Professional Documents
Culture Documents
Quality Touch!: Pushbuttons and Selector Switches Series
Quality Touch!: Pushbuttons and Selector Switches Series
!
ELEGANT STYLE AND ERGONOMIC DESIGN
u c h
All the series elements have an ergonomic design and, at the same time,
l i t y t o
particular care has been given to detail aesthetics.
ch !
details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value.
The products described in this publication are subject to be revised or improved at any moment. Catalogue descriptions and
u
MATERIALS RESISTANT TO OILS, SOLVENTS AND
In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for
Qua lit y t o
HYDROCARBONS
10mm
Ø22.3
- Miniaturised size Minimum pitch between drillings: - Total depth, from the external - Low actuator profile - Actuator fixing on the mounting - There is an anti-rotation - The mounting adapter and - Electrical contact and LED
- High electric conductivity - 5V 1mA - 30x40mm for two single actuators mounting surface to the end of The external actuator bezel has a low LOVATO ELECTRIC S.P. A. surface, is obtained using its fastener which collapses inside actuators each have clearly elements are snapped onto the
- Up to 9 contact elements can be on a mounting surface the first contact element is just profile and reduced front thickness. threaded ring, easily rotated by visible reference indications mounting adapter.
installed, 3 rows of 3 elements - 30x55mm for double and 43mm. via Don E. Mazza, 12
the gasket to allow fitting also
- Available versions: Front and base triple-touch actuators or when hand or by socket spanner/wrench. when drilled holes are round making the snap-on fitting between - The activation of the middle
mount with screw terminals while spring clamp contacts are used. 24020 Gorle (Bergamo) Italy without reference index. the two easy and intuitive. contacts is standard supplied on all
PD105 GB 11 16
front-mount only with faston and Follow us non-illuminated spring return and
- The sealing gasket for the actuator
spring-clamp terminals Tel +39 035 4282111 push-push button or selector
mounting surface has a gripping
- Contact operation with double Fax +39 035 4282200 switch actuators.
breaking action, direct (positive) action (suction effect) offering
info@LovatoElectric.com additional adhesion properties.
opening action and wiping effect.
www.LovatoElectric.com
Pushbuttons and selector
HIGH DEGREE OF PROTECTION
- IP66: Powerful water jets PUSHBUTTONS AND switches Ø22mm
- IP67: Water immersion at one metre
- IP69K: Powerful water jets at high pressure and temperature
- Type 4X: UL/CSA directives in regards powerful water jets.
SELECTOR SWITCHES
SERIES
!
ELEGANT STYLE AND ERGONOMIC DESIGN
u c h
All the series elements have an ergonomic design and, at the same time,
l i t y t o
particular care has been given to detail aesthetics.
ch !
details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value.
The products described in this publication are subject to be revised or improved at any moment. Catalogue descriptions and
u
MATERIALS RESISTANT TO OILS, SOLVENTS AND
In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for
Qua lit y t o
HYDROCARBONS
10mm
Ø22.3
- Miniaturised size Minimum pitch between drillings: - Total depth, from the external - Low actuator profile - Actuator fixing on the mounting - There is an anti-rotation - The mounting adapter and - Electrical contact and LED
- High electric conductivity - 5V 1mA - 30x40mm for two single actuators mounting surface to the end of The external actuator bezel has a low LOVATO ELECTRIC S.P. A. surface, is obtained using its fastener which collapses inside actuators each have clearly elements are snapped onto the
- Up to 9 contact elements can be on a mounting surface the first contact element is just profile and reduced front thickness. threaded ring, easily rotated by visible reference indications mounting adapter.
installed, 3 rows of 3 elements - 30x55mm for double and 43mm. via Don E. Mazza, 12
the gasket to allow fitting also
- Available versions: Front and base triple-touch actuators or when hand or by socket spanner/wrench. when drilled holes are round making the snap-on fitting between - The activation of the middle
mount with screw terminals while spring clamp contacts are used. 24020 Gorle (Bergamo) Italy without reference index. the two easy and intuitive. contacts is standard supplied on all
PD105 GB 11 16
front-mount only with faston and Follow us non-illuminated spring return and
- The sealing gasket for the actuator
spring-clamp terminals Tel +39 035 4282111 push-push button or selector
mounting surface has a gripping
- Contact operation with double Fax +39 035 4282200 switch actuators.
