Professional Documents
Culture Documents
C3-402-015 REVISION 2
ATB PROJ. NO. 1808021
JOB NO. 171003
ATT TANJUNG BIN SDN BHD
SHEET NO. 1 OF 55 SHEETS
DOCUMENT TITLE:
DESIGN CALCULATION
FOR
TRUCK LOADING STATION
YU KCK PW
0 ISSUED FOR APPROVAL
12.11.2010 15.11.2010 16.11.2010
YU KCK PW
1 APPROVED FOR CONSTRUCTION
25.01.2011 26.01.2011 27.01.2011
YU KCK PW
2 AS BUILT
20.07.2012 20.07.2012 20.07.2012
1.0 INTRODUCTION
This calculation covers the design of Truck Loading Station for the proposed ATB Terminal
and Jetty Topside Facilities Project at Tanjung Bin in Mukim Serkat, District of Pontian,
Johor, Malaysia.
The Truck Loading Station is a steel structure building with the dimension of 22m x 21.7m.
The building accommodates two bottom loading bays and one top & bottom loading bay. It
has a pipe rack at the height of 5.5m for service pipes. The height of the eave of the building
is 7.0m. The structure is supported on piled foundation. The structure is designed for
seismic zone 1. The structural is analyzed by FEM using StaadPro software.
4.1 Materials
4.2 Loading
Roof
Imposed load = 0.5 kN/m2
Piping load
Cladding
Node load
Roof
Cp = 0.4
Intensity = 0.4 x 0.75 = 0.3 kN/m2
Node load
****************************************************
* *
* STAAD.Pro V8i SELECTseries1 *
* Version 20.07.06.35 *
* Proprietary Program of *
* Bentley Systems, Inc. *
* Date= DEC 7, 2010 *
* Time= 15:56:29 *
* *
* USER ID: Audex Pte Ltd *
****************************************************
1. STAAD SPACE
INPUT FILE: Truck Loading Station.STD
2. START JOB INFORMATION
3. ENGINEER DATE 22-NOV-10
4. END JOB INFORMATION
5. INPUT WIDTH 79
6. UNIT METER KN
7. JOINT COORDINATES
8. 1 0 0 0; 2 0 0 14; 3 5.8 0 0; 4 5.8 0 14; 5 11.6 0 0; 6 11.6 0 14; 7 17.4 0 0
9. 8 17.4 0 14; 9 0 5 -3.5; 10 0 5 0; 11 0 5 14; 12 0 5 17.5; 13 5.8 5 -3.5
10. 14 5.8 5 0; 15 5.8 5 14; 16 5.8 5 17.5; 17 11.6 5 -3.5; 18 11.6 5 0
11. 19 11.6 5 14; 20 11.6 5 17.5; 21 17.4 5 -3.5; 22 17.4 5 0; 23 17.4 5 14
12. 24 17.4 5 17.5; 25 0 6.45 -4; 26 0 6.45 18; 27 5.8 6.45 -4; 28 5.8 6.45 18
13. 29 11.6 6.45 -4; 30 11.6 6.45 18; 31 17.4 6.45 -4; 32 17.4 6.45 18
14. 33 0 6.5 -3.5; 34 0 6.5 17.5; 35 5.8 6.5 -3.5; 36 5.8 6.5 17.5
15. 37 11.6 6.5 -3.5; 38 11.6 6.5 17.5; 39 17.4 6.5 -3.5; 40 17.4 6.5 17.5
16. 41 0 6.85 0; 42 0 6.85 14; 43 5.8 6.85 0; 44 5.8 6.85 14; 45 11.6 6.85 0
17. 46 11.6 6.85 14; 47 17.4 6.85 0; 48 17.4 6.85 14; 49 0 7.45 6; 50 0 7.45 8
18. 51 5.8 7.45 6; 52 5.8 7.45 8; 53 11.6 7.45 6; 54 11.6 7.45 8; 55 17.4 7.45 6
19. 56 17.4 7.45 8; 57 0 7.55 7; 58 5.8 7.55 7; 59 11.6 7.55 7; 60 17.4 7.55 7
20. 61 0 8.95 6; 62 0 8.95 8; 63 5.8 8.95 6; 64 5.8 8.95 8; 65 11.6 8.95 6
21. 66 11.6 8.95 8; 67 17.4 8.95 6; 68 17.4 8.95 8; 69 0 9.05 7; 70 5.8 9.05 7
22. 71 11.6 9.05 7; 72 17.4 9.05 7; 73 -2 5 -3.5; 74 -2 5 0; 75 -2 5 14
23. 76 -2 5 17.5; 77 -2 6.45 -4; 78 -2 6.45 18; 79 -2 6.5 -3.5; 80 -2 6.5 17.5
24. 81 -2 6.85 0; 82 -2 6.85 14; 83 -2 7.45 6; 84 -2 7.45 8; 85 -2 7.55 7
25. 89 19.4 5 -3.5; 90 19.4 5 0; 91 19.4 5 14; 92 19.4 5 17.5; 93 19.4 6.45 -4
26. 94 19.4 6.45 18; 95 19.4 6.5 -3.5; 96 19.4 6.5 17.5; 97 19.4 6.85 0
27. 98 19.4 6.85 14; 99 19.4 7.45 6; 100 19.4 7.45 8; 101 19.4 7.55 7
28. 104 -2 7.35 5; 105 -2 5 5; 106 19.4 7.35 5; 107 19.4 5 5; 108 -2 7.35 9
29. 109 -2 5 9; 110 19.4 7.35 9; 111 19.4 5 9
30. MEMBER INCIDENCES
31. 1 1 10; 2 10 41; 3 2 11; 4 11 42; 5 3 14; 6 14 43; 7 4 15; 8 15 44; 9 5 18
32. 10 18 45; 11 6 19; 12 19 46; 13 7 22; 14 22 47; 15 8 23; 16 23 48; 100 33 25
33. 101 41 33; 102 49 41; 103 57 49; 104 57 50; 105 50 42; 106 42 34; 107 34 26
34. 108 35 27; 109 43 35; 110 51 43; 111 58 51; 112 58 52; 113 52 44; 114 44 36
35. 115 36 28; 116 37 29; 117 45 37; 118 53 45; 119 59 53; 120 59 54; 121 54 46
36. 122 46 38; 123 38 30; 124 39 31; 125 47 39; 126 55 47; 127 60 55; 128 60 56
37. 129 56 48; 130 48 40; 131 40 32; 200 10 9; 201 11 12; 202 33 9; 203 34 12
38. 204 14 13; 205 15 16; 206 35 13; 207 36 16; 208 18 17; 209 19 20; 210 37 17
39. 211 38 20; 212 22 21; 213 23 24; 214 39 21; 215 40 24; 300 9 13; 301 14 10
40. 302 15 11; 303 12 16; 304 13 17; 305 18 14; 306 19 15; 307 16 20; 308 17 21
41. 309 22 18; 310 23 19; 311 20 24; 312 33 35; 313 34 36; 314 35 37; 315 36 38
42. 316 37 39; 317 38 40; 318 43 41; 319 44 42; 320 45 43; 321 46 44; 322 47 45
43. 323 48 46; 324 49 51; 325 50 52; 326 51 53; 327 52 54; 328 53 55; 329 54 56
44. 400 61 49; 401 69 61; 402 69 62; 403 62 50; 404 61 63; 405 62 64; 406 63 51
45. 407 70 63; 408 70 64; 409 64 52; 410 63 65; 411 64 66; 412 65 53; 413 71 65
46. 414 71 66; 415 66 54; 416 65 67; 417 66 68; 418 67 55; 419 72 67; 420 72 68
47. 421 68 56; 434 74 81; 435 75 82; 436 79 77; 437 81 79; 438 83 104; 439 85 83
48. 440 85 84; 441 84 108; 442 82 80; 443 80 78; 444 74 73; 445 75 76; 446 79 73
