Professional Documents
Culture Documents
Safety Helmet
Technical Data Sheet TECHNICAL DATASHEET
HC43 SERIES SAFETY HELMET
Description
The Australian made 3M™ HC43 series ABS safety helmet
(Type 1) with comfortable 6 point terylene head harness is
designed to deflect falling objects and provide protection
against heat, knocks and bumps.
stretching and spreading the load evenly over the protected The 3M™ HC43
head harness is designed to deflect falling objects
provide protection against heat, knocks and bumps.
and
Series is certified to AS/NZS 1801:1997 Type 1
spreading the load evenly over the protected area.
The 25mm wide webbing maximises the surface area
The area between the shell and harness is the shock Specifications
Suitable for general use in industry for protection of
the upper part of the wearers head.
ignition by flame and electrial insulation (electrical
hazards up to 650V) when tested in the Hot (50°C),
absorption zone and should not be treated as a storage The HC43 series safety helmet has been designed
Cold (-5°C) and Wet conditions.
Type 1 industrial safety helmets are suitable for general Shell Colours White, Yellow, Red, Orange, Blue,
industry including construction, mining, forestry, heavy Green, Fluoro Yellow, Fluoro Orange
engineering and resource drilling.
Types of Safety Helmets Customisation & Integrity
The scope of AS/NZS 1801:1997 standard specifies 3M’s corporate branding and reflective tape options are
requirement for occupational protective helmets to protect available across the range of Australian made brand safety
wearers heads from falling objects in building and construction, helmets to create and maintain company image and visibility
quarrying, shipbuilding, forestry, and other occupations with on site.
similar hazards. These requirements include the construction
3M’s Australian made brand safety helmets are manufactured
and materials of the helmet shell and head harness, mechanical
under an independently audited scheme to ISO9001. The
strength of the shell and finish of the helmet.
Safety Helmets are licensed and manufactured to AS/NZS
In compliance with the standards objectives to specify 1801:1997. 3M’s logo printing and application of reflective
protective helmets that are worn in a variety of occupations. tape to brand safety helmets does not affect the integrity of
Brand safety helmets are classified into three types: the Safety Helmet.
Compatibility chart
The range of 3M™ safety helmets are compatible with 3M™ brand hearing, eye and face protection. Various 3M™ brand PPE
combinations are Certified (including manufacturer’s Certified accessories) to Australian/New Zealand Standards.
Note: The above provides a guide only. Please refer to 3M™ for the comprehensive compatibility listing.
Ordering Information Important Notice
Order No. Model # Description To the extent permitted by law, 3M shall not be liable for any
loss or damage including any loss of business, loss of profits,
AT010701921 HC43:YE Non-vented – Type 1 or for any indirect, special, incidental or consequential loss
Yellow or damage arising from reliance upon any information herein
AT010701913 HC43:WH Non-vented – Type 1 provided by 3M. Nothing in this statement will be deemed to
White exclude or restrict 3M’s liability for death or personal injury
AT010701889 HC43:OR Non-vented – Type 1 arising from its negligence.
Orange
AT010701830 HC43:BL Non-vented – Type 1 Blue
AT010701897 HC43:RD Non-vented – Type 1 Red
AT010701863 HC43:GN Non-vented – Type 1
Green
AT010701855 HC43:FLYE Non-vented – Type 1
Fluoro yellow
AT010701848 HC43:FLOR Non-vented – Type 1
Fluoro orange
AT010702119 HC43L:WH Non-vented – Type 1 w/
poly lamp bracket White
AT010702127 HC43L:YE Non-vented – Type 1 w/
poly lamp bracket Yellow
AT010702069 HC43L:BL Non-vented – Type 1 w/
poly lamp bracket Blue
AT010702085 HC43L:FLYE Non-vented – Type 1 w/
poly lamp bracket Fluoro
yellow
AT010702077 HC43L:FLOR Non-vented – Type 1 w/
poly lamp bracket Fluoro
orange
AT010702275 HC43M:WH Non-vented – Type 1 w/
metal lamp bracket White
AT010702283 HC43M:YE Non-vented – Type 1 w/
metal lamp bracket Yellow
AT010702242 HC43M:OR Non-vented – Type 1
w/ metal lamp bracket
Orange
AT010702200 HC43M:BL Non-vented – Type 1 w/
metal lamp bracket Blue
AT010702259 HC43M:RD Non-vented – Type 1 w/
metal lamp bracket Red
AT010702234 HC43M:GN Non-vented – Type 1 w/
metal lamp bracket Green
AT010702226 HC43M:FLYE Non-vented – Type 1 w/
metal lamp bracket Fluoro
yellow