breaking action, direct (positive) action (suction effect) offering
info@LovatoElectric.com additional adhesion properties.
opening action and wiping effect.
www.LovatoElectric.com
Pushbuttons, spring return Mushroom head buttons Auto-monitor Selector switches
FOR EMERGENCY STOPPING ISO 13850 COMPLIANT. FOR NORMAL STOPPING. KNOB LEVER KNOB CAP
Accessories
FLUSH LPC B10 _ EXTENDED LPC B20 _ SHROUDED LPC B30 _ Screw termination.
2 2 2 2 position 3 position 2 position 3 position 2 position 3 position
Ø30mm. Turn to release. Ø40mm. Turn to release. Ø40mm. Turn to release. Without mounting adapter.
3 3 3 LPC S1_ _ LPC S1_ _ LPC S2_ _ LPC S2_ _ LPC S4_ _ LPC S4_ _
LPC B6634 LPC B6644 LPC B634 _ Auto-monitor contact elements
4 4 4 for non-illuminated latch
20 30 20 30 20 30
5 5 5 2 21 31 21 31 21 31
mushroom-head pushbuttons.
6 6 6 4 32 32 32 Order code Description Order code Description Order code Description
8 8 8 33 33 33
KEY Type of positions and rotation angles LPX A127 Transparent diffuser for LPXQ0 Flush-extended push-push Flush lens for illuminated spring-return
2 position 3 position Maintained position double-touch buttons actuator with no cap actuators.
interfaces
23 52 RESET 96 LPC B6844 LPC B6842 LPX BL206
II 28 Types available with 5 .3 .1 .1 .
buttons, LPC.. R type Extended cap for spring-return actuators. LPX BL205 Yellow
58
different key codes; add “R” 3 POSITION KNOB LPX B202 Black LPX BL206 Blue
2 POSITION KNOB LPX B0 Flush-extended spring return
suffix to order code and 2NC actuator with no cap or lens LPX B203 Green LPX BL207 Transparent
complete with numeric code
LPC SL12_ _ LPC SL13_ _ LPC SL13_ _
spring return
5 5 4 LPX AU100 LPX AU105 LPX AU109
RESET LPC R1196 5 LPX AU105 Label holder for blank or engraved LPX AU108 label
Push-push buttons
6 6 6 5
LPX AU108 Engravable silver plastic label to use with LPX AU105 holder
6
8 2 FLUSH 1 EXTENDED AND 1 FLUSH 2 EXTERNAL FLUSH AND 1 MIDDLE EXTENDED LPX AU13 Rubber boot for flush button LPC B1/BL1/R1...
LPC B71_ _ LPC B72_ _ LPC B73_ _ LPC B73_ _ LPX AU14 Rubber boot for buttons LPC B2/B3/BL2/R2...
12 12 LPX AU157 Rubber boot for double and triple-touch buttons, transparent LPX AU113 LPX AU110
FLUSH LPC Q10 _ EXTENDED LPC Q20 _
2 2 — 13 — 13 STOP 45 STOP 65 LPX AU167 Rubber boot for mush-room head buttons,
EXTENDED 14 14 Order code Text
Plastic control stations without actuators Metal control stations without actuators
3 3 LPC B63/B66/B67/BL66..., transparent
4 4 LPC R2004 22 22 LPX AU158 8 LM2T A185 LPX AU158 Padlockable protection, Ø5-8mm locks for buttons
5 5 I-0 23 I-0 23 LPC B66/B67/B68/BL66...; for LPC B34... Ø5-6mm locks only LPX AU113 EMERGENCY/STOP Ø90mm
LPZ M_ _ _ LPZ M_ _ _ 24 24
STOP 55 STOP 75
6 6 LPZ P_ _ _ LPZ P_ _ _ LPX AU159 Shroud for buttons LPC B63..., LPC B66/67/68/BL66... LPX AU115 EMERGENCY/STOP Ø60mm
8 8 NOTE: contact elements 1A5 for 1 actuator 3A8 for 3 actuators START/STOP 33 START/STOP 33
1A5 for 1 actuator 4A8 for 4 actuators
1A5P for 1 actuator shrouded 4A8 for 4 actuators LPX DIN Adapter for mounting LPC... buttons on DIN rail 35mm/1.38” LPX AU118 ARRET D’URGENCE / NOT-AUS /
can be mounted. PARO EMERGENCIA Ø60mm
1A8 for 1 actuator 5A8 for 5 actuators
1A8 for 1 actuator 5A8 for 5 actuators wide (2 modules)
Contact elements Mounting LED elements Joysticks (IP65) Pulse and steady tone LED integrated monoblock
holder General use. For selector switches.