49. 447 80 76; 452 73 9; 453 10 74; 454 11 75; 455 76 12; 456 79 33; 457 80 34
50. 458 41 81; 459 42 82; 460 83 49; 461 84 50; 462 74 105; 463 109 105
51. 464 105 104; 466 109 108; 467 90 97; 468 91 98; 469 95 93; 470 97 95
52. 471 99 106; 472 101 99; 473 101 100; 474 100 110; 475 98 96; 476 96 94
53. 477 90 89; 478 91 92; 479 95 89; 480 96 92; 481 89 21; 482 22 90; 483 23 91
54. 484 92 24; 485 95 39; 486 96 40; 487 47 97; 488 48 98; 489 99 55; 490 100 56
55. 491 90 107; 492 111 107; 493 107 106; 495 111 110; 498 109 75; 499 111 91
56. 500 104 81; 501 106 97; 502 108 82; 503 110 98
57. UNIT MMS KN
58. DEFINE MATERIAL START
59. ISOTROPIC STEEL
60. E 199.947
61. POISSON 0.3
62. DENSITY 7.68191E-008
63. ALPHA 6.5E-006
64. DAMP 0.03
65. END DEFINE MATERIAL
66. START GROUP DEFINITION
67. MEMBER
68. _C1 1 TO 16 434 435 464 466 TO 468 493 495
69. _R1 100 TO 131 436 TO 443 469 TO 476 500 TO 503
70. _B1 200 TO 215 301 302 305 306 309 310 318 TO 323 400 TO 403 406 TO 409 412 -
71. 413 TO 415 418 TO 421 444 TO 447 453 454 458 459 477 TO 480 482 483 487 488
72. _B2 300 303 304 307 308 311 TO 317 324 TO 329 404 405 410 411 416 417 452 -
73. 455 TO 457 460 461 481 484 TO 486 489 490
74. END GROUP DEFINITION
75. UNIT METER KN
76. MEMBER PROPERTY BRITISH
77. 1 TO 16 TABLE ST UC254X254X73
78. 100 TO 131 TABLE ST UB406X178X74
79. 300 303 304 307 308 311 TO 317 324 TO 329 452 455 TO 457 460 461 481 -
80. 484 TO 486 489 490 TABLE ST CH150X75X18
81. 200 201 204 205 208 209 212 213 301 302 305 306 309 310 318 TO 323 453 454 -
82. 458 459 482 483 487 488 TABLE ST UB254X146X31
83. 202 203 206 207 210 211 214 215 434 435 446 447 464 466 TO 468 479 480 493 -
84. 495 TABLE ST UC152X152X30
85. 436 TO 445 462 463 469 TO 478 491 492 498 TO 503 TABLE ST UB254X146X31
86. 400 TO 421 TABLE ST TUB1001006.3
87. UNIT MMS KN
88. CONSTANTS
89. BETA 90 MEMB 1 TO 16 202 203 206 207 210 211 214 215 400 403 406 409 412 415 -
90. 418 421 434 435 446 447 464 466 TO 468 479 480 493 495
91. MATERIAL STEEL ALL
92. UNIT METER KN
93. SUPPORTS
94. 1 TO 8 FIXED
95. MEMBER RELEASE
96. 300 303 304 307 308 311 TO 317 324 TO 329 404 405 410 411 416 417 452 455 -
97. 456 TO 457 460 461 481 484 TO 486 489 490 START KFY 0 KFZ 0
98. 300 303 304 307 308 311 TO 317 324 TO 329 404 405 410 411 416 417 452 455 -
99. 456 TO 457 460 461 481 484 TO 486 489 490 END KFY 0 KFZ 0
100. DEFINE UBC LOAD
101. ZONE 0.075 I 1 RWX 8 RWZ 8 STYP 4 NA 1 NV 1
102. SELFWEIGHT 1
103. MEMBER WEIGHT
104. 100 TO 131 202 203 206 207 210 211 214 215 401 402 407 408 413 414 419 420 -
105. 436 TO 443 446 447 469 TO 476 479 480 500 TO 503 UNI 1.1
106. 100 TO 131 401 402 407 408 413 414 419 420 436 TO 443 469 TO 476 500 TO 502 -
107. 503 UNI 2.75
108. 200 201 204 205 208 209 212 213 444 445 477 478 UNI 10
109. DEFINE WIND LOAD
110. TYPE 1 WIND 1
111. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
112. ASCE-7-2002:PARAMS 85.000 MPH 0 1 1 0 0.000 FT 0.000 FT 0.000 FT 1 -
113. 1 40.000 FT 30.000 FT 25.000 FT 2.000 0.010 0 -
114. 0 0 0 0 0.761 1.000 1.000 0.850 0 -
115. 0 0 0 0.866 0.800 -0.550
116. !> END GENERATED DATA BLOCK
117. INT 0.614555 0.614555 0.625063 0.634749 0.643753 0.652179 0.66011 0.667609 -
118. 0.67473 0.681515 0.688 0.694215 0.700185 0.705932 0.711476 0.603623 HEIG 0 -
119. 4.572 5.15815 5.74431 6.33046 6.91662 7.50277 8.08892 8.67508 9.26123 -
120. 9.84739 10.4335 11.0197 11.6059 12.192 12.192
121. TYPE 2 WIND 2
122. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
123. ASCE-7-2002:PARAMS 85.000 MPH 0 1 1 0 0.000 FT 0.000 FT 0.000 FT 1 -
124. 1 40.000 FT 30.000 FT 25.000 FT 2.000 0.010 0 -
125. 0 0 0 0 0.761 1.000 1.000 0.850 0 -
126. 0 0 0 0.866 0.800 -0.550
127. !> END GENERATED DATA BLOCK
128. INT 0.614555 0.614555 0.625063 0.634749 0.643753 0.652179 0.66011 0.667609 -
129. 0.67473 0.681515 0.688 0.694215 0.700185 0.705932 0.711476 HEIG 0 4.572 -
130. 5.15815 5.74431 6.33046 6.91662 7.50277 8.08892 8.67508 9.26123 -
131. 9.84739 10.4335 11.0197 11.6059 12.192
132. <! STAAD PRO GENERATED DATA DO NOT MODIFY !!!
133. ASCE-7-2002:PARAMS 85.000 MPH 0 1 1 0 0.000 FT 0.000 FT 0.000 FT 1 -
134. 1 40.000 FT 30.000 FT 25.000 FT 2.000 0.010 0 -
135. 0 0 0 0 0.761 1.000 1.000 0.850 0 -
136. 0 0 0 0.866 0.800 -0.550
137. !> END GENERATED DATA BLOCK
138. LOAD 1 LOADTYPE SEISMIC TITLE EX
139. UBC LOAD X 1
140. LOAD 2 LOADTYPE SEISMIC TITLE EZ
141. UBC LOAD Z 1
142. LOAD 3 LOADTYPE DEAD TITLE DL
143. SELFWEIGHT Y -1 LIST 1 TO 16 100 TO 131 200 TO 215 300 TO 329 400 TO 421 434 -
144. 435 TO 447 452 TO 464 466 TO 493 495 498 TO 503
145. MEMBER LOAD
146. 108 TO 123 206 207 210 211 407 408 413 414 UNI GY -1.16
147. 100 TO 107 124 TO 131 202 203 214 215 UNI GY -0.8
148. 436 TO 443 469 TO 476 500 TO 503 UNI GY -0.22
149. 434 435 446 447 464 466 TO 468 479 480 493 495 UNI GY -1.
