Professional Documents
Culture Documents
Vini Схемы
Vini Схемы
Vini Схемы
Be sure to read the operating instructions carefully and observe the installation sequence before beginning the installation pro
6-Monthly periodical maintenance should be done or done after product installation or use has been turned on.
7-If changes are made to the product, it should be registered in the registry.
HORİZONTAL PARTİTİON
CONSTRUCTION POLE
. PLEASE MOUNT THE LOWER MITER SACINI AND BASE SCALES GET THEM.
PLATFORM LIGHTING
. SCALES BRING IN THE UPRIGHT POSITION AFTER THE PLATFORM PROCESS.
UPS ( POWER SUPPLY ) . STEEL CONSTRUCTION MOUNTED ON THE ROOF AFTER COMPLETION.
PLATFORM WALL
. MERGE with SCREWS 12 RAY CONSOLES
BOX PROFILE SEHPASINA, BOX PROFILE PLEASE AND HORIZONTAL CARRIER MOUNTED. (Syf5)
HANDLE ( RAILING ) INSTALLATION OF THE DASHBOARD AND MAKE UPS INSTALLATIONS HORIZONTAL THROUGH THE CARRIER
. SECURE THE HORIZONTAL POSITION EQUAL TO SHEEP AND TAŞIYILARA PLATFORM BASE.
PLATFORM FLOOR MOUNTED INSTALLATION AND OPERATIONS VIA THE HOME PAGE.
Page
06
Tel : +90 352 247 44 44 Fax: +090 352 241 18 19 Web :www.vini.com.tr E-mail : info@vini.com.tr
WINC
WATCH OUT!. ... Recovery process who received training and/or can be done by authorised service centres.
. Operation: open the cover of the final and the electricity Control Board şartelden Squire.
The PROCESS to download times to floor level LEVEL level of the platform: a check.
. OPERATION DOOR OPEN ENGINE: on the product with the key way.
. TRADING FLOOR DOOR lock: Key open the way with products.
OPERATION RESCUE: the above post processing can be done safe recovery process
. OPERATION WARNING/WARNING: DO NOT USE the ' ' tag ' ' DEFECTIVE Product upon drying.
. OPERATION notice: Product failure should be given information regarding authorized service.
ALARM
PAKO SAMAD
FAULTY
!....
FLOOR LEVEL
Page
08
Tel : +90 352 247 44 44 Fax: +090 352 241 18 19 Web :www.vini.com.tr E-mail : info@vini.com.tr
WINCH STRAP TRANSP
ORT HOOKS
0 MM
PLATFORM ROOF
HYDRAULIC PISTON
ROPE
VOICE ANNOUNCEMENT
FIXING THE CONSOLE PLATFORM LED LIGHTING
BUTTON
HANDLE
PLATFORM FLOOR
PRESS CONTACTS
120 MM BOTTOM HOLE DISTANCE
DOOR LOCK
90 CİRCULAR DOOR OPENİNG
ALARM
PAKO SAMAD
CONTROL COVER
FLOOR BUTTON
PEDESTAL BUTTONS
RAMP
LOCK
Floor mounting fixing point from the console and place M12 Steel Dubel secure concrete with ground/structure.
PALANGA SKATING
PALANGA PLATE
PALANGA CASTER (SHUTTLE)
HYDRAULIC PISTON
BOX PROFILE
ROPE ATTACHMENT
PALLET
40
Platform Net Dept=1400
R KH 400 Rumuzlar
Tarih (Date) 01.01.2017
11
Tel : +90 352 247 44 44 Fax: +090 352 241 18 19 Web :www.vini.com.tr E-mail : info@vini.com.tr
142 FLOOR-COUNTER (MONO STABLE)
142 (COUNTERS WHO WALK UP TO THE UPPER STOP DOWN)
SEATS
142 SEE
100
1 AND
2 cm. M
3. FLOOR 818
5 cm.
