Professional Documents
Culture Documents
Nuts B
Washers C
Screws D
Metric E
Serving your fastener needs since 1962
Construction I
Miscellaneous K
Technical Information L
16555 West Glendale Drive
New Berlin, WI 53151
American Bolt Corp
Established 1962
Phone
262.786.6530
800.588.1200
Fax
262.786.3530
www.americanboltcorp.com
American Bolt Corporation's mission is to deliver the highest quality products and service at
a competitive price. Our goal is to exceed the customer's expectations. Through investment
in inventory and personnel, we will build long-term relationships with our customers and
anticipate their needs. We are committed to working as a team with the customer and within
the company. Through these efforts, we plan to grow well into the future.
The American Bolt Advantage
Experience American Bolt prides itself on an experienced and knowledgeable sales team
who can offer more than simply referencing their company’s part number.
The following chart lists our sales people and the number of years of
experience that they have in the fastener industry:
Service With our fleet of trucks American Bolt can meet all your delivery needs.
Orders can be filled immediately and be ready for pick up the same day.
Hours: Monday – Friday 6am – 6pm
Inventory With 65,000 square feet of warehoused material, American Bolt carries a
large amount of standard items; we also carry a wide range of nonstandard
and hard to find items. If you are having trouble locating a special item,
there is a good chance that American Bolt can help you out.
Competitive Buying in bulk from our suppliers, and importing when cost effective, allows
Pricing us to offer our customers a competitive price.
Consignment American Bolt will invoice the customer only after they have used the
Programs parts.
2
www.americanboltcorp.com 1.800.588.1200
The American Bolt Advantage
Bins If your current bins are not adequate, American Bolt can supply them for you.
We provide a large selection of sizes and styles, which can be purchased or
leased.
Labels We offer a variety of different bar coded labels to meet all your requirements.
Labels can show size, description, customer part number, minimum/maximum
amounts, and location.
Technology We use hand held scanners, which eliminates any writing errors and creates an
immediate order.
Inventory Our goal is to reduce your inventory levels, by analyzing the usage of all the
parts you inventory. We determine the correct amount of turns per year for each
part. American Bolt will also inventory, in our facility, a minimum 3 month
supply for parts on your VMI program to help avoid outages due to spikes in
production.
Reports We provide customers with a variety of usage reports. Since each bin receives its
own unique tag number, reports can be generated for separate locations through-
out a customer’s facility or for their cumulative usage. Our reports can be created
for any time interval.
Flexible Our VMI programs are designed around each customer and are tailored to their
unique requirements. Flexible billing schedules can be arranged and since parts
are delivered with our trucks customers won’t be charged for freight.
3
Fax 1.262.786.3530 www.americanboltcorp.com
The American Bolt Advantage
Automated point of use distribution systems, which offer secure inventory control with
accountability are available. These systems offer superior inventory control, single-item
security, accountability of use, and electronic ordering.
For more information please contact us.
4
www.americanboltcorp.com 1.800.588.1200
The American Bolt Advantage
Kits We can build custom kits by packaging with any combination of parts,
including items supplied by the customer
Rods can be cut to any length. Same day delivery available if required.
5
Fax 1.262.786.3530 www.americanboltcorp.com
The American Bolt Advantage
Exotic materials
Don’t take a chance when buying exotic materials. Exotic materials are generally used in
critical applications, and can be very expensive with long lead times. A mistake can be
extremely costly. This is why it is important to deal with a company that has the experience
and knowledge to handle your specialty hardware. American Bolt has a proven history
supplying specialty items and exotic materials.
Stainless
17-4 PH 321 B6
17-17 PH 330 B8 CL 1 & 2
304 - 304L 347 B8M CL 1 & 2
304SH 410 Carp 20
309 416 Duplex Alloys
310 420 Nitronic 50
316 - 316L 422 Nitronic 60
316SH 430
317 - 317L
All other standards including Military and Federal Mil-S-1222, ASME, SAE, Din, IFI, ISO, and
Metric stainless.
6
www.americanboltcorp.com 1.800.588.1200
The American Bolt Advantage
7
Fax 1.262.786.3530 www.americanboltcorp.com
The American Bolt Advantage
Overcoming Galling in Stainless Steel
Galling is the result of two metal’s surfaces being rubbed together under a load sufficient to break through the oxide film that
covers their surfaces, thus allowing the mating surfaces to come into contact at their high points. When the force between the
two metals exceeds the strength of either material; cold welding occurs. If not dealt with at the time of assembly, cold weld-
ing or galling as it is more commonly called could occur. Galling occurs more readily if the metals are being operated at an
elevated temperature. If care is not exercised to prevent galling, a stainless nut may become frozen solid on a stainless bolt.
The probability of galling can be minimized or prevented via:
Use of Dissimilar Materials
Galling can be minimized easily by combining a stainless steel bolt with a non-ferrous nut. Such as brass or bronze: There are
two likely objections to this. First, the non-ferrous material may not withstand the corrosive environment that the application
calls for. Second, there is a danger of galvanic corrosion due to the presence of two entirely different metals on contact.
Hardening
It is well known that hard surfaces will gall less than soft surfaces. It may not be so well know that a hard surface and a soft
surface work together better than two hard surfaces or two soft surfaces. One remedy to galling may be to harden one surface
more than the other. Stainless steel can me machined at any hardness up to about 300 Brinell. By having one surface annealed
or softened and the other hardened to 250 to 300 Brinell may greatly reduce the occurrence of galling. For example, combining
a Type 302 HQ bolt with a heat treated Type 416 stainless steel nut causes the moving part in the assembly to be harder than the
stationary bolt, thus reducing the tendency to gall.
Chemical Composition
The addition of free machining additives such as sulphur or selenium to both the 300 and 400 series stainless steels greatly
reduces the tendency to gall. Stainless grades such as Type 303, 416, 430 F fall into this category of “anti-friction” stainless
steels. Type 416 has the added advantage of being able to be heat treated, greatly increasing its anti-galling abilities; though its
lack of nickel may cause corrosion problem. A possible solution would be to combine a Type 304 stainless bolt with a Type 316
stainless nut.
Plating
The use of material such as chromium or silver to plate the moving part can greatly reduce the change of galling. The use of
these materials changes the surface hardness of one of the parts, reducing the galling, and does not wear off of the fastener as
quickly as a grease would. The life of such a plating material would survive more on/off situations than a grease or oil product
would.
Waxes, Greases, and Oils
This group offers many advantages that the other groups do not. Chief of which is cost. Greases and oils are the easiest and
most inexpensive method to use. However, they do not offer a long life and may require extensive clean up. Waxing may be an
all around solution. It can be applied to either the moving or stationary part. It can be dyed for identification or left clear so as
not to cause aesthetic problems. The dry wax finish lasts as long as parts are not used to the extent that the wax was worn off.
Many on/off situations can occur without any difficulty. Moreover, all but the most extreme exposure to outdoor weather condi-
tions will not affect the wax coating. The shelter of the mating parts will protect this anti-galling compound.
Control of Surface Roughness
The control of surface roughness may be all that is required in many applications to prevent galling. The ideal surface is one
that is free of machining burrs, fins and tears, and is not overly rough or smooth. For most applications, a surface roughness in
the range of 15 to 50 microinches is best. The drawback here may be the added cost of surface treatment to a commercial grade
fastener. This may far outweigh the cost of other solutions.
Decrease the Contact Load
Contact load maybe the least subject to manipulation but, nevertheless, must be controlled to the extent that the excessive loads
are avoided. When assembling stainless steel fasteners; over tightening may be the shortest road to galling. For example, some
field assemblers may try to tighten a stainless bolt the same as they would a grade 8 bolt. That one extra turns maybe your gall-
ing problem.
As you can see galling is certainly a perplexing problem, with many different solutions. While, all metals seem to have this
problem, it is emphasized in high chromium stainless steels.
Please contact us and we’ll help supply you with all the fasteners your company needs. We are ready to advise you on the vari-
ous costs and delivery times involved in the above methods of galling prevention.
8
www.americanboltcorp.com 1.800.588.1200
Brand Names
Akro-Mills Holo-Krome
Storage Bins Socket Products
Infasco
Fasteners
Alfa Tools
Standard and specialty tools
Northwestern Tools
Tooling & manufacturing products
Cooper Tools
Campbell, Caulk Master, Crescent, Erem,
Kahnetics Lufkin,Nicholson, Plumb, H.K. Regal Beloit
Porter, Weller, Wire-Wrap, Wiss, Xcelite Cutting Tools
Precision
Drill bits and cutting tools
Chicago Hardware
Forged and bent wire products
Safeway Sling USA
Nylon slings and ratchets
Saws Unlimited
CRC Industries Standard and custom blades
Chemical maintenance solutions
A1
Fax 1.262.786.3530 www.americanboltcorp.com
A Hex Head Cap Screws
Materials Grades 2, 5, 8
Stainless Steel
Brass, Bronze, Aluminum, Nylon
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
1/4
2 31.2 2 49.9 2 71.9
2 1/4 34.6 5/16 2 1/4 55.2 2 1/4 79.7
2 1/2 38.1 2 1/2 60.6 3/8 2 1/2 87.4
2 3/4 41.5 2 3/4 66.0 2 3/4 95.2
3 45.0 3 71.4 3 103.0
3 1/4 48.5 3 1/4 86.8 3 1/4 110.8
3 1/2 51.9 3 1/2 82.1 3 1/2 118.5
4 58.8 3 3/4 87.5 3 3/4 126.3
4 1/2 65.7 4 92.9 4 134.0
5 72.6 4 1/2 103.7 4 1/2 149.5
-20 NC 5 1/2 79.5 5 114.4 5 165.0
-28 NF 6 86.4 -18 NC 5 1/2 125.2 5 1/2 180.6
-24 NF 6 135.9 6 196.1
-16 NC 6 1/2 206.0
-24 NF 7 222.0
A2
www.americanboltcorp.com 1.800.588.1200
Hex Head Cap Screws A
Materials Grades 2, 5, 8
Stainless Steel
Brass, Bronze, Aluminum, Nylon
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
3/4
5 72.4
5/8
5 48.6 6 118.4
5 1/2 52.9 5 1/2 78.6 6 1/2 126.9
6 57.3 6 84.8 7 135.3
6 1/2 61.6 6 1/2 91.1 7 1/2 143.8
7 65.9 7 97.3 8 152.3
7 1/2 70.2 7 1/2 103.5 8 1/2 159.0
8 74.5 8 109.7 9 168.0
8 1/2 78.8 8 1/2 116.0 9 1/2 176.0
9 83.1 9 122.2 10 184.0
9 1/2 87.4 9 1/2 128.4 11 201.0
10 91.7 10 134.6 12 217.0
11 99.1 10 1/2 139.0 13 234.0
12 107.0 11 145.0 14 250.0
13 115.0 12 185.0 16 283.0
14 123.0 13 170.0 -9 NC 18 316.0
16 140.0 14 182.0 -14 NF 20 349.0
-11 NC 18 157.0 -10 NC 15 194.0
-18 NF 20 173.0 -16 NF 16 206.0
For Technical Information see page L2-L3
A4
www.americanboltcorp.com 1.800.588.1200
Hex Head Cap Screws A
Materials Grades 2, 5, 8
Stainless Steel
Brass, Bronze, Aluminum
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
1
5 1/2 146.2 9 1/2 300.0 14 530.0
6 157.2 10 313.0 16 597.0
6 1/2 170.0 12 368.0 -7 NC 18 664.0
7 180.0 13 409.0 -12 NF 20 731.0
7 1/2 191.0 14 422.0
8 202.0 16 476.0
8 1/2 213.0 -7 NC 18 531.0
9 223.0 -12 NF 20 585.0
9 1/2 234.0
10 245.0
11 266.0
12 288.0
13 309.0
14 331.0
16 374.0
-8 NC 18 417.0
-14 NF 20 460.0
A6
www.americanboltcorp.com 1.800.588.1200
heavy hex structural bolts A
(with nuts)
Materials A325 & A490 Type 1 & 3
Nuts A563
Threading UNC - Coarse
Finishes Plain Plated
Hot-Dip-Galv Mech Galv
5/8
1 1/2 650 19.2 6 1/2 150 76.3
1 3/4 600 16.0 7 150 80.6
2 550 16.7 7 1/2 140 84.9
2 1/4 500 17.7 -11 NC 8 140 87.5
2 1/2 450 18.5
1 1/2 400 52.5
2 3/4 425 19.4
1 3/4 375 55.3
1/2 3 400 20.2
2 350 59.6
3 1/4 400 22.3
2 1/4 325 61.6
3 1/2 350 23.3
2 1/2 300 64.7
3 3/4 325 24.0
2 3/4 275 67.8
4 300 24.9
3 250 71.0
4 1/2 250 28.7
3 1/4 225 74.0
5 200 30.8
3 1/2 225 77.1
-13 NC
5 1/2
6
200
175
37.0
38.8 3/4 3 3/4 200 80.2
4 200 83.3
1 1/2 650 34.0 4 1/4 200 86.4
1 3/4 600 35.3 4 1/2 175 89.3
2 550 37.4 5 150 95.8
2 1/4 500 40.6 5 1/2 150 102.0
2 1/2 450 41.7 6 135 108.0
2 3/4 425 43.9 6 1/2 125 114.0
5/8 3 400 46.1 7
7 1/2
125
110
121.0
124.1
3 1/4 400 48.2
3 1/2 350 50.4 -10 NC 8 110 133.0
3 3/4 325 52.5
4 300 54.7
4 1/2 250 59.0
5 200 62.7
-11 NC 5 1/2 200 67.7
For Technical Information see page L5
A7
Fax 1.262.786.3530 www.americanboltcorp.com
A heavy hex structural bolts
(with nuts)
Materials A325 & A490 Type 1 & 3
Nuts A563
Threading UNC - Coarse
Finishes Plain Plated
Hot-Dip-Galv Mech Galv
7/8
4 150 120.0
1
4 1/4 110 168.0
4 1/4 150 124.0 4 1/2 110 173.0
4 1/2 125 128.4 4 3/4 110 179.0
4 3/4 125 133.0 5 100 184.0
5 125 137.0 5 1/4 100 190.0
5 1/2 110 146.0 5 1/2 95 196.0
6 100 153.6 6 95 206.0
6 1/2 100 163.0 6 1/2 75 218.0
7 90 171.0 7 70 229.0
7 1/2 85 179.0 7 1/2 70 240.0
-9 NC 8 75 186.6 -8 NC 8 60 250.0
A8
www.americanboltcorp.com 1.800.588.1200
heavy hex structural bolts A
(with nuts)
Materials A325 & A490 Type 1 & 3
Nuts A563
Threading UNC - Coarse
Finishes Plain Plated
Hot-Dip-Galv Mech Galv
A9
Fax 1.262.786.3530 www.americanboltcorp.com
A tension control bolts
with nut & washer assembly
Materials ASTM F1852 & F2280 Type 1 - Alloy Steel
Type 3 - Weathering Steel
Threading UNC - Coarse
Finishes Plain
Mech Galv
A10
www.americanboltcorp.com 1.800.588.1200
carriage bolts A
Materials Grades 2, 5, 8
Stainless Steel
Threading UNC - Coarse
Finishes Plain
Plated
Hot Dip Galv
A11
Fax 1.262.786.3530 www.americanboltcorp.com
A carriage bolts
Materials Grades 2, 5, 8
Stainless Steel
Threading UNC - Coarse
Finishes Plain
Plated
Hot Dip Galv
1/2
4 21.9 7 65.6 8 105.0
4 1/2 24.6 8 71.6 9 117.0
5 26.3 9 80.0 10 130.0
5 1/2 29.1 10 88.4 12 154.0
6 31.4 12 104.6 14 175.0
7 43.6 14 122.0 16 202.0
8 44.6 16 138.0 18 226.0
9 52.5 -11 NC 18 154.0 -10 NC 20 250.0
10 54.6
12 66.1
14 77.5
16 88.3
-13 NC 18 99.3
A12
www.americanboltcorp.com 1.800.588.1200
Plow Bolts - No. 3 head A
Materials Grades 5 & 8
Threading UNC - Coarse
Finishes Plain
Plated
Wt per
Diameter Length
100 Pcs
1 1/4 5.1
7/16 2 8.1
2 1/4 9.1
-14 NC 2 1/2 10.2
1 1/4 7.5
1/2
2 1/4 12.6
2 1/2 14.0
3 16.7
-13 NC 3 1/2 22.6
2 17.5
5/8
2 1/4 19.6
2 1/2 21.8
3 26.1
-11 NC 3 1/2 30.5
2 25.5
2 1/4 28.1
3/4
2 1/2 31.2
2 3/4 34.3
3 37.4
3 1/4 43.6
-10 NC 3 1/2 49.8
A13
Fax 1.262.786.3530 www.americanboltcorp.com
A Elevator Bolts
Materials Grade 2
Threading UNC - Coarse
Finishes Plain
Plated
Wt . per
Diameter Length
100 Pcs
3/4 3.0
1 3.1
1/4
1 1/4 3.5
1 1/2 3.8
1 3/4 4.0
2 4.5
3/4 2.3
1 2.5
1 1/4 2.6
5/16 1 1/2 2.9
1 3/4 3.0
2 3.6
2 1/2 4.0
1 3.8
1 1/4 4.1
1 1/2 4.4
3/8 1 3/4 4.6
2 4.9
2 1/2 6.0
3 6.9
A14
www.americanboltcorp.com 1.800.588.1200
Hex Head Lag Screws A
Materials Grades 2
Stainless Steel
Finishes Plain
Plated
Hot Dip Galv
A15
Fax 1.262.786.3530 www.americanboltcorp.com
A Hex Head Lag Screws
Materials Grade 2
Stainless Steel
Finishes Plain
Plated
Hot Dip Galv
5/8
5 1/2 48.3 5 26.9 6 78.4
6 51.9 1/2 5 1/2 29.1 6 1/2 83.6
3/4
6 1/2 55.4 6 31.4 7 88.9
7 59.0 6 1/2 33.6 7 1/2 94.1
7 1/2 62.6 7 35.9 8 99.3
8 66.2 8 40.5 8 1/2 104.6
9 73.4 9 45.0 9 110.0
10 80.6 10 49.5 9 1/2 115.0
12 95.0 11 54.0 10 120.0
12 58.5 11 131.0
12 141.0
14 151.5
16 162.0
A16
www.americanboltcorp.com 1.800.588.1200
A
Flat Head Cap Screws
Materials Grade 2
Stainless Steel
Brass
Finishes Plain
Plated
Diameter Length Wt. per Diameter Length Wt. per Diameter Length Wt. per
100 Pcs 100 Pcs 100 Pcs
3/4 4.5 1 11.0 1 1/4 17.7
1 5.6 1 1/4 11.5 1 1/2 20.5
1 1/4 6.8 1 1/2 13.0 1 3/4 23.0
1 1/2 7.7 1 3/4 15.0 2 25.5
1 3/4 8.2 2 16.7 2 1/4 28.0
1/2 2 9.9 2 1/4 18.5 2 1/2 30.7
3/4
2 1/4 11.2 2 1/2 20.0 2 3/4 35.0
2 1/2 12.8 5/8 2 3/4 22.8 3 35.7
2 3/4 14.4 3 23.7 3 1/2 40.7
3 16.0 3 1/2 27.7 4 45.5
3 1/2 20.0 4 31.5 4 1/2 56.3
-13 NC 4 23.8 4 1/2 41.0 5 69.6
5 51.0 6 82.9
6 61.7 7 96.0
7 72.0 -10 NC 8 109.2
-11 NC 8 83.0
A17
Fax 1.262.786.3530 www.americanboltcorp.com
A Socket Head Cap Screws
Materials Alloy Steel
Stainless Steel
Threading UNC - Coarse
UNF - Fine
#0
1/8 0.1 1/4 0.1 1/4 0.3
3/16 0.1 3/8 0.1 3/8 0.3
-80 NF 1/4 0.1 1/2 0.2 1/2 0.4
Key size 3/8 0.1 #4 5/8 0.2 5/8 0.4
.050 1/2 0.1 3/4 0.3 #6 3/4 0.4
#1
1/8 0.1 7/8 0.3 7/8 0.5
3/16 0.1 1 0.4 1 0.5
-72 NF 1/4 0.1 -40 NC 1-1/4 0.4 1-1/4 0.6
Key size 3/8 0.1 -48 NF 1-1/2 0.4 1-1/2 0.6
1/16 1/2 0.1 Key size 1-3/4 0.5 -32 NC 1-3/4 0.7
3/16 0.1 3/32 2 0.5 -40 NF 2 0.7
1/4 0.1 1/4 0.2 Key size 2-1/4 0.8
#2 3/8 0.1 3/8 0.3 7/64 2-1/2 0.9
1/2 0.2 1/2 0.3 1/4 0.4
-56 NC
5/8
3/4
0.2
0.3
#5 5/8 0.3 3/8 0.5
3/4 0.4 1/2 0.5
Key size 7/8 0.3 7/8 0.4 5/8 0.6
5/64 1
3/16
0.4
0.1
1 0.4 #8 3/4 0.7
-40 NC 1-1/4 0.4 7/8 0.7
#3
1/4 0.1 -44 NF 1-1/2 0.5 1 0.8
3/8 0.1 Key Size 1-3/4 0.5 1-1/4 0.9
1/2 0.2 3/32 2 0.6 1-1/2 1.1
-48 NC 5/8 0.2 -32 NC 1-3/4 1.3
-56 NF 3/4 0.3 -36 NF 2 1.5
Key size 7/8 0.3 Key Size 2-1/4 1.8
5/64 1 0.4 9/64 2-1/2 2.0
A18
www.americanboltcorp.com 1.800.588.1200
Socket Head Cap Screws A
Materials Alloy Steel
Stainless Steel
Threading UNC - Coarse
UNF - Fine
A19
Fax 1.262.786.3530 www.americanboltcorp.com
A Socket Head Cap Screws
Materials Alloy Steel
Stainless Steel
Threading UNC - Coarse
UNF - Fine
A20
www.americanboltcorp.com 1.800.588.1200
Socket Head Cap Screws A
Materials Alloy Steel
Stainless Steel
Threading UNC - Coarse
UNF - Fine
A21
Fax 1.262.786.3530 www.americanboltcorp.com
A Socket Head Cap Screws
Materials Alloy Steel
Stainless Steel
Threading UNC - Coarse
UNF - Fine
Socket Head Alloy Steel Cap Screws available in longer lengths and through 3" diameter as semi-standards.
