Professional Documents
Culture Documents
Aim:
To calculate the Z and Y parameters of the two port network.
Circuit to be used:
2. Connect the voltage source at V2 and kept open to V1. The I1 will become zero,
measure V1, V2 and I2 using Voltmeters and Ammeters. Calculate Z12 and Z22.
2. Connect the voltage source at V2 and kept short to V1. The V1 will become zero,
measure V2, I1 and I2 using Voltmeters and Ammeters. Calculate Y12 and Y22.
Observations:
For Z Parameters:
Z Matrix values:
For Y Parameters:
Y Matrix values:
Part 1:
Design the circuit and take the appropriate values of R, L, C and Voltage Source, then fill the
table of Apparatus/Elements used according to the circuit designed and calculate Y and Z
parameters theoretically. Submit the circuit designed, Apparatus Table and the results and
calculation of Y Z Parameters.
Part 2:
Simulate the circuit using PSIM/Simulation software and fill the observation table. Calculate
Y and Z Parameters. Submit the screenshot of the circuit and simulation results in a pdf file
with the observation table and the results of Y Z Parameters.