5 cm
. SH
OUL
DB
E FR
ONT
818
1. FLOOR
NT
B E FRO
HOULD
5 cm. S
5 CM
M1
817
12
Tel : +90 352 247 44 44 Fax: +090 352 241 18 19 Web :www.vini.com.tr E-mail : info@vini.com.tr
UPS 10A
UPS GN
UPS GL
UPS ÇN
UPS ÇL
FUSER
FUSER
MP
PE
N
N
1
1
THERMAL SWITCH
R S T
CONTACTOR
6-10A A1
25A
A2
N
S
R
T
ŞARTEL
PAKO
L 200 VOLT
N NÖTÜR
UPS G = ENTER
220 VOLT Ç = EXIT
N
S
R
PE
W
U
V
CLAMP
LINK
PE
FUSER
N
S
MOTOR
T
R
UPS GN
UPS GL
UPS ÇN
UPS ÇL
MP
PE
N
N
1
1
PP2
1. FLOOR AUTOMATIC DOOR. PP
COM2
PP1
DOOR ENGINE TRANSFORMER 220 V OLT CONNECTION SCHEMA
KLMS-001
MOTOR 220 V
PP4 CONNECTION
3. FLOOR AUTOMATIC DOOR. PP
COM4
1 FLOOR DOOR
PP3 MOTOR 220 V
2. FLOOR AUTOMATIC DOOR. PP CONNECTION
COM3
2 FLOOR DOOR
MOTOR 220 V
CONNECTION
3 FLOOR DOOR
MOTOR 220 V
CONNECTION
INTERNAL TELEPHONE
C D B
BZR 1000 817 COM 142 COM M1 COM 818 COM HP+ HP- TEL+ TEL- COM K.LAMBA
301
302
303
304
100
1000
RZV001
804
AC
ALM
304 303 302 301 817 142 AC M1 804 818 1000 100
HP- HP+ TL+ TL- COM ALR BZR KL KL PE 110 120
110 111 112 113 114 120
1 3 5 7 9 11 13 15 17 19 21 23
2 4 6 8 10 12 14 16 18 20 22 24
100
1000
EXTERNAL CALL
VALF K.LAMBA
401
ALR
402 COM
403
A B C D E F G 2G
DİRENÇ
404
100
100
1000
1000
TEL+ C
TEL- D
COM B
02 12 031 032
EXTERNAL TELEPHONE
UP
140
130
DOWN
120
PIT STOP 110
111 BUSY
112
OUT OF SERVICE
PLUG THE DOOR CONTACT
1000
121
131
132
140 DEP DTS 141 M0 FR1 869 501 500
DOOR LOCK IGNITION
100
KLMS-001
304 303 302 301 817 142 AC M1 804 818 1000 100
100 PTC VALF COM 100 804
HP- HP+ TL+ TL- COM ALR BZR KL KL PE 110 120
1 3 5 7 9 11 13 15 17 19 21 23
2 4 10 12 14 20 22 24 1 2
6 8 16 18
OVERLOAD CONTACT
24 NAKİL FLEKSİBİL
BOBİNİ
VALF
CONTROL PANEL
-------------------------
TRAFO
0V(N)
PE
ANNOUNCEMENT
+ 24 V
-0V
N L
UPS GN
UPS GL
UPS ÇN
UPS ÇL
ısıtıcı
ısıtıcı
2000
840
PRİZ
MP
PE
N
N
1
1
THERMAL SWITCH
LEAKAGE CURRENT
R S T
CONTACTOR
A1
24 VOL 6 A
TRAFO 6 A
UPS 10 A
A2
L1
INVERTER
10A
10B
MP
ANAKART
KLMS-001
+ 24 V
-0V
N L
UPS GN
UPS GL
UPS ÇN
UPS ÇL
PRİZ
ısıtıcı
ısıtıcı
2000
840
MP
PE
N
N
1
1
THERMAL SWITCH
LEAKAGE CURRENT
R S T
A1
CONTACTOR
24 VOL 6 A
TRAFO 6 A
UPS 10 A
A2
ANAKART
KLMS-001
110
TRAFO
0V(N)
ANONS
PE
1000
100
+ 24 V
-0V
N L
UPS GN
UPS GL
UPS ÇN
UPS ÇL
PRİZ
MP
PE
N
N
1
1
KAÇAK AKIM
R S T
KONTAKTÖR A1
24 VOL 6 A
TERMİK
TRAFO 6 A
UPS 10 A
A2
KL1
FR1
11
ANAKART
100
1000
100
VALF K.