150. LOAD 4 LOADTYPE LIVE TITLE LL
151. MEMBER LOAD
152. 108 TO 123 407 408 413 414 UNI GY -2.9
153. 100 TO 107 124 TO 131 UNI GY -2
154. 436 TO 443 469 TO 476 500 TO 503 UNI GY -0.55
155. 200 201 204 205 208 209 212 213 UNI GY -7.6
156. 200 201 204 205 208 209 212 213 UNI GX 0.76
157. LOAD 5 LOADTYPE WIND TITLE WX
158. MEMBER LOAD
159. 1 3 5 7 9 11 13 15 UNI GX 0.6
160. WIND LOAD X 0.7 TYPE 1 YR 5 10
161. WIND LOAD -X 0.25 TYPE 1 YR 5 10
162. LOAD 6 LOADTYPE WIND TITLE WZ
163. MEMBER LOAD
164. 1 3 5 7 9 11 13 15 UNI GZ 0.5
165. WIND LOAD Z 0.7 TYPE 1 YR 5 10
166. WIND LOAD -Z 0.25 TYPE 1 YR 5 10
167. LOAD COMB 11 SEVICE LOAD (1.0DL+1.0LL)
168. 3 1.0 4 1.0
169. LOAD COMB 12 SERVICE LOAD (1.0DL+1.0LL+1.0EX)
170. 3 1.0 4 1.0 1 1.0
171. LOAD COMB 13 SERVICE LOAD (1.0DL+1.0LL+1.0EZ)
172. 3 1.0 4 1.0 2 1.0
173. LOAD COMB 14 SERVICE LOAD (1.0DL+0.8LL+0.8WX)
174. 3 1.0 4 0.8 5 0.8
175. LOAD COMB 15 SERVICE LOAD (1.0DL+0.8LL+0.8WZ)
176. 3 1.0 4 0.8 6 0.8
177. LOAD COMB 21 ULTIMATE LOAD (1.4DL+1.6LL)
178. 3 1.4 4 1.6
179. LOAD COMB 22 ULTIMATE LOAD (1.2DL+1.0LL+1.0EX)
180. 3 1.2 4 1.0 1 1.0
181. LOAD COMB 23 ULTIMATE LOAD (1.2DL+1.0LL+1.0EZ)
182. 3 1.2 4 1.0 2 1.0
183. LOAD COMB 24 ULTIMATE LOAD (1.2DL+1.2LL+1.2WX)
184. 3 1.2 4 1.2 5 1.2
185. LOAD COMB 25 ULTIMATE LOAD (1.2DL+1.2LL+1.2WZ)
186. 3 1.2 4 1.2 6 1.2
187. PERFORM ANALYSIS
P R O B L E M S T A T I S T I C S
-----------------------------------
***********************************************************
* *
* X DIRECTION : Ta = 0.445 Tb = 1.283 Tuser = 0.000 *
* T = 0.445, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.0375 x 1188.32 = 44.56 KN *
* *
***********************************************************
***********************************************************
* *
* Z DIRECTION : Ta = 0.445 Tb = 0.886 Tuser = 0.000 *
* T = 0.445, LOAD FACTOR = 1.000 *
* UBC TYPE = 97 *
* UBC FACTOR V = 0.0375 x 1188.32 = 44.56 KN *
* *
***********************************************************
201. FINISH
************************************************************
* For questions on STAAD.Pro, please contact *
* Bentley Systems Offices at the following locations *
* *
* Telephone Web / Email *
* *
* USA: +1 (714)974-2500 *
* UK +44(1454)207-000 *
* SINGAPORE +65 6225-6158 *
* EUROPE +31 23 5560560 *
* INDIA +91(033)4006-2021 *
* JAPAN +81(03)5952-6500 http://www.ctc-g.co.jp *
* CHINA +86 10 5929 7000 *
* THAILAND +66(0)2645-1018/19 partha.p@reisoftwareth.com *
* *
* Worldwide http://selectservices.bentley.com/en-US/ *
* *
************************************************************
By Date22-Nov-10 Chd
3D Rendered View
Print Time/Date: 09/12/2010 16:21 STAAD.Pro for Windows Release 2006 Print Run 1 of 1
Job No Sheet No Rev
1
Part
Software licensed to Audex Pte Ltd
Job Title Ref
By Date22-Nov-10 Chd
9395
3139
89 97
2937 21 47
67
90 72 106
2735 17 45 22 68 99
55 101
65
71 60 100
2533 13 43 18 56 110
66 107
7779 53
63
70 59
9 41 14 54
64
73 81 51 111
61
69 58
98
10 62 52 7 48
74 104 49
83 57
85 50 91
5 46 96
84 23 94
40
108 32
105 92
3 44 19 24
38
30
1 109 42 15 20
Y 82 36
28
X 11 16 8
Z 75
80
78
34
26
12 6
76
Load 1
2
Print Time/Date: 09/12/2010 16:17 STAAD.Pro for Windows Release 2006 Print Run 1 of 1
Job No Sheet No Rev
1
Part
Software licensed to Audex Pte Ltd
Job Title Ref
By Date22-Nov-10 Chd
469
124 485
479 470
316 214 125
481 487
116
477 467 501
210 117 308 322 212 14
314 126 419
482
416 418 420 471
108
489 472
206 109 304 320 208 10 309 413 491
127 421
493 473
312 118 417
328 128 490 474
100 410 412 414
436 456
202 101 300 318 204 6 305 407 119 415 13 329
110 411
446 437 326 120 492 495 503
404 406 408 129
452 458
200 2 301 401 405 111 409 9 327
102
444 434 500 324 112
400 402 121 488
453 499
468 475
438 460 103 403 5 325
323 16 130
439 104
113 483
462 464 440 461 486 476
1 441 131 478 480
321 12 122 310 213 215
317
105 484
463 466 123
502 319 8 114 306
315
209 211 311 15
459
Y 4 106 302
115
205 207 307 11
X 498
435 442
313
Z 454
457 107
443 201 203 303 7
445 447
455
3
Load 1
Print Time/Date: 09/12/2010 16:16 STAAD.Pro for Windows Release 2006 Print Run 1 of 1
Job No Sheet No Rev
1
Part
Software licensed to Audex Pte Ltd
Job Title Ref
By Date22-Nov-10 Chd
Beam L/C Node Axial Force Shear-Y Shear-Z Torsion Moment-Y Moment-Z
(kN) (kN) (kN) (kNm) (kNm) (kNm)
119 21 53 10.850 8.438 -0.000 0.007 -0.069 75.441
120 21 54 10.850 8.438 -0.000 -0.007 0.069 75.441
119 25 53 5.660 3.128 0.063 0.005 0.015 62.646
119 24 53 8.400 6.641 0.000 -0.198 1.983 59.867
120 24 54 8.400 6.641 0.000 0.198 -1.983 59.867
119 23 53 7.439 4.296 -0.040 0.005 -0.075 56.569
120 25 54 5.018 9.541 0.063 -0.005 0.112 56.201
119 22 53 7.174 5.932 -0.106 -0.271 2.606 54.684
120 22 54 7.174 5.932 0.106 0.271 -2.606 54.684
120 23 54 6.899 7.567 -0.040 -0.002 -0.005 53.282
119 13 53 7.201 3.892 -0.040 0.005 -0.080 51.784
119 11 53 6.930 5.527 -0.000 0.004 -0.040 50.141
