You are on page 1of 3

                             SAFETY WALK REPORT

Date:13/11/2021

Team Members Saqib Hameed Khan HSSE


        
Sr Description Yes No N/ Remarks
A
1. Have All employees received induction training?
2. Do all know the company’s health & safety rules?
3. Are all familiar with how to report hazards & incidents?
4. Are there emergency facilities and an evacuation procedure/route for the site?

5. Do all have access to appropriate emergency and first aid equipment?


6. Have you asked the person in charge about all relevant hazards?
7. Do you company have the correct procedures and equipment to do the work safely?

8. Is there appropriate separation of vehicles and people during the proposed work?

9. Is all required electrical/mechanical equipment in a safe condition?


10. Are hazardous/dangerous substances used and stored according to their safety data
sheets?
11 Have HSE team consulted with workers about the task and the safe way to do it?

12. Do you have all necessary PPE?


13. Have you got a safe way of getting in and out of your work area?
14. Have any manual handling risks been identified and accessed?
Work Area
15 General housekeeping (neat , tidy and dust free)
16 Walkways (free from debris and obstructions)
17 Work surfaces ( clear of clutter and dust)
18 Edges, sides and holes(covered and protected)
19 Worksite hazards(identified and marked)
20 Material storage/Laydown
Personnel Protective Equipment
21 Hard hats( available, worn by crew and in safe condition)
22 Safety glasses with side shields( available, worn by crew and in safe condition)

23 Face shields, Goggles( available, worn by crew and in safe condition)


24 Respiratory Protection( available, worn by crew and in safe condition)------
25 Hearing protection( available, worn by crew and in safe condition)
26 Gloves ( available, worn by crew and in safe condition)
27 Foot Protection( fit for task, worn by crew and in safe condition)
28 Appropriate clothing( available, worn by crew and in safe condition)
Fall Protection Equipment
29 Fall protection equipment inspected regularly and before use
30 Appropriate platform is used by crew where applicable
31 Appropriate anchorage point available.
Ladders
32 Ladders are well maintained and in satisfactory condition
33 Ladders base, footing and setup is as per standard
34 Proper ladders are for task
Tools and Equipment
35 Is the general condition of tool safe and good.
36 Tools and equipment are inspected and recorded
37 Right tools are for the right task
38 Crew members are trained in the use of tools and equipment.
Excavations
39 Access/egress is safe and frequency of egress is acceptable.
40 Shoring/shielding/sloping is safe
41 Barricades are in place as per requirement.
42 Excavated material is placed 1meter far from edges.
Electrical safety
43 Is the GFCI installed?

44 Extension cords are not causing trip hazard or used inappropriately,


45 Power tools are damage free and fit for purpose.

You might also like