adapter
8 LM2T AGB226 RESET
!
210 410
h
.6 break LPC ZSE IP 8 LM2T AU205 I-O-II
c
85-140VAC/DC
t ou
8 LM2T AGB223 ON 8 LM2T AU201 I
lit y
MOUNTING: Frontal Frontal Frontal Frontal Mounting adapter for contact and LED
a
MOUNTING: Frontal Frontal Frontal Frontal 185-265VAC/DC LPC ZSM IP
Qu
8 LM2T AGB211 OPEN Recommended use with LPX AU109 blank label.
TERMINATION: Screw Screw Spring (push-in technology) Faston elements with actuators. TERMINATION: Screw Screw Spring Screw 211 411 8 LM2T AU202 II
IP40: 90dB sound intensity at 10 cm. 8 LM2T AGB229 POWER ON Complete code with required label text.
MOUNTING ADAPTER: With Without Without Without Allows mounting also on control LIGHT: Flashing Steady Steady Steady
station cover. PROTECTION: Against overvoltages and stray currents in wiring, to reduce flickering phenomenon and withstand vibrations Against overvoltages and to withstand vibrations Instable positions Stable positions
IP66: 80dB sound intensity at 10 cm. 8 LM2T AGB227 RAISE
Pushbuttons, spring return Mushroom head buttons Auto-monitor Selector switches
FOR EMERGENCY STOPPING ISO 13850 COMPLIANT. FOR NORMAL STOPPING. KNOB LEVER KNOB CAP
Accessories
FLUSH LPC B10 _ EXTENDED LPC B20 _ SHROUDED LPC B30 _ Screw termination.
2 2 2 2 position 3 position 2 position 3 position 2 position 3 position
Ø30mm. Turn to release. Ø40mm. Turn to release. Ø40mm. Turn to release. Without mounting adapter.
3 3 3 LPC S1_ _ LPC S1_ _ LPC S2_ _ LPC S2_ _ LPC S4_ _ LPC S4_ _
LPC B6634 LPC B6644 LPC B634 _ Auto-monitor contact elements
4 4 4 for non-illuminated latch
20 30 20 30 20 30
5 5 5 2 21 31 21 31 21 31
mushroom-head pushbuttons.
6 6 6 4 32 32 32 Order code Description Order code Description Order code Description
8 8 8 33 33 33
KEY Type of positions and rotation angles LPX A127 Transparent diffuser for LPXQ0 Flush-extended push-push Flush lens for illuminated spring-return
2 position 3 position Maintained position double-touch buttons actuator with no cap actuators.
interfaces
23 52 RESET 96 LPC B6844 LPC B6842 LPX BL206
II 28 Types available with 5 .3 .1 .1 .
buttons, LPC.. R type Extended cap for spring-return actuators. LPX BL205 Yellow
58
different key codes; add “R” 3 POSITION KNOB LPX B202 Black LPX BL206 Blue
2 POSITION KNOB LPX B0 Flush-extended spring return
suffix to order code and 2NC actuator with no cap or lens LPX B203 Green LPX BL207 Transparent
complete with numeric code
LPC SL12_ _ LPC SL13_ _ LPC SL13_ _
spring return
5 5 4 LPX AU100 LPX AU105 LPX AU109
RESET LPC R1196 5 LPX AU105 Label holder for blank or engraved LPX AU108 label
Push-push buttons
6 6 6 5
LPX AU108 Engravable silver plastic label to use with LPX AU105 holder
6
8 2 FLUSH 1 EXTENDED AND 1 FLUSH 2 EXTERNAL FLUSH AND 1 MIDDLE EXTENDED LPX AU13 Rubber boot for flush button LPC B1/BL1/R1...