120 11 54 6.930 5.527 -0.000 -0.004 0.040 50.141
119 12 53 6.935 5.527 -0.106 -0.271 2.601 49.899
120 12 54 6.935 5.527 0.106 0.271 -2.601 49.899
120 13 54 6.660 7.162 -0.040 -0.003 -0.000 48.497
119 15 53 4.011 2.490 0.042 0.003 0.015 46.549
119 14 53 5.838 4.832 0.000 -0.133 1.327 44.696
120 14 54 5.838 4.832 0.000 0.133 -1.327 44.696
120 15 54 3.584 6.766 0.042 -0.003 0.070 42.252
119 4 53 5.739 3.503 -0.000 0.007 -0.066 26.217
120 4 54 5.739 3.503 -0.000 -0.007 0.066 26.217
119 3 53 1.192 2.024 -0.000 -0.003 0.026 23.924
120 3 54 1.192 2.024 -0.000 0.003 -0.026 23.924
119 6 53 -2.214 -2.920 0.053 -0.000 0.052 2.064
119 2 53 0.270 -1.635 -0.040 0.001 -0.040 1.643
119 6 59 2.214 2.920 -0.053 0.000 0.001 0.871
120 6 59 2.748 -2.424 -0.053 0.000 -0.000 0.871
119 5 59 -0.069 -0.007 -0.000 0.169 -1.692 0.245
120 5 59 -0.069 -0.007 -0.000 -0.169 1.692 0.245
120 1 59 -0.005 -0.000 -0.106 -0.275 2.748 0.242
119 1 59 -0.005 -0.000 0.106 0.275 -2.748 0.242
120 2 59 0.270 -1.635 0.040 -0.001 -0.000 -0.000
119 2 59 -0.270 1.635 0.040 -0.001 -0.000 -0.000
120 1 54 0.005 0.000 0.106 0.275 -2.641 -0.242
119 1 53 0.005 0.000 -0.106 -0.275 2.641 -0.242
120 5 54 0.069 0.007 0.000 0.169 -1.692 -0.252
119 5 53 0.069 0.007 0.000 -0.169 1.692 -0.252
120 2 54 -0.270 1.635 -0.040 0.001 -0.040 -1.643
120 6 54 -2.748 2.424 0.053 -0.000 0.053 -3.307
120 3 59 -1.380 -0.138 0.000 -0.003 0.026 -25.010
119 3 59 -1.380 -0.138 0.000 0.003 -0.026 -25.010
119 4 59 -6.029 -0.603 0.000 -0.007 0.066 -28.281
120 4 59 -6.029 -0.603 0.000 0.007 -0.066 -28.281
120 15 59 -4.005 -2.560 -0.042 0.003 -0.027 -46.938
119 15 59 -4.432 1.716 -0.042 -0.003 0.027 -46.938
120 14 59 -6.259 -0.626 -0.000 -0.133 1.327 -47.439
119 14 59 -6.259 -0.626 -0.000 0.133 -1.327 -47.439
119 12 59 -7.414 -0.741 0.106 0.271 -2.708 -53.049
Print Time/Date: 30/11/2010 10:01 STAAD.Pro V8i (SELECTseries 1) 20.07.06.35 Print Run 1 of 2
Job No Sheet No Rev
2
Part
Software licensed to Audex Pte Ltd
Job Title Ref
By Date22-Nov-10 Chd
Cont...
Beam L/C Node Axial Force Shear-Y Shear-Z Torsion Moment-Y Moment-Z
(kN) (kN) (kN) (kNm) (kNm) (kNm)
120 12 59 -7.414 -0.741 -0.106 -0.271 2.708 -53.049
119 11 59 -7.409 -0.741 0.000 -0.004 0.040 -53.290
120 11 59 -7.409 -0.741 0.000 0.004 -0.040 -53.290
120 13 59 -7.139 -2.376 0.040 0.003 -0.040 -53.290
119 13 59 -7.679 0.894 0.040 -0.005 0.040 -53.290
120 22 59 -7.690 -0.769 -0.106 -0.271 2.713 -58.051
119 22 59 -7.690 -0.769 0.106 0.271 -2.713 -58.051
120 23 59 -7.415 -2.404 0.040 0.002 -0.035 -58.292
119 23 59 -7.955 0.867 0.040 -0.005 0.035 -58.292
120 25 59 -5.593 -3.798 -0.063 0.005 -0.049 -62.904
119 25 59 -6.234 2.615 -0.063 -0.005 0.049 -62.904
119 24 59 -8.974 -0.897 -0.000 0.198 -1.983 -63.655
120 24 59 -8.974 -0.897 -0.000 -0.198 1.983 -63.655
120 21 59 -11.579 -1.158 0.000 0.007 -0.069 -80.263
119 21 59 -11.579 -1.158 0.000 -0.007 0.069 -80.263
Print Time/Date: 30/11/2010 10:01 STAAD.Pro V8i (SELECTseries 1) 20.07.06.35 Print Run 2 of 2
[Note : Connection analyses are based on Eurocode 3 : EN 1993-1-8:2005]
Summary
Left-hand connection
Moment
Maximum positive moment (MRd+) = 167.1 kNm ≥ Sollicitating moment (MSd) = 75.4 kNm
Most critical combination : - Combination1 -
Max positive moment allowed by welds = 300.5 kNm ≥ Sollicitating moment (MSd) = 75.4 kNm
Most critical combination : - Combination1 -
Normal force
Maximum tension in the beam (TRd) = 1121.2 kN ≥ Sollicitating tensile force (TSd) = 0 kN
Maximum compression in beam (CRd) = 1824.9 kN ≥ Sollicitating compression force (CSd) = 11.6 kN
Most critical combination : - Combination1 -
Moment combined with normal force
Combination name MSd MRd NSd NRd MSd/MRd + NSd/NRd <1
Combination1 75.44 167.11 11.63 1824.93 0.46 V
Shear
Maximum shear force (VRd) = 450.9 kN ≥ Sollicitating shear force (VSd) = 7.3 kN
Most critical combination : - Combination1 -
Stiffness
For a positive moment
Sjini = 296524 kNm/Rad
Sj = 98841 kNm/Rad
The connection is Rigid.
Most critical combination : - Combination1 -
Right-hand connection
Moment
Maximum positive moment (MRd+) = 167.1 kNm ≥ Sollicitating moment (MSd) = 75.4 kNm
Most critical combination : - Combination1 -
Max positive moment allowed by welds = 225.3 kNm ≥ Sollicitating moment (MSd) = 75.4 kNm
Most critical combination : - Combination1 -
Normal force
Maximum tension in the beam (TRd) = 1093.7 kN ≥ Sollicitating tensile force (TSd) = 0 kN
Maximum compression in beam (CRd) = 1824.9 kN ≥ Sollicitating compression force (CSd) = 11.6 kN
Most critical combination : - Combination1 -
Moment combined with normal force
Combination name MSd MRd NSd NRd MSd/MRd + NSd/NRd <1
Combination1 75.44 167.11 11.63 1824.93 0.46 V
Shear
Maximum shear force (VRd) = 450.9 kN ≥ Sollicitating shear force (VSd) = 7.3 kN
Most critical combination : - Combination1 -
Stiffness
For a positive moment
Sjini = 286632 kNm/Rad
Sj = 95544 kNm/Rad
The connection is Rigid.
