Professional Documents
Culture Documents
ASSIGNMENT NO: 2
PROF. HARDIK M. SHAH (LME) & PROF. PAVAN S. PATEL (SR. LME)
B.S. PATEL POLYTECHNIC 1
B. S. PATEL POLYTECHNIC & INSTITUTE OF TECHNOLOGY,
GANPAT UNIVERSITY, KHERVA
DEPARTMENT OF MECHANICAL AND MECHATRONICS ENGINEERING
6TH SEMESTER SUB: - HYDRAULICS & PNEUMATICS (1ME2603)
ASSIGNMENT NO: 3
(1) Draw hydraulic circuit to control double acting cylinder using 4/3 DCV.
Explain it.
(2) Explain any two synchronizing circuits used for two cylinders.
(3) Draw regenerative circuit for drilling machine with hydraulic circuit.
(4) Draw meter-in circuit. Explain it with its advantages.
(5) Draw automatic cylinder reciprocation circuit.
(6) Draw and explain: two hand safety control circuit
ASSIGNMENT NO: 4
(1) State classification of air compressor and explain vane compressor with
diagram.
(2) Draw symbols of followings: DCV (3/2, 4/2, 5/2, 4/3), FRL, NRV, PRV,
Variable type air compressor, shuttle valve, non-return type flow control
valve, Quick exhaust valve, single acting cylinder with spring return, double
acting cylinder with cushion, double acting cylinder with through rod, shut
off valve,
(3) Explain FRL unit with its symbol.
(4) Draw and explain piping layout.
(5) Classify pneumatic cylinders and explain double acting cylinder with neat
sketch.
(6) Classify air motors and explain Gerotor motor with its line diagram.
(7) Explain with neat sketch 3/2 direction control spool valve.
(8) Explain with neat sketch 4/2 direction control valve.
(9) Explain with neat sketch 5/2 direction control valve.
(10) Explain with neat sketch NRV (Non-Return Valve) with spring.
(11) Explain with neat sketch time delay valve.
PROF. HARDIK M. SHAH (LME) & PROF. PAVAN S. PATEL (SR. LME)
B.S. PATEL POLYTECHNIC 2
B. S. PATEL POLYTECHNIC & INSTITUTE OF TECHNOLOGY,
GANPAT UNIVERSITY, KHERVA
DEPARTMENT OF MECHANICAL AND MECHATRONICS ENGINEERING
6TH SEMESTER SUB: - HYDRAULICS & PNEUMATICS (1ME2603)
ASSIGNMENT NO: 5
(1) Draw and explain speed control meter in and meter out circuit.
(2) Draw and explain automatic cylinder reciprocating circuit.
(3) Draw and explain quick exhaust circuit.
(4) Draw and explain two step feed control circuit.
(5) Draw and explain time delay circuit.
(6) Write steps involved in Classic method to design pneumatic circuits.
(7) Write steps involved in Cascade method to design pneumatic circuits.
(8) Explain pressure switch with its diagram.
(9) Draw and explain reciprocating of double acting cylinder using pressure
switch and limit switch.
ASSIGNMENT NO: 6
PROF. HARDIK M. SHAH (LME) & PROF. PAVAN S. PATEL (SR. LME)
B.S. PATEL POLYTECHNIC 3
B. S. PATEL POLYTECHNIC & INSTITUTE OF TECHNOLOGY,
GANPAT UNIVERSITY, KHERVA
DEPARTMENT OF MECHANICAL AND MECHATRONICS ENGINEERING
6TH SEMESTER SUB: - HYDRAULICS & PNEUMATICS (1ME2603)
ASSIGNMENT NO: 7
ASSIGNMENT NO: 8
PROF. HARDIK M. SHAH (LME) & PROF. PAVAN S. PATEL (SR. LME)
B.S. PATEL POLYTECHNIC 4