For Technical Information see page L44
A22
www.americanboltcorp.com 1.800.588.1200
Low head Socket Cap Screws A
Materials Alloy Steel
Threading UNC - Coarse
UNF - Fine
#10
3/8 0.4
1/2 0.5
-24 NC 5/8 0.095 0.6
-32 NF 3/4 0.7
Key Size 3/32 1 0.8
1/4
3/8 0.7
1/2 0.8
-20 NC 5/8 0.125 1.1
-28 NF 3/4 1.2
Key Size 1/8 1 1.3
5/16
1/2 1.4
3/4 1.8
-18 NC 1 0.156 2.2
-24 NF 1-1/4 2.8
Key Size 5/32 1-1/2 3.3
3/8
1/2 2.2
3/4 2.8
-16 NC 1 0.187 3.5
-24 NF 1-1/4 4.2
Key Size 3/16 1-1/2 5
1/2 1 3.7
-13 NC 1-1/4 0.250 4.1
Key Size 1/4 1-1/2 4.7
A23
Fax 1.262.786.3530 www.americanboltcorp.com
A Flat Socket Head Cap Screws
Materials Alloy Steel
Stainless Steel
Threading UNC - Coarse
UNF - Fine
-40 NC
3/4
1
0.3
0.3 -32 NC
1
1-1/4
0.6
0.6
1/4 1
1-1/4
1.4
1.7
Key Size 1-1/4 0.4 Key Size 1-1/2 0.7 1-1/2 2.1
5/64 1-1/2 0.5 3/32 1-3/4 0.8 1-3/4 2.5
1/4 0.1 3/8 0.4 2 2.8
3/8 0.2
#10
1/2 0.5 -20 NC 2-1/4 2.9
#5 1/2 0.2 5/8 0.6 -32 NF 2-1/2 3.0
5/8 0.3 3/4 0.6 Key Size 2-3/4 3.2
3/4 0.3 1 0.8 5/32 3 3.8
-24 NC
-40 NC 1 0.3 1/2 1.6
Key Size 1-1/4 1.0
Key Size 1-1/4 0.4 5/8 1.7
5/64 1/8 1-1/2 1.2
1-1/2 0.5 3/4 2.0
1/4 0.2
5/16
1 2.4
#6 3/8 0.2 1-1/4 2.9
1/2 0.3 1-1/2 3.4
-32 NC 5/8 0.3 1-3/4 4.0
Key Size 3/4 0.3 2 4.5
5/64 1 0.4 -18 NC 2-1/4 5.1
-24 NF 2-1/2 5.5
Key Size 3 6.2
3/16 3-1/2 7.4
A24
www.americanboltcorp.com 1.800.588.1200
Flat head Socket Cap Screws A
Materials Alloy Steel
Threading UNC - Coarse
UNF - Fine
7/16
1-1/4 5.6 1-1/2 15.2
1-1/2 6.8 1-3/4 17.2
1-3/4 7.6 2 18.8
-14 NC
2
2-1/4
8.8
9.7
5/8 2-1/4 20.4
2-1/2 22.2
Key Size 2-1/2 10.6 3 27.2
1/4 3 11.8 3-1/2 28.3
4 36.2
-11 NC 4-1/2 40.7
Key Size 5 45.2
5/8 6 56.0
A25
Fax 1.262.786.3530 www.americanboltcorp.com
A Button Head Socket Cap Screws
Materials Alloy Steel
Stainless Steel
Threading UNC - Coarse
UNF - Fine
#4
1/2 0.2 1/2 0.5 5/8 1.6
5/8 0.2 5/8 0.6 5/16 3/4 1.8
3/4 0.2 #10 3/4 0.7 7/8 2.0
7/8 0.2 7/8 0.8 1 2.2
-40 NC 1 0.2 1 0.8 1-1/4 2.7
Key Size 1-1/4 0.2 1-1/4 0.9 -18 NC 1-1/2 3.3
1/16 1-1/2 0.2 1-1/2 1.0 -28 NF 1-3/4 4.0
1/4 0.2 -24 NC 1-3/4 1.1 Key Size 2 4.9
3/8 0.2 -32 NF 2 1.4 3/16 2-1/2 6.7
1/2 0.3 Key Size 2-1/2 1.5 1/2 2.3
1/8 3 1.6 5/8 2.4
#6
5/8 0.3
3/4 0.3 3/8 0.8 3/4 2.6
3/8
7/8 0.3 1/2 0.8 7/8 3.0
1 0.4 5/8 0.9 1 3.3
1-1/4 0.4 1/4 3/4 1.1 1-1/4 4.0
-32 NC 1-1/2 0.4 7/8 1.3 1-1/2 4.6
Key Size 1-3/4 0.5 1 1.4 1-3/4 5.2
5/64 2 0.5 1-1/4 1.6 -16 NC 2 5.9
1/4 0.3 -20 NC 1-1/2 1.9 -24 NF 2-1/2 7.2
3/8 0.3 -28 NF 1-3/4 2.2 Key Size 3 8.5
1/2 0.4 Key Size 2 2.4 7/32 3-1/2 9.1
5/8 0.4 5/32 2-1/2 2.9 1 6.8
#8 3/4 0.5 1/2 1-1/4 8.0
7/8 0.5 1-1/2 9.2
1 0.6 -13 NC 2 11.8
1-1/4 0.6 Key Size 2-1/2 14.1
1-1/2 0.7 5/16 3 17.2
-32 NC
Key Size
1-3/4
2
0.7
0.8
5/8 1 11.6
5/8
Key Size 1-1/4 2.4 1-1/2 13.6 2-1/2 31.6
1/8
1/2
1-1/2 3.2 1-3/4 15.2 2-3/4 34.0
3/8 1.6 2 16.4 3 35.6
1/2 1.6 2-1/4 18.0 3-1/4 38.0
5/16 5/8 2.8 2-1/2 19.6 3-1/2 40.0
3/4 3.2 2-3/4 20.8 3-3/4 42.4
1 3.6 3 22.4 4 44.0
1/4-20 1-1/4 4.0 3-1/4 23.6 1/2-13 4-1/2 49.2
Thread 1-1/2 4.4 3-1/2 25.2 Thread 5 53.2
Key Size 1-3/4 5.2 3/8-16 3-3/4 26.4 Key Size 5-1/2 57.6
5/32 2 5.6 Thread 4 28.0 5/16 6 61.6
3/8 3.6 Key Size 4-1/2 30.4 1-1/2 35.6
1/2 4.0 1/4 5 34.0 1-3/4 38.4
5/8 4.4 2 41.2
3/4 5.2 2-1/4 44.4
1 5.6 2-1/2 48.0
1-1/4 6.4 3/4 2-3/4 51.6
3/8 1-1/2 7.6 3 54.0
1-3/4 8.4 3-1/4 57.6
2 9.2 3-1/2 60.8
2-1/4 9.6 3-3/4 63.6
2-1/2 10.4 4 67.2
2-3/4 11.6 5/8-11 4-1/2 73.6
3 12.4 Thread 5 79.6
5/16-18 3-1/4 13.2 Key Size 5-1/2 86.0
Thread 3-1/2 14.0 3/8 6 92.0
Key Size 3-3/4 14.8
3/16 4 15.6 For Technical Information see page L47
A27
Fax 1.262.786.3530 www.americanboltcorp.com
A Socket Set Screws
Materials Alloy Steel
Stainless Steel
Threading UNC - Coarse
UNF - Fine
Style Cup Point
#3
3/32 0.1 Key Size 7/8 0.3 3/8 0.3
1/16 1 0.4
#10
1/8 0.1 7/16 0.3
-48 NF 5/32 0.1 1/2 0.3
Key Size 3/16 0.1 5/8 0.3
.050 1/4 0.1 3/4 0.4
1/8 0.1 7/8 0.4
#4
3/16 0.1 1 0.5
1/4 0.1 -24 NC 1-1/4 0.6
5/16 0.1 -32 NF 1-1/2 0.7
-40 NC 3/8 0.1 Key Size 1-3/4 0.8
-48 NF 7/16 0.1 3/32 2 0.9
Key Size 1/2 0.1 * Cone, Flat, Half Dog, Full Dog, Knurled, and Brass Points available
.028 5/8 0.2 upon request
5/16
5/8 1.0 1 3.1 -18 NF 2 13.0
3/4 1.2 1-1/4 4.0 Key Size 2-1/2 17.2
7/8 1.4 1-1/2 4.8 5/16 3 21.1
1 1.7 -14 NC 1-3/4 5.0
1-1/4 2.0 -20 NF 2 6.6
1-1/2 2.4 Key Size 2-1/2 7.3
1-3/4 2.6 7/32 3 7.7
-18 NC 2 2.8
* Cone, Flat, Half Dog, Full Dog, Knurled, and Brass Points available
-24 NF 2-1/2 3.1
upon request
Key Size 3 3.4
5/32 3-1/2 3.7 For Technical Information see page L48
A29
Fax 1.262.786.3530 www.americanboltcorp.com
A
Socket Set Screws
Materials Alloy Steel
Stainless Steel
Threading UNC - Coarse
UNF - Fine
Style Cup Point
Wt. Per
Diameter Length
100 Pcs
5/8 5.6
3/4 6.6
7/8 7.1
3/4 1
1-1/4
8.6
11.0
1-1/2 13.6
1-3/4 16.0
-10 NC 2 18.4
Key Size 2-1/2 24.4
3/8 3 29.6
7/8 10.0
7/8 1 11.2
1-1/2 17.6
-9 NC 2 24.0
Key Size 2-1/2 31.2
1/2 3 38.0
1
1 15.2
1-1/2 22.0
-8 NC 2 31.2
Key Size 2-1/2 39.2
9/16 3 51.2
* Cone, Flat, Half Dog, Full Dog, Knurled, and Brass Points available upon request
A30
www.americanboltcorp.com 1.800.588.1200
A
Socket Hex Keys
Materials Alloy Steel
A31
Fax 1.262.786.3530 www.americanboltcorp.com
A Square Head Set Screws
Materials Case Hardened Steel
Stainless Steel
Threading UNC - Coarse
Style Cup Point
1/4
1 1.4 1-1/4 4.0 1-1/2 9.0
1-1/4 1.6 1-1/2 4.7 1-3/4 10.3
1-1/2
1-3/4
1.8
2.0
3/8 1-3/4 5.3
1/2
2 11.5
2 5.9 2-1/4 12.5
2 2.3 2-1/4 6.5 2-1/2 13.5
2-1/4 2.5 2-1/2 7.1 2-3/4 14.7
2-1/2 2.8 3 8.3 3 15.8
-20 NC 3 3.2 3-1/2 9.6 3-1/2 17.6
1/2 1.4 4 10.9 4 20.2
5/8 1.6 4-1/2 12.1 4-1/2 23.4
3/4 1.8 -16 NC 5 13.3 5 26.9
7/8 1.9 3/4 5.1 -13 NC 6 34.4
1 2.2 1 5.8
5/16 1-1/4 2.6 1-1/4 6.3
1-1/2 3.0
7/16
1-1/2 7.5
1-3/4 3.3 1-3/4 8.3
2 3.8 2 9.1
2-1/4 4.2 2-1/4 10.4
2-1/2 4.6 2-1/2 11.6
-18 NC 3 5.1 -14 NC 3 12.9
A32
www.americanboltcorp.com 1.800.588.1200
Square Head Set Screws A
Materials Case Hardened Steel
Stainless Steel
Threading UNC - Coarse
Style Cup Point
A33
Fax 1.262.786.3530 www.americanboltcorp.com
A Threaded Rod
Materials Low Carbon Steel Stainless Steel
A 193 B7 & B16 410 304
A354 Gr BD (Gr. 8) NICU400 316
Brass Aluminum
Threading UNC - Coarse Acme
UNF - Fine Coil
Finishes Plain Plated Hot Dip Galv Rods are stocked in standard 12 ft lengths
Rods can be cut to any length
Diameter NC NF Wt. Per Foot
#2 56 -- .013
#3 48 -- .018
#4 40 -- .024
#5 40 -- .031
#6 32 -- .036
#8 32 -- .054
# 10 24 32 .069
# 12 24 -- .074
1/4 20 28 .122
5/16 18 24 .134
3/8 16 24 .293
7/16 14 20 .402
1/2 13 20 .533
9/16 12 18 .678
5/8 11 18 .843
3/4 10 16 1.235
7/8 9 14 1.705
1 8 14 2.231
1-1/8 7 12 2.811
1-1/4 7 12 3.034
1-3/8 6 12 4.232
1-1/2 6 12 5.122
1-3/4 5 12 6.947
2 4-1/2 12 9.118
2-1/4 4 12 12.45
2-1/2 4 12 15.5
2-3/4 4 12 18.89
3 4 12 22.6
3-1/4 4 12 26.71
3-1/2 4 12 31.11
* Over 1” diameter A193-B7 available in 8 pitch
Metric Sizes also available
A34
www.americanboltcorp.com 1.800.588.1200
Nuts
Finished Full Hex Nuts 2
B
Heavy Full Hex Nuts 3
Finished Hex Jam Nuts 4
Heavy Hex Jam Nuts 5
Finished Hex Slotted Nuts 6
Heavy Hex Slotted Nuts 7
Hex Castle Nuts 8
Wing Nuts 9
Machine Screw Nuts 10
Square Nuts 10
Cap Nuts 11
Coupling Nuts 11
Nylon Insert Lock Nuts 12
Nylon Insert Jam Lock Nuts 13
Heavy Nylon Insert Lock Nuts 14
Heavy Nylon Insert Jam Nuts 15
Unitorque Lock Nuts 16
Hex Reversible Lock Nuts 17
Keps Nuts 17
B1
Fax 1.262.786.3530 www.americanboltcorp.com
Finished Hex Full Nuts
Materials Grades 2, 5, 8
Stainless Steel
Brass, Bronze
B Aluminum, Nylon
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated Hot Dip Galv
B2
www.americanboltcorp.com 1.800.588.1200
Heavy Hex Full Nuts
Materials A194 2H, 8, 8M, 6, 7, 4 Alloy Steel
A563 DH, Gr. C Steel
Stainless Steel Brass
B
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated Hot Dip Galv
B3
Fax 1.262.786.3530 www.americanboltcorp.com
Finished Hex Jam Nuts
Materials Grades 2, 5, 8
Stainless Steel
Brass
B
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
B4
www.americanboltcorp.com 1.800.588.1200
Heavy Hex Jam Nuts
Materials Steel
Stainless Steel
Brass
B
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
Threads Width
Wt. Per
Size Per Inch Across Thickness
100 Pcs
Coarse Flats
1/4 20 1/2 11/64 0.85
5/16 18 9/16 13/64 1.20
3/8 16 11/16 15/64 2.00
7/16 14 3/4 17/64 2.60
1/2 13 7/8 19/64 4.00
9/16 12 15/16 21/64 4.90
5/8 11 1-1/16 23/64 7.00
3/4 10 1-1/4 27/64 11.0
7/8 9 1-7/16 31/64 16.7
1 8 1-5/8 35/64 23.5
1-1/8 7 1-13/16 39/64 32.4
1-1/4 7 2 23/32 45.8
1-3/8 6 2-3/16 25/32 59.3
1-1/2 6 2-3/8 27/32 74.8
1-5/8 5 1/2 2-9/16 29/32 91.6
1-3/4 5 2-3/4 31/32 114
1-7/8 5 2-15/16 1-1/32 134
2 4 1/2 3-1/8 1-3/32 165
2-1/4 4 1/2 3-1/2 1-13/64 227
2-1/2 4 3-7/8 1-29/64 332
2-3/4 4 4-1/4 1-37/64 429
3 4 4-5/8 1-45/64 545
3-1/4 4 5 1-15/16 651
3-1/2 4 5-3/8 2-1/16 818
3-3/4 4 5-3/4 2-3/16
4 4 6-1/8 2-5/16
For Technical Information see page L13
B5
Fax 1.262.786.3530 www.americanboltcorp.com
Finished Hex Slotted Nuts
Materials Grades 2, 5, 8
Stainless Steel
B Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
B6
www.americanboltcorp.com 1.800.588.1200
Heavy Hex Slotted Nuts
Materials Grades 2, 5, 8
Stainless Steel
Threading UNC - Coarse B
UNF - Fine
Finishes Plain
Plated
Threads Wt.
Width Depth
Size Per Inch Width Thickness Per 100
of Slot of Slot
Coarse Pieces
1/4 20 1/2 15/64 5/64 3/32 0.9
5/16 18 9/16 19/64 3/32 3/32 1.5
3/8 16 11/16 23/64 1/8 1/8 2.6
7/16 14 3/4 27/64 1/8 5/32 3.5
1/2 13 7/8 31/64 5/32 5/32 5.7
9/16 12 15/16 35/64 5/32 3/16 7.1
5/8 11 1-1/16 39/64 3/16 7/32 10.2
3/4 10 1-1/4 47/64 3/16 1/4 17.1
7/8 9 1-7/16 55/64 3/16 1/4 27.2
1 8 1-5/8 63/64 1/4 9/32 38.5
1-1/8 7 1-13/16 1-7/64 1/4 11/32 53.7
1-1/4 7 2 1-7/32 5/16 3/8 70.6
1-3/8 6 2-3/16 1-11/32 5/16 3/8 93.3
1-1/2 6 2-3/8 1-15/32 3/8 7/16 118
1-5/8 5 1/2 2-9/16 1-19/32 3/8 7/16 148
1-3/4 5 2-3/4 1-23/32 7/16 1/2 184
1-7/8 5 2-15/16 1-27/32 7/16 9/16 218
2 4 1/2 3-1/8 1-31/32 7/16 9/16 274
2-1/4 4 1/2 3-1/2 2-13/64 7/16 9/16 391
2-1/2 4 3-7/8 2-29/64 9/16 11/16 516
2-3/4 4 4-1/4 2-45/64 9/16 11/16 686
3 4 4-5/8 2-61/64 5/8 3/4 882
3-1/4 4 5 3-3/16 5/8 3/4 1121
3-1/2 4 5-3/8 3-7/16 5/8 3/4 1449
3-3/4 4 5-3/4 3-11/16 5/8 3/4 1730
4 4 6-1/8 3-15/16 5/8 3/4 2093
B7
Fax 1.262.786.3530 www.americanboltcorp.com
Hex castle Nuts
Materials Steel
Threading UNF - Fine
B Finishes Plain
Plated
Threads Wt.
Width Depth
Size Per Inch Width Thickness Per 100
of Slot of Slot
Fine Pieces
1/4 28 1/2 15/64 5/64 3/32 0.9
5/16 24 1/2 21/64 3/32 3/32 1.1
3/8 24 9/16 13/32 1/8 1/8 1.6
7/16 20 11/16 29/64 1/8 5/32 2.8
1/2 20 3/4 9/16 5/32 5/32 4.0
9/16 18 7/8 39/64 5/32 3/16 6.2
5/8 18 15/16 23/32 3/16 7/32 8.0
3/4 16 1-1/8 13/16 3/16 1/4 12.8
7/8 14 1-5/16 29/32 3/16 1/4 20.2
1 14 1-1/2 1 1/4 9/32 28.4
1-1/8 12 1-11/16 1-5/32 1/4 11/32 41.5
1-1/4 12 1-7/8 1-1/4 5/16 3/8 54.5
1-3/8 12 2-1/16 1-3/8 5/16 3/8 75.1
1-1/2 12 2-1/4 1-1/2 3/8 7/16 94.8
1-5/8 12 2-7/16 1-19/32 3/8 7/16 108
1-3/4 12 2-5/8 1-23/32 7/16 1/2 150
1-7/8 12 2-3/4 1-27/32 7/16 9/16 159
2 12 3 1-31/32 7/16 9/16 200
2-1/4 12 3-3/8 2-13/64 7/16 9/16 285
2-1/2 12 3-3/4 2-29/64 9/16 11/16 377
2-3/4 12 4-1/8 2-45/64 9/16 11/16 501
3 12 4-1/2 2-61/64 5/8 3/4 644
B8
www.americanboltcorp.com 1.800.588.1200
wING Nuts
Types Cold Forged Threading UNC - Coarse
Hot Forged UNF - Fine
Die Cast
B
Materials Steel Finishes Plain
Stainless Steel Plated
Brass
B9
Fax 1.262.786.3530 www.americanboltcorp.com
Machine Screw Nuts Square and Hexagon
Materials Steel, Brass
Stainless, Nylon
B Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
Threads Per Inch Width
Wt. Per
Size Across Thickness
Coarse Fine 1000 Pcs
Flats
#2 56 64 3/16 1/16 0.4
#3 48 56 3/16 1/16 0.4
#4 40 48 1/4 3/32 1.1
#5 40 44 5/16 7/64 2.1
#6 32 40 5/16 7/64 2.1
#8 32 36 11/32 1/8 2.8
# 10 24 32 3/8 1/8 3.3
# 12 24 28 7/16 5/32 5.6
1/4 20 28 7/16 3/16 6.2
5/16 18 24 9/16 7/32 12.1
3/8 16 24 5/8 1/4 16.5
For Technical Information see page L17
Regular Square Nuts
Materials Steel
Stainless Steel
Threading UNC - Coarse
Finishes Plain
Plated
Threads Width
Wt. Per
Size Per Inch Across Thickness
100 Pcs
Coarse Flats
1/4 20 7/16 7/32 0.9
5/16 18 9/16 17/64 1.8
3/8 16 5/8 21/64 2.6
7/16 14 3/4 3/8 4.3
1/2 13 13/16 7/16 5.8
5/8 11 1 35/64 10.8
3/4 10 1-1/8 21/32 15.4
7/8 9 1-5/16 49/64 24.5
1 8 1-1/2 7/8 36.3
1-1/8 7 1-11/16 1 52.5
1-1/4 7 1-7/8 1-3/32 70.6
B10
www.americanboltcorp.com 1.800.588.1200
Cap Nuts (Acorn)
Materials Steel, Brass
Stainless
Threading UNC - Coarse B
UNF - Fine
Finishes Plain
Plated
Threads Per Inch Width Height
Size Across Low High
Coarse Fine
Flats Crown Crown
#6 32 5/16 11/32 -
#8 32 5/16 11/32 -
# 10 24 32 3/8 13/32 33/64
1/4 20 28 7/16 15/32 19/32
5/16 18 24 1/2 17/32 11/16
3/8 16 24 9/16 5/8 25/32
7/16 14 20 5/8 11/16 7/8
1/2 13 20 3/4 13/32 1 1/32
5/8 11 18 15/16 1 1 9/32
3/4 10 16 1-1/16 1-5/32 1 29/64
7/8 9 14 1-1/4 1-23/32 1 23/32
1 8 14 1-7/16 1-35/64 1 31/32
Materials Steel
Stainless Steel
Threading UNC - Coarse
Finishes Plain
Plated
* Special sizes available upon request
Threads Per Inch Wt. Per
Size Length
Coarse Fine 100 Pieces
# 10 24 1/4 3/4 0.4
1/4 20 3/8 7/8 2.0
5/16 18 1/2 1-1/8 3.0
3/8 16 5/8 1-3/4 11.4
7/16 14 11/16 1-3/4 10.4
1/2 13 11/16 1-3/4 11.8
5/8 11 13/16 2-1/8 18.4
3/4 10 1 2-1/4 29.6
7/8 9 1 1/4 2-1/2 53.3
1 8 1 3/8 2-3/4 70.3
1-1/4 7 1 5/8 3 97.5
B11
Fax 1.262.786.3530 www.americanboltcorp.com
Nylon Insert Lock Nuts
Type NM ( Machine Screw)
NE (Finished Hex)
B Materials Steel, Stainless
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
B12
www.americanboltcorp.com 1.800.588.1200
Nylon Insert Jam Lock Nuts
Type NTM (Machine Screw)
NTE (Jam Finished Hex)
Materials Steel, Stainless B
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
B13
Fax 1.262.786.3530 www.americanboltcorp.com
Heavy Nylon Insert Lock Nuts
Type NU
Materials Steel, Stainless
B Threading UNC - Coarse
Finishes Plain
Plated
Threads
Width
Per Wt. Per
Size Across Thickness
Inch 100 Pcs
Flats
Coarse
5/16 18 30/53 29/64 2.1
3/8 16 38/55 9/16 3.8
7/16 14 46/61 14/23 4.8
1/2 13 29/33 28/39 8.2
9/16 12 65/69 13/16 10
5/8 11 1-1/15 7/8 14
3/4 10 1-13/51 1-1/67 23
7/8 9 1-4/9 1-7/50 34
1 8 1-12/19 1-5/16 48
1-1/8 7 1-41/50 1-15/32 69
1-1/4 7 2 1-25/39 92
1-3/8 6 2-13/66 1-55/69 120
1-1/2 6 2-5/13 1-71/77 150
1-3/4 5 2-16/21 2-5/16 240
2 4 1/2 3-10/73 2-13/32 310
2-1/2 4 4-1/67 3-11/78 682
B14
www.americanboltcorp.com 1.800.588.1200
Nylon Insert Heavy Jam Lock Nuts
Type NTU
Materials Steel, Stainless
Threading UNC - Coarse B
Finishes Plain
Plated
Threads Width
Wt. Per
Size Per Inch Across Thickness
100 Pcs
Coarse Flats
5/16 18 30/53 20/61 1.4