Most critical combination : - Combination1 -
Bolt row n°1, Restrictive component: End plate in bending (mode 3), Moment : 99 kNm
Bolt row n°2, Restrictive component: Adjustment, Moment : 49.6 kNm
Bolt row n°3, Restrictive component: Adjustment, Moment : 17.1 kNm
Bolt row n°4, Restrictive component: Adjustment, Moment : 1.5 kNm
Moment allowed by welds = 300.5 kNm ≥ Sollicitating moment (MSd) = 75.4 kNm
Components
Bolt row
level arm and tensile force in bolt-row
n° bolt-row 1 2 3 4
level arm (mm) 351 248 146 43
BtRd(kN) 141.1 141.1 141.1 141.1
Normal force
Compression = (CSd = 11.6 kN) ( NInit = 10.9 kN) ≤ 1824.9 kN (CRd)
Restrictive element for max compression : Compression in beam
Tension = (TSd = 0 kN) <= 1121.2 kN (TRd)
Restrictive element for max tension : Tension in end plate
Components
Moment in end plate
Max tension due to moment in end plate = 1121.2 kN
Tension in beam
Tension resistance in beam = 2574.4 kN
Compression in beam
Compression resistance in beam = 1824.9 kN
Tension in bolts
Tension resistance of bolts = 1129 kN
Tension in the welds
Limit tension in the welds = 3165.3 kN
Normal force combined with moment
Sollicitating moment (MSd) = 75.4 kNm
Moment resistance (MRd) = 167.1 kNm
Sollicitating normal force (NSd) = 11.6 kN
Normal force resistance (NRd) = 1824.9 kN
Components
Welds in shear
Limit for Welds in shear = 1354.1 kN
Bolt rows in shear
Resistance of bolt rows in shear = 450.9 kN
Stiffness
Sjini = 296524 kNm/Rad
Sj = 98841 kNm/Rad
Classification
Connection is Rigid. (See rigidity graph)
Upper limit pinned connection = 4097 kNm/Rad
Lower limit rigid connection = 204827 kNm/Rad
Components
Bolts in tension
k = 7.8 mm/Rad
End plate in bending
Bolt rows in tension :
k for the boltrow n° 1 = 62.2 mm/Rad
k for the boltrow n° 2 = 39.9 mm/Rad
k for the boltrow n° 3 = 39.9 mm/Rad
k for the boltrow n° 4 = 63.5 mm/Rad
Right-hand connection
Moment
Total moment resistance (MRd) = 167.1 kNm ≥ Sollicitating moment (MSd) = 75.4 kNm
Bolt row n°1, Restrictive component: End plate in bending (mode 3), Moment : 99 kNm
Bolt row n°2, Restrictive component: Adjustment, Moment : 49.6 kNm
Bolt row n°3, Restrictive component: Adjustment, Moment : 17.1 kNm
Bolt row n°4, Restrictive component: Adjustment, Moment : 1.5 kNm
Moment allowed by welds = 225.3 kNm ≥ Sollicitating moment (MSd) = 75.4 kNm
Components
Bolt row
level arm and tensile force in bolt-row
n° bolt-row 1 2 3 4
level arm (mm) 351 248 146 43
BtRd(kN) 141.1 141.1 141.1 141.1
Normal force
Compression = (CSd = 11.6 kN) ( NInit = 10.9 kN) ≤ 1824.9 kN (CRd)
Restrictive element for max compression : Compression in beam
Tension = (TSd = 0 kN) <= 1093.7 kN (TRd)
Restrictive element for max tension : Tension in end plate
Components
Moment in end plate
Max tension due to moment in end plate = 1093.7 kN
Tension in beam
Tension resistance in beam = 2574.4 kN
Compression in beam
Compression resistance in beam = 1824.9 kN
Tension in bolts
Tension resistance of bolts = 1129 kN
Tension in the welds
Limit tension in the welds = 2373.9 kN
Normal force combined with moment
Sollicitating moment (MSd) = 75.4 kNm
Moment resistance (MRd) = 167.1 kNm
Sollicitating normal force (NSd) = 11.6 kN
Normal force resistance (NRd) = 1824.9 kN
Components
Welds in shear
Limit for Welds in shear = 1015.6 kN
Bolt rows in shear
Resistance of bolt rows in shear = 450.9 kN
Stiffness
Sjini = 286632 kNm/Rad
Sj = 95544 kNm/Rad
Classification
Connection is Rigid. (See rigidity graph)
Upper limit pinned connection = 4097 kNm/Rad
Lower limit rigid connection = 204827 kNm/Rad
Components
Bolts in tension
k = 7.8 mm/Rad
End plate in bending
Bolt rows in tension :
k for the boltrow n° 1 = 50.1 mm/Rad
k for the boltrow n° 2 = 31.1 mm/Rad
k for the boltrow n° 3 = 31.1 mm/Rad
k for the boltrow n° 4 = 53.7 mm/Rad
Data
Material Data
Steel S275
Density = 7850 kg/m³
Young Modulus E = 210000 N/mm²
Poisson Ratio ν = 0.3
Transversal Young Modulus G = 80769 N/mm²
Thermic dilatation coefficient = 0.000012 /°C
strength :
Security coefficient :
By Date22-Nov-10 Chd
Beam L/C Node Axial Force Shear-Y Shear-Z Torsion Moment-Y Moment-Z
(kN) (kN) (kN) (kNm) (kNm) (kNm)
118 6 45 2.113 -3.353 0.033 -0.000 0.127 20.981
118 2 45 1.430 -1.742 -0.030 -0.000 -0.115 11.893
118 5 53 -0.102 0.084 0.757 -0.002 -2.196 0.288
118 1 53 -0.033 0.084 1.269 -0.003 -3.447 0.277
118 1 45 0.033 -0.084 -1.269 0.003 -4.207 0.230
118 5 45 0.102 -0.084 -0.757 0.002 -2.370 0.220
118 6 53 -2.113 3.353 -0.033 0.000 0.072 -0.765
118 2 53 -1.430 1.742 0.030 0.000 -0.069 -1.388
118 3 53 2.043 -5.210 0.005 -0.003 -0.027 -27.606
118 4 53 -1.977 -5.692 0.032 -0.004 0.089 -30.454
118 3 45 -3.175 16.526 -0.005 0.003 -0.005 -37.928
118 14 53 0.380 -9.697 0.637 -0.007 -1.713 -51.738
118 15 53 -1.229 -7.082 0.005 -0.006 0.102 -52.581
118 4 45 0.237 23.092 -0.032 0.004 -0.282 -56.330
118 12 53 0.033 -10.818 1.307 -0.009 -3.385 -57.782
118 11 53 0.066 -10.902 0.037 -0.006 0.062 -58.059
118 13 53 -1.364 -9.160 0.068 -0.006 -0.007 -59.447
118 22 53 0.441 -11.860 1.308 -0.010 -3.390 -63.303
118 23 53 -0.955 -10.202 0.069 -0.007 -0.012 -64.968
118 15 45 -1.295 32.317 -0.005 0.006 -0.129 -66.207
118 24 53 -0.044 -12.982 0.953 -0.009 -2.561 -69.326
118 25 53 -2.456 -9.060 0.005 -0.007 0.161 -70.589
118 13 45 -1.508 37.876 -0.068 0.006 -0.402 -82.364
118 14 45 -2.903 34.932 -0.637 0.007 -2.126 -82.815
118 21 53 -0.303 -16.402 0.059 -0.009 0.105 -87.374
118 25 45 -0.990 43.518 -0.005 0.007 -0.192 -87.932
118 23 45 -2.143 41.181 -0.069 0.007 -0.403 -89.949
118 12 45 -2.904 39.534 -1.307 0.009 -4.494 -94.027
118 11 45 -2.938 39.618 -0.037 0.006 -0.287 -94.257
118 22 45 -3.539 42.839 -1.308 0.010 -4.494 -101.613
118 24 45 -3.402 47.441 -0.953 0.009 -3.188 -112.845
118 21 45 -4.065 60.083 -0.059 0.009 -0.458 -143.226