100 LAMBASI
DİRENÇ
1000
1000
TEL+
KLMS-001 TEL-
ANONS
TRAFO
0V(N)
PE
+ 24 V
-0V
UPS GN
UPS GL
UPS ÇN
UPS ÇL
N L PAKO ŞARTEL
MP
PE
N
N
1
1
PRİZ
R S T
KONTAKTÖR
KAÇAK AKIM
24 VOL 6 A
TERMİK
TRAFO 6 A
NC A1
UPS 10 A
NC A2
RPB
RPA
1000 1000
VALF K.LAMBASI
140
130
120
KLMS-001
ANONS KARTI
24 VDC
1000
HP +
HP -
S1A
S1B
100
1000
100
SA
SB
HP-
HP+
KLMS-001
220 V
CABLE CONNECTION
- Stoppers should be placed where the door closes the opening and closing process.
- Take the handle to the center position and remove it manually.
- Give the motor power. When energized, the L1-L2 LEDs on the door card will start flashing.
This means that the flasher, photocell, etc., which are connected to the motor. is the introduction of
devices such as.
- Press and hold both of the SET-OPEN buttons for identification, and pull your hand as the
burning speed of the L1-L2 LEDs accelerates.
- Wait until the L3-L4 LEDs flash.
- When the L3-L4 LEDs start blinking, hold down the SET-CLOSE button until the motor moves.
- The engine will first move in the closing direction, then in the opening direction, the last closing
operation will be stopped.
24
Tel : +90 352 247 44 44 Fax: +090 352 241 18 19 Web :www.vini.com.tr E-mail : info@vini.com.tr
NİCE 1024 CERTIFIED AUTOMATIC DOOR SETTING MENU
- Press and hold the SET button, release when L1 starts blinking.
- Press the OPEN-CLOSE button and pull the L3 LED.
- Press and hold the SET button.
- Press and hold OPEN and CLOSE keys to release the SET button.
- Release all buttons when the desired setting is reached.
- Wait 10 seconds.
L1> Slow Fast L2> Medium Speed L3> Fast L4> Very Fast
- Press and hold OPEN and CLOSE buttons for about 10 seconds at the same time.
- Take your hand.
- The factory settings have been restored.
-LK+
- + +R
ENC
SWITCH
+M-
G1 0 1 1 2 3 8 9
COM
DOOR
RELAY
PP
SPPED
ADJUSTMENT
OPEN
PP COM
POWER
VM TC 1 2 3 4 5 6 IN SA ALARM
CABLE CONNECTION
MENU ADJUST
26
Tel : +90 352 247 44 44 Fax: +090 352 241 18 19 Web :www.vini.com.tr E-mail : info@vini.com.tr
DOOR PP PP COM L 220 V
RELAY FEED
24V N LOG IN
0V
P+
E1
E2
20
21
P-
24
20
5
A B C D E F
ON
30
1 2 3 4 5 6
P
2 - + 180
P1
T
75
G H I J K L
50 - + 100 ON
P2
1 2 3 4 5 6
CABLO CONNECTION
Bridge the E1 and E2 terminals.
- Connect the cable to the door relay (PP) from terminal 20. Connect the return of the door to the
open leg by means of the door device (24)
1- RECEIVE
The DIL switch DIL A1 (power arm / mounting type) must be set before commissioning.
(A1 must be in the off position.)
2- MOTORUN EXERCISE
- Close the door.
- Create the motor current supply.
- Switch on the operation switch. The indicator will flash rapidly for 2 seconds.
- Check the DIL switch settings.
- Press the T button.
- Door 2 makes full movement (open and close). It detects the motor path and the required forces
during door movements.
(The door will move to the closing position.)