LPC B71_ _ LPC B72_ _ LPC B73_ _ LPC B73_ _ LPX AU14 Rubber boot for buttons LPC B2/B3/BL2/R2...
12 12 LPX AU157 Rubber boot for double and triple-touch buttons, transparent LPX AU113 LPX AU110
FLUSH LPC Q10 _ EXTENDED LPC Q20 _
2 2 — 13 — 13 STOP 45 STOP 65 LPX AU167 Rubber boot for mush-room head buttons,
EXTENDED 14 14 Order code Text
Plastic control stations without actuators Metal control stations without actuators
3 3 LPC B63/B66/B67/BL66..., transparent
4 4 LPC R2004 22 22 LPX AU158 8 LM2T A185 LPX AU158 Padlockable protection, Ø5-8mm locks for buttons
5 5 I-0 23 I-0 23 LPC B66/B67/B68/BL66...; for LPC B34... Ø5-6mm locks only LPX AU113 EMERGENCY/STOP Ø90mm
LPZ M_ _ _ LPZ M_ _ _ 24 24
STOP 55 STOP 75
6 6 LPZ P_ _ _ LPZ P_ _ _ LPX AU159 Shroud for buttons LPC B63..., LPC B66/67/68/BL66... LPX AU115 EMERGENCY/STOP Ø60mm
8 8 NOTE: contact elements 1A5 for 1 actuator 3A8 for 3 actuators START/STOP 33 START/STOP 33
1A5 for 1 actuator 4A8 for 4 actuators
1A5P for 1 actuator shrouded 4A8 for 4 actuators LPX DIN Adapter for mounting LPC... buttons on DIN rail 35mm/1.38” LPX AU118 ARRET D’URGENCE / NOT-AUS /
can be mounted. PARO EMERGENCIA Ø60mm
1A8 for 1 actuator 5A8 for 5 actuators
1A8 for 1 actuator 5A8 for 5 actuators wide (2 modules)
Contact elements Mounting LED elements Joysticks (IP65) Pulse and steady tone LED integrated monoblock
holder General use. For selector switches.
adapter
8 LM2T AGB226 RESET
!
210 410
h
.6 break LPC ZSE IP 8 LM2T AU205 I-O-II
c
85-140VAC/DC
t ou
8 LM2T AGB223 ON 8 LM2T AU201 I
lit y
MOUNTING: Frontal Frontal Frontal Frontal Mounting adapter for contact and LED
a
MOUNTING: Frontal Frontal Frontal Frontal 185-265VAC/DC LPC ZSM IP
Qu
8 LM2T AGB211 OPEN Recommended use with LPX AU109 blank label.
TERMINATION: Screw Screw Spring (push-in technology) Faston elements with actuators. TERMINATION: Screw Screw Spring Screw 211 411 8 LM2T AU202 II
IP40: 90dB sound intensity at 10 cm. 8 LM2T AGB229 POWER ON Complete code with required label text.
MOUNTING ADAPTER: With Without Without Without Allows mounting also on control LIGHT: Flashing Steady Steady Steady
station cover. PROTECTION: Against overvoltages and stray currents in wiring, to reduce flickering phenomenon and withstand vibrations Against overvoltages and to withstand vibrations Instable positions Stable positions
IP66: 80dB sound intensity at 10 cm. 8 LM2T AGB227 RAISE
Pushbuttons, spring return Mushroom head buttons Auto-monitor Selector switches
FOR EMERGENCY STOPPING ISO 13850 COMPLIANT. FOR NORMAL STOPPING. KNOB LEVER KNOB CAP
Accessories
FLUSH LPC B10 _ EXTENDED LPC B20 _ SHROUDED LPC B30 _ Screw termination.