Print Time/Date: 30/11/2010 17:30 STAAD.Pro V8i (SELECTseries 1) 20.07.06.35 Print Run 1 of 1
Job No Sheet No Rev
1
Part
Software licensed to Audex Pte Ltd
Job Title Ref
By Date22-Nov-10 Chd
Beam L/C Node Axial Force Shear-Y Shear-Z Torsion Moment-Y Moment-Z
(kN) (kN) (kN) (kNm) (kNm) (kNm)
117 21 45 -16.503 48.174 -0.642 0.002 1.629 111.921
117 24 45 -12.943 37.848 -0.829 0.002 2.505 87.871
117 22 45 -11.465 33.838 -1.358 0.003 3.997 78.551
117 25 45 -13.160 35.372 -0.602 0.000 1.498 77.045
117 11 45 -10.762 31.560 -0.400 0.001 1.016 73.315
117 23 45 -12.172 32.579 -0.322 0.001 0.844 73.289
117 12 45 -10.749 31.516 -1.360 0.003 4.001 73.168
117 13 45 -11.455 30.257 -0.324 0.001 0.848 67.907
117 14 45 -9.345 27.554 -0.551 0.001 1.667 63.963
117 15 45 -9.490 25.903 -0.400 -0.000 0.995 56.746
117 4 45 -7.181 19.951 -0.409 0.002 1.032 46.403
117 3 45 -3.582 11.609 0.008 -0.001 -0.016 26.912
117 21 37 13.955 -22.693 0.642 -0.002 0.630 12.715
117 25 37 11.150 -15.271 0.602 -0.000 0.620 12.024
117 24 37 10.933 -17.747 0.829 -0.002 0.410 9.905
117 23 37 10.365 -14.508 0.322 -0.001 0.288 9.524
117 13 37 9.780 -13.506 0.324 -0.001 0.291 9.062
117 22 37 9.658 -15.767 1.358 -0.003 0.781 8.691
117 15 37 8.018 -11.183 0.400 0.000 0.411 8.478
117 11 37 9.087 -14.809 0.400 -0.001 0.392 8.236
117 12 37 9.074 -14.765 1.360 -0.003 0.783 8.228
117 14 37 7.873 -12.833 0.551 -0.001 0.271 7.066
117 4 37 6.166 -9.801 0.409 -0.002 0.405 5.924
117 3 37 2.921 -5.008 -0.008 0.001 -0.012 2.312
117 6 37 0.205 2.083 0.101 0.001 0.124 1.784
117 2 37 0.693 1.303 -0.077 -0.000 -0.102 0.826
117 5 37 0.024 0.020 0.290 -0.001 -0.051 0.018
117 1 37 -0.013 0.044 0.960 -0.002 0.391 -0.007
117 5 45 -0.024 -0.020 -0.290 0.001 1.072 -0.089
117 1 45 0.013 -0.044 -0.960 0.002 2.984 -0.147
117 2 45 -0.693 -1.303 0.077 0.000 -0.168 -5.408
117 6 45 -0.205 -2.083 -0.101 -0.001 0.232 -9.111
Print Time/Date: 30/11/2010 17:39 STAAD.Pro V8i (SELECTseries 1) 20.07.06.35 Print Run 1 of 1
[Note : Connection analyses are based on Eurocode 3 : EN 1993-1-8:2005]
Summary
Right-hand connection
Moment
Maximum positive moment (MRd+) = 148.6 kNm ≥ Sollicitating moment (MSd) = 143 kNm
Most critical combination : - B1 -
Max positive moment allowed by welds = 261 kNm ≥ Sollicitating moment (MSd) = 143 kNm
Most critical combination : - B1 -
Normal force
Maximum tension in the beam (TRd) = 1235.5 kN ≥ Sollicitating tensile force (TSd) = 0 kN
Maximum compression in beam (CRd) = 2274.5 kN ≥ Sollicitating compression force (CSd) = 110.7 kN
Most critical combination : - C1 -
Moment combined with normal force
Combination name MSd MRd NSd NRd MSd/MRd + NSd/NRd <1
C1 31.30 148.61 110.70 2274.50 0.26 V
B1 143.00 148.61 60.00 2274.50 0.99 V
Shear
Maximum shear force (VRd) = 748.8 kN ≥ Sollicitating shear force (VSd) = 9.6 kN
Most critical combination : - C1 -
Maximum shear allowed in the column web = 644.1 kN ≥ Sollicitating shear in the column web = 532.8 kN
Most critical combination : - B1 -
Stiffness
For a positive moment
Sjini = 46760 kNm/Rad
Sj = 23380 kNm/Rad
The connection is Semi-Rigid.
Most critical combination : - C1 -
Bolt row n°1, Restrictive component: End plate in bending (mode 2), Moment : 88.5 kNm
Bolt row n°2, Restrictive component: Column flange in bending (mode 2), Moment : 58.7 kNm
Bolt row n°3, Restrictive component: Column web in shear, Moment : 1.4 kNm
Bolt row n°4, Restrictive component: Column web in shear, Moment : 0 kNm
Moment allowed by welds = 261 kNm ≥ Sollicitating moment (MSd) = 31.3 kNm
Components
Bolt row
level arm and tensile force in bolt-row
n° bolt-row 1 2 3 4
level arm (mm) 297 183 57 0
BtRd(kN) 203.3 203.3 203.3 203.3
Normal force
Compression = (CSd = 110.7 kN) ≤ 2274.5 kN (CRd)
Restrictive element for max compression : Compression in beam
Tension = (TSd = 0 kN) <= 1235.5 kN (TRd)
Restrictive element for max tension : Tension in the column flange
Components
Moment in the column flange
Limit tension due to the moment in the column flange = 1235.5 kN
Moment in end plate
Max tension due to moment in end plate = 1411.2 kN
Tension in beam
Tension resistance in beam = 2522.2 kN
Compression in beam
Compression resistance in beam = 2274.5 kN
Tension in bolts
Tension resistance of bolts = 1626.6 kN
Tension in the welds
Limit tension in the welds = 3092.9 kN
Normal force combined with moment
Sollicitating moment (MSd) = 31.3 kNm
Moment resistance (MRd) = 148.6 kNm
Sollicitating normal force (NSd) = 110.7 kN
Normal force resistance (NRd) = 2274.5 kN
Bolt row n°1, Restrictive component: End plate in bending (mode 2), Moment : 88.5 kNm
Bolt row n°2, Restrictive component: Column flange in bending (mode 2), Moment : 58.7 kNm
Bolt row n°3, Restrictive component: Column web in shear, Moment : 1.4 kNm
Bolt row n°4, Restrictive component: Column web in shear, Moment : 0 kNm
Moment allowed by welds = 261 kNm ≥ Sollicitating moment (MSd) = 143 kNm
Components
Bolt row
level arm and tensile force in bolt-row
n° bolt-row 1 2 3 4
level arm (mm) 297 183 57 0
BtRd(kN) 203.3 203.3 203.3 203.3
Normal force
Compression = (CSd = 60 kN) ≤ 2274.5 kN (CRd)
Restrictive element for max compression : Compression in beam
Tension = (TSd = 0 kN) <= 1235.5 kN (TRd)
Restrictive element for max tension : Tension in the column flange
Components
Moment in the column flange
Limit tension due to the moment in the column flange = 1235.5 kN
Moment in end plate
Max tension due to moment in end plate = 1411.2 kN
Tension in beam
Tension resistance in beam = 2522.2 kN
Compression in beam
Compression resistance in beam = 2274.5 kN
Tension in bolts
Tension resistance of bolts = 1626.6 kN
Tension in the welds
Limit tension in the welds = 3092.9 kN
Normal force combined with moment
Sollicitating moment (MSd) = 143 kNm
