 1 relay, 230V AC, 5A
k type : 0 - 1200°C. 8) Power Supply : 110V TO 250V AC,
50/60Hz (SMPS).
Note :
1) Press key continuously along with or key to set the SETPOINT.
2) The set value is saved by releasing the key during setting procedure.
3) To show the SETPOINT, press key momentarily.
4) Auto out time is 15 SEC. without saving.
5) On normal powering instrument, below given display appears,

POWER ON SET POINT SETTING


8. 8. 8. 8 display for 2 sec 5 0 process value
press + key to set SET point
t C j display for 2 sec, according
to the input sensor programmed. 2 0 0 on releasing SET key will store
T P display for 2 sec the latest set value

5 0 Process Value 5 0 process value

Page - 1 www.multispanindia.com
Downloaded from www.Manualslib.com manuals search engine
CONTROL PARAMETER

P a s S Password Message
0 0 3 7
IF TP SELECTED IF ON-OFF SELECTED

Proportional P b H y s t Hysteresis
Band 0 0 0 5 0 0 0 3

Cycle Time C T Press Set key


0 0 0 8 to save & exit

Manual M R
Reset 0 0 0 0

Press Set key


to save & exit

USER CONFIGURATION OFFSET SETTING

P a s S Password Message
0 0 7 3
P a s S Password Message
0 0 0 0 * Ask to company person
I N P T Input
h
( J/K)
J /
O F S T OFF-SET
0 0 0 0
C T R L Control Action
TP T P / O N 0 F ON-OFF
Press Set key
Press Set key to save & exit
to save & exit

SENSOR BREAK / OPEN MESSAGE


O P e n ‘Open’ message display when the
Sensor is not properly connected
or breakdown.

Product improvement and upgrade is a constant procedure. So for more updated operating information and support, please
contact our Helpline : 079 - 22770865 / 3797 or Email at marketing@multispanindia.com
Page - 2 www.multispanindia.com
Downloaded from www.Manualslib.com manuals search engine

You might also like