Professional Documents
Culture Documents
Flat Washer, Low Carbon, Narrow, Type B, Zinc, Manufactured in the USA
This product standard contains the required dimensional, mechanical, performance, and chemical characteristics of the products shown
in this purchase order (as applicable to the product). Unless specified below, current revisions of national or international standards
shall be applicable as of the date of Fastenal’s purchase order and must be adhered to in their entirety. If the order received does not
meet these requirements, corrective action may be issued which could jeopardize your status as an approved supplier to Fastenal.
ID OD TH
Inside Diameter Outside Diameter Thickness
Size
Tolerance Tolerance
Basic Basic Max. Min.
Plus Minus Plus Minus
#0 .068 .000 .005 .125 .000 .005 .028 .022
#1 .084 .000 .005 .156 .000 .005 .028 .022
#2 .094 .000 .005 .188 .000 .005 .028 .022
#3 .109 .000 .005 .219 .000 .005 .028 .022
#4 .125 .000 .005 .250 .000 .005 .036 .028
#5 .141 .000 .005 .281 .000 .005 .036 .028
#6 .156 .000 .005 .312 .000 .005 .036 .028
#8 .188 .008 .005 .375 .008 .005 .045 .036
#10 .203 .008 .005 .406 .008 .005 .045 .036
#12 .234 .008 .005 .438 .008 .005 .045 .036
1/4 .281 .015 .005 .500 .015 .005 .071 .056
5/16 .344 .015 .005 .625 .015 .005 .071 .056
3/8 .406 .015 .005 .734 .015 .007 .071 .056
7/16 .469 .015 .005 .875 .015 .007 .071 .056
1/2 .531 .015 .005 1.000 .015 .007 .071 .056
9/16 .594 .015 .005 1.125 .015 .007 .071 .056
5/8 .656 .030 .007 1.250 .030 .007 .112 .090
3/4 .812 .030 .007 1.375 .030 .007 .112 .090
7/8 .938 .030 .007 1.469 .030 .007 .112 .090
1 1.062 .030 .007 1.750 .030 .007 .112 .090
1 1/8 1.188 .030 .007 2.000 .030 .007 .112 .090
1 1/4 1.312 .030 .007 2.250 .030 .007 .174 .146
1 3/8 1.438 .030 .007 2.500 .030 .007 .174 .146
1 1/2 1.562 .030 .007 2.750 .030 .007 .174 .146
1 5/8 1.750 .030 .007 3.000 .030 .007 .174 .146
Specification Requirements:
Revision Revision
Document Name Rationale for Revision
Level Date
USA.FW.LC.SAE.B.Z 00 5/22/2018 Original document
Removed SAE from Type B washer and revised
USA.FW.LC.N.B.Z 00 8/15/2019
title.
The rationale above may not include all of the changes within each revision. A complete
review of the Fastenal Product Standard is required.