Moment resistance (MRd) = 148.6 kNm
Sollicitating normal force (NSd) = 60 kN
Normal force resistance (NRd) = 2274.5 kN
strength :
Security coefficient :
Draw
Job No Sheet No Rev
1
Part
Software licensed to Audex Pte Ltd
Job Title Ref
By Date22-Nov-10 Chd
Reaction Summary
Horizontal Vertical Horizontal Moment
Node L/C FX FY FZ MX MY MZ
(kN) (kN) (kN) (kNm) (kNm) (kNm)
Max FX 8 3:DL 0.697 48.842 0.119 -0.520 -0.001 -1.223
Min FX 2 24:ULTIMATE LOAD
-11.904 119.901 3.408 4.982 -0.013 27.754
Max FY 8 21:ULTIMATE LOAD-2.581 159.824 5.627 9.029 -0.008 8.607
Min FY 2 1:EX -5.453 -4.901 -0.254 -0.509 -0.002 15.234
Max FZ 2 21:ULTIMATE LOAD-5.848 155.186 5.967 9.854 -0.007 14.331
Min FZ 1 25:ULTIMATE LOAD-4.368 119.815 -14.242 -35.310 0.003 10.718
Max MX 2 21:ULTIMATE LOAD-5.848 155.186 5.967 9.854 -0.007 14.331
Min MX 1 25:ULTIMATE LOAD-4.368 119.815 -14.242 -35.310 0.003 10.718
Max MY 1 24:ULTIMATE LOAD
-11.904 119.901 -3.408 -4.982 0.013 27.754
Min MY 2 24:ULTIMATE LOAD
-11.904 119.901 3.408 4.982 -0.013 27.754
Max MZ 2 24:ULTIMATE LOAD
-11.904 119.901 3.408 4.982 -0.013 27.754
Min MZ 8 3:DL 0.697 48.842 0.119 -0.520 -0.001 -1.223
Print Time/Date: 30/11/2010 11:25 STAAD.Pro V8i (SELECTseries 1) 20.07.06.35 Print Run 1 of 1
[Note : Connection analyses are based on Eurocode 3 : EN 1993-1-8:2005]
Summary
Moment and normal force
Combination list
1) Max N : V 2) Max Mx : V
Moment in welds
Max positive moment allowed by welds = 195.7 kNm ≥ Sollicitating moment (MSd) = 35.1 kNm
Most critical combination : - Max Mx -
Shear
Maximum shear force (VRd) = 123.3 kN ≥ Sollicitating shear force (VSd) = 14.2 kN
Most critical combination : - Max Mx -
Stiffness
For a positive moment
Sjini = 46969 kNm/Rad
Sj = 15656 kNm/Rad
The connection is Semi-Rigid.
Most critical combination : - Max Mx -
Moment allowed by welds = 195.7 kNm >= Sollicitating moment (MSd) = 9 kNm
Components
Tension column flange on left side
Limit force for tension column flange = 295.8 kN
Left-hand side of base plate in bending
Limit force for base plate in bending = 176.4 kN
Tension column flange on right side
Limit force for tension column flange = 295.8 kN
Right-hand side of base plate in bending
Limit force for base plate in bending = 176.4 kN
Left-hand column flange in compression
Compression resistance of column flange = 1137.2 kN
Concrete in compression at left-hand side
Compression resistance of concrete base = 886.2 kN
Right-hand column flange in compression
Compression resistance of column flange = 1137.2 kN
Concrete in compression under right side
Compression resistance of concrete base = 886.2 kN
Anchors in tension on left-hand side
Resistance of anchors in tension = 119.2 kN
Anchors in tension on right-hand side
Resistance of anchors in tension = 119.2 kN
Shear
Shear resistance (VRd) for the connection = 145.7 kN
The shear sollicitation (VSd) = 5.6 kN <= Shear resistance (VRd) = 145.7 kN
Shear resistance limited by anchors (shear force and bearing)
and by friction between base plate and concrete base
Components
Anchors subjected to shear
Limit for anchors in shear = 113.7 kN
Friction between base plate and concrete block
Limit for Friction between base plate and concrete = 32 kN
Welds subjected to shear
Limit for welds in shear = 687.8 kN
Stiffness
Sjini = 112002 kNm/Rad
Sj = 37334 kNm/Rad
Classification
Connection is Semi-Rigid. (See rigidity graph)
Upper limit pinned connection =2396 kNm/Rad
Lower limit rigid connection =143734 kNm/Rad
Components
Concrete and grout in compression at left-hand side
k13 = 18.5 mm/Rad
Concrete and grout in compression at right-hand side
k13 = 18.5 mm/Rad
Moment allowed by welds = 195.7 kNm >= Sollicitating moment (MSd) = 35.1 kNm
Components
Tension column flange on left side
Limit force for tension column flange = 295.8 kN
Left-hand side of base plate in bending
Limit force for base plate in bending = 176.4 kN
Tension column flange on right side
Limit force for tension column flange = 295.8 kN
Right-hand side of base plate in bending
Limit force for base plate in bending = 176.4 kN
Left-hand column flange in compression
Compression resistance of column flange = 1137.2 kN
Concrete in compression at left-hand side
Compression resistance of concrete base = 886.2 kN
Right-hand column flange in compression
Compression resistance of column flange = 1137.2 kN
Concrete in compression under right side
Compression resistance of concrete base = 886.2 kN
Anchors in tension on left-hand side
Resistance of anchors in tension = 119.2 kN
Anchors in tension on right-hand side
Resistance of anchors in tension = 119.2 kN
Shear
Shear resistance (VRd) for the connection = 123.3 kN
The shear sollicitation (VSd) = 14.2 kN <= Shear resistance (VRd) = 123.3 kN
Shear resistance limited by anchors (shear force and bearing)
and by friction between base plate and concrete base
Components
Anchors subjected to shear
Limit for anchors in shear = 99.3 kN
Friction between base plate and concrete block
Limit for Friction between base plate and concrete = 24 kN
Welds subjected to shear
Limit for welds in shear = 687.8 kN
Stiffness
Sjini = 46969 kNm/Rad
Sj = 15656 kNm/Rad
Classification
Connection is Semi-Rigid. (See rigidity graph)
Upper limit pinned connection =2396 kNm/Rad
Lower limit rigid connection =143734 kNm/Rad
Components
Base plate in bending at left-hand side
k15 = 31.9 mm/Rad
Left-hand anchors in tension
k16 = 2.3 mm/Rad
Concrete and grout in compression at right-hand side
k13 = 18.5 mm/Rad
Data
Material Data
Steel S275
Density = 7850 kg/m³
Young Modulus E = 210000 N/mm²
Poisson Ratio ν = 0.3
Transversal Young Modulus G = 80769 N/mm²
Thermic dilatation coefficient = 0.000012 /°C
strength :
Security coefficient :
Concrete C30/37
Density = 2548.4 kg/m³