3/8 16 38/55 8/19 2.7
7/16 14 46/61 29/64 3.3
1/2 13 29/33 6/11 5.4
5/8 11 1-1/15 5/8 9.2
3/4 10 1-13/51 28/39 15
7/8 9 1-4/9 39/49 21
1 8 1-12/19 71/77 30
1-1/8 7 2 1-6/55 57
1-1/4 7 2-13/66 1-3/16 70
1-3/8 6 2-5/13 1-5/16 95
1-1/2 6 2-29/38 1-15/32 140
1-3/4 5 3-10/73 1-43/64 210
2 4 1/2 3-37/72 1-15/16 290
2-1/2 4 4-1/67 2-3/16 430
B15
Fax 1.262.786.3530 www.americanboltcorp.com
UniTorque Lock Nuts
Materials Steel
Threading UNC - Coarse
B UNF - Fine
Finishes Phos & Oil
Plated
Styles Automation
Flange
B16
www.americanboltcorp.com 1.800.588.1200
Hex Reversible Lock Nuts
Materials Steel, Stainless
Threading UNC - Coarse
UNF - Fine B
Finishes Plain
Plated
Keps Nuts
Materials Steel
Threading UNC - Coarse
UNF - Fine
Finishes Plain
Plated
B17
Fax 1.262.786.3530 www.americanboltcorp.com
www.americanboltcorp.com 1.800.588.1200
Washers
C1
Fax 1.262.786.3530 www.americanboltcorp.com
USS Flat Washers
Materials Steel & Hardened Steel
Stainless Steel
Brass
Finishes Plain
Plated
Hot Dip Galv
C
C2
www.americanboltcorp.com 1.800.588.1200
SAE Flat Washers
Materials Steel
Stainless Steel
Brass
Finishes Plain
Plated
Hot Dip Galv
C
C3
Fax 1.262.786.3530 www.americanboltcorp.com
USS Hardened Washers
Materials Steel Through Hardened 38-45RC
Finishes Plain Hot Dip Galv
Plated
Diameter Wt. Per
Bolt Size Thickness
Outside Inside 100 Pieces
1/4 3/4 5/16 .051/.080 0.6
C 5/16 3/4 3/8 .064/.104 1.0
3/8 1 7/16 .064/.104 1.3
7/16 1-1/4 1/2 .064/.104 2.1
1/2 1-3/8 9/16 .097/.121 3.8
9/16 1-1/2 5/8 .097/.121 4.5
5/8 1-3/4 11/16 .108/.160 7.7
3/4 2 13/16 .122/.177 10.0
7/8 2-1/4 15/16 .136/.160 13.8
1 2-1/2 1-1/16 .136/.160 16.9
1-1/8 2-3/4 1-1/4 .136/.160 19.8
1-1/4 3 1-3/8 .136/.160 23.4
1-1/2 3-1/2 1-5/8 .136/.160 31.6
C4
www.americanboltcorp.com 1.800.588.1200
Direct Tension Indicator Washers
(ASTM F959) Materials A325
A490
Finishes Plain
Plated
Hot Dip Galv
Type 3 Weathering
Styles Standard C
Squirter
C5
Fax 1.262.786.3530 www.americanboltcorp.com
Stainless Steel Flat Washers
Materials 302/304 (18-8)
316
Specifications Standards
AN960C Army - Navy
MS15795 Military
NAS620c National Aerospace
C
Outside Inside
Size Thickness Specification
Diameter Diameter
# 000 1/11 1/25 .010
# 00 4/37 1/19 .015
.099 .063 .016 NAS 0
#0 5/32 1/16 .020
.187 .078 .020 MS-801
.149 .089 .016 NAS 2
7/32 3/32 .018
#2 .250 .099 .016 AN C2L
.250 .093 .020 MS-802
.250 .099 .031 AN C2
.180 .102 .016 NAS 3L
.180 .102 .032 NAS 3
#3 .250 .109 .016 AN C3L
.250 .109 .031 AN C3
1/4 7/64 .031
.209 .115 .016 NAS 4L
.209 .115 .032 NAS 4
.250 .125 .022 MS-803
#4 .312 .125 .016 AN C4L
.312 .125 .032 MS-804
.312 .125 .031 AN C4
5/16 1/8 .031
.238 .128 .016 NAS 5L
.238 .128 .032 NAS 5
#5
9/32 9/64 .025
.438 .140 .031 AN C5
C6
www.americanboltcorp.com 1.800.588.1200
Stainless Steel Flat Washers
Materials 302/304 (18-8)
316
Specifications Standards
AN960C Army - Navy
MS15795 Military
NAS620c National Aerospace
C
Outside Inside
Size Thickness Specification
Diameter Diameter
.267 .143 .016 NAS 6L
.267 .143 .032 NAS 6
.312 .156 .035 MS-805
#6 .375 .149 .016 AN C6L
.375 .149 .031 AN C6
3/8 5/32 .031
.375 .156 .049 MS-806
.304 .169 .016 NAS 8L
.304 .169 .032 NAS 8
.375 .174 .016 AN C8L
#8 .375 .174 .031 AN C8
3/8 11/64 .031
.375 .187 .049 MS-807
7/16 3/16 .049 SAE
.354 .195 .032 NAS 10L
.354 .195 .063 NAS 10
7/16 13/64 .031
.437 .203 .031 AN C10L
# 10
.437 .203 .062 AN C10
.437 .218 .049 MS-808
1/2 7/32 .062 SAE
.562 .250 .065 MS-809
# 12 9/16 .250 .050
.468 .255 .032 NAS 416L
.468 .255 .063 NAS 416
.500 .265 .031 AN C416L
.500 .265 .062 AN C416
1/4
.625 .281 .065 MS-810
5/8 9/32 .062 SAE
5/8 .281 .050
.750 .312 .065 MS-811
C7
Fax 1.262.786.3530 www.americanboltcorp.com
Stainless Steel Flat Washers
Materials 302/304 (18-8)
316
Specifications Standards
AN960C Army - Navy
MS15795 Military
NAS620c National Aerospace
C
Outside Inside
Size Thickness Specification
Diameter Diameter
.562 .328 .031 AN C516L
.562 .328 .062 AN C516
.687 .343 .065 MS-812
5/16
11/16 11/32 .062 SAE
3/4 .343 .050
.875 .375 .083 MS-813
.625 .390 .031 AN C616L
.625 .390 .062 AN C616
13/16 13/32 .062 SAE
3/8
.812 .406 .065 MS-814
1 .406 .050
1.00 .437 .083 MS-815
.750 .453 .032 AN C716L
.750 .456 .062 AN C716
7/16 .921 .468 .065 MS-816
1-1/8 .500 .062
1.25 .500 .084 MS-817
.875 .516 .031 AN C816L
.875 .516 .062 AN C816
1.062 .531 .095 MS-818
1/2
1-1/16 17/32 .093 SAE
1-1/4 .531 .078
1.375 .562 .109 MS-819
1.062 .578 .032 AN C916L
9/16 1.062 .578 .062 AN C916
1-3/8 .625 .078
C8
www.americanboltcorp.com 1.800.588.1200
Stainless Steel Flat Washers
Materials 302/304 (18-8)
316
Specifications Standards
AN960C Army - Navy
MS15795 Military
NAS620c National Aerospace
C
Outside Inside
Size Thickness Specification
Diameter Diameter
1.187 .641 .031 AN C1016L
1.187 .641 .062 AN C1016
1.312 .656 .095 MS-820
5/8
1-5/16 21/32 .093 SAE
1-1/2 .687 .078
1.750 .687 .134 MS-821
1.312 .766 .031 AN C1216L
1.312 .766 .093 AN C1216
1.500 .812 .134 MS-822
3/4
1-1/2 13/16 .125 SAE
1-7/8 .812 .109
2.00 .812 .148 MS-823
1.50 .890 .093 AN C1416
1.750 .937 .134 MS-824
7/8
2-1/4 15/16 .109
2.25 .937 .164 MS-825
1.75 1.016 .093 AN C1616
2.00 1.062 .134 MS-826
1 2 1-1/16 .125 SAE
2-1/2 1.062 .125
2.50 1.062 .164 MS-827
1-1/8 2-1/2 1.187 .125
1-1/4 2-3/4 1.312 .125
1-3/8 3-1/4 1.562 1.40
1-1/2 3-1/4 1-9/16 .140
1-3/4 3-1/2 1.812 .140
2 4 2.125 .187
C9
Fax 1.262.786.3530 www.americanboltcorp.com
Fender Washers
Materials Steel
Stainless Steel
Finishes Plain
Plated
C
Diameter Thickness Number
Weight
of Pieces
Bolt Size Per 1000
Outside Inside Gauge Inches Per
Pieces
Pound
3/16 7/32 1 18 3/64 10.4 96.2
3/16 7/32 1-1/4 18 3/64 16.5 60.6
1/4 9/32 1 18 3/64 10.0 100.0
1/4 9/32 1-1/4 18 3/64 16.2 61.7
1/4 9/32 1-1/2 18 3/64 23.7 42.2
5/16 11/32 1-1/4 18 3/64 15.7 63.7
5/16 11/32 1-1/2 18 3/64 23.2 43.1
3/8 13/32 1-1/2 18 3/64 22.7 44.1
3/8 27/64 1-5/8 16 1/16 36.0 27.8
1/2 17/32 2 16 1/16 54.0 13.5
Bevel Washer
Materials Malleable Iron
Structural
Stainless Steel
Finishes Plain Hot Dip Galv
Plated
High Low
Hole Wt. Per
Size Width Side Side
Diameter 100 Pcs
Height Height
1/4 11/16 7/32 5/64 5/16 2
5/16 1 5/16 9/64 3/8 6
3/8 1-1/4 11/32 5/32 7/16 9
1/2 1-1/4 11/32 5/32 9/16 9
5/8 1-1/2 13/32 5/32 11/16 13
3/4 1-1/2 15/32 7/32 13/16 15
7/8 2 9/16 7/32 15/16 34
1 2 9/16 7/32 1 3/32 31
1-1/8 2 9/16 7/32 1 3/16 30
1-1/4 2-1/2 23/32 5/16 1 11/32 69
C10
www.americanboltcorp.com 1.800.588.1200
Lock Washers
Materials Steel
Stainless Steel
Silicon Bronze
Finishes Plain
Plated
Styles L - Light EH - Extra Heavy
R - Regular (Medium) HC - High Collar C
H - Heavy
Metal Metal
Bolt Size Style
Width Thickness
L .030 .015
R .035 .020
#2 H .040 .025
EH .053 .027
HC .020 .020
L .035 .020
R .035 .040
#3
H .047 .031
EH .062 .034
L .035 .020
R .040 .025
#4 H .047 .031
EH .062 .034
HC .022 .022
L .040 .025
R .047 .031
#5 H .055 .040
EH .079 .045
HC .030 .030
L .040 .025
R .047 .031
#6 H .055 .040
EH .079 .045
HC .030 .030
L .047 .031
R .055 .040
#8 H .062 .047
EH .096 .057
HC .042 .047
For Technical Information see page L28
C11
Fax 1.262.786.3530 www.americanboltcorp.com
Lock Washers
Materials Steel
Stainless Steel
Silicon Bronze
Finishes Plain
Plated
Styles L - Light EH - Extra-Heavy
C R - Regular (Medium) HC - High Collar
H - Heavy
Metal Metal
Bolt Size Style
Width Thickness
L .056 .040
R .062 .047
# 10 H .070 .056
EH .112 .068
HC .042 .047
L .062 .047
R .070 .056
#12 H .077 .063
EH .130 .080
HC .047 .078
L .107 .047
R .109 .062
1/4 H .110 .077
EH .132 .084
HC .047 .078
L .117 .056
R .125 .078
5/16 H .130 .097
EH .143 .108
HC .062 .093
L .136 .070
R .141 .094
3/8 H .145 .115
EH .170 .123
HC .076 .125
C12
www.americanboltcorp.com 1.800.588.1200
Lock Washers
Materials Steel
Stainless Steel
Silicon Bronze
Finishes Plain
Plated
Styles L - Light EH - Extra Heavy
R - Regular (Medium) HC - High Collar C
H - Heavy
Metal Metal
Bolt Size Style
Width Thickness
L .154 .085
R .156 .109
7/16 H .160 .133
EH .186 .143
HC .090 .140
L .170 .099
R .171 .125
1/2 H .176 .151
EH .204 .162
HC .103 .172
L .186 .113
R .188 .141
9/16 H .193 .170
EH .223 .182
HC .116 .187
L .201 .126
R .203 .156
5/8 H .210 .189
EH .242 .202
HC .125 .203
L .233 .153
R .234 .188
3/4 H .244 .226
EH .279 .241
HC .154 .218
C13
Fax 1.262.786.3530 www.americanboltcorp.com
Lock Washers
Materials Steel
Stainless Steel
Silicon Bronze
Finishes Plain
Plated
Styles L - Light EH - Extra-Heavy
C R - Regular (Medium) HC - High Collar
H - Heavy
Metal Metal
Bolt Size Style
Width Thickness
L .264 .179
R .266 .219
7/8 H .281 .266
EH .322 .285
HC .182 .234
L .289 .202
R .297 .250
1 H .319 .306
EH .366 .330
HC .208 .250
L .314 .224
R .328 .281
1-1/8 H .356 .345
EH .411 .375
HC .236 .313
L .336 .244
R .359 .312
1-1/4 H .393 .384
EH .452 .417
HC .236 .313
L .356 .264
R .319 .344
1-3/8 H .427 .422
EH .491 .458
HC .292 .375
L .375 .282
R .422 .375
1-1/2 H .458 .458
EH .526 .496
HC .292 .375
For Technical Information see page L28
C14
www.americanboltcorp.com 1.800.588.1200
Tooth Lock Washers
Materials Steel
Stainless Steel (410)
Finishes Plain
Plated
Styles Internal
External
C
C15
Fax 1.262.786.3530 www.americanboltcorp.com
Tooth Lock Washers
Materials Steel
Stainless Steel (410)
Finishes Plain
Plated
Styles Combination
82 Degree
C
C16
www.americanboltcorp.com 1.800.588.1200
Screws
D1
Fax 1.262.786.3530 www.americanboltcorp.com
Machine Screws
Materials Steel
Stainless Steel
Brass
Finishes Plain
Plated
#4
1/2 0.79 1/2 1.39 1/2 2.30
9/16 0.87 9/16 1.51 9/16 2.49
5/8 0.94 5/8 1.63 5/8 2.67
3/4 1.09 3/4 1.87 3/4 3.05
7/8 1.24 7/8 2.11 7/8 3.42
-56 NC 1 1 2.35 1 3.79
1-1/8 2.59
#6
1/8 0.49 1-1/8 4.16
3/16 0.59 1-1/4 2.83 1-1/4 4.54
1/4 0.69 -40 NC 1-1/2 3.31 1-1/2 5.28
5/16 0.79 1/8 0.90 1-3/4 6.03
3/8 0.89 3/16 1.06 2 6.77
#3 7/16 0.99 1/4
5/16
1.22
1.37
2-1/4 7.08
1/2 1.09 2-1/2 7.92
9/16 1.19 3/8 1.53 2-3/4 9.02
5/8 1.29 7/16 1.69 3 9.43
3/4 1.49 1/2 1.85 3-1/4 10.60
#5
7/8 1.69 9/16 2.01 3-1/2 11.08
-48 NC 1 5/8 2.17 4 12.44
3/4 2.49 4-1/2 14.22
7/8 2.80 5 16.00
1 3.12 -32 NC 6 19.00
1-1/8 3.44
1-1/4 3.76
1-1/2 4.39
1-3/4 5.03
-40 NC 2 5.66
D5
Fax 1.262.786.3530 www.americanboltcorp.com
Tapping Screws
Materials Steel
Stainless Steel
Finishes Plain
Plated
Types A, AB, B
#4
5/8 1.21 5/8 2.82 3/4 6.03
3/4 1.46 3/4 3.48 7/8 7.00
#12
7/8 1.78 7/8 3.96 1 8.07
1 2.00 #8 1 4.53 1-1/4 9.91
1-1/4 2.42 1-1/4 5.56 1-1/2 11.84
1/4 1.27 1-1/2 6.95 1-3/4 13.80
3/8 1.33 1-3/4 8.14 2 15.88
1/2 1.66 2 9.18 2-1/2 19.42
5/8 1.97 2-1/2 11.81 3 23.08
3/4 2.41 3 13.48 1/2 5.40
#6 7/8 2.75 5/16 2.32 5/8 6.23
1 3.10 3/8 2.51 3/4 7.94
1-1/4 3.22 1/2 3.28 7/8 9.10
1-1/2 3.90 5/8 4.10 1 10.11
1-3/4
2
4.55
5.12
3/4
7/8
4.70
5.30
#14 1-1/4
1-1/2
12.78
15.37
3/8
1/2
1.63
1.95
#10 1 6.14 1-3/4 17.34
1-1/4 7.64 2 20.21
5/8 2.46 1-1/2 9.24 2-1/2 24.51
#7
3/4 2.94 1-3/4 10.71 3 29.40
7/8 3.28 2 11.88
1 3.75 2-1/2 14.91
1-1/4 4.63 3 18.39
1-1/2 5.59
D7
Fax 1.262.786.3530 www.americanboltcorp.com
Drive Screws
Materials Steel
Stainless Steel
Finishes Plain
Plated
Type U
D Recommended
Number
Recommended
Number
Hole Size Hole Size
Diameter Length Thread Diameter Length Thread
Drill Drill
Diameter Starts Diameter Starts
Size Size
1/8 5/16
#00 3/16 55 0.052 6 #7 3/8 29 0.136 8
1/4 1/2
1/8 3/8
#0
3/16
51 0.067 6 #8 1/2 27 0.144 8
1/4 5/8
3/8 3/8
1/8 #10 1/2 20 0.161 8
3/16 5/8
#2 1/4 44 0.086 8 1/2
5/16 #12 5/8 11 0.191 8
3/8 3/4
1/8 1/2
3/16 #14 5/8 2 0.221 9
#4 1/4 37 0.104 7 3/4
5/16
3/8
1/4
#6 5/16 31 0.120 7
3/8
D8
www.americanboltcorp.com 1.800.588.1200
Self Drilling (Tek) Screws
Materials Steel
Stainless Steel
Finishes Black
Plated
Climaseal
Points #2,3,4,5
Head Syles
Hex Washer Slotted Hex Washer
Phil Pan Phil Round Washer K-Lath Mod Truss
Phil Flat Phil Wafer
Phil Oval Torx Wafer
D9
Fax 1.262.786.3530 www.americanboltcorp.com
Security Screws
Materials Steel
Stainless Steel
Finishes Plain
Plated
Head Styles
Thread Styles
Tamper-resistant screws comply to the same
thread size and length as standard screws and
use the same nomenclature.
Matching Tools
All screws with the exception of One-Ways,
require special matching tools for easy inser-
tion and removal.
D10
www.americanboltcorp.com 1.800.588.1200
Metric
Metric Hex Head Cap Screws 2-5
Metric Nuts 6
Metric Prevailing Torque Nuts 7
Metric Nylon Lock Nuts 8
Metric Flat Washers 9
Metric Lock Washers 10
Metric Socket Head Cap Screws 11-14
Metric Socket Set Screws 15
Metric Retaining Rings 16
Metric Machine Screws 17
E1
Fax 1.262.786.3530 www.americanboltcorp.com
Metric Hex Head Cap Screws
Materials Grades 8.8, 10.9
Stainless Steel
Brass
DIN 933 - Full Thread
931 - Partial Thread
Finishes Plain
Plated
E2
www.americanboltcorp.com 1.800.588.1200
Metric Hex Head Cap Screws
Materials Grades 8.8, 10.9
Stainless Steel
Brass
DIN 933 - Full Thread
931 - Partial Thread
Finishes Plain
Plated
E3
Fax 1.262.786.3530 www.americanboltcorp.com
Metric Hex Head Cap Screws
Materials Grades 8.8, 10.9
Stainless Steel
Brass
DIN 933 - Full Thread
931 - Partial Thread
Finishes Plain
Plated
E4
www.americanboltcorp.com 1.800.588.1200
Metric Hex Head Cap Screws
Materials Grades 8.8, 10.9
Stainless Steel
Brass
DIN 933 - Full Thread
931 - Partial Thread
Finishes Plain
Plated
M20
75 39.30 90 70.80 M30 80 140
80 41.20 -2.5 100 76.30 90 151
90 44.80 40 53.80 100 161
100 48.30 45 57.10 120 182
110 57.30 50 60.40 -3.5 140 203
120 61.70 55 63.70 60 152
130 65.00 60 67.00 70 164
140 69.50 65 70.30
M33 80 178
150 73.90 70 73.60 90 191
160 78.30
M24 75 76.70 -3.5 100 203
180 87.10 80 80.00 60 190
-2.5 200 95.60 90 86.70 70 205
100 93.30 80 221
110 107
M36 90 236
120 110 100 254
130 123 120 280
-3.0 140 130 -4.0 140 311
E5
Fax 1.262.786.3530 www.americanboltcorp.com
Metric Hex Nuts
Materials Class 8, 10
Stainless Steel
Brass
DIN 934
Finishes Plain
Plated
E6
www.americanboltcorp.com 1.800.588.1200
Metric Nylon Insert Lock Nuts
Materials Class 8
Stainless Steel
DIN 980N
Finishes Plain
Plated
Pitch Width
Nut Size Thickness
(Coarse) Across Flats
M2.5 .45 5 3.8 E
M2.6 .45 5 3.8
M3 .50 5.5 4
M3.5 .60 6 4.5
M4 .70 7 5
M5 .80 8 5
M6 1.00 10 6
M8 1.25 13 8
M10 1.50 17 10
M12 1.75 19 12
M14 2.00 22 14
M16 2.00 24 16
M18 2.50 27 18.5
M20 2.50 30 20
M22 2.50 32 22
M24 3.00 36 24
M27 3.00 41 27
M30 3.50 46 30
M33 3.50 50 33
M36 4.00 55 36
M39 4.00 60 39
M42 4.50 65 42
M45 4.50 70 45
M48 5.00 75 48
E7
Fax 1.262.786.3530 www.americanboltcorp.com
Metric Prevailing Torque Lock Nuts
Materials Class 8, 10
Stainless Steel
DIN 980V
Finishes Plain
Plated
E Nut Size
Pitch Width
Thickness
Wt. Per 100
(Coarse) Across Flats pcs (lbs.)