2 2 2 2 position 3 position 2 position 3 position 2 position 3 position
Ø30mm. Turn to release. Ø40mm. Turn to release. Ø40mm. Turn to release. Without mounting adapter.
3 3 3 LPC S1_ _ LPC S1_ _ LPC S2_ _ LPC S2_ _ LPC S4_ _ LPC S4_ _
LPC B6634 LPC B6644 LPC B634 _ Auto-monitor contact elements
4 4 4 for non-illuminated latch
20 30 20 30 20 30
5 5 5 2 21 31 21 31 21 31
mushroom-head pushbuttons.
6 6 6 4 32 32 32 Order code Description Order code Description Order code Description
8 8 8 33 33 33
KEY Type of positions and rotation angles LPX A127 Transparent diffuser for LPXQ0 Flush-extended push-push Flush lens for illuminated spring-return
2 position 3 position Maintained position double-touch buttons actuator with no cap actuators.
interfaces
23 52 RESET 96 LPC B6844 LPC B6842 LPX BL206
II 28 Types available with 5 .3 .1 .1 .
buttons, LPC.. R type Extended cap for spring-return actuators. LPX BL205 Yellow
58
different key codes; add “R” 3 POSITION KNOB LPX B202 Black LPX BL206 Blue
2 POSITION KNOB LPX B0 Flush-extended spring return
suffix to order code and 2NC actuator with no cap or lens LPX B203 Green LPX BL207 Transparent
complete with numeric code
LPC SL12_ _ LPC SL13_ _ LPC SL13_ _
spring return
5 5 4 LPX AU100 LPX AU105 LPX AU109
RESET LPC R1196 5 LPX AU105 Label holder for blank or engraved LPX AU108 label
Push-push buttons
6 6 6 5
LPX AU108 Engravable silver plastic label to use with LPX AU105 holder
6
8 2 FLUSH 1 EXTENDED AND 1 FLUSH 2 EXTERNAL FLUSH AND 1 MIDDLE EXTENDED LPX AU13 Rubber boot for flush button LPC B1/BL1/R1...
LPC B71_ _ LPC B72_ _ LPC B73_ _ LPC B73_ _ LPX AU14 Rubber boot for buttons LPC B2/B3/BL2/R2...
12 12 LPX AU157 Rubber boot for double and triple-touch buttons, transparent LPX AU113 LPX AU110
FLUSH LPC Q10 _ EXTENDED LPC Q20 _
2 2 — 13 — 13 STOP 45 STOP 65 LPX AU167 Rubber boot for mush-room head buttons,
EXTENDED 14 14 Order code Text
Plastic control stations without actuators Metal control stations without actuators
3 3 LPC B63/B66/B67/BL66..., transparent
4 4 LPC R2004 22 22 LPX AU158 8 LM2T A185 LPX AU158 Padlockable protection, Ø5-8mm locks for buttons
5 5 I-0 23 I-0 23 LPC B66/B67/B68/BL66...; for LPC B34... Ø5-6mm locks only LPX AU113 EMERGENCY/STOP Ø90mm
LPZ M_ _ _ LPZ M_ _ _ 24 24
STOP 55 STOP 75
6 6 LPZ P_ _ _ LPZ P_ _ _ LPX AU159 Shroud for buttons LPC B63..., LPC B66/67/68/BL66... LPX AU115 EMERGENCY/STOP Ø60mm
8 8 NOTE: contact elements 1A5 for 1 actuator 3A8 for 3 actuators START/STOP 33 START/STOP 33
1A5 for 1 actuator 4A8 for 4 actuators
1A5P for 1 actuator shrouded 4A8 for 4 actuators LPX DIN Adapter for mounting LPC... buttons on DIN rail 35mm/1.38” LPX AU118 ARRET D’URGENCE / NOT-AUS /
can be mounted. PARO EMERGENCIA Ø60mm
1A8 for 1 actuator 5A8 for 5 actuators
1A8 for 1 actuator 5A8 for 5 actuators wide (2 modules)
Contact elements Mounting LED elements Joysticks (IP65) Pulse and steady tone LED integrated monoblock
holder General use. For selector switches.
adapter
8 LM2T AGB226 RESET
!