Young Modulus E = 31939 N/mm²
Poisson Ratio ν = 0.2
Transversal Young Modulus G = 13308 N/mm²
Thermic dilatation coefficient = 0.00001 /°C
Draw
Job No Sheet No Rev
1
Part
Software licensed to Audex Pte Ltd
Job Title Ref
By Date22-Nov-10 Chd
Beam L/C Node Axial Force Shear-Y Shear-Z Torsion Moment-Y Moment-Z
(kN) (kN) (kN) (kNm) (kNm) (kNm)
213 21 23 11.894 31.177 3.025 -0.002 -2.639 27.006
213 24 23 9.790 23.903 2.163 -0.003 -1.658 21.184
213 22 23 9.087 20.432 2.245 -0.003 -2.341 18.365
213 12 23 8.346 20.077 2.258 -0.003 -2.366 17.902
213 11 23 7.897 19.707 1.883 -0.002 -1.633 17.168
213 25 23 5.481 21.470 2.418 -0.002 -2.276 15.472
213 4 23 4.191 17.935 1.946 -0.001 -1.759 14.854
213 14 23 7.268 16.290 1.429 -0.002 -1.080 14.585
213 23 23 4.470 17.973 2.324 -0.002 -2.516 12.713
213 13 23 3.728 17.618 2.337 -0.002 -2.541 12.250
213 15 23 4.395 14.668 1.600 -0.002 -1.492 10.777
213 21 24 -11.894 12.877 1.231 0.002 -0.502 5.019
213 24 24 -9.790 9.298 1.029 0.003 -0.326 4.376
213 22 24 -9.087 7.449 0.415 0.003 -0.862 4.353
213 12 24 -8.346 7.590 0.402 0.003 -0.881 3.949
213 11 24 -7.897 7.960 0.777 0.002 -0.302 3.390
213 14 24 -7.268 6.057 0.699 0.002 -0.199 3.322
213 3 23 3.706 1.773 -0.063 -0.000 0.126 2.315
213 3 24 -3.706 -0.706 0.063 0.000 0.094 2.023
213 25 24 -5.481 11.731 0.774 0.002 -0.602 1.572
213 15 24 -4.395 7.680 0.528 0.002 -0.383 1.452
213 23 24 -4.470 9.908 0.336 0.002 -0.963 1.400
213 4 24 -4.191 8.665 0.714 0.001 -0.396 1.367
213 13 24 -3.728 10.049 0.323 0.002 -0.982 0.995
213 1 23 0.449 0.369 0.375 -0.001 -0.733 0.734
213 1 24 -0.449 -0.369 -0.375 0.001 -0.579 0.559
213 5 23 0.261 0.212 -0.081 -0.001 0.252 0.485
213 5 24 -0.261 -0.212 0.081 0.001 0.030 0.257
213 6 24 3.330 1.816 -0.132 0.001 -0.200 -2.080
213 2 24 4.169 2.089 -0.454 0.000 -0.680 -2.395
213 6 23 -3.330 -1.816 0.132 -0.001 -0.264 -4.275
213 2 23 -4.169 -2.089 0.454 -0.000 -0.908 -4.918
Print Time/Date: 04/12/2010 09:51 STAAD.Pro V8i (SELECTseries 1) 20.07.06.35 Print Run 1 of 1
[Note : Connection analyses are based on Eurocode 3 : EN 1993-1-8:2005]
Summary
Right-hand connection
Moment
Maximum positive moment (MRd+) = 95.1 kNm ≥ Sollicitating moment (MSd) = 27 kNm
Most critical combination : - Combination1 -
Max positive moment allowed by welds = 299 kNm ≥ Sollicitating moment (MSd) = 27 kNm
Most critical combination : - Combination1 -
Normal force
Maximum tension in the beam (TRd) = 518.4 kN ≥ Sollicitating tensile force (TSd) = 0 kN
Maximum compression in beam (CRd) = 1834 kN ≥ Sollicitating compression force (CSd) = 11.9 kN
Most critical combination : - Combination1 -
Moment combined with normal force
Combination name MSd MRd NSd NRd MSd/MRd + NSd/NRd <1
Combination1 27.00 95.07 11.90 1834.03 0.29 V
Shear
Maximum shear force (VRd) = 189.4 kN ≥ Sollicitating shear force (VSd) = 31.2 kN
Most critical combination : - Combination1 -
Maximum shear allowed in the column web = 392.5 kN ≥ Sollicitating shear in the column web = 65.4 kN
Most critical combination : - Combination1 -
Stiffness
For a positive moment
Sjini = 64929 kNm/Rad
Sj = 32465 kNm/Rad
The connection is Semi-Rigid.
Most critical combination : - Combination1 -
Bolt row n°1, Restrictive component: Column flange in bending (mode 2), Moment : 87.8 kNm
Bolt row n°2, Restrictive component: Column web in shear, Moment : 7.3 kNm
n° bolt-row 1 2
level arm (mm) 344 53
BtRd(kN) 141.1 141.1
Normal force
Compression = (CSd = 11.9 kN) ≤ 1834 kN (CRd)
Restrictive element for max compression : Compression in beam
Tension = (TSd = 0 kN) <= 518.4 kN (TRd)
Restrictive element for max tension : Tension in end plate
Components
Moment in the column flange
Limit tension due to the moment in the column flange = 537.8 kN
Moment in end plate
Max tension due to moment in end plate = 518.4 kN
Tension in beam
Tension resistance in beam = 2574.4 kN
Compression in beam
Compression resistance in beam = 1834 kN
Tension in bolts
Tension resistance of bolts = 564.5 kN
Tension in the welds
Limit tension in the welds = 3157 kN
Normal force combined with moment
Sollicitating moment (MSd) = 27 kNm
Moment resistance (MRd) = 95.1 kNm
Sollicitating normal force (NSd) = 11.9 kN
Normal force resistance (NRd) = 1834 kN
strength :
Security coefficient :
Draw
Job No Sheet No Rev
1
Part
Software licensed to Audex Pte Ltd
Job Title Ref
By Date22-Nov-10 Chd
Reaction Summary
Horizontal Vertical Horizontal Moment
Node L/C FX FY FZ MX MY MZ
(kN) (kN) (kN) (kNm) (kNm) (kNm)
Max FX 8 3:DL 0.697 48.842 0.119 -0.520 -0.001 -1.223
Min FX 2 24:ULTIMATE LOAD
-11.904 119.901 3.408 4.982 -0.013 27.754
Max FY 8 21:ULTIMATE LOAD-2.581 159.824 5.627 9.029 -0.008 8.607
Min FY 2 1:EX -5.453 -4.901 -0.254 -0.509 -0.002 15.234
Max FZ 2 21:ULTIMATE LOAD-5.848 155.186 5.967 9.854 -0.007 14.331
Min FZ 1 25:ULTIMATE LOAD-4.368 119.815 -14.242 -35.310 0.003 10.718
Max MX 2 21:ULTIMATE LOAD-5.848 155.186 5.967 9.854 -0.007 14.331
Min MX 1 25:ULTIMATE LOAD-4.368 119.815 -14.242 -35.310 0.003 10.718
Max MY 1 24:ULTIMATE LOAD
-11.904 119.901 -3.408 -4.982 0.013 27.754
Min MY 2 24:ULTIMATE LOAD
-11.904 119.901 3.408 4.982 -0.013 27.754
Max MZ 2 24:ULTIMATE LOAD
-11.904 119.901 3.408 4.982 -0.013 27.754
Min MZ 8 3:DL 0.697 48.842 0.119 -0.520 -0.001 -1.223
Print Time/Date: 30/11/2010 11:25 STAAD.Pro V8i (SELECTseries 1) 20.07.06.35 Print Run 1 of 1
Project ATB Terminal and Jetty Topside UNREGISTERED
Facilities Concrete Innovation & Design
COPY
Client ATT TANJUNG BIN SDN BHD Made by Date Page
Location Pilecap 2PC1 YU 9-Dec-10
Double Pilecap
PILECAP DESIGN to BS 8110:1997 Checked Revision Job No
Originated from CiD Pilecaps.xls on CD © 2001 Concrete Innovation & Design - - 171003
DIMENSIONS mm PILECAP
COLUMN A= 400
→ = 500 B= 1200
↑ = 500 C= 400
E= 600
Pile Ø = 350 depth H = 800