M3 .50 5.5 4.0 0.11
M4 .70 7.0 4.2 0.22
M5 .80 8.0 5.1 0.31
M6 1.00 10.0 6.0 0.53
M8 1.25 13.0 8.0 1.12
M10 1.50 17.0 10.0 2.34
M12 1.75 19.0 12.0 3.79
M14 2.00 22.0 14.0 5.73
M16 2.00 24.0 16.0 7.50
M18 2.50 27.0 14.0 9.92
M20 2.50 30.0 15.4 14.30
M22 2.50 32.0 16.9 16.50
M24 3.00 36.0 18.5 22.10
E8
www.americanboltcorp.com 1.800.588.1200
Metric Flat Washers
Materials Steel
Stainless Steel
Brass
DIN 125A
Finishes Plain
Plated
E9
Fax 1.262.786.3530 www.americanboltcorp.com
Metric LockWashers
Materials Steel
Stainless Steel
Bronze
DIN 127B
Finishes Plain
Plated
E10
www.americanboltcorp.com 1.800.588.1200
Metric Socket Head Cap Screws
Materials Steel
Stainless Steel
Finishes Plain
Plated
E11
Fax 1.262.786.3530 www.americanboltcorp.com
Metric Socket Head Cap Screws
Materials Steel
Stainless Steel
Finishes Plain
Plated
E12
www.americanboltcorp.com 1.800.588.1200
Metric Socket Head Cap Screws
Materials Steel
Stainless Steel
Finishes Plain
Plated
M16
80 110 M20 110
90 120 120
100
M18 130 130
110 140 140
120 160 160
130 180 180
140 85 200
150 90 220
160 100 240
180 110 260
200 120 300
220 130 160
240 140 180
260 150 200
300 160
170
180
E13
Fax 1.262.786.3530 www.americanboltcorp.com
Metric Socket Head Cap Screws
Materials Steel
Stainless Steel
Finishes Plain
Plated
E14
www.americanboltcorp.com 1.800.588.1200
Metric Socket Set Screws
Materials Class 8, 10
Stainless Steel
DIN 980V
Finishes Plain
Plated
E15
Fax 1.262.786.3530 www.americanboltcorp.com
Metric Retaining Rings
Materials Steel
Finishes Plain
DIN 6799 (Type E)
471 (External)
472 (Internal)
Type E Internal External
DIN 471
Size Thickness
3 0.4
DIN 472
4 0.4
Size Thickness
5 0.6
8 0.8
E 6 0.7
9 0.8
DIN 6799 7 0.8
10 1
Size Thickness 8 0.8
11 1
0.8 0.2 9 1
12 1
1.2 0.3 10 1
13 1
1.5 0.4 11 1
14 1
1.9 0.5 12 1
15 1
2.3 0.6 13 1
16 1
3.2 0.7 14 1
17 1
4 0.7 15 1
18 1
5 0.7 16 1
19 1
6 0.7 17 1
20 1
7 0.9 18 1.2
21 1
8 1 19 1.2
22 1
9 1.1 20 1.2
24 1.2
10 1.2 21 1.2
25 1.2
12 1.3 22 1.2
26 1.2
15 1.5 23 1.2
28 1.2
19 1.75 24 1.2
30 1.2
24 2 25 1.2
32 1.2
30 2.5 26 1.2
36 1.5
28 1.5
38 1.5
30 1.5
40 1.75
32 1.5
42 1.75
36 1.75
48 2
38 1.75
40 1.75
48 1.75
E16
www.americanboltcorp.com 1.800.588.1200
Metric Machine Screws
Materials Steel
Stainless Steel
Brass
Finishes Plain
Plated
E
Diameter
Din Style Length Range
Ranger
84A Slotted Cheese Head M1.6-M10 2MM-100MM
85A Slotted Pan Head M2.5-M10 3MM-80MM
963A Slotted Flat Head M1.6-M8 2MM-100MM
965A Phillips Flat Head M2.0-M8 4MM-60MM
7985 Phillips Pan Head M2.0-M10 3MM-60MM
E17
Fax 1.262.786.3530 www.americanboltcorp.com
www.americanboltcorp.com 1.800.588.1200
Pins, Keys, Rings
Cotter Pins 2-3
Spring Pins 4-6
Taper Pins 7-8
Dowel Pins/Pull Dowel Pins 9-10
Woodruff Keys 11
Key Stock 12
Retaining Rings 13
Hitch Pins 14-15
F1
Fax 1.262.786.3530 www.americanboltcorp.com
Cotter Pins
Materials Steel
Stainless Steel
Brass
Finishes Plain
Plated
F2
www.americanboltcorp.com 1.800.588.1200
Cotter Pins
Materials Steel
Stainless Steel
Brass
Finishes Plain
Plated
5/16
2-1/4 55.60 4 253.00 F
2-1/2 59.40 5 303.00
3 67.70 6 348.00
3-1/2 76.50
4 83.80
5 102.90
6 120.00
1-1/2 63.20
1-3/4 68.00
2 73.60
2-1/4 79.00
2-1/2 86.50
3/8 3 104.10
3-1/2 112.30
4 124.20
5 152.40
6 167.50
5 60.00
F3
Fax 1.262.786.3530 www.americanboltcorp.com
Spring Pins
Materials Steel
Stainless Steel (420)
Finishes Plain
Plated
F4
www.americanboltcorp.com 1.800.588.1200
Spring Pins
Materials Steel
Stainless Steel (420)
Finishes Plain
Plated
F5
Fax 1.262.786.3530 www.americanboltcorp.com
Spring Pins
Materials Steel
Stainless Steel (420)
Finishes Plain
Plated
F6
www.americanboltcorp.com 1.800.588.1200
Taper Pins
Materials Steel
Stainless Steel
Finishes Plain
Diameter
Length # 7/0 # 6/0 # 5/0 # 4/0 # 3/0 # 2/0 #0 #1 #2
0.062 0.078 0.094 0.109 0.125 0.141 0.156 0.172 0.193
3/8 X X - - - - - - -
7/16 - X - - - - - - -
1/2 X X X X X X - - -
5/8 X X X X X X - - - F
3/4 X X X X X X X X -
7/8 - - - X - X X X X
1 X X X X X X X X X
1-1/4 - - X X X X X X X
1-1/2 - X X X X X X X X
1-3/4 - - - - - X X X X
2 - - - - X X X X X
2-1/4 - - - - - X X X X
2-1/2 - - - - - X X X X
2-3/4 - - - - - - - - X
3 - - - - - X X X X
3-1/2 - - - - - - - - X
F7
Fax 1.262.786.3530 www.americanboltcorp.com
Taper Pins
Materials Steel
Stainless Steel
Finishes Plain
Diameter
Length #3 #4 #5 #6 #7 #8 #9 # 10
0.219 0.250 0.289 0.341 0.409 0.492 0.591 0.706
3/4 X X X X - - - -
1 X X X X - - - -
1-1/4 X X X X X X - -
1-1/2 X X X X X X - -
F 1-3/4 X X X X X X - -
2 X X X X X X X -
2-1/4 X X X X X X X -
2-1/2 X X X X X X X X
2-3/4 X X X X X X - -
3 X X X X X X X X
3-1/4 - - X X X X - -
3-1/2 X X X X X X X X
3-3/4 - - X X X X - -
4 X X X X X X X X
4-1/2 - - - X X X X X
5 - - X X X X X X
5-1/2 - - - - - X X X
6 - - X X X X X X
F8
www.americanboltcorp.com 1.800.588.1200
Dowel Pins / PuLL Dowel Pins
Materials Alloy Steel
Stainless Steel
F9
Fax 1.262.786.3530 www.americanboltcorp.com
Dowel Pins / PuLL Dowel Pins
Materials Steel
Stainless Steel
Finishes Plain
Diameter Length Wt. Per Diameter Length Wt. Per Diameter Length Wt. Per
100 Pcs 100 Pcs 100 Pcs
3/4 0.8 2 2.5 2 4.5
1 1.1 2-1/2 3.2 2-1/2 5.6
1-1/4 1.4 3 3.8 3 6.7
1-1/2 1.7 3-1/2 3.8 3-1/2 7.9
1-3/4 2.0
3/4 4 5.1
1 4 9.0
1/2 2 2.2 4-1/2 5.6 4-1/2 10.0
2-1/4 2.5 5 6.4 5 11.2
F 2-1/2 2.8 6 7.7 6 13.5
3 3.4 2 3.5
3-1/2 3.9 2-1/2 4.4
4 4.6 3 5.3
1 0.9 3-1/2 6.0
1-1/4 1.1
7/8 4 7.0
1-1/2 1.3 4-1/2 7.9
1-3/4 1.5 5 8.7
2 1.8 6 10.0
2-1/4 2.0
5/8 2-1/2 2.2
3 2.7
3-1/2 3.1
4 3.6
4-1/2 4.0
5 4.4
F10
www.americanboltcorp.com 1.800.588.1200
Woodruff Keys
Materials Alloy Steel
Carbon Steel
Finishes Plain
F11
Fax 1.262.786.3530 www.americanboltcorp.com
Key Stock
Materials Low Carbon Steel
Stainless Steel
Finishes Plain
Plated
Styles Oversize (+)
Undersize (-)
*Metric sizes, Step Keys, & Gib Keys available upon request
F12
www.americanboltcorp.com 1.800.588.1200
Internal (HO)
Ring Application
External (SH)
Ring Application
Retaining Rings
Number Diameter Number Diameter Styles Internal
25 .250 25 .250 External
28 .281 28 .281 Type E
31 .312 31 .312
34 .344 34 .344
37 .375 37 .375
40 .406 40 .406
43 .438 43 .438 External
Internal
50 .500 50 .500
56 .562 56 .562
59 .594 59 .594 Type E
62 .625 62 .625 Ring Application
Number Diameter
68 .688 68 .688
4 .026
75 .750 75 .750
6 .062
81 .812 81 .812
9 .094
87 .875 87 .875
12 .125
93 .938 93 .938
14 .140
100 1.000 100 1.000
15 .156
106 1.062 106 1.062
17 .172 F
112 1.125 112 1.125
18 .188
118 1.188 118 1.188
21 .219
125 1.250 125 1.250
25 .250
131 1.312 131 1.312
31 .312
137 1.375 137 1.375
37 .375
143 1.438 143 1.438
43 .438
150 1.500 150 1.500
50 .500
156 1.562 156 1.562
62 .625
162 1.625 162 1.625
74 .750
168 1.688 168 1.688
87 .875
175 1.750 175 1.750
98 .984
181 1.812 181 1.812
118 1.188
187 1.875 187 1.875
200 2.000 200 2.000
206 2.062 206 2.062
212 2.125 212 2.125
225 2.250 225 2.250 Type E
231 2.312 231 2.312
237 2.375 237 2.375
243 2.438 243 2.438
250 2.500 250 2.500
262 2.625 262 2.625
268 2.688 268 2.688
275 2.750 275 2.750
287 2.875 287 2.875 For Technical Information see pages L54-L56
300 3.000 300 3.000
F13
Fax 1.262.786.3530 www.americanboltcorp.com
Hitch Pins
Materials Steel
Finish Plain
Zinc
F14
www.americanboltcorp.com 1.800.588.1200
Hitch Pins
Materials Steel
Wire Drill Min Max Overall Part # Finishes Plain
Dia Hole Shaft Shaft Length Zinc
Size Dia Dia
.125 9/64 1/2 1-9/16 1-9/16 215
.125 9/64 1/2 1-15/16 1-15/16 216
.125 9/64 7/16 2-9/16 2-9/16 211
.125 9/64 5/8 2-1/2 2-1/2 227
.125 9/64 3/4 2-7/8 2-7/8 238
.125 9/64 3/4 3-1/8 3-1/8 202
.148 5/32 1/2x5/8 5/8x1 3 201
.148 5/32 3/4 1-1/8 3-5/16 209
.148 5/32 5/8 1 2-15/16 210
.162 3/16 7/8 1-1/16 2-3/16 205
.162 3/16 1/2x3/4 5/8x1 3 204
.162 11/64 1/2x1 7/8x1 3-7/16 212
F15
Fax 1.262.786.3530 www.americanboltcorp.com
www.americanboltcorp.com 1.800.588.1200
Pipe Fittings
Hex Bushings 2
Socket Pipe Plugs 3
Straight and Reducing Couplings 4
Elbows and Street Ells 5
Tees & Crosses 6
Caps, Plugs, Unions 7
Nipples 8
Hose Clamps 9
O-Rings 10-13
Inverted Flare Fittings 14
SAE 45° Flare Fittings 14
Hose Barbs 15
JIC 37° Flare Fittings 15-16
Grease Fittings 17
Red Air & General Purpose Hose 18
G1
Fax 1.262.786.3530 www.americanboltcorp.com
Hex Bushings
Material Malleable Iron
Stainless Steel
Brass
Finishes Plain
Hot-Dipped Galvanized
G2
www.americanboltcorp.com 1.800.588.1200
Hex Socket Pipe Plugs
Material Malleable Iron
Stainless Steel
Brass
Finishes Plain
Hot-Dipped Galvanized
G
Brass 3/4" Taper Stainless 3/4" Taper
Threads Threads
Wt. Per Wt. Per
Size Per Inch Key Size Size Per Inch Key Size
100 Pcs 100 Pcs
NPTF NPTF
1/16 27 0.4 5/32 1/16 27 0.4 5/32
1/8 27 1.0 3/16 1/8 27 0.6 3/16
1/4 18 1.9 1/4 1/4 18 1.6 1/4
3/8 18 3.7 5/16
1/2 14 6.2 3/8
G3
Fax 1.262.786.3530 www.americanboltcorp.com
Straight & Reducing Couplings
Material Malleable Iron
Stainless Steel
Brass
Finishes Plain
Hot-Dipped Galvanized
G4
www.americanboltcorp.com 1.800.588.1200
90° 45° Elbows & Street Ells
Material Malleable Iron
Stainless Steel
Brass
Finishes Plain
Hot-Dipped Galvanized
90° ELBOWS 90° ELBOWS 45° ELBOWS 90° STREET 45° STREET
1/8 2 x 1/2 1/8 ELLS ELLS
1/4 2 x 3/4 1/4 1/8 1/8
3/8 2 x 1/2 3/8 1/4 1/4
1/2 2 x 1-1/4 1/2 3/8 3/8
3/4 2 x 1-1/2 3/4 1/2 1/2
1 2-1/2 x 1-1/2 1 3/4 3/4
1-1/4 2-1/2 x 2 1-1/4 1 1
1-1/2 3x2 1-1/2 1-1/4 1-1/4
2 2 1-1/2 1-1/2
2-1/2 2-1/2 2 2
3 3 2-1/2
4 4 3
1/4 x 1/8 1-1/2 x 1-1/4 G
3/8 x 1/4
1/2 x 1/4
1/2 x 3/8
3/4 x 3/8
3/4 x 1/2
1 x 3/8
1 x 1/2
1 x 3/4
1-1/4 x 1/2
1-1/4 x 3/4
1-1/4 x 1
1-1/2 x 1/2
1-1/2 x 3/4
1-1/2 x 1/2
1-1/2 x 3/4
1-1/2 x 1
1-1/2 x 1-1/4
G5
Fax 1.262.786.3530 www.americanboltcorp.com
tees & Crosses
Material Malleable Iron
Stainless Steel
Brass
Finishes Plain
Hot-Dipped Galvanized
G6
www.americanboltcorp.com 1.800.588.1200
Caps, Plugs, Unions
Material Malleable Iron
Stainless Steel
Brass
Finishes Plain
Hot-Dipped Galvanized
G7
Fax 1.262.786.3530 www.americanboltcorp.com
Nipples
Material Malleable Iron
Sch. 40 & 80
Stainless Steel
Brass
Finishes Plain
Hot-Dipped Galvanized
G8
www.americanboltcorp.com 1.800.588.1200
Hose Clamps Worm Gear Drive
Material Stainless Steel Band/Zinc Plated
Screw and Housing
All Stainless Steel - Marine Grade
Band Width Miniature = 5/16”
Regular = 1/2”
Clamp Range
Number
Mini Min Min Max
4 1/4 --- 5/8
6 5/16 3/8 7/8
8 3/8 7/16 1
10 3/8 1/2 1-1/16
12 1/2 1/2 1-1/4
16 1/2 11/16 1-1/2
20 3/4 3/4 1-3/4
24 1 1 2
28 1-1/4 1-1/4 2-1/4
32 1-1/2 1-1/2 2-1/2
36 1-3/4 1-3/4 2-3/4
G
40 --- 2 3
44 2-1/4 2-1/4 3-1/4
48 2-1/2 2-1/2 3-1/2
52 --- 2-3/4 3-3/4
56 --- 3 4
60 --- 3-1/4 4-1/4
64 --- 2-1/2 4-1/2
72 --- 3 5
80 --- 3-1/2 5-1/2
88 --- 4 6
96 --- 4-1/2 6-1/2
104 --- 5 7
G9
Fax 1.262.786.3530 www.americanboltcorp.com
O Rings
Material Buna 70, 90
Viton
G10
www.americanboltcorp.com 1.800.588.1200
O Rings
Material Buna 70, 90
Viton
G11
Fax 1.262.786.3530 www.americanboltcorp.com
O Rings
Material Buna 70, 90
Viton
G12
www.americanboltcorp.com 1.800.588.1200
O Rings
Material Buna 70, 90
Viton
G13
Fax 1.262.786.3530 www.americanboltcorp.com
Fittings
Inverted Flare
G14
www.americanboltcorp.com 1.800.588.1200
Fittings
Hose Barbs
G15
Fax 1.262.786.3530 www.americanboltcorp.com
Fittings
G16
www.americanboltcorp.com 1.800.588.1200
Grease Fittings
Straight
45°
Thread Types
1/4-28 SAE
UNF 1/4-28
5/16-24
3/8-24
American Pipe 1/8-27
65° 1/4-18
BSP 1/8-28
1/4-19
BSF 1/4-26
5/16-22 G
Metric M6-1
M8-1.5
90° M8-1
M10-1.5
M10-1
Drive
Thread Forming
Straight
Button Head
G17
Fax 1.262.786.3530 www.americanboltcorp.com
Red Air & General Purpose Hose
Tube Medium oil resistant
Reinforcement Multiple braids of cord
Cover Red abrasion resistant EPDM blend
Temperature -40° to +180°
G18
www.americanboltcorp.com 1.800.588.1200
Cutting Tools
Dies 2
Taps 3
Jobber Drill Bits 4
Burrs 5
Concrete & Masonry Bits 6-7
Steel Cutting Tools 8
H1
Fax 1.262.786.3530 www.americanboltcorp.com
Dies
Types Hexagon
Adjustable Round
H2
www.americanboltcorp.com 1.800.588.1200
Taps
Taper taps 7 to 10 threads has the longest standard chamfer insuring easier starting
Plug taps 3 to 5 threads has the most common chamfer, and are used in through or blind holes
Bottoming taps 1 to 2 threads are used for threading close to the bottom of a blind hole
H3
Fax 1.262.786.3530 www.americanboltcorp.com
Jobber Drill bits
Blitz Bits Heavy Duty M-42 Cobalt Bits 135° Split Point
3 Flat Shank Design
135° Split Point General Purpose 118° Point
Also Available: Parabolic Flutes
Mechanic’s Lenghts
Metric Sizes
3/8” & 1/2” Shank
Screw Machine Length
H4
www.americanboltcorp.com 1.800.588.1200
Carbide Burrs
1/4” Shank - Right Hand Cut
Single & Double Cut
1/8 - 1” Head Diameter available
Cylindrical
Flame
Oval
Inverted Cone
90° Cone
60° Cone
Ball
H5
Fax 1.262.786.3530 www.americanboltcorp.com
Carbide Drill Bits
For Concrete & Masonry
SDS-PLUS® Shank
H6
www.americanboltcorp.com 1.800.588.1200
Carbide Drill Bits
For Concrete & Masonry
SDS-MAX®
H7
Fax 1.262.786.3530 www.americanboltcorp.com
Evolution Cutting Tools
Steel Cutting Tools
H8
www.americanboltcorp.com 1.800.588.1200
Construction
Wedge Concrete Anchor 2
Sleeve Concrete Anchor 3
Titen HD Contrete Anchor 4
Tapcon Masonry Screw Anchor 5
Acrylic Tie Adhesive 6
Epoxy Tie Adhesive 7
Simpson Application Guide 8-9
Metal Framing Channel (Strut) 10
Metal Framing Channel Accessories 10
Hydra-Zorb Channel 11
Hydra-Zorb Cushion Clamps 11
Weld Nuts 12
Bent Anchor Bolts 13
Clevises 14
Turnbuckles 15
Weld Studs 16-18
I1
Fax 1.262.786.3530 www.americanboltcorp.com
Wedge Concrete Anchor
Materials Steel
Stainless Steel
Finishes Zinc
Mechanically Galvanized
I2
www.americanboltcorp.com 1.800.588.1200
Sleeve concrete Anchor
Materials Steel
Stainless Steel
Finishes Zinc
Styles Acorn, Hex
Phillips Flat, Slotted Round
I3
Fax 1.262.786.3530 www.americanboltcorp.com
Titen HD® Concrete Anchor
Materials Carbon Steel
Finishes Zinc
Mechanically Galvanized
I4
www.americanboltcorp.com 1.800.588.1200
Masonry Screw Anchor
Materials Carbon Steel
Finishes Zinc w/ Baked on Ceramic Coating
Styles Hex Head
Phillips Flat
Drill Bits
I
Use With
Size
Screw Length
5/32 x 3-1/2 to 1-3/4
5/32 x 4-1/2 3/16 dia to 3-1/4
5/32 x 5-1/2 to 4
3/16 x 3-1/2 to 1-3/4
3/16 x 4-1/2 1/4 dia to 3-1/4
3/16 x 5-1/2 to 4
I5
Fax 1.262.786.3530 www.americanboltcorp.com
Acrylic Tie Adhesive
AT - High Strength Acrylic-Tie®
I6
www.americanboltcorp.com 1.800.588.1200
Epoxy Tie Adhesive
ET - Epoxy-Tie®
SET - High Strength Epoxy-Tie®
ET Cartridge Systems
Capacity Cartridge
Model No. Dispensing Tool Mixing Nozzle
Ounces Type
EDT22B, EDT22AP, or
ET22 22 side-by-side EMN22i
EDT22CKT
EMN22i or
ET56 56 side-by-side EDT56AP
EMN50
I7
Fax 1.262.786.3530 www.americanboltcorp.com
Simpson Anchors
I8
www.americanboltcorp.com 1.800.588.1200
*Simpson catalog available upon request
I9
Fax 1.262.786.3530 www.americanboltcorp.com
Metal Framing Channel (Strut)
Materials Steel
Finishes Galvanized
Green
Styles Solid
Holes
Holes Elongated Holes Slots
Elongated Holes
Slots
Width Height
10 & 12 Foot Standard Lengths
1-5/8 1-5/8
*Cut to specific length available
1-5/8 7/8
Other dimensions available
Strut Nuts
Materials Steel
Sizes Finishes Zinc
#10 - 24 Styles Without Spring
1/4 - 20 With Spring
Available with stud
5/16 - 18
3/8 - 16
1/2 - 13
5/8 - 11
3/4 - 10
Beam Clamps
Materials Malleable Iron
Stainless Steel
Finishes Plain Rod Size
Hot Dip Galv 1/4
Zinc 3/8
Styles #300 1/2
I Wide Mouth 5/8
C Lamp 3/4
7/8
StruT Accessories
Brackets
Pipe
Fittings
I10
www.americanboltcorp.com 1.800.588.1200
Hydra-Zorb channel
I11
Fax 1.262.786.3530 www.americanboltcorp.com
Weld Nuts
Materials Steel, Stainless Steel
Standard & Metric Size Available
I12
www.americanboltcorp.com 1.800.588.1200
Bent Anchor Bolts
Materials Low Carbon Steel
Stainless Steel
Finishes Plain
Hot Dip Galvanized
I13
Fax 1.262.786.3530 www.americanboltcorp.com
clevises
Materials Steel
Stainless Steel
Finish Self Colored
Zinc
Galvanized
Rated Unit.
Thrd. Pin
Clevis No. D N W T A Capacity Wt.
Max U Max P
(Lbs.) (Lbs.)
2 1-7/16 5/8 5/8 1-1/16 5/16 3-9/16 3/4 3,500 1
2-1/2 2-1/2 1 7/8 1-1/4 5/16 4 1-1/2 7,500 2-1/2
3 3 1-1/4 1-3/8 1-1/2 1/2 5-11/16 1-3/4 15,000 4
I 3-1/2 3-1/2 1-1/2 1-1/2 1-3/4 1/2 6 2 18,000 6
4 4 1-3/4 1-3/4 2 1/2 5-15/16 2-1/4 21,000 9
5 5 2-1/4 2-1/8 2-1/2 5/8 7 2-1/2 37,500 16
6 6 2-3/4 2-1/2 3 3/4 8 3 54,000 23
7 7 3 3 3-1/2 7/8 9 3-3/4 68,500 36
8 8 4 4 4 1-1/2 10 4-1/4 135,000 90
I14
www.americanboltcorp.com 1.800.588.1200
TurnBuckles
Materials Steel
Stainless Steel
Thread Finishes Self Colored
Body Length Rated Unit Zinc
Diameter Take Up Nut End
(Inches) Capacity Weight
(Inches) T
L
B
(Lbs.) (Lbs.)