210 410
h
.6 break LPC ZSE IP 8 LM2T AU205 I-O-II
c
85-140VAC/DC
t ou
8 LM2T AGB223 ON 8 LM2T AU201 I
lit y
MOUNTING: Frontal Frontal Frontal Frontal Mounting adapter for contact and LED
a
MOUNTING: Frontal Frontal Frontal Frontal 185-265VAC/DC LPC ZSM IP
Qu
8 LM2T AGB211 OPEN Recommended use with LPX AU109 blank label.
TERMINATION: Screw Screw Spring (push-in technology) Faston elements with actuators. TERMINATION: Screw Screw Spring Screw 211 411 8 LM2T AU202 II
IP40: 90dB sound intensity at 10 cm. 8 LM2T AGB229 POWER ON Complete code with required label text.
MOUNTING ADAPTER: With Without Without Without Allows mounting also on control LIGHT: Flashing Steady Steady Steady
station cover. PROTECTION: Against overvoltages and stray currents in wiring, to reduce flickering phenomenon and withstand vibrations Against overvoltages and to withstand vibrations Instable positions Stable positions
IP66: 80dB sound intensity at 10 cm. 8 LM2T AGB227 RAISE
Pushbuttons, spring return Mushroom head buttons Auto-monitor Selector switches
FOR EMERGENCY STOPPING ISO 13850 COMPLIANT. FOR NORMAL STOPPING. KNOB LEVER KNOB CAP
Accessories
FLUSH LPC B10 _ EXTENDED LPC B20 _ SHROUDED LPC B30 _ Screw termination.
2 2 2 2 position 3 position 2 position 3 position 2 position 3 position
Ø30mm. Turn to release. Ø40mm. Turn to release. Ø40mm. Turn to release. Without mounting adapter.
3 3 3 LPC S1_ _ LPC S1_ _ LPC S2_ _ LPC S2_ _ LPC S4_ _ LPC S4_ _
LPC B6634 LPC B6644 LPC B634 _ Auto-monitor contact elements
4 4 4 for non-illuminated latch
20 30 20 30 20 30
5 5 5 2 21 31 21 31 21 31
mushroom-head pushbuttons.
6 6 6 4 32 32 32 Order code Description Order code Description Order code Description
8 8 8 33 33 33
KEY Type of positions and rotation angles LPX A127 Transparent diffuser for LPXQ0 Flush-extended push-push Flush lens for illuminated spring-return
2 position 3 position Maintained position double-touch buttons actuator with no cap actuators.
interfaces
23 52 RESET 96 LPC B6844 LPC B6842 LPX BL206
II 28 Types available with 5 .3 .1 .1 .
buttons, LPC.. R type Extended cap for spring-return actuators. LPX BL205 Yellow
58
different key codes; add “R” 3 POSITION KNOB LPX B202 Black LPX BL206 Blue
2 POSITION KNOB LPX B0 Flush-extended spring return
suffix to order code and 2NC actuator with no cap or lens LPX B203 Green LPX BL207 Transparent
complete with numeric code
LPC SL12_ _ LPC SL13_ _ LPC SL13_ _
spring return
5 5 4 LPX AU100 LPX AU105 LPX AU109
RESET LPC R1196 5 LPX AU105 Label holder for blank or engraved LPX AU108 label
Push-push buttons
6 6 6 5
LPX AU108 Engravable silver plastic label to use with LPX AU105 holder
6
8 2 FLUSH 1 EXTENDED AND 1 FLUSH 2 EXTERNAL FLUSH AND 1 MIDDLE EXTENDED LPX AU13 Rubber boot for flush button LPC B1/BL1/R1...
