Professional Documents
Culture Documents
O-Ring Specifications
Description
Owen Oil Tools Engineering has four (4) O-Ring Specifications to cover the range of operating conditions generally
encountered in the oil field. Owen will supply only compounds that meet or exceed our engineering specifications.
Please be aware that most catalog pages list only the O-Ring compound required for standard duty services.
Always determine the most suitable compound for your operating conditions. Some conditions that determine the
recommended O-Ring and seal system are as follows:
• Maximum Pressure • CO2 and/or H2S presence
• Minimum Sealing Temperature • Acids presence
• Maximum Sealing Temperature • Maximum Exposure Time
• Methane and/or other Natural Gases present
PEEK
Nominal Max Temp, Max Temp,
Owen Engineering Min Temp Backups
Service Class Durometer Compound 1 hr (2) 100 hr (3)
Specification (1) Above (4)
(Shore A)
F C F C F C (psi)
Standard OES-N569-000 90 Nitrile - Peroxide Cured -40 -40 300 150 275 135 20,000
High Temperature OES-V569-000 90 Viton - Fluorocarbon -5 -23 450 230 400 200 20,000
High Temperature OES-V570-000 95 Viton - Fluorocarbon 0 -17 450 230 400 200 20,000
Hostile Environment OES-A569-000 95 AFLAS (5) 200 93 500 260 450 230 Always
Environments
H2S NR B A A
CH4 (Methane) C A B A
Hydrocarbon
A A A A
(sweet crude)
Alcohols A C C B
Inhibitors B NR NR A
Salt Water A A A A
Steam (1) NR NR NR B
Diesel B A A B
eng-3.0 R01 ©2007, 2016 Owen Oil Tools All rights reserved