Galvanized
A
3/8 6 7-1/8 9/16 1,200 .42
3 4-7/8 15/16 2,200 .56
4 5-9/16 25/32 2,200 .65
1/2 6 7-9/16 25/32 2,200 .85
9 10-9/16 25/32 2,200 .90
12 13-9/16 25/32 2,200 1.20
3 4-7/8 15/16 3,500 .56
4 5-7/8 15/16 3,500 .82
5/8 6 7-7/8 15/16 3,500 .98
9 10-7/8 15/16 3,500 1.84
12 13-7/8 15/16 3,500 2.35
6 8-1/8 1-1/16 5,200 1.45
3/4 9 11-1/8 1-1/16 5,200 1.84
12 14-1/8 1-1/16 5,200 2.35
6 8-5/8 1-5/16 7,200 1.85
7/8
12 14-7/8 1-7/16 7,200 4.00
1 6 8-7/8 1-7/16 9,300 2.60
12 14-7/8 1-7/16 9,300 4.02
6 9-1/8 1-9/16 11,600 4.06
1-1/8
12 15-1/8 1-9/16 15,200 9.74
6 9-1/8 1-9/16 15,200 4.00
1-1/4
12 15-1/8 1-9/16 15,200 9.74
6 9-5/8 1-13/16 17,400 6.15
1-3/8
12 15-3/4 1-7/8 17,400 9.70
6 9-3/4 1-7/8 21,000 6.15
1-1/2
12 15-3/4 1-7/8 21,000 9.74
6 11 2-1/2 24,500 9.80
I
1-5/8
12 17-1/2 2-3/4 26,000 15.25
6 11 2-1/2 28,000 9.80
1-3/4
12 17 2-1/2 28,000 15.25
6 11-5/8 2-13/16 37,000 14.00
1-7/8
12 17-1/2 2-3/4 37,000 15.25
6 11-5/8 2-13/16 37,000 14.00
2
12 17-1/2 2-3/4 37,000 15.25
6 12-5/8 3-5/16 48,000 19.60
2-1/4
12 19-5/8 3-13/16 48,000 30.92
2-3/8 6 13-1/2 3-3/4 52,000 23.25
6 13-1/2 3-3/4 60,000 23.25
2-1/2
12 19-1/2 3-3/4 60,000 30.92
*Double Ended Studs Available, quoted per print
I15
Fax 1.262.786.3530 www.americanboltcorp.com
Weld Studs
Materials Low Carbon Steel
Stainless Steel
4-1/8
1-3/8
1-5/8
2-1/8
2-5/8
3/8 3-1/8
100101099
4-1/8
5-1/8
6-1/8
2-1/8
2-5/8
3-1/8
3-5/8
1/2 4-1/8
100101114
5-5/16
6-1/8
I 8-1/8
1-7/16
2-11/16
3-3/16
4-3/16
5/8 5-3/16 100101187
6-3/16
6-9/16
8-3/16
10-3/16
I16
www.americanboltcorp.com 1.800.588.1200
Weld studs
Materials Low Carbon Steel
Stainless Steel
D 3/4 7/8 1
A .375 .375 .500
H 1.25 1.375 1.625
Shear Connectors
Diameter Length Ferrule
2-3/16
3-3/16
3-3/8
3-7/8
4-3/16
4-3/8
4-7/8
5-3/16
3/4 5-3/8
100101152
5-7/8
6-3/16
7-3/16
8-3/16
9-3/16
10-3/16
12-3/16
3-11/16
4-3/16
5-3/16
6-3/16 I
7-3/16
7/8 8-3/16
100101140
9-3/16
10-1/32
12-3/16
14-3/16
4-1/4
1 6-1/4 100101045
8-1/4
I17
Fax 1.262.786.3530 www.americanboltcorp.com
Weld Stud Tools
I18
www.americanboltcorp.com 1.800.588.1200
Chain & Wire Products
Chain 2
Drop Forged Chain Hooks 3
Drop Forged Chain Shackles 3
Drop Forged Anchor Shackles 4
Machinery Eye Bolts 5
Drop Forged Lifting Eyes 6
Drop Forged Eye Nuts 6
Malleable Wire Rope Clamps 7
Wire Rope Thimbles 7
S-Hooks 8
U-Bolts 9
Turned Eye Bolts 10-11
Turned Eye Lag Bolts 11
J1
Fax 1.262.786.3530 www.americanboltcorp.com
Chain
Columbus McKinnon
Grade 30 Grade 43
J2
www.americanboltcorp.com 1.800.588.1200
Drop Forged Chain Hooks
Materials Carbon Steel
Finishes Plain
Zinc
J3
Fax 1.262.786.3530 www.americanboltcorp.com
Drop Forged Anchor Shackles
Finish Plain
Galvanized
Types Round Pin
Screw Pin
Safety
Dimensions
Work-
Inside Weight
ing load Pin or
Width Width OD Per 100
Limit in Size Length Bolt Dia
at Eyes Tol. ± at Bow Tol. ± Eyes (D) Pcs
Tons Dia. (C) (E)
(A) (B)
1/3 3/16 3/8 1/16 9/16 7/8 1/16 5/8 1/4 7
1/2 1/4 15/32 1/16 3/4 1-1/8 1/16 3/4 5/16 13.5
3/4 5/16 17/32 1/16 15/16 1-1/4 1/16 7/8 3/8 22
1 3/8 21/32 1/16 1-1/8 1-7/16 1/8 1 7/16 33
1-1/2 7/16 23/32 1/16 1-5/16 1-11/16 1/8 1-1/8 1/2 53.5
2 1/2 13/16 1/16 1-1/2 1-15/16 1/8 1-1/4 5/8 76.5
3-1/4 5/8 1-1/16 1/16 1-7/8 2-1/2 1/8 1-11/16 3/4 150.5
4-3/4 3/4 1-1/4 1/16 2 3 1/4 1-7/8 7/8 245.5
6-1/2 7/8 1-7/16 1/16 2-5/8 3-1/4 1/4 2-1/8 1 375
8-1/2 1 1-11/16 1/16 2-3/4 3-3/4 1/4 2-1/2 1-1/8 537.5
9-1/2 1-1/8 1-13/16 1/16 2-15/16 4-1/4 1/4 2-5/8 1-1/4 765
12 1-1/4 2 1/16 3-1/4 4-1/2 1/4 3 1-3/8 1,007.5
13-1/2 1-3/8 2-1/4 1/8 3-1/2 5-1/4 1/4 3-1/4 1-1/2 1,232.5
17 1-1/2 2-3/8 1/8 3-3/4 5-3/4 1/4 3-1/2 1-5/8 1,777.5
J4
www.americanboltcorp.com 1.800.588.1200
Machinery Eye Bolts
Materials Steel
Finishes Plain
Zinc
Hot Dip Galv
Styles Plain or Shoulder
Blank or Threaded
J5
Fax 1.262.786.3530 www.americanboltcorp.com
Drop Forged Lifting Eyes
Finish Plain
Galvanized
Dimensionis Working
Wt. Per
Load Limit
Stock # Size A C D E F S T 100 Pcs
(Tons)
C-186A 1/4-20 1-1/4 3/4 1-1/16 19/32 1/2 1/4 1-11/16 .26 8.2
J C-186B 5/16-18 1-1/4 3/4 1-1/16 19/32 1/2 1/4 1-11/16 .42 8
C-187A 3/8-16 1-5/8 1 1-1/4 3/4 9/16 5/16 2-1/16 .62 15.7
C-185B 7/16-14 2 1-1/4 1-1/2 1 13/16 3/8 2-1/2 .85 29.7
C-185A 1/2-13 2 1-1/4 1-1/2 1 13/16 3/8 2-1/2 1.12 29.3
C-181A 5/8-11 2-1/2 1-1/2 2 1-3/16 1 1/2 3-3/16 1.8 61.5
C-184A 3/4-10 3 1-3/4 2-3/8 1-3/8 1-1/8 5/8 3-7/8 2.6 103
C-188A 7/8-9 3-1/2 2 2-5/8 1-5/8 1-5/16 3/4 4-5/16 3.6 163
C-188B 1-8 3-1/2 2 2-5/8 1-5/8 1-5/16 3/4 4-5/16 3.6 161
J6
www.americanboltcorp.com 1.800.588.1200
Malleable Wire Rope clamps
Materials Malleable Iron base
Steel U-Bolt
Finishes Plain
Zinc
Hot Dip Galv
Closed Open
J7
Fax 1.262.786.3530 www.americanboltcorp.com
S-Hooks
Materials Low Carbon Steel
Stainless Steel
Finish Zinc
Dimensions
Wire Working
Stock No. Overall Inside Wt. Per
Diam- Opening Load Limits
Length Diameter 100 Pcs
eter
S-1 .080 3/4 1/4 1/8 .26 7
S-1A .105 1 5/16 5/32 .55 16
S-2 .114 1-1/4 3/8 3/16 .83 17
S-2A .148 1-1/2 7/16 7/32 1.62 26
S-3 .186 1-3/4 1/2 1/4 2.97 40
S-4 .220 2-1/8 5/8 5/16 5.15 58
S-5 .250 2-1/2 3/4 7/16 7.5 70
S-6 .312 3 7/8 1/2 13.9 132
S-7 .375 3-1/2 1 1/2 23.44 170
J8
www.americanboltcorp.com 1.800.588.1200
U-Bolts
Materials Low Carbon Steel
Stainless Steel
Finishes Zinc
Galvanized
J9
Fax 1.262.786.3530 www.americanboltcorp.com
tURNED EYE BOLTS
Materials Low Carbon Steel
Stainless Steel
Finish Zinc
J10
www.americanboltcorp.com 1.800.588.1200
Turned Eye Bolts
Materials Low Carbon Steel
Stainless Steel
Finishes Zinc
J11
Fax 1.262.786.3530 www.americanboltcorp.com
www.americanboltcorp.com 1.800.588.1200
Miscellaneous
Chemicals
Chemical Maintenance Products 2
Lubricants & Greases 3
Saf-T-Lok 4
Electrical
Terminals 5
Connectors 5
Disconnects 6
Cable Ties 7
K1
Fax 1.262.786.3530 www.americanboltcorp.com
Chemical Maintenance Products
CRC
K2
www.americanboltcorp.com 1.800.588.1200
Lubricants & Greases
CRC
Lubricants Greases
Screwloose Super White Multi-Purpose Grease
3-36 Lithium General Puropse Grease
Aviation 3-36 Constant Velocity Joint Grease
Power Lube w/TEFLON Moly-Graph Extreme Pressure Multi-Purpose
Dry Glide Lithium Grease
Utlra-Lite 3-36 Sta-Plex Premium Red Grease
Extreme Duty Silicone New Generation Wheel Bearing Grease for Disc
Food Grade Silicone and Drum Brakes
Food Grade Machine Oil Permatherm High Temp Synthetic Grease
Food Grade Chain Lube Brake Caliper Synthetic Grease
Chain & Wire Rope Lubricant Heavy Duty Drum Break Wheel Bearing Grease
Dry Moly Lub Ball & Roller Bearing Grease
White Lithium Grease Plexalube Low Speed Bearing Grease
Red Grease Multi-Purpose Food Grade Grease
Di-Electric Grease Hi-Temp Disc Brake Wheel Bearing Grease
Belt Dressing Marine Grade Grease for Boat Trailer Wheel
Spinnerette Lubricant Bearings
Copper Anti-Seize
Nickle Anti-Seize
Welder’s Anti-Spatter
K3
Fax 1.262.786.3530 www.americanboltcorp.com
SAF-T-LOk
SAF-T-EZE Anti-Seize Products also Available
Loctite Products also Available
Threadlocking
S90 Penetrating - Wicking Low-Viscosity / Medium Strength
T20 Fine Screws Low Strength / Adjustable Threadlocker
T22 Holds Small Nuts and Screws Low Strength / Adjustable Threadlocker
T41 Bearing Mount Medium Strength / Removable Threadlocker
T42 Locks Nuts and Screws Medium Strength / Removable Threadlocker
T43 Locks Nuts and Screws Medium Strength / Removable Threadlocker
T62 Lock Studs, Nuts and Bolts High Strength Threadlocker
T70 Lock Studs to 1/2" Diameter High Strength / Permanent Threadlocker
T72 Lock Studs High Temperature / Threadlocker
T77 Lock Studs (over 1/2") High Strength / Permanent Threadlocker
Retaining
R01 General Purpose Low-Viscosity / High Strength
R20 Hi-Temp Hi-Viscosity
R35 Ultimate Performance Medium-Viscosity / High-Strength
R38 Performance Low-Viscosity / Very High-Strength
R41 Bearing Mount Medium-Viscosity / Medium-Strength
R42 Performance Medium-Viscosity / Very High-Strength
R48 Performance Medium-Viscosity / Very High-Strength
R60 Gap Filling, Non-Migrating High-Viscosity / High-Strength
R80 Alignment High-Viscosity / High-Strength
R90 Wicking Press Fit Low-Viscosity / Medium-Strength
K4
www.americanboltcorp.com 1.800.588.1200
Electrical
Terminals Connectors
Rings Non-Insulated Closed End Non-Insulated
Vinyl Insulated Vinyl Insulated
Nylon Insulated Nylon Insulated
Flag Terminals Flag Terminals
Tubular Lugs
*Conduit available
K5
Fax 1.262.786.3530 www.americanboltcorp.com
Electrical
Disconnects
Male & Female Non-Insulated
Vinyl Insulated
PC Insulated
Piggyback
Knife
Female Flag
*Conduit available
K6
www.americanboltcorp.com 1.800.588.1200
cABLE tIES
K7
Fax 1.262.786.3530 www.americanboltcorp.com
www.americanboltcorp.com 1.800.588.1200
Technical Information
Hex Head Cap Screws 2-3 Oval Head 36
Hex Machine Bolts 4 Pan Head 36
Heavy Hex Head Bolts 5 Truss Head 37
Carriage Bolts 6 Round Head 37
Lag Screws 7 Threads for Self Tapping Screws 38-39
Flat Head Elevator Bolts 8 Bugle Head 40
Hanger Bolts 9 Flat Head Torx Drive 41
No. 3 Head Plow Bolts 10 Drywall and Deck Screws 41
Slotted Flat Countersunk Head Cap Screws 10 Wood Screws 41
Hex Nut Grade Markings 11 Serrated Flange Screws 41
Hex Full and Jam Nuts 12 Self-Drilling Screws 42
Heavy Hex Full and Jam Nuts 13 Thumb Screws 43
Hex Slotted Nuts 14 Drive Screws 43
Heavy Hex Slotted Nuts 15 Socket Head Cap Screws 44
Hex Castle Nuts 16 Flat Socket Head Cap Screws 45
Square and Hex Machine Screw Nuts 17 Button Socket Head Cap Screws 46
Regular Square Nuts 17 Low Head Socket Cap Screws 46
Wing Nuts 18 Socket Head Shoulder Screws 47
T-Nuts Straight Barrel 19 Socket Set Screws 48
Two Piece Hex Cap Nuts 20 Square Head Set Screws 49
Hex Coupling Nuts 20 Socket Pipe Plug 50
Nylon Insert Lock Nuts - Full and Jam 21 Socket Hex Keys (Allen) 51
Nylon Insert Lock Nuts - Heavy 22 Dowel Pins 52
Serrated Flange Lock Nuts 23 Spring Pins 52
Keps Lock Nuts 23 Cotter Pins 53
Unitorque Lock Nuts 24 Retaining Ring Type E 54
Flat Washers 25-26 Retaining Ring Type SH 55
Direct Tension Indicating Washers 27 Retaining Ring Type HO 56
Regular Lock Washers 28 Rivets 57-60
Countersunk Finishing Washers 29 Plating/Baking Specifications 61
Hi-Collar Lock Washers 29 Millimeter to Inch Conversions 62
Tooth Lock Washers 30 Tap Drill Sizes 63
Tolerance on Length - Screws 31 Bolt Clamp Loads 64-66
Slotted Round Head Machine Screws 32
Slotted Flat Head Machine Screws 33
Binding Head Under Cut 34
Fillister Head 34
Flat Head Undercut 35
Hex Head and Hex Washer Head 35 L
L1
Fax 1.262.786.3530 www.americanboltcorp.com
Hex head Cap Screws
D WF WC
Nominal Diameter Width Across
Body Diameter Width Across Flats
Corners
Fractional Decimal Max Min Basic Max Min Max Min
1/4 0.2500 0.2500 0.2450 7/16 0.438 0.428 0.505 0.488
5/16 0.3125 0.3125 0.3065 1/2 0.500 0.489 0.577 0.557
3/8 0.3750 0.3750 0.3690 9/16 0.562 0.551 0.650 0.628
7/16 0.4375 0.4375 0.4305 5/8 0.625 0.612 0.722 0.698
1/2 0.5000 0.5000 0.4930 3/4 0.750 0.736 0.866 0.840
9/16 0.5625 0.5625 0.5545 13/16 0.812 0.798 0.938 0.910
5/8 0.6250 0.6250 0.6170 15/16 0.938 0.922 1.083 1.051
3/4 0.7500 0.7500 0.7410 1-1/8 1.125 1.100 1.299 1.254
7/8 0.8750 0.8750 0.8660 1-5/16 1.312 1.285 1.516 1.465
1 1.0000 1.0000 0.9900 1-1/2 1.500 1.469 1.732 1.675
1-1/8 1.1250 1.1250 1.1140 1-11/16 1.688 1.631 1.949 1.859
1-1/4 1.2500 1.2500 1.2390 1-7/8 1.875 1.812 2.165 2.066
1-3/8 1.3750 1.3750 1.3630 2-1/16 2.062 1.994 2.382 2.273
1-1/2 1.5000 1.5000 1.4880 2-1/4 2.250 2.175 2.598 2.480
1-3/4 1.7500 1.7500 1.7380 2-5/8 2.625 2.538 3.031 2.893
2 2.0000 2.0000 1.9880 3 3.000 2.900 3.464 3.306
2-1/4 2.2500 2.2500 2.2380 3-3/8 3.375 3.262 3.897 3.719
2-1/2 2.5000 2.5000 2.4880 3-3/4 3.750 3.625 4.330 4.133
2-3/4 2.7500 2.7500 2.7380 4-1/8 4.125 3.988 4.763 4.546
3 3.0000 3.0000 2.9880 4-1/2 4.500 4.350 5.196 4.959
L2
www.americanboltcorp.com 1.800.588.1200
Hex head CAp Screws
Continued
H J R
Runout of
Nominal Diameter Wrenching Bearing Sur- Radius of
Head Height face FIR
Height Fillet
L3
Fax 1.262.786.3530 www.americanboltcorp.com
Hex Machine Bolts
D WF WC H R
Nominal
Diameter Body Radius of
Width Across Flats Width Across Corners Head Height
Dia Fillet
Frac-
Decimal Max Basic Max Min Max Min Basic Max Min Max Min
tional
1/4 0.2500 0.260 7/16 0.438 0.425 0.505 0.484 11/64 0.188 0.150 0.03 0.01
5/16 0.3125 0.324 1/2 0.500 0.484 0.577 0.552 7/32 0.235 0.195 0.03 0.01
3/8 0.3750 0.388 9/16 0.562 0.544 0.650 0.620 1/4 0.268 0.226 0.03 0.01
7/16 0.4375 0.452 5/8 0.625 0.603 0.722 0.687 19/64 0.316 0.272 0.03 0.01
1/2 0.5000 0.515 3/4 0.750 0.725 0.866 0.826 11/32 0.364 0.302 0.03 0.01
5/8 0.6250 0.642 15/16 0.938 0.906 1.083 1.033 27/64 0.444 0.378 0.06 0.02
3/4 0.7500 0.768 1-1/8 1.125 1.088 1.299 1.240 1/2 0.524 0.455 0.06 0.02
7/8 0.8750 0.895 1-5/16 1.312 1.269 1.516 1.447 37/64 0.604 0.531 0.06 0.02
1 1.0000 1.022 1-1/2 1.500 1.450 1.732 1.653 43/64 0.700 0.591 0.09 0.03
1-1/8 1.1250 1.149 1-11/16 1.688 1.631 1.949 1.859 3/4 0.780 0.658 0.09 0.03
1-1/4 1.2500 1.277 1-7/8 1.875 1.812 2.165 2.066 27/32 0.876 0.749 0.09 0.03
1-3/8 1.3750 1.404 2-1/16 2.062 1.994 2.382 2.273 29/32 0.940 0.810 0.09 0.03
1-1/2 1.5000 1.531 2-1/4 2.250 2.175 2.598 2.480 1 1.036 0.902 0.09 0.03
1-3/4 1.7500 1.785 2-5/8 2.625 2.538 3.031 2.893 1-5/32 1.196 1.054 0.12 0.04
2 2.0000 2.039 3 3.000 2.900 3.464 3.306 1-11/32 1.388 1.175 0.12 0.04
2-1/4 2.2500 2.305 3-3/8 3.375 3.262 3.897 3.719 1-1/2 1.548 1.327 0.19 0.06
2-1/2 2.5000 2.559 3-3/4 3.750 3.625 4.330 4.133 1-21/32 1.708 1.479 0.19 0.06
2-3/4 2.7500 2.827 4-1/8 4.125 3.988 4.763 4.546 1-13/16 1.869 1.632 0.19 0.06
3 3.0000 3.081 4-1/2 4.500 4.350 5.196 4.959 2 2.060 1.815 0.19 0.06
3-1/4 3.2500 3.335 4-7/8 4.875 4.712 5.629 5.372 2-3/16 2.251 1.936 0.19 0.06
3-1/2 3.5000 3.589 5-1/4 5.250 5.075 6.062 5.786 2-5/16 2.380 2.057 0.19 0.06
3-3/4 3.7500 3.858 5-5/8 5.625 5.437 6.495 6.198 2-1/2 2.572 2.241 0.19 0.06
4 4.000 4.111 6 6.000 5.800 6.928 6.612 2-11/16 2.764 2.424 0.19 0.06
L4
www.americanboltcorp.com 1.800.588.1200
Heavy hex head Bolts
D WF WC H R
Nominal
Diameter Body Radius of
Width Across Flats Width Across Corners Head Height
Dia Fillet
Frac- Deci-
Max Basic Max Min Max Min Basic Max Min Max Min
tional mal
1/2 0.5000 0.515 7/8 0.875 0.850 1.010 0.969 11/32 0.364 0.302 0.03 0.01
5/8 0.6250 0.642 1-1/16 1.062 1.031 1.227 1.175 27/64 0.444 0.378 0.06 0.02
3/4 0.7500 0.768 1-1/4 1.250 1.212 1.443 1.383 1/2 0.524 0.455 0.06 0.02
7/8 0.8750 0.895 1-7/16 1.438 1.394 1.660 1.589 37/64 0.604 0.531 0.06 0.02
1 1.0000 1.022 1-5/8 1.625 1575 1.876 1.796 43/64 0.700 0.591 0.09 0.03
1-1/8 1.1250 1.149 1-13/16 1.812 1.756 2.093 2.002 3/4 0.780 0.658 0.09 0.03
1-1/4 1.2500 1.277 2 2.000 1.938 2.309 2.209 27/32 0.876 0.749 0.09 0.03
1-3/8 1.3750 1.404 2-3/16 2.188 2.119 2.526 2.416 29/32 0.940 0.810 0.09 0.03
1-1/2 1.5000 1.531 2-3/8 2.375 2.300 2.742 2.622 1 1.036 0.902 0.09 0.03
1-3/4 1.7500 1.785 2-3/4 2.750 2.662 3.175 3.035 1-5/32 1.196 1.054 0.12 0.04
2 2.0000 2.039 3-1/8 3.125 3.025 3.608 3.449 1-11/32 1.388 1.175 0.12 0.04
2-1/4 2.2500 2.305 3-1/2 3.500 3.388 4.041 3.862 1-1/2 1.548 1.327 0.19 0.06
2-1/2 2.5000 2.559 3-7/8 3.875 3.750 4.474 4.275 1-21/32 1.708 1.479 0.19 0.06
2-3/4 2.7500 2.827 4-1/4 4.250 4.112 4.907 4.688 1-13/16 1.869 1.632 0.19 0.06
3 3.0000 3.081 4-5/8 4.625 4.475 5.340 5.102 2 2.060 1.815 0.19 0.06
L5
Fax 1.262.786.3530 www.americanboltcorp.com
Carriage Bolts
D WF WC H R
Nominal
Diameter Body Radius of
Width Across Flats Width Across Corners Head Height
Dia Fillet
Frac- Deci-
Max Basic Max Min Max Min Basic Max Min Max Min
tional mal
1/4 0.2500 0.260 7/16 0.438 0.425 0.505 0.484 11/64 0.188 0.150 0.03 0.01