LPC B71_ _ LPC B72_ _ LPC B73_ _ LPC B73_ _ LPX AU14 Rubber boot for buttons LPC B2/B3/BL2/R2...
12 12 LPX AU157 Rubber boot for double and triple-touch buttons, transparent LPX AU113 LPX AU110
FLUSH LPC Q10 _ EXTENDED LPC Q20 _
2 2 — 13 — 13 STOP 45 STOP 65 LPX AU167 Rubber boot for mush-room head buttons,
EXTENDED 14 14 Order code Text
Plastic control stations without actuators Metal control stations without actuators
3 3 LPC B63/B66/B67/BL66..., transparent
4 4 LPC R2004 22 22 LPX AU158 8 LM2T A185 LPX AU158 Padlockable protection, Ø5-8mm locks for buttons
5 5 I-0 23 I-0 23 LPC B66/B67/B68/BL66...; for LPC B34... Ø5-6mm locks only LPX AU113 EMERGENCY/STOP Ø90mm
LPZ M_ _ _ LPZ M_ _ _ 24 24
STOP 55 STOP 75
6 6 LPZ P_ _ _ LPZ P_ _ _ LPX AU159 Shroud for buttons LPC B63..., LPC B66/67/68/BL66... LPX AU115 EMERGENCY/STOP Ø60mm
8 8 NOTE: contact elements 1A5 for 1 actuator 3A8 for 3 actuators START/STOP 33 START/STOP 33
1A5 for 1 actuator 4A8 for 4 actuators
1A5P for 1 actuator shrouded 4A8 for 4 actuators LPX DIN Adapter for mounting LPC... buttons on DIN rail 35mm/1.38” LPX AU118 ARRET D’URGENCE / NOT-AUS /
can be mounted. PARO EMERGENCIA Ø60mm
1A8 for 1 actuator 5A8 for 5 actuators
1A8 for 1 actuator 5A8 for 5 actuators wide (2 modules)
Contact elements Mounting LED elements Joysticks (IP65) Pulse and steady tone LED integrated monoblock
holder General use. For selector switches.
adapter
8 LM2T AGB226 RESET
!
210 410
h
.6 break LPC ZSE IP 8 LM2T AU205 I-O-II
c
85-140VAC/DC
t ou
8 LM2T AGB223 ON 8 LM2T AU201 I
lit y
MOUNTING: Frontal Frontal Frontal Frontal Mounting adapter for contact and LED
a
MOUNTING: Frontal Frontal Frontal Frontal 185-265VAC/DC LPC ZSM IP
Qu
8 LM2T AGB211 OPEN Recommended use with LPX AU109 blank label.
TERMINATION: Screw Screw Spring (push-in technology) Faston elements with actuators. TERMINATION: Screw Screw Spring Screw 211 411 8 LM2T AU202 II
IP40: 90dB sound intensity at 10 cm. 8 LM2T AGB229 POWER ON Complete code with required label text.
MOUNTING ADAPTER: With Without Without Without Allows mounting also on control LIGHT: Flashing Steady Steady Steady
station cover. PROTECTION: Against overvoltages and stray currents in wiring, to reduce flickering phenomenon and withstand vibrations Against overvoltages and to withstand vibrations Instable positions Stable positions
IP66: 80dB sound intensity at 10 cm. 8 LM2T AGB227 RAISE
Pushbuttons and selector
HIGH DEGREE OF PROTECTION
- IP66: Powerful water jets PUSHBUTTONS AND switches Ø22mm
- IP67: Water immersion at one metre
- IP69K: Powerful water jets at high pressure and temperature
- Type 4X: UL/CSA directives in regards powerful water jets.
SELECTOR SWITCHES
SERIES
!
ELEGANT STYLE AND ERGONOMIC DESIGN
u c h
All the series elements have an ergonomic design and, at the same time,
l i t y t o
particular care has been given to detail aesthetics.
ch !
details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value.