3- DIL SUCTION SETTINGS
- DIL-switch A1 Power Strap / Mounting Type: A1 should stay in off position.
- DIL- switch B2 Half Automatic: B2 Receive in ON position.
If you want to switch to automation after 2 degree manual door movement, press the P key after the
LED flashes 1 time.
Press the T button if you want to switch to the automation after the 4 degree manual door
movement. Press the P button after the led 2 times blinks.
If you want to switch to automatic mode after 6 degree manual door movement, press T button 2
times and then press P button after flashing 3 times.
Press the T button 3 times if you want to switch to the automation after the 10-degree manual door
movement. Press the P button after the led 4 times blinks.
- DIL switch C3 Open Time / Door Closer Function: Set to C3 ON position.
LED for 2 seconds open time Press P key after flashing 1 timeon for 6 seconds to remain on.
27
Tel : +90 352 247 44 44 Fax: +090 352 241 18 19 Web :www.vini.com.tr E-mail : info@vini.com.tr
Press the T button twice for 10 seconds while the LED is on. Press the P button after 3 times.
Press the T button 3 times for the duration of 15 seconds of on-off. Press the button 4 times and
then press Patically.
Press the T button 4 times for 30 seconds on-time. Press the P COMPREH button after 5 times.
Press the T button 5 times for 60 seconds on-time. Press the P compreh after the led 6 times flashes.
- DIL-switch D4 Door Signals Signaling:
The engine lamp lights up the engine lamp.
D4 Press ON twice Press T button twice Press the P compreh after the led flashes 3 times.
- DIL switch E5 Front Warning / Pre Warning Type
Beeper is signaled BEFORE door movement in door-close direction and lamp flashes 3 times.
E5 Press ON twice. Press T button twice. Press 3 times and then press Patically.
28
Tel : +90 352 247 44 44 Fax: +090 352 241 18 19 Web :www.vini.com.tr E-mail : info@vini.com.tr
12 1 Piston down movement valve and
bobbin
2 Lower speed adjusting screw
7 Downward speed adjusting screw
E
2 7 - the clockwise speed decreases (-)
- speed increases counterclockwise
16 (+)
10 Pressure adjusting screw
- the pressure in the clockwise
1 14 10 direction increases (+)
F - the pressure decreases in the
98 opposite direction (-)
13 12 Piston connection point
M
13 Upward adjustment screw
- decreases clockwise (-)
P - reverse in reverse (+)
14 Emergency landing button
16 Down speed adjustment screw
- the clockwise speed decreases (+)
- increase in speed in the opposite
direction (-)
d 98 Downward departure adjustment
98 screw
- hardens clockwise (+)
- softens in the opposite direction (-)
7
E Pump intake valve
h F Up direction working
1 M 13 1 M movement valve
M Motor
12 2
P Pump
16
10
1 24V 13
DC 98
14
R
Tarih (Date) 01.01.2017
29
Tel : +90 352 247 44 44 Fax: +090 352 241 18 19 Web :www.vini.com.tr E-mail : info@vini.com.tr
DİSABLED SYSTEMS DESTEL TEYP
- See if he has a open mechanical lock. -
Make sure the platform is on the floor. -
DON'T OPEN DOOR Check that M1 142 (on the board) is
burning at the same time.
-
MOTOR WORKING BUT DON' T The direction of the motor may be
WORKING PLATFORM reversed. ( will turn clockwise.) - The oil
level of the tank may be insufficient.
VALVE OPENING PLATFORM DON'T - The cabin may be stuck. -Evaluous valve
DOWN can be activated. -You may have entered
the circuit board. (2/1 hang)
-
The door automation may have failed. -If
the door has been pressed several times,
OPEN DOOR STOP the door card is broken and remains in the
jammed state. (Turn off the power and turn
it on.) -Air button or floor button may be
pressed.
1-A smooth concrete floor should be created. Recommended concrete 1800 * 1800 mm. 150 mm. thick matted.
5-Product installation or after opening the monthly periodic maintenance check out does not necessarily has to be done or should be committed..