5/16 0.3125 0.324 1/2 0.500 0.484 0.577 0.552 7/32 0.235 0.195 0.03 0.01
3/8 0.3750 0.388 9/16 0.562 0.544 0.650 0.620 1/4 0.268 0.226 0.03 0.01
7/16 0.4375 0.452 5/8 0.625 0.603 0.722 0.687 19/64 0.316 0.272 0.03 0.01
1/2 0.5000 0.515 3/4 0.750 0.725 0.866 0.826 11/32 0.364 0.302 0.03 0.01
5/8 0.6250 0.642 15/16 0.938 0.906 1.083 1.033 27/64 0.444 0.378 0.06 0.02
3/4 0.7500 0.768 1-1/8 1.125 1.088 1.299 1.240 1/2 0.524 0.455 0.06 0.02
7/8 0.8750 0.895 1-5/16 1.312 1.269 1.516 1.447 37/64 0.604 0.531 0.06 0.02
1 1.0000 1.022 1-1/2 1.500 1.450 1.732 1.653 43/64 0.700 0.591 0.09 0.03
1-1/8 1.1250 1.149 1-11/16 1.688 1.631 1.949 1.859 3/4 0.780 0.658 0.09 0.03
1-1/4 1.2500 1.277 1-7/8 1.875 1.812 2.165 2.066 27/32 0.876 0.749 0.09 0.03
1-3/8 1.3750 1.404 2-1/16 2.062 1.994 2.382 2.273 29/32 0.940 0.810 0.09 0.03
1-1/2 1.5000 1.531 2-1/4 2.250 2.175 2.598 2.480 1 1.036 0.902 0.09 0.03
1-3/4 1.7500 1.785 2-5/8 2.625 2.538 3.031 2.893 1-5/32 1.196 1.054 0.12 0.04
2 2.0000 2.039 3 3.000 2.900 3.464 3.306 1-11/32 1.388 1.175 0.12 0.04
2-1/4 2.2500 2.305 3-3/8 3.375 3.262 3.897 3.719 1-1/2 1.548 1.327 0.19 0.06
2-1/2 2.5000 2.559 3-3/4 3.750 3.625 4.330 4.133 1-21/32 1.708 1.479 0.19 0.06
2-3/4 2.7500 2.827 4-1/8 4.125 3.988 4.763 4.546 1-13/16 1.869 1.632 0.19 0.06
3 3.0000 3.081 4-1/2 4.500 4.350 5.196 4.959 2 2.060 1.815 0.19 0.06
3-1/4 3.2500 3.335 4-7/8 4.875 4.712 5.629 5.372 2-3/16 2.251 1.936 0.19 0.06
3-1/2 3.5000 3.589 5-1/4 5.250 5.075 6.062 5.786 2-5/16 2.380 2.057 0.19 0.06
3-3/4 3.7500 3.858 5-5/8 5.625 5.437 6.495 6.198 2-1/2 2.572 2.241 0.19 0.06
4 4.000 4.111 6 6.000 5.800 6.928 6.612 2-11/16 2.764 2.424 0.19 0.06
L6
www.americanboltcorp.com 1.800.588.1200
Lag Screws
E WF WC
Nominal Diameter Body or Shoulder
Width Across Flats Width Across Corners
Diameter
Fractional Decimal Max Min Basic Max Min Max Min
#10 0.1900 0.199 0.178 9/32 0.281 0.271 0.323 0.309
1/4 0.2500 0.260 0.237 7/16 0.438 0.425 0.505 0.484
5/16 0.3125 0.324 0.298 1/2 0.500 0.484- 0.577 0.552
3/8 0.3750 0.388 0.360 9/16 0.562 0.544 0.650 0.620
7/16 0.4375 0.452 0.421 5/8 0.625 0.603 0.722 0.687
1/2 0.5000 0.515 0.482 3/4 0.750 0.725 0.866 0.826
5/8 0.6250 0.642 0.605 15/16 0.938 0.906 1.083 1.033
3/4 0.7500 0.768 0.729 1-1/8 1.125 1.088 1.299 1.240
7/8 0.8750 0.895 0.852 1-5/16 1.312 1.269 1.516 1.447
1 1.0000 1.022 0.976 1-1/2 1.500 1.450 1.732 1.653
1-1/8 1.1250 1.149 1.098 1-11/16 1.688 1.631 1.949 1.859
1-1/4 1.2500 1.277 1.223 1-7/8 1.875 1.812 2.165 2.066
H S R
Nominal Diameter Shoulder Threads
Head Height Radius of Fillet
Length Per Inch
Fractional Decimal Basic Max Min Min Max Min
#10 0.1900 1/8 0.140 0.110 0.094 0.03 0.01 11
1/4 0.2500 11/64 0.188 0.150 0.094 0.03 0.01 10
5/16 0.3125 7/32 0.235 0.195 0.125 0.03 0.01 9
3/8 0.3750 1/4 0.268 0.226 0.125 0.03 0.01 7
7/16 0.4375 19/64 0.316 0.272 0.156 0.03 0.01 7
1/2 0.5000 11/32 0.364 0.302 0.156 0.03 O.Ol 6
5/8 0.6250 27/64 0.444 0.378 0.312 0.06 0.02 5
3/4 0.7500 1/2 0.524 0.455 0.375 0.06 0.02 4-1/2
7/8 0.8750 37/64 0.604 0.531 0.375 0.06 0.02 4
1 1.0000 43/64 0.700 0.591 0.625 0.09 0.03 3-1/2
1-1/8 1.1250 3/4 0.780 0.658 0.625 0.09 0.03 3-1/4
1-1/4 1.2500 27/32 0.876 0.749 0.625 0.09 0.03 3-1/4
L7
Fax 1.262.786.3530 www.americanboltcorp.com
Flat Head Elevator Bolts
D HD C F
Nominal Diameter Head Diameter Flat on
Head
Body Diameter Min Dia
Max Edge Min Edge Min Edge Angle
Head
Sharp Sharp Flat
Fraction Decimal Max Min Ref Max
#10 0.1900 0.199 0.182 0.790 0.750 0.740 9° 0.025
1/4 0.2500 0.260 0.237 1.008 0.969 0.938 9° 0.035
5/16 0.3125 0.324 0.298 1.227 1.188 1.157 9° 0.035
3/8 0.3750 0.388 0.360 1.352 1.312 1.272 11° 0.040
7/16 0.4375 0.452 0.421 1.477 1.438 1.397 13° 0.040
1/2 0.5000 0.515 0.483 1.602 1.562 1.522 12° 0.040
H SW SD Q R
Nominal Corner
Diameter Fillet
Head Height Square Width Square Depth Radius on
Radius
Square
Fraction Decimal Max Min Max Min Max Min Max Min
#10 0.1900 0.082 0.062 0.210 0.185 0.125 0.094 0.031 0.031
1/4 0.2500 0.098 0.078 0.280 0.245 0.219 0.188 0.031 0.031
5/16 0.3125 0.114 0.094 0.342 0.307 0.250 0.219 0.031 0.031
3/8 0.3750 0.145 0.125 0.405 0.368 0.250 0.219 0.047 0.031
7/16 0.4375 0.176 0.156 0.468 0.431 0.281 0.250 0.047 0.031
1/2 0.5000 0.176 0.156 0.530 0.492 0.281 0.250 0.047 0.031
L8
www.americanboltcorp.com 1.800.588.1200
Hanger Bolts
A B C D
L9
Fax 1.262.786.3530 www.americanboltcorp.com
No. 3 Head Plow Bolts
D A L S B
Feed Thick- Depth of Square and
Nominal Diameter of Head Width of Square
ness Head
Diameter
of Bolt Min Abs. Min Min
Max Max Max Min Max
Sharp With Flat (Basic)
3/8 0.708 0.671 0.656 0.031 0.312 0.281 0.387 0.375
7/16 0.826 0.781 0.766 0.036 0.364 0.328 0.450 0.438
1/2 0.945 0.945 0.875 0.042 0.417 0.375 0.515 0.500
5/8 1.147 1.147 1.063 0.506 0.506 0.456 0.640 0.625
3/4 1.303 1.303 1.219 0.541 0.541 0.491 0.765 0.750
F A H J T R C B
Head Diameter
Nominal
Min Fillet Protrusion
Size or Basic Body Head
Max Edge Slot Width Slot Depth Ra- Above Gaging Gaging
Screw Diameter Height
Edge Round- dius Diameter Diameter
Diameter
Sharp ed or
Max Min Flat Ref Max Min Max Min Max Max Min
1/4 0.2500 0.2500 0.2450 0.500 0.452 0.140 0.075 0.064 .0.68 0.045 0.100 0.046 0.030 0.424
5/16 0.3125 0.3125 0.3070 0.625 0.567 0.177 0.084 0.072 0.086 0.057 0.125 0.053 0.035 0.538
3/8 0.3750 0.3750 0.3690 0.750 0.682 0.210 0.094 0.081 0.103 0.068 0.150 0.060 0.040 0.651
7/16 0.4375 0.4375 0.4310 0.812 0.736 0.210 0.094 0.081 0.103 0.068 0.175 0.065 0.044 0.703
1/2 0.5000 0.5000 0.4930 0.875 0.791 0.210 0.106 0.091 0.103 0.068 0.200 0.071 0.049 0.756
9/16 0.5625 0.5625 0.5550 1.000 0.906 0.244 0.118 0.102 0.120 0.080 0.225 0.078 0.054 0.869
5/8 0.6250 0.6250 0.6170 1.125 1.020 0.281 0.133 0.116 0.137 0.091 0.250 0.085 0.058 0.982
3/4 0.7500 0.7500 0.7420 1.375 1.251 0.352 0.149 0.131 0.171 0.115 0.300 0.099 0.068 1.208
7/8 0.8750 0.8750 0.8660 1.625 1.480 0.423 0.167 0.147 0.206 0.138 0.350 0.113 0.077 1.435
1 1.0000 1.0000 0.9900 1.875 1.711 0.494 0.188 0.166 0.240 0.162 0.400 0.127 0.087 1.661
1-1/8 1.1250 1.1250 1.1140 2.062 1.880 0.529 0.196 0.178 0.257 0.173 0.450 0.141 0.096 1.826
1-1/4 1.2500 1.2500 1.2390 2.312 2.110 0.600 0.211 0.193 0.291 0.197 0.500 0.155 0.105 2.052
1-3/8 1.3750 1.3750 1.3630 2.562 2.340 0.665 0.226 0.208 0.326 0.220 0.550 0.169 0.115 2.279
L 1-1/2 1.5000 1.5000 1.4880 2.812 2.570 0.742 0.258 0.240 0.360 0.244 0.600 0.183 0.124 2.505
See page A17 for Product Offerings
L10
www.americanboltcorp.com 1.800.588.1200
Hex Nut Grade Markings
Proof Hardness
Grade
Nominal Load Rockwell
Identification Specification Material
Size In. Stress
Marking Min Max
ksi
ASTM A563 - Gr. 0 Carbon Steel 1/4 thru 1-1/2 69 B55 C32
ASTM A563 - Gr. A Carbon Steel 1/4 thru 1-1/2 90 B68 C32
ASTM A563 - Gr. B Carbon Steel 1/4 thru 1 120 B69 C32
Carbon Steel
over 1/4 thru
ASTM A563 - Gr. C May be Quenched and 105 B78 C38
Tempered 1-1/2
Atmospheric Corrosion
Resistant Steel
ASTM A563 - Gr. C3 May be Quenched and
1/4 thru 4 144 B78 C38
Tempered
Carbon Steel
ASTM A563 - Gr. D May be Quenched and 1/4 thru 4 144 B84 C38
Tempered
Carbon Steel
ASTM A563 - Gr. DH May be Quenched and 1/4 thru 4 150 C24 C38
Tempered
Atmospheric Corrosion
ASTM A563 - Gr. Resistant Steel
1/4 thru 4 175 C24 C38
DH3 May be Quenched and
Tempered
ASTM A194 - Gr. 2 Medium Carbon Steel 1/4 thru 4 150 159 352
L11
Fax 1.262.786.3530 www.americanboltcorp.com
Hex Full and Jam Nuts
Finished Hex Nuts, Two Way Reversible Lock Nuts
Nominal Or F G H H1
Basic Major Width Across Thickness Hex Nuts &
Width Across Flats Thickness Hex Jam Nuts
Diameter of Corners Reversible Lock Nuts
Thread Basic Max Min Max Min Basic Max Min Basic Max Min
#8 0.1640 11/32 0.344 0.332 0.397 0.378 - 0.203 0.187 - - -
#10 0.1900 3/8 0.375 0.362 0.433 0.413 - 0.203 0.187 - - -
1/4 0.2500 7/16 0.438 0.428 0.505 0.488 7/32 0.226 0.212 5/32 0.164 0.150
5/16 0.3125 1/2 0.500 0.489 0.577 0.557 17/64 0.273 0.258 3/16 0.195 0.180
3/8 0.3750 9/16 0.562 0.551 0.650 0.628 21/64 0.337 0.320 7/32 0.227 0.210
7/16 0.4375 11/16 0.688 0.675 0.794 0.768 3/8 0.385 0.365 1/4 0.260 0.240
1/2 0.5000 3/4 0.750 0.736 0.866 0.840 7/16 0.448 0.427 5/16 0.323 0.302
9/16 0.5625 7/8 0.875 0.861 1.010 0.982 31/64 0.496 0.473 5/16 0.324 0.301
5/8 0.6250 15/16 0.938 0.922 1.083 1.051 35/64 0.559 0.535 3/8 0.387 0.363
3/4 0.7500 1-1i8 1.125 1.088 1.299 1.240 41/64 0.665 0.617 27/64 0.446 0.398
7/8 0.8750 1-5/16 1.312 1.269 1.516 1.447 3/4 0.776 0.724 31/64 0.510 0.458
1 1.0000 1-1/2 1.500 1.450 1.732 1.653 55/64 0.887 0.831 35/64 0.575 0.519
1-1/8 1.1250 1-11/16 1.688 1.631 1.949 1.859 31/32 0.999 0.939 39/64 0.639 0.579
1-1/4 1.2500 1-7/8 1.875 1.812 2.165 2.066 1-1/6 1.094 1.030 23/32 0.751 0.687
1-3/8 1.3750 2-1/16 2.062 1.994 2.382 2.273 1-11/64 1.206 1.138 25/32 0.815 0.747
1-1/2 1.5000 2-1/4 2.250 2.175 2.598 2.480 1-9/32 1.317 1.245 27/32 0.880 0.808
1-5/8 1.6250 2-7/16 2.438 2.356 2.815 2.686 1-25/64 1.429 1.353 29/32 0.945 0.869
1-3/4 1.7500 2-5/8 2.625 2.538 3.031 2.893 1-1/2 1.540 1.460 31/32 1.009 0.929
2 2.0000 3 3.000 2.900 3.464 3.306 1-23/32 1.763 1.675 1-3/32 1.138 1.050
2-1/4 2.2500 3-3/8 3.375 3.263 3.897 3.719 1-15/16 1.986 1.890 1-7/32 1.267 1.171
2-1/2 2.5000 3-3/4 3.750 3.625 4.330 4.133 2-5/32 2.209 2.105 1-11/32 1.396 1.292
2-3/4 2.7500 4-1/8 4.125 3.988 4.763 4.546 2-3/8 2.431 2.319 1-15/32 1.525 1.413
3 3.0000 4-1/2 4.500 4.350 5.196 4.959 2-19/32 2.654 2.534 1-19/32 1.654 1.534
L12
www.americanboltcorp.com 1.800.588.1200
Heavy Hex Full and Jam Nuts
WF WC TF TJ
Nominal
Diameter Width Across Thickness Heavy Jam
Width Across Flats Thickness Heavy Hex Nuts
Corners Nuts
Frac- Deci-
Basic Max Min Max Min Basic Max Min Basic Max Min
tional mal
1/4 0.2500 1/2 0.500 0.488 0.577 0.556 15/64 0.250 0.218 11/64 0.188 0.156
5/16 0.3125 9/16 0.562 0.546 0.650 0.622 19/64 0.314 0.280 13/64 0.220 0.186
3/8 0.3750 11/16 0.688 0.669 0.794 0.763 23/64 0.377 0.341 15/64 0.252 0.216
7/16 0.4375 3/4 0.750 0.728 0.866 0.830 27/64 0.441 0.403 17/64 0.285 0.247
1/2 0.5000 7/8 0.875 0.850 1.010 0.969 31/64 0.504 0.464 19/64 0.317 0.277
9/16 0.5625 15/16 0.938 0.909 1.083 1.037 35/64 0.568 0.526 21/64 0.349 0.307
5/8 0.6250 1-1/16 1.062 1.031 1.227 1.175 39/64 0.631 0.587 23/64 0.381 0.337
3/4 0.7500 1-1/4 1.250 1.212 1.443 1.382 47/64 0.758 0.710 27/64 0.446 0.398
7/8 0.8750 1-7/16 1.438 1.394 1.660 1.589 55/64 0.885 0.833 31/64 0.510 0.458
1 1.0000 1-5/8 1.625 1.575 1.876 1.796 63/64 1.012 0.956 35/64 0.575 0.519
1-1/8 1.1250 1-13/16 1.812 1.756 2.093 2.002 1-7/64 1.139 1.079 39/64 0.639 0.579
1-1/4 1.2500 2 2.000 1.938 2.309 2.209 1-7/32 1.251 1.187 23/32 0.751 0.687
1-3/8 1.3750 2-3/16 2.188 2.119 2.526 2.416 1-11/32 1.378 1.310 25/32 0.815 0.747
1-1/2 1.5000 2-3/8 2.375 2.300 2.742 2.622 1-15/32 1.505 1.433 27/32 0.880 0.808
1-5/8 1.6250 2-9/16 2.562 2.481 2.959 2.828 1-19/32 1.632 1.556 29/32 0.944 0.868
1-3/4 1.7500 2-3/4 2.750 2.662 3.175 3.035 1-23/32 1.759 1.679 31/32 1.009 0.929
1-7/8 1.8750 2-15/16 2.938 2.844 3.392 3.242 1-27/32 1.886 1.802 1-1/32 1.073 0.989
2 2.0000 3-1/8 3.125 3.025 3.608 3.449 1-31/32 2.013 1.925 1-3/32 1.138 1.050
2-1/4 2.2500 3-1/2 3.500 3.388 4.041 3.862 2-13/64 2.251 2.155 1-13/64 1.251 1.155
2-1/2 2.5000 3-7/8 3.875 3.750 4.474 4.275 2-29/64 2.505 2.401 1-29/64 1.505 1.401
2-3/4 2.7500 4-1/4 4.250 4.112 4.907 4.688 2-45/64 2.759 2.647 1-37/64 1.634 1.522
3 3.0000 4-5/8 4.625 4.475 5.340 5.102 2-61/64 3.013 2.893 1-45/64 1.763 1.643
3-1/4 3.2500 5 5.000 4.838 5.774 5.515 3-3/16 3.252 3.124 1-13/16 1.876 1.748
3-1/2 3.5000 5-3/8 5.375 5.200 6.207 5.928 3-7/16 3.506 3.370 1-15/16 2.006 1.870
3-3/4 3.7500 5-3/4 5.750 5.562 6.640 6.341 3-11/16 3.760 3.616 2-1/16 2.134 1.990
4 4.0000 6-1/8 6.125 5.925 7.073 6.755 3-15/16 4.014 3.862 2-3/16 2.264 2.112
L13
Fax 1.262.786.3530 www.americanboltcorp.com
Hex Slotted Nuts
WF WC T UT SW Run-
out of
Nominal
Width Across Unslotted Width of Bearing
Diameter Width Across Flats Thickness
Corners Thickness Slot Surface
FIR
Frac- Deci-
Basic Max Min Max Min Basic Max Min Max Min Max Min Max
tional mal
1/4 0.2500 7/16 0.438 0.428 0.505 0.488 7/32 0.226 0.212 0.14 0.12 0.10 0.07 0.015
5/16 0.3125 1/2 0.500 0.489 0.577 0.557 17/64 0.273 0.258 0.18 0.16 0.12 0.09 0.016
3/8 0.3750 9/16 0.562 0.551 0.650 0.628 21/64 0.337 0.320 0.21 0.19 0.15 0.12 0.017
7/16 0.4375 11/16 0.688 0.675 0.794 0.768 3/8 0.385 0.365 0.23 0.21 0.15 0.12 0.018
1/2 0.5000 3/4 0.750 0.736 0.866 0.840 7/16 0.448 0.427 0.29 0.27 0.18 0.15 0.019
9/16 0.5625 7/8 0.875 0.861 1.010 0.982 31/64 0.496 0.473 0.31 0.29 0.18 0.15 0.020
5/8 0.6250 15/16 0.938 0.922 1.083 1.051 35/64 0.559 0.535 0.34 0.32 0.24 0.18 0.021
3/4 0.7500 1-1/8 1.125 1.088 1.299 1.240 41/64 0.665 0.617 0.40 0.38 0.24 0.18 0.023
7/8 0.8750 1-5/16 1.312 1.269 1.516 1.447 3/4 0.776 0.724 0.52 0.49 0.24 0.18 0.025
1 1.0000 1-1/2 1.500 1.450 1.732 1.653 55/64 0.887 0.831 0.59 0.56 0.30 0.24 0.027
1-1/8 1.1250 1-11/16 1.688 1.631 1.949 1.859 31/32 0.999 0.939 0.64 0.61 0.33 0.24 0.030
1-1/4 1.2500 1-7/8 1.875 1.812 2.165 2.066 1-1/16 1.094 1.030 0.70 0.67 0.40 0.31 0.033
1-3/8 1.3750 2-1/16 2.062 1.994 2.382 2.273 1-11/64 1.206 1.138 0.82 0.78 0.40 0.31 0.036
1-1/2 1.5000 2-1/4 2.250 2.175 2.598 2.480 1-9/32 1.317 1.245 0.86 0.82 0.46 0.37 0.039
L14
www.americanboltcorp.com 1.800.588.1200
Heavy Hex Slotted Nuts
WF WC T UT SW Run-
out of
Nominal
Width Across Unslotted Width of Bearing
Diameter Width Across Flats Thickness
Corners Thickness Slot Surface
FIR
Frac- Deci-
Basic Max Min Max Min Basic Max Min Max Min Max Min Max
tional mal
1/4 0.2500 1/2 0.500 0.488 0.577 0.556 15/64 0.250 0.218 0.15 0.13 0.10 0.07 0.017
5/16 0.3125 9/16 0.562 0.546 0.650 0.622 19/64 0.314 0.280 0.21 0.19 0.12 0.09 0.020
3/8 0.3750 11/16 0.688 0.669 C.794 0.763 23/64 0.377 0.341 0.24 0.22 0.15 0.12 0.021
7/16 0.4375 3/4 0.750 0.728 0.866 0.830 27/64 0.441 0.403 0.28 0.26 0.15 0.12 0.022
1/2 0.5000 7/8 0.875 0.850 1.010 0.969 31/64 0.504 0.464 0.34 0.32 0.18 0.15 0.023
9/16 0.5625 15/16 0.938 0.909 1.083 1.037 35/64 0.568 0.526 0.37 0.35 0.18 0.15 0.024
5/8 0.6250 1-1/16 1.062 1.031 1.227 1.175 39/64 0.631 0.587 0.40 0.38 0.24 0.18 0.025
3/4 0.7500 1-1/4 1.250 1.212 1.443 1.382 47/64 0.758 0.710 0.49 0.47 0.24 0.18 0.027
7/8 0.8750 1-7/16 1.438 1.394 1.660 1.589 55/64 0.885 0.833 0.62 0.59 0.24 0.18 0.029
1 1.0000 1-5/8 1.625 1.575 1.876 1.796 63/64 1.012 0.956 0.72 0.69 0.30 0.24 0.031
1-1/8 1.1250 1-13/16 1.812 1.756 2.093 2.002 1-7/64 1.139 1.079 0.78 0.75 0.33 0.24 0.033
1-1/4 1.2500 2 2.000 1.938 2.309 2.209 1-7/32 1.251 1.187 0.86 0.83 0.40 0.31 0.035
1-3/8 1.3750 2-3/16 2.188 2.119 2.526 2.416 1-11/32 1.378 1.31.0 0.99 0.95 0.40 0.31 0.038
1-1/2 1.5000 2-3/8 2.375 2.300 2.742 2.622 1-15/32 1.505 1.433 1.05 1.01 0.46 0.37 0.041
1-3/4 1.7500 2-3/4 2.750 2.662 3.175 3.035 1-23/32 1.759 1.679 1.24 1.20 0.52 0.43 0.048
2 2.0000 3-1/8 3.125 3.025 3.608 3.449 1-31/32 2.013 1.925 t.43 1.38 0.52 0.43 0.055
2-1/4 2.2500 3-1/2 3.500 3.388 4.041 3.862 2-13/64 2.251 2.155 1.67 1.62 0.52 0.43 0.061
2-1/2 2.5000 3-7/8 3.875 3.750 4.474 4.275 2-29/64 2.505 2.401 1.79 1.74 0.64 0.55 0.068
2-3/4 2.7500 4-1/4 4.250 4.112 4.907 4.688 2-45/64 2.759 2.647 2.05 1.99 0.64 0.55 0.074
3 3.0000 4-5/8 4.625 4.475 5.340 5.102 2-61/64 3.013 2.893 2.23 2.17 0.71 0.62 0.081
3-1/4 3.2500 5 5.000 4.838 5.774 5.515 3-3/16 3.252 3.124 2.47 2.41 0.71 0.62 0.087
3-1/2 3.5000 5-3/8 5.375 5.200 6.207 5.928 3-7/16 3.506 3.370 2.72 2.65 0.71 0.62 0.094
3-3/4 3.7500 5-3/4 5.750 5.562 6.640 6.341 3-11/16 3.760 3.616 2.97 2.90 0.71 0.62 0.100