The products described in this publication are subject to be revised or improved at any moment. Catalogue descriptions and
u
MATERIALS RESISTANT TO OILS, SOLVENTS AND
In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for
Qua lit y t o
HYDROCARBONS
10mm
Ø22.3
- Miniaturised size Minimum pitch between drillings: - Total depth, from the external - Low actuator profile - Actuator fixing on the mounting - There is an anti-rotation - The mounting adapter and - Electrical contact and LED
- High electric conductivity - 5V 1mA - 30x40mm for two single actuators mounting surface to the end of The external actuator bezel has a low LOVATO ELECTRIC S.P. A. surface, is obtained using its fastener which collapses inside actuators each have clearly elements are snapped onto the
- Up to 9 contact elements can be on a mounting surface the first contact element is just profile and reduced front thickness. threaded ring, easily rotated by visible reference indications mounting adapter.
installed, 3 rows of 3 elements - 30x55mm for double and 43mm. via Don E. Mazza, 12
the gasket to allow fitting also
- Available versions: Front and base triple-touch actuators or when hand or by socket spanner/wrench. when drilled holes are round making the snap-on fitting between - The activation of the middle
mount with screw terminals while spring clamp contacts are used. 24020 Gorle (Bergamo) Italy without reference index. the two easy and intuitive. contacts is standard supplied on all
PD105 GB 11 16
front-mount only with faston and Follow us non-illuminated spring return and
- The sealing gasket for the actuator
spring-clamp terminals Tel +39 035 4282111 push-push button or selector
mounting surface has a gripping
- Contact operation with double Fax +39 035 4282200 switch actuators.
breaking action, direct (positive) action (suction effect) offering
info@LovatoElectric.com additional adhesion properties.
opening action and wiping effect.
www.LovatoElectric.com
Pushbuttons and selector
HIGH DEGREE OF PROTECTION
- IP66: Powerful water jets PUSHBUTTONS AND switches Ø22mm
- IP67: Water immersion at one metre
- IP69K: Powerful water jets at high pressure and temperature
- Type 4X: UL/CSA directives in regards powerful water jets.
SELECTOR SWITCHES
SERIES
!
ELEGANT STYLE AND ERGONOMIC DESIGN
u c h
All the series elements have an ergonomic design and, at the same time,
l i t y t o
particular care has been given to detail aesthetics.
ch !
details, such as technical and operational data, drawings, diagrams and instructions, etc., do not have any contractual value.
The products described in this publication are subject to be revised or improved at any moment. Catalogue descriptions and
u
MATERIALS RESISTANT TO OILS, SOLVENTS AND
In addition, products should be installed and used by qualified personnel and in compliance with the regulations in force for
Qua lit y t o
HYDROCARBONS
10mm
Ø22.3
- Miniaturised size Minimum pitch between drillings: - Total depth, from the external - Low actuator profile - Actuator fixing on the mounting - There is an anti-rotation - The mounting adapter and - Electrical contact and LED
- High electric conductivity - 5V 1mA - 30x40mm for two single actuators mounting surface to the end of The external actuator bezel has a low LOVATO ELECTRIC S.P. A. surface, is obtained using its fastener which collapses inside actuators each have clearly elements are snapped onto the
- Up to 9 contact elements can be on a mounting surface the first contact element is just profile and reduced front thickness. threaded ring, easily rotated by visible reference indications mounting adapter.
installed, 3 rows of 3 elements - 30x55mm for double and 43mm. via Don E. Mazza, 12
the gasket to allow fitting also
- Available versions: Front and base triple-touch actuators or when hand or by socket spanner/wrench. when drilled holes are round making the snap-on fitting between - The activation of the middle
mount with screw terminals while spring clamp contacts are used. 24020 Gorle (Bergamo) Italy without reference index. the two easy and intuitive. contacts is standard supplied on all
PD105 GB 11 16
front-mount only with faston and Follow us non-illuminated spring return and
- The sealing gasket for the actuator
spring-clamp terminals Tel +39 035 4282111 push-push button or selector
mounting surface has a gripping
- Contact operation with double Fax +39 035 4282200 switch actuators.
breaking action, direct (positive) action (suction effect) offering
info@LovatoElectric.com additional adhesion properties.
opening action and wiping effect.
www.LovatoElectric.com