Professional Documents
Culture Documents
2. An electric stove with four burners and an oven is used in preparing a meal as follows.
If each burner is rated at 1.2 kW and the oven at 1.8 kW, and electricity costs 12 paise per kWh,
calculate the cost of electricity used in preparing the meal.
Page 1 of 6
5. Find Req and io in the circuit of Figure.
7. Obtain the equivalent resistance in each of the circuits of Fig. (a) and (b). In (b), all resistors have a
value of 30 Ω
Page 2 of 6
8. Find and Req and I in the circuit of Fig.
9. As a design engineer, you are asked to design a lighting system consisting of a 70-W power supply and
two light bulbs as shown in Fig. You must select the two bulbs from the following three available bulbs.
The system should be designed for minimum cost such that lies within the range I= 1.2 A ± 5 percent.
Page 3 of 6
10. Calculate the non-reference node voltages in the circuit of following Figures using nodal analysis.
11. For the circuit shown in Figures, find the i0 using nodal analysis.
Page 4 of 6
io
14. For the circuit shown in Fig., find the node voltages by inspection method.
Page 5 of 6
15. For the circuit shown in Figures, find the mesh currents i1, i2, and i3,.
Page 6 of 6