4 4.0000 6-1/8 6.125 5.925 7.073 6.755 3-15/16 4.014 3.862 3.22 3.15 0.71 0.62 0.107
L15
Fax 1.262.786.3530 www.americanboltcorp.com
Hex Castle Nuts
WF WC T UT SW
Nominal Width Unlostted
Diameter Width of
Width Across Flats Across Thickness Thickness and
Slots
Corners Height of Flats
Frac- Deci-
Basic Max Min Max Min Basic Max Min Nom Max Min Max Min
tional mal
1/4 0.2500 7/16 0.438 0.428 0.505 0.488 9/32 0.288 0.274 3/16 0.20 0.18 0.10 0.07
5/16 0.3125 1/2 0.500 0.489 0.577 0.557 21/64 0.336 0.320 15/64 0.24 0.22 0.12 0.09
3/8 0.3750 9/16 0.562 0.551 0.650 0.628 13/32 0.415 0.398 9/32 0.29 0.27 0.15 0.12
7/16 0.4375 11/16 0.688 0.675 0.794 0.768 29/64 0.463 0.444 19/64 0.31 0.29 0.15 0.12
1/2 0.5000 3/4 0.750 0.736 0.866 0.840 9/16 0.573 0.552 13/32 0.42 0.40 0.18 0.15
9/16 0.5625 7/8 0.875 0.861 1.010 0.982 39/64 0.621 0.598 27/64 0.43 0.41 0.18 0.15
5/8 0.6250 15/16 0.938 0.922 1.083 1.051 23/32 0.731 0.706 1/2 0.51 0.49 0.24 0.18
3/4 0.7500 1-1/8 1.125 1.088 1.299 1.240 13/16 0.827 0.798 9/16 0.57 0.55 0.24 0.18
7/8 0.8750 1-5/16 1.312 1.269 1.516 1.447 29/32 0.922 0.890 21/32 0.67 0.64 0.24 0.18
1 1.0000 1-1/2 1.500 1.450 1.732 1.653 1 1.018 0.982 23/32 0.73 0.70 0.30 0.24
1-1/8 1.1250 1-11/16 1.688 1.631 1.949 1,859 1-5/32 1.176 1.136 13/16 0.83 0.80 0.33 0.24
1-1/4 1.2500 1-7/8 1.875 1.812 2.165 2.066 1-1/4 1.272 1.228 7/8 0.89 0.86 0.40 0.31
1-3/8 1.3750 2-1/16 2.062 1.994 2.382 2.273 1-3/8 1.399 1.351 1 1.02 0.98 0.40 0.31
1-1/2 1.5000 2-1/4 2.250 2.175 2.598 2.480 1-1/2 1.526 1.474 1-1/16 1.08 1.04 0.46 0.37
R U
Nominal Radius Dia of
Diameter of Cylindrical
Fillet Part
Fractional ± .010 Min
1/4 0.094 0.371
5/16 0.094 0.425
3/8 0.094 0.478
7/16 0.094 0.582
1/2 0.125 0.637
9/16 0.156 0.744
5/8 0.156 0.797
3/4 0.188 0.941
7/8 0.188 1.097
1 0.188 1.254
1-1/8 0.250 1.411
1-1/4 0.250 1.570
1-3/8 0.250 1.726
L 1-1/2 0.250 1.881
F G G1 H
Nominal Size or Width Across Corners
Basic Thread Width Across Flats Thickness
Diameter Square Hex
Basic Max Min Max Min Max Min Max Min
2 0.0860 3/16 0.188 0.180 0.265 0.247 0.217 0.205 0.066 0.057
3 0.0990 3/16 0.188 0.180 0.265 0.247 0.217 0.205 0.066 0.057
4 0.1120 1/4 0.250 0.241 0.354 0.331 0.289 0.275 0.098 0.087
5 0.1250 5/16 0.312 0.302 0.442 0.415 0.361 0.344 0.114 0.102
6 0.1380 5/16 0.312 0.302 0.442 0.415 0.361 0.344 0.114 0.102
8 0.1640 11/32 0.344 0.332 0.486 0.456 0.397 0.378 0.130 0.117
10 0.1900 3/8 0.375 0.362 0.530 0.497 0.433 0.413 0.130 0.117
12 0.2160 7/16 0.438 0.423 0.619 0.581 0.505 0.482 0.161 0.148
1/4 0.2500 7/16 0.438 0.423 0.619 0.581 0.505 0.482 0.193 0.178
5/16 0.3125 9/16 0.562 0.545 0.795 0.748 0.650 0.621 0.225 0.208
3/8 0.3750 5/8 0.625 0.607 0.884 0.833 0.722 0.692 0.257 0.239
Regular Square
Nuts
Nominal or Basic F G H
Major Diameter of Width Across Flats Width Across Corners Thickness
Thread Basic Max Min Max Min Basic Max Min
1/4 0.2500 7/16 0.438 0.425 0.619 0.584 7/32 0.235 0.203
5/16 0.3125 9/16 0.562 0.547 0.795 0.751 17/64 0.283 0.249
3/8 0.3750 5/8 0.625 0.606 0.884 0.832 21/64 0.346 0.310
7/16 0.4375 3/4 0.750 0.728 1.061 1.000 3/8 0.394 0.356
1/2 0.5000 13/16 0.812 0.788 1.149 1.082 7/16 0.458 0.418
5/8 0.6250 1 1.000 0.969 1.414 1.330 35/64 0.569 0.525
3/4 0.7500 H/8 1.125 1.088 1.591 1.494 21/32 0.680 0.632
7/8 0.8750 1-5/16 1.312 1.269 1.856 1.742 49/64 0.792 0.740
1 1.0000 1-1/2 1.500 1.450 2.121 1.991 7/8 0.903 0.847
1-1/4 1.2500 1-7/8 1.875 1.812 2.652 2.458 1-3/32 1.126 1.062
1-1/2 1.5000 2-1/4 2.250 2.175 3.182 2.956 1-5/16 1.348 1.276
L17
Fax 1.262.786.3530 www.americanboltcorp.com
Wing Nuts
Cold Forged
Nominal Size A B C D E G
Threads
or Basic Major Wing Thick- Between Boss Diam-
per Wing Spread Wing Height Boss Height
Diameter of ness Wings eter
Inch
Thread Max Min Max Min Max Min Max Min Max Min Max Min
6 0.1380 32 0.72 0.59 0.41 0.28 0.11 0.07 0.21 0.17 0.33 0.29 0.14 0.10
8 0.1640 32 0.91 0.78 0.47 0.34 0.14 0.10 0.27 0.22 0.43 0.39 0.18 0.14
10 0.1900 24 & 32 0.91 0.78 0.47 0.34 0.14 0.10 0.27 0.22 0.45 0.39 0.18 0.14
1/4 0.2500 20 1.10 0.97 0.57 0.43 0.18 0.14 0.39 0.26 0.50 0.45 0.22 0.17
5/16 0.3125 18 1.25 1.12 0.66 0.53 0.21 0.17 0.39 0.32 0.58 0.51 0.25 0.20
3/8 0.3750 16 1.44 1.31 0.79 0.65 0.24 0.20 0.48 0.42 0.70 0.64 0.30 0.26
1/2 0.5000 13 1.94 1.81 1.00 0.87 0.33 0.26 0.65 0.54 0.93 0.86 0.39 0.35
5/8 0.6250 11 2.76 2.62 1.44 1.31 0.40 0.34 0.90 0.80 1.19 1.13 0.55 0.51
3/4 0.7500 10 2.76 2.62 1.44 1.31 0.40 0.34 0.90 0.80 1.19 1.13 0.55 0.51
Wing nuts
Stamped
Nominal Size A B C D E G H T
or Basic Wing Wing Wing Between Boss Boss Wall Stock
Threads
Major Spread Height Thickness Wings Diameter Height Height Thickness
per Inch
Diameter of
Thread Max Min Max Min Max Min Min Max Min Min Min Max Min
6 0.1380 32 0.78 0.72 0.40 0.34 0.18 0.14 0.25 0.41 0.35 0.08 0.12 0.04 0.03
8 0.1640 32 0.78 0.72 0.40 0.34 0.18 0.14 0.25 0.41 0.35 0.08 0.12 0.04 0.03
10 0.1900 24 & 32 0.91 0.85 0.47 0.41 0.21 0.17 0.34 0.53 0.47 0.10 0.12 0.04 0.03
1/4 0.2500 20 1.11 1.05 0.50 0.44 0.25 0.21 0.34 0.62 0.56 0.11 0.12 0.05 0.04
5/16 0.3125 18 & 24 1.30 1.24 0.59 0.53 0.30 0.26 0.46 0.73 0.67 0.14 0.18 0.06 0.05
3/8 0.3750 16 & 24 1.41 1.34 0.67 0.61 0.34 0.30 0.69 0.83 0.77 0.16 0.18 0.06 0.05
L18
www.americanboltcorp.com 1.800.588.1200
T-Nuts straight Barrel
G H F A T
Part LBS Per
Thread Size Flange Barrel Barrel Prong Material Drill Size
Number M Pcs.
Diameter Height Diameter Height Thickness
1005NT3 10-24 3/4 5/16 .243 7/32 .040 1/4 7
1005NT4 10-24 3/4 5/16 .243 7/32 .040 1/4 7
1105NT3 10-32 3/4 5/16 .243 7/32 .040 1/4 7
1105NT4 10-32 3/4 5/16 .243 7/32 .040 1/4 7
1405NT3 1/4-20 3/4 5/16 .305 7/32 .047 5/16 9
1405NT4 1/4-20 3/4 5/16 .305 7/32 .047 5/16 9
1407NT3 1/4-20 3/4 7/16 .305 5/16 .047 5/16 9
1407NT4 1/4-20 3/4 7/16 .305 1/4 .047 5/16 9
3106NT3 5/16-18 7/8 3/8 .390 1/4 .063 25/64 14
3106NT4 5/16-18 7/8 3/8 .390 1/4 .063 25/64 14
3110NT3 5/16-18 7/8 5/8 .390 5/16 .063 25/64 18
3707NT4 3/8-16 1 7/16 .440 11/32 .063 29/64 19
L19
Fax 1.262.786.3530 www.americanboltcorp.com
Two Piece Hex Cap Nuts
F G H
Nominal Size or Basic
Width Across
Major Width Across Flats Length
Corners
Diameter of Thread
Basic Max Min Max Min Basic Max Min
1/4 0.2500 3/8 0.375 0.365 0.433 0.416 3/4 0.76 0.74
5/16 0.3125 1/2 0.500 0.489 0.577 0.557 15/16 0.95 0.93
3/8 0.3750 9/16 0.562 0.551 0.650 0.628 1-1/8 1.13 1.11
1/2 0.5000 3/4 0.750 0.736 0.866 0.839 1-1/2 1.51 1.49
5/8 0.6250 15/16 0.938 0.922 1.083 1.051 1-7/8 1.89 1.86
3/4 0.7500 1-1/8 1.125 1.088 1.299 1.240 2-1/4 2.27 2.22
1 1.0000 1-/2 1.500 1.450 1.732 1.653 3 3.03 2.97
L20
www.americanboltcorp.com 1.800.588.1200
Nylon Insert Lock Nuts
See page B12 for Product Offerings
F H I G
Width
Nominal Size or Basic
Width Across Flats Thickness Side Height Across
Thread Diameter
Corners
Basic Max Min Max Min Ref Ref
4 0.1120 1/4 0.251 0.241 0.153 0.133 0.081 0.268
6 0.1380 5/16 0.313 0.302 0.188 0.168 0.103 0.399
8 0.1640 11/32 0.345 0.332 0.239 0.219 0.140 0.374
10 0.1900 3/8 0.376 0.362 0.249 0.229 0.140 0.410
1/4 0.2500 7/16 0.439 0.428 0.328 0.298 0.225 0.482
5/16 0.3125 1/2 0.502 0.489 0.359 0.329 0.250 0.552
3/8 0.3750 9/16 0.565 0.551 0.468 0.438 0.335 0.622
7/16 0.4375 11/16 0.690 0.675 0.468 0.438 0.324 0.698
1/2 0.5000 3/4 0.752 0.736 0.609 0.579 0.464 0.837
9/16 0.5625 7/8 0.877 0.861 0.656 0.626 0.469 0.978
5/8 0.6250 15/16 0.940 0.922 0.765 0.735 0.593 1.051
3/4 0.7500 1-1/8 1.127 1.088 0.890 0.860 0.742 1.191
7/8 0.8750 1-5/16 1.315 1.269 0.999 0.969 0.790 1.430
1 1.0000 1-1/2 1.502 1.450 1.078 1.061 0.825 1.615
1-1/8 1.1250 1-11/16 1.690 1.631 1.203 1.141 0.930 1.826
1-114 1.2500 1-7/8 1.877 1.812 1.422 1.360 1.125 2.038
1-1/2 1.5000 2-114 2.252 2.175 1.640 1.578 1.313 2.444
Thin Pattern
F H I G
Nominal Size or Width
Side
Basic Thread Width Across Flats Thickness Across
Height
Diameter Corners
Basic Max Min Max Min Ref Ref
4 .1120 1/4 .251 .241 .124 .094 .075 .268
6 .1380 5/16 .313 .302 .140 .110 .090 .399
8 .1640 11/32 .345 .332 .187 .157 .110 .374
10 .1900 3/8 .376 .362 .187 .157 .110 .410
1/4 .2500 7/16 .439 .428 .218 .188 .125 .482
5/16 .3125 1/2 .502 .489 .265 .235 .158 .552
3/8 .3750 9/16 .565 .551 .281 .251 .150 .622
7/16 .4375 11/16 .690 .675 .328 .298 .190 .694
1/2 .5000 3/4 .752 .736 .328 .298 .225 .837
5/8
3/4
.6250
.7500
15/16
1-1/8
.940
1.127
.922
1.088
.406
.421
.376
.391
.264
.288
1.051
1.191
L
See page B13 for Product Offerings
L21
Fax 1.262.786.3530 www.americanboltcorp.com
Heavy Nylon Insert Lock Nuts
F H I G
Nominal or
Side Width
Basic Major Width Across Thin Pattern Side
Thickness Height Across
Diameter of Flats Thickness Height
(Thin) Corners
Thread
Max Min Max Min Max Min Ref Ref Max
1/4 0.2500 0.503 0.489 0.390 0.360 0.296 0.266 0.290 0.194 0.556
5/16 0.3125 0.566 0.551 0.453 0.423 0.328 0.298 0.335 0.212 0.624
3/8 0.3750 0.691 0.675 0.562 0.532 0.421 0.391 0.392 0.251 0.763
7/16 0.4375 0.754 0.736 0.609 0.579 0.453 0.423 0.464 0.316 0.829
1/2 0.5000 0.879 0.861 0.718 0.688 0.546 0.516 0.544 0.360 0.969
5/8 0.6250 1.067 1.045 0.874 0.844 0.624 0.594 0.677 0.428 1.175
3/4 0.7500 1.255 1.231 1.015 0.985 0.718 0.688 0.790 0.488 1.382
7/8 0.8750 1.444 1.417 1.140 1.110 0.796 0.766 0.883 0.535 1.589
1 1.0000 1.632 1.602 1.312 1.250 0.922 0.860 1.000 0.600 1.796
L22
www.americanboltcorp.com 1.800.588.1200
Serrated Flange Lock Nuts
F G B H K J
Nominal Size or
Wrench- Flange
Basic Major Width Across Width Across Flange
Nut Thickness ing Thick-
Diameter of Flats Corners Diameter
Length ness
Thread
Max Min Max Min Max Min Max Min Max Min
6 0.1380 0.312 0.302 0.361 0.342 0.422 0.406 0.171 0.156 0.10 0.02
8 0.1640 0.344 0.334 0.397 0.381 0.469 0.452 0.203 0.187 0.13 0.02
10 0.1900 0.375 0.365 0.433 0.416 0.500 0.480 0.219 0.203 0.13 0.03
12 0.2160 0.438 0.428 0.505 0.488 0.594 0.574 0.236 0.222 0.14 0.04
1/4 0.2500 0.438 0.428 0.505 0.488 0.594 0.574 0.236 0.222 0.14 0.04
5/16 0.3125 0.500 0.489 0.577 0.557 0.680 0.660 0.283 0.268 0.17 0.04
3/8 0.3750 0.562 0.551 0.650 0.628 0.750 0.728 0.347 0.330 0.23 0.04
7/16 0.4375 0.688 0.675 0.794 0.768 0.937 0.910 0.395 0.375 0.26 0.04
1/2 0.5000 0.750 0.736 0.866 0.840 1.031 1.000 0.458 0.437 0.31 0.05
5/8 0.6250 0.938 0.922 1.083 1.051 1.281 1.248 0.569 0.545 0.40 0.05
3/4 0.7500 1.125 1.088 1.299 1.240 1.500 1.460 0.675 0.627 0.46 0.06
F G H I
Nominal Size or Width Across
Corners Washer
Basic Major Di- Width Across Flats Thickness
Diameter
ameter of Thread Hex
Basic Max Min Max Min Max Min Ref
#4 0.1120 1/4 0.250 0.241 0.289 0.275 0.098 0.087 0.281
#6 0.1380 5/16 0.312 0.302 0.361 0.344 0.114 0.102 0.344
#8 0.1640 11/32 0.344 0.332 0.397 0.378 0.130 0.117 0.375
#10 0.1900 3/8 0.375 0.362 0.433 0.413 0.130 0.117 0.406
1/4 0.2500 7/16 0.438 0.423 0.505 0.482 0.193 0.178 0.500
5/16 0.3125 1/2 0.500 0.489 0.577 0.557 0.273 0.258 0.578
3/8 0.3750 9/16 0.562 0.551 0.650 0.628 0.385 0.365 0.656 L
See page B17 for Product Offerings
L23
Fax 1.262.786.3530 www.americanboltcorp.com
Stover Lock Nuts (Unitorque)
Grade C Automation Style
T W B
Nominal
Hex
Size In Width Across Flats Overall Thickness
Height
Inches
Nom Max Min Max Min Min
1/4 7/16 0.4385 0.428 0.226 0.212 0.145
5/16 1/2 0.5020 0.489 0.273 0.258 0.166
3/8 9/16 0.5645 0.551 0.337 0.320 0.198
7/16 11/16 0.6895 0.675 0.385 0.365 0.223
1/2 3/4 0.7520 0.736 0.448 0.427 0.262
9/16 7/8 0.8770 0.861 0.496 0.473 0.286
5/8 15/16 0.9395 0.922 0.559 0.535 0.329
3/4 1-1/8 1.1270 1.088 0.665 0.617 0.382
7/8 1-5/16 1.3145 1.2690 0.776 0.724 0.450
1 1-1/2 1.5020 1.4500 0.887 0.831 0.513
Flange Unitorque
F B H A K
Nominal
Flange Flange
Size In Width Across Flats Overall Thickness Hex Height
Diameter Thickness
Inches
Nom Max Min Max Max Min Min Min
3/8 9/16 0.5645 0.551 0.810 0.425 0.404 0.200 0.060
1/2 3/4 0.7520 0.736 1.070 0.555 0.528 0.260 0.080
5/8 15/16 0.9395 0.922 1.330 0.690 0.646 0.320 0.100
3/4 1-1/8 1.1270 1.088 1.585 0.825 0.742 0.380 0.110
L24
www.americanboltcorp.com 1.800.588.1200
Flat Washers
ID OD T
Nominal Diameter Inside Diameter Outside Diameter Thickness Approx
Tolerance Tolerance No/Pcs
Frac- Basic Basic Basic Max Min Per Lb
Decimal Plus Minus Plus Minus
tional
- - 0.078 0.000 0.005 0.188 0.000 0.005 0.020 0.025 0.016
- - 0.094 0.000 0.005 0.250 0.000 0.005 0.020 0.025 0.016
#4 0.112 0.125 0.008 0.005 0.312 0.008 0.005 0.032 0.040 0.025 1650
#6 0.138 0.156 0.008 0.005 0.375 0.Q15 0.005 0.049 0.065 0.036 790
#8 0.164 0.188 0.008 0.005 0.438 0.015 0.005 0.049 0.065 0.036 585
#10 0.190 0.219 0.008 0.005 0.500 0.015 0.005 0.049 0.065 0.036 435
3/16 0.188 0.250 0.015 0.005 0.562 0.015 0.005 0.049 0.065 0.036 361
#12 0.216 0.250 0.015 0.005 0.562 0.015 0.005 0.065 0.080 0.051 280
1/4 0.250 N 0.281 0.015 0.005 0.625 0.015 0.005 0.065 0.080 0.051 222
1/4 0.250 W 0.312 0.015 0.005 0:734 0.015 0.007 0.065 0.080 0.051 149
5/16 0.312 N 0.344 0.015 0.005 0.688 0.015 0.007 0.065 0.080 0.051 192
5/16 0.312 W 0.375 0.015 0.005 0.875 0.030 0.007 0.083 0.104 0.064 87
3/8 0.375 N 0.406 0.015 0.005 0.812 0.015 0.007 0.065 0.080 0.051 140
3/8 0.375 W 0.438 0.015 0.005 1.000 0.030 0.007 0.083 0.104 0.064 67
7/16 0.438 N 0.469 0.015 0.005 0.922 0.Q15 0.007 0.065 0.080 0.051 105
7/16 0.438 W 0.500 0.015 0.005 1.250 0.030 0.007 0.083 0.104 0.064 41
1/2 0.500 N 0.531 0.015 0.005 1.062 0.030 0.007 0.095 0.121 0.074 55
1/2 0.500 W 0.562 0.Q15 0.005 1.375 0.030 0.007 0.109 0.132 0.086 26
9/16 0.562 N 0.594 0.015 0.005 1.156 0.030 0.007 0.095 0.121 0.074 43
9/16 0.562 W 0.625 0.015 0.005 1.469 0.030 0.007 0.109 0.132 0.086 22
L25
Fax 1.262.786.3530 www.americanboltcorp.com
Flat Washers
ID OD T
Nominal Diameter Inside Diameter Outside Diameter Thickness Approx
Tolerance Tolerance No/Pcs
Frac- Basic Basic Basic Max Min Per Lb
Decimal Plus Minus Plus Minus
tional
5/8 0.625 N 0.656 0.030 0.007 1.312 0.030 0.007 0.095 0.121 0.074 36
5/8 0.625 W 0.688 0.030 0.007 1.750 0.030 0.007 0.134 0.160 0.108 13
3/4 0.750 N 0.812 0.030 0.007 1.469 0.030 0.007 0.134 0.160 0.108 21
3/4 0.750 W 0.812 0.030 0.007 2.000 0.030 0.007 0.148 0.177 0.122 9.1
7/8 0.875 N 0.938 0.030 0.007 1.750 0.030 0.007 0.134 0.160 0.108 16
7/8 0.875 W 0.938 0.030 0.007 2.250 0.030 0.007 0.165 0.192 0.136 6.5
1 1.000 N 1.062 0.030 0.007 2.000 0.030 0.007 0.134 0.160 0.108 12
1 1.000 W 1.062 0.030 0.007 2.500 0.030 0.007 0.165 0.192 0.136 5.3
1-1/8 1.125 N 1.250 0.030 0.007 2.250 0.030 0.007 0.134 0.160 0.108 9.2
1-1/8 1.125 W 1.250 0.030 0.007 2.750 0.030 0.007 0.165 0.192 0.136 4.5
1-1/4 1.250 N 1.375 0.030 0.007 2.500 0.030 0.007 0.165 0.192 0.136 6.25
1-1/4 1.250 W 1.375 0.030 0.007 3.000 0.030 0.007 0.165 0.192 0.136 3.8
1-3/8 1.375 N 1.500 0.030 0.007 2.750 0.030 0.007 0.165 0.192 0.136 5.25
1-3/8 1.375 W 1.500 0.045 0.010 3.250 0.045 0.010 0.180 0.213 0.153 3
1-1/2 1.500 N 1.625 0.030 0.007 3.000 0.030 0.007 0.165 0.192 0.136 4.25
1-1/2 1.500 W 1.625 0.045 0.010 3.500 0.045 0.010 0.180 0.213 0.153 2.6
1-5/8 1.625 1.750 0.045 0.010 3.750 0.045 0.010 0.180 0.213 0.153 2.3
1-3/4 1.750 1.875 0.045 0.010 4.000 0.045 0.010 0.180 0.213 0.153 2
1-7/8 1.875 2.000 0.045 0.010 4.250 0.045 0.010 0.180 0.213 0.153 1.8
2 2.000 2.125 0.045 0.010 4.500 0.045 0.010 0.180 0.213 0.153 1.6
2-1/4 2.250 2.375 0.045 0.010 4.750 0.045 0.010 0.220 0.248 0.193 1.2
2-1/2 2.500 2.625 0.045 0.010 5.000 0.045 0.010 0.238 0.280 0.210 1
2-3/4 2.750 2.875 0.065 0.010 5.250 0.065 0.010 0.259 0.310 0.228 .9
3 3.000 3.125 0.065 0.010 5.500 0.065 0.010 0.284 0.327 0.249 .8
N = SAE Pattern (Narrow)
W = USS Pattern (Wide)
L26
www.americanboltcorp.com 1.800.588.1200
Direct Tension Indicating Washers
OD ID TH P
Protrusion Compression Load
Outside Inside Number of Range (lbs.)
Thickness Tangential
Nominal Diameter Diameter Protrusions
Diameter
Size (equally
With With spaced)
Max Min Max Min Protrusion Protrusion Max Max Min
Max Min
1/2 1.187 1.167 0.527 0.523 0.180 0.104 0.788 4 14,000 12,000
5/8 1.375 1.355 0.658 0.654 0.220 0.126 0.956 4 23,000 19,000
3/4 1.625 1.605 0.790 0.786 0.230 0.126 1.125 5 34,000 28,000
7/8 1.875 1.855 0.921 0.917 0.240 0.142 1.294 5 47,000 39,000
1 2.000 1.980 1.052 1.048 0.270 0.158 1.463 6 61,000 51,000
1-1/8 2.250 2.230 1.183 1.179 0.270 0.158 1.631 6 67,000 56,000
1-1/4 2.500 2.480 1.315 1.311 0.270 0.158 1.800 7 85,000 71,000
1-3/8 2.750 2.730 1.446 1.442 0.270 0.158 1.969 7 102,000 85,000
1-1/2 3.000 2.980 1.577 1.573 0.270 0.158 2.138 8 124,000 103,000
L27
Fax 1.262.786.3530 www.americanboltcorp.com
Medium Spring (Regular)
Lock Washers
T1+T2
ID OD W
2
Nominal Diameter
Inside Outside Washer Section
Diameter Diameter Width Thickness
Fractional Decimal Max Min Max 2 Min Min
#2 0.086 0.088 0.094 0.172 0.035 0.020
#3 0.099 0.101 0.107 0.195 0.040 0.025
#4 0.112 0.115 0.121 0.209 0.040 0.025
#5 0.125 0.128 0.134 0.236 0.057 0.031
#6 0.138 0.141 0.148 0.250 0.047 0.031
#8 0.164 0.168 0.175 0.293 0.055 0.040
#10 0.190 0.194 0.202 0.334 0.062 0.047
#12 0.216 0.221 0.229 0.377 0.070 0.056
1/4 0.250 0.255 0.263 0.489 0.109 0.062
5/16 0.312 0.318 0.328 0.586 0.125 0.078
3/8 0.375 0.382 0.393 0.683 0.141 0.094
7/16 0.438 0.446 0.459 0.779 0.156 0.109
1/2 0.500 0.509 0.523 0.873 0.171 0.125
9/16 0.562 0.572 0.587 0.971 0.188 0.141
5/8 0.625 0.636 0.653 1.079 0.203 0.156
11/16 0.688 0.700 0.718 1.176 0.219 0.172
3/4 0.750 0.763 0.783 1.271 0.234 0.188
13/16 0.812 0.826 0.847 1.367 0.250 0.203
7/8 0.875 0.890 0.912 1.464 0.266 0.219
15/16 0.938 0.954 0.978 1.560 0.281 0.234
1 1.000 1.017 1.042 1.661 0.297 0.250
1-1/16 1.062 1.080 1.107 1.756 0.312 0.266
1-1/8 1.125 1.144 1.172 1.853 0.328 0.281
1-3/16 1.188 1.208 1.237 1.950 0.344 0.297
1-1/4 1.250 1.271 1.302 2.045 0.359 0.312
1-5/16 1.312 1.334 1.366 2.141 0.375 0.328
1-3/8 1.375 1.398 1.432 2.239 0.391 0.344
1-7/16 1.438 1.462 1.497 2.334 0.406 0.359
1-1/2 1.500 1.525 1.561 2.430 0.422 0.375
L28
www.americanboltcorp.com 1.800.588.1200
CounterSunk Finishing Washers
Screw ID
OD
Size Min Max
#6 .469 .170 .200
#8 .531 .180 .210
#10 .593 .235 ,265
#12 .656 .259 .289
1/4 .781 .305 .335
T+t
A B W
2
Nominal Washer Size Outside Washer Section
Inside Diameter
Diameter Width Thickness
Min Max Max Min Min
#4 0.112 0.115 0.121 0.173 0.022 0.022
#6 0.138 0.141 0.148 0.216 0.030 0.030
#8 0.164 0.168 0.175 0.267 0.042 0.047
#10 0.190 0.194 0.202 0.294 0.042 0.047
1/4 0.250 0.255 0.263 0.365 0.047 0.078
5/16 0.312 0.318 0.238 0.460 0.062 0.093
3/8 0.375 0.382 0.393 0.533 0.076 0.125
L29
Fax 1.262.786.3530 www.americanboltcorp.com
Tooth Lock Washers
Internal Tooth
A B C
Nominal Washer
Inside Diameter Outside Diameter Thickness
Size
Min Max Max Min Max Min
#2 0.086 0.089 0.095 0.200 0.175 0.015 0.010
#4 0.112 0.115 0.123 0.270 0.255 0.019 0.015
#6 0.138 0.141 0.150 0.295 0.275 0.021 0.017
#8 0.164 0.168 0.176 0.340 0.325 0.023 0.018
#10 0.190 0.195 0.204 0.381 0.365 0.025 0.020
#12 0.216 0.221 0.231 0.410 0.394 0.025 0.020
1/4 0.250 0.256 0.267 0.478 0.460 0.028 0.023
5/16 0.312 0.320 0.332 0.610 0.594 0.034 0.028
3/8 0.375 0.384 0.398 0.692 0.670 0.040 0.032
7/16 0.438 0.448 0.464 0.789 0.740 0.040 0.032
1/2 0.500 0.512 0.530 0.900 0.867 0.045 0.037
5/8 0.625 0.640 0.663 1.071 1.045 0.050 0.042
External Tooth
A B C
Nominal Washer
Inside Diameter Outside Diameter Thickness
Size
Min Max Max Min Max Min
#4 0.112 0.115 0.123 0.260 0.245 0.019 0.015
#6 0.138 0.141 0.150 0.320 0.305 0.022 0.016
#8 0.164 0.168 0.176 0.381 0.365 0.023 0.018
#10 0.190 0.195 0.204 0.410 0.395 0.025 0.020
#12 0.216 0.221 0.231 0.475 0.460 0.028 0.023
1/4 0.250 0.256 0.267 0.510 0.494 0.028 0.023
5/16 0.312 0.320 0.332 0.610 0.588 0.034 0.028
3/8 0.375 0.384 0.398 0.694 0.670 0.040 0.032
7/16 0.438 0.448 0.464 0.760 0.740 0.040 0.032
1/2 0.500 0.513 0.530 0.900 0.880 0.045 0.037
5/8 0.625 0.641 0.663 1.070 1.045 0.050 0.042
Internal-External Tooth
A B C
Nominal Washer
Inside Diameter Outside Diameter Thickness
Size
Min Max Max Min Max Min
#6 0.138 0.141 0.150 0.510 0.495 0.028 0.023
#8 0.164 0.168 0.176 0.510 0.495 0.028 0.023
#10 0.190 0.195 0.204 0.610 0.580 0.034 0.028
L 1/4 0.250 0.256 0.267 0.760 0.725 0.040 0.032
Machine Screws
Nominal Screw Size 0 thur 12 1/4 thru 3/4
Nominal Screw Length Tolerance on Length
Up to 1/2 in. ±0.02 ±0.03
1/2 to 1 in. ±0.03 ±0.03
1 to 2 in. ±0.06 ±0.06
Over 2 in. ±0.09 ±0.09
Type A -AB
Nominal Screw Length Tolerance on Length
Up to 1 in. ±0.03
Over 1 in. ±0.05
Type U
Nominal Screw Length Tolerance on Length
Up to 3/8 in. ±0.02
Over 3/8 in. ±0.03
Wood Screws
Nominal Screw Length Tolerance on Length
Up to 5/8 in. ±0.03
5/8 to 1-1/2 in. ±0.05
1-1/2 to 2-3/4 ±0.06
2-3/4 to 5 ±0.059
L
L31
Fax 1.262.786.3530 www.americanboltcorp.com
Slotted Round Head Machine Screws
HD H SW SD
Nominal Diameter
Head Diameter Head Height Slot Width Slot Depth
Fractional Decimal Max Min Max Min Max Min Max Min
#0000 0.0210 0.041 0.035 0.022 0.016 0.008 0.004 0.017 0.013
#000 0.0340 0.062 0.056 0.031 0.025 0.012 0.008 0.018 0.012
#00 0.0470 0.089 0.080 0.045 0.036 0.017 0.010 0.026 0.018
#0 0.0600 0.113 0.099 0.053 0.043 0.023 0.016 0.039 0.029
#1 0.0730 0.138 0.122 0.061 0.051 0.026 0.019 0.044 0.033
#2 0.0860 0.162 0.146 0.069 0.059 0.031 0.023 0.048 0.037
#3 0.0990 0.187 0.169 0.078 0.067 0.035 0.027 0.053 0.040
#4 0.1120 0.211 0.193 0.086 0.075 0.039 0.031 0.058 0.044
#5 0.1250 0.236 0.217 0.095 0.083 0.043 0.035 0.063 0.047
#6 0.1380 0.260 0.240 0.103 0.091 0.048 0.039 0.068 0.051
#8 0.1640 0.309 0.287 0.120 0.107 0.054 0.045 0.077 0.058
#10 0.1900 0.359 0.334 0.137 0.123 0.060 0.050 0.087 0.065
#12 0.2160 0.408 0.382 0.153 0.139 0.067 0.056 0.096 0.073
1/4 0.2500 0.472 0.443 0.175 0.160 0.075 0.064 0.109 0.082
5/16 0.3125 0.590 0.557 0.216 0.198 0.084 0.072 0.132 0.099
3/8 0.3750 0.708 0.670 0.256 0.237 0.094 0.081 0.155 0.117
7/16 0.4375 0.750 0.707 0.328 0.307 0.094 0.081 0.196 0.148
1/2 0.5000 0.813 0.766 0.355 0.332 0.106 0.091 0.211 0.159
9/16 0.5625 0.938 0.887 0.410 0.385 0.118 0.102 0.242 0.183
5/8 0.6250 1.000 0.944 0.438 0.411 0.133 0.116 0.258 0.195
3/4 0.7500 1.250 1.185 0.547 0.516 0.149 0.131 0.320 0.242
L32
www.americanboltcorp.com 1.800.588.1200
Slotted Flat Head Machine Screws
L HD H SW SD F G
Nominal Head Diameter Protrusion
These Head
Diameter Lengths Slot Width Slot Depth Above Gaging
Min Height
or Max Diameter Gaging
Shorter Edge Dia
Edge
Frac- are Round
Decimal Sharp Ref Max Min Max Min Max Min
tional Undercut or Flat
L33
Fax 1.262.786.3530 www.americanboltcorp.com
Binding Head Under Cut
Machine Screws
A F O J T U X
Nominal Head Height of Head Dimensions of Undercut
Width of Slot Depth of Slot
Size Diameter Hgt. of Oval Total Hgt. Diameter Depth
Max Min Max Min Max Min Max Min Max Min Max Min Max Min
#2 .181 .171 .018 .013 .050 .043 .031 .023 .030 .024 .141 .124 .010 .005
#3 .208 .197 .022 .016 .059 .052 .035 .027 .036 .025 .162 .143 .011 .006
#4 .235 .223 .025 .018 .068 .061 .039 .031 .042 .034 .184 .161 .012 .007
#5 .263 .249 .029 .021 .078 .069 .043 .035 .048 .035 .205 .180 .014 .009
#6 .290 .275 .032 .024 .087 .078 .048 .039 .053 .044 .226 .199 .015 .010
#8 .344 .326 .039 .029 .105 .095 .054 .045 .065 .054 .269 .236 .017 .012
#10 .399 .378 .045 .034 .123 .112 .060 .050 .077 .064 .312 .274 .020 .015
1/4 .513 .488 .061 .046 .165 .152 .075 .064 .105 .088 .410 .360 .026 .021
Fillister Head
Machine Screws
A H O J T M G N
Nominal Head of Height of Head Width of Depth of Dimensions of Recess
Size Diameter Side Height Total Height Slot Slot Diameter Depth Width
Max Min Max Min Max Min Max Min Max Min Max Min Max Min
#2 .140 .124 .062 .053 .083 .066 .031 .023 .037 .025 .104 .091 .059 .017
#3 .161 .145 .070 .061 .095 .077 .035 .027 .043 .030 .112 .099 .068 .019
#4 .183 .166 .079 .069 .107 .088 .039 .031 .048 .035 .122 .109 .078 .019
#5 .205 .187 .088 .078 .120 .100 .043 .035 .054 .040 .143 .130 .067 .027
#6 .226 .208 .096 .086 .132 .111 .048 .039 .060 .045 .166 .153 .091 .028
#8 .270 .250 .113 .102 .156 .133 .054 .045 .071 .054 .182 .169 .108 .030
#10 .313 .292 .130 .118 .180 .156 .060 .050 .083 .064 .199 .186 .124 .031
#12 .357 .334 .148 .134 .205 .178 .067 .056 .094 .074 .259 .246 .141 .034
1/4 .414 .389 .170 .155 .237 .207 .075 .064 .109 .087 .281 .268 .161 .036
5/16 .518 .490 .211 .194 .295 .262 .084 .072 .137 .110 .322 .309 .203 .042
3/8 .622 .590 .253 .233 .355 .315 .094 .081 .164 .133 .389 .376 .233 .065
L34
www.americanboltcorp.com 1.800.588.1200
Flat Head UnderCut
Machine Screws
Tapping Screws
L A H J T M G N
A W H F U J T
Width
Nom Width Across Diameter of Thickness of
Across Height of Head Width of Slot Depth of Slot
Size Flats Washer Washer
Corners
Max Min Min Max Min Max Min Max Min Max Min Max Min
#4 .187 .181 .202 .060 .049 .243 .225 .019 .011 .039 .031 .042 .025
#6 .250 .244 .272 .093 .080 .328 .302 .025 .015 .048 .039 .053 .033
#7 .250 .244 .272 .093 .080 .328 .302 .029 .017 .048 .039 .062 .040
#8 .250 .244 .272 .110 .096 .348 .322 .031 .019 .054 .045 .074 .052
#10 .312 .305 .340 .120 .105 .414 .384 .031 .019 .060 .050 .080 .057
#12 .312 .305 .340 .155 .139 .432 .398 .039 .022 .067 .056 .103 .077
#14 .438 .428 .409 .190 .172 .520 .480 .050 .030 .075 .064 .111 .083
1/4 .375 .367 .409 .190 .172 .520 .480 .050 .030 .075 .064 .111 .083
5/16 .500 .489 .545 .230 .208 .676 .624 .055 .035 .084 .072 .134 .100
3/8 .562 .551 .614 .295 .270 .780 .720 .063 .037 .094 .081 .168 .131
L
L35
Fax 1.262.786.3530 www.americanboltcorp.com
Oval HEad
Machine Screws
Tapping Screws
Wood Screws
A H O J T M G N
Nom Head Height of Head Width of Dimensions of Recess
Depth of slot
Size Diameter Side Height Total Height Slot Diameter Depth Width
Max Min Max Min Max Min Max Min Max Min Max Min Max Min
#4 .225 .195 .067 .054 .104 .084 .039 .031 .059 .049 .136 .123 .094 .019
#5 .252 .220 .075 .062 .116 .095 .043 .035 .067 .055 .158 .145 .085 .028
#6 .279 .244 .083 .069 .128 .105 .048 .039 .074 .060 .178 .165 .105 .030
#8 .332 .292 .100 .084 .152 .126 .054 .045 .088 .072 .192 .179 .119 .031
#9 .358 .316 .108 .091 .164 .137 .054 .045 .095 .078 .216 .203 .144 .034
#10 .385 .340 .116 .098 .176 .148 .060 .050 .103 .084 .209 .196 .137 .033
#12 .438 .389 .132 .112 .200 .169 .067 .056 .117 .096 .270 .257 .152 .038
#14 .491 .452 .148 .127 .224 .190 .075 .064 .132 .108 .305 .292 .188 .042
1/4 .507 .452 .153 .131 .232 .197 .075 .064 .136 .112 .290 .277 .173 .040
Pan Head
Machine Screws
Tapping Screws
Self Drilling Screws
A H H1 J T M G N
Nom Head Height of Head Width of Dimensions of Recess
Depth of slot
Size Diameter Slotted Recessed Slot Diameter Depth Width
Max Min Max Min Max Min Max Min Max Min Max Min Max Min
#2 .167 .155 .053 .045 .062 .053 .031 .023 .031 .022 .104 .091 .059 .017
#3 .193 .180 .060 .051 .071 .062 .035 .027 .036 .026 .112 .099 .068 .019
#4 .219 .205 .068 .058 .080 .070 .039 .031 .040 .030 .122 .109 .078 .019
#5 .245 .231 .075 .065 .089 .079 .043 .035 .045 .034 .158 .145 .083 .028
#6 .270 .256 .082 .072 .097 .087 .048 .039 .050 .037 .166 .153 .091 .028
#7 .296 .281 .089 .079 .106 .096 .048 .039 .054 .041 .176 .163 .100 .029
#8 .322 .306 .096 .085 .115 .105 .054 .045 .058 .045 .182 .169 .108 .030
#10 .373 .357 .110 .099 .133 .122 .060 .050 .068 .053 .199 .186 .124 .031
#12 .425 .407 .125 .112 .151 .139 .067 .056 .077 .061 .259 .246 .141 .034
1/4 .492 .473 .144 .130 .175 .162 .075 .064 .087 .070 .281 .268 .161 .036
5/16 .615 .594 .178 .162 .218 .203 .084 .072 .106 .085 .350 .337 .193 .169
3/8 .740 .716 .212 .195 .261 .244 .094 .081 .124 .100 .389 .376 .233 .210
L
L36
www.americanboltcorp.com 1.800.588.1200
Truss Head
Machine Screws
Tapping Screws
A H J T M G N
Nom Head Dimensions of Recess
Height of Head Width of Slot Depth of slot
Size Diameter Diameter Depth Width
Max Min Max Min Max Min Max Min Max Min Max Min
#4 .257 .241 .069 .059 - - - - .112 .099 .069 .017
#6 .321 .303 .086 .074 .048 .039 .050 .037 .158 .145 .084 .027
#8 .384 .364 .102 .088 .054 .045 .058 .045 .173 .160 .099 .029
#10 .448 .425 .118 .103 .060 .050 .068 .053 .188 .175 .115 .030
1/4 .573 .546 .150 .133 .075 .064 .087 .070 .263 .250 .143 .033
5/16 .698 .666 .183 .162 .084 .072 .106 .085 .352 .339 .193 .059
3/8 .823 .787 .215 .191 .094 .081 .124 .100 - - - -
Round Head
Wood Screws
A H J T M G N
Nom Head Dimensions of Recess
Height of Head Width of Slot Depth of slot
Size Diameter Diameter Depth Width
Max Min Max Min Max Min Max Min Max Min Max Min
#2 .162 .146 .069 .059 .031 .023 .048 .037 .100 .087 .053 .017
#3 .187 .169 .078 .067 .035 .027 .053 .040 .109 .096 .062 .018
#4 .211 .193 .086 .075 .039 .031 .058 .044 .118 .105 .072 .019
#5 .236 .217 .095 .083 .043 .035 .063 .047 .154 .141 .074 .027
#6 .260 .240 .103 .091 .048 .039 .068 .051 .162 .149 .084 .027
#7* .285 .264 .111 .099 .048 .039 .072 .055 .170 .157 .092 .029
#8 .309 .287 .120 .107 .054 .045 .077 .058 .178 .165 .101 .030
#9* .334 .311 .128 .115 .054 .045 .082 .062 .186 .173 .110 .030
#10 .359 .334 .137 .123 .060 .050 .087 .065 .195 .182 .119 .031
#12 .408 .382 .153 .139 .067 .056 .096 .072 .249 .236 .125 .032
#14* .457 .429 .170 .155 .075 .064 .106 .080 .265 .252 .142 .034
1/4 .472 .443 .175 .160 .075 .064 .109 .082 .268 .255 .147 .034
5/16 .590 .557 .216 .198 .084 .072 .132 .099 - - - -
3/8 .708 .670 .256 .237 .094 .081 .155 .117 - - - -
1/2 .813 .766 .355 .332 .106 .091 .211 .159 - - - -
L
L37
Fax 1.262.786.3530 www.americanboltcorp.com
Threads for self tapping screws
Type A
Nominal D d L
Size or Threads per These Lengths or Shorter
Major Diameter Minor Diameter
Basic Screw Inch Have AB Threads
Diameter Max Min Max Min 90° Heads Csk Heads
#6 0.139 18 0.141 0.136 0.102 0.096 1/4 5/16
#7 0.155 16 0.158 0.152 0.114 0.108 5/16 3/8
#8 0.165 15 0.168 0.162 0.123 0.116 3/8 7/16
#10 0.192 12 0.194 0.188 0.133 0.126 3/8 1/2
#12 0.218 11 0.221 0.215 0.162 0.155 7/16 9/16
#14 0.252 10 0.254 0.248 0.185 0.178 1/2 5/8
#20 0.330 9 0.333 0.327 0.234 0.226 11/16 13/16
#24 0.385 9 0.390 0.383 0.291 0.282 3/4 1
Type AB
Nominal D d L
Size or Threads per Minimum Practical Screw
Major Diameter Minor Diameter
Basic Screw Inch Lengths
Diameter Max Min Max Min 90° Heads Csk Heads
#4 0.1120 24 0.114 0.110 0.086 0.082 3/16 7/32
#6 0.1380 20 0.139 0.135 0.104 0.099 7/32 17/64
#8 0.1640 18 0.166 0.161 0.122 0.116 9/32 21/64
#10 0.1900 16 0.189 0.183 0.141 0.135 21/64 3/8
#12 0.2160 14 0.215 0.209 0.164 0.157 3/8 13/32
1/4 0.2500 14 0.246 0.240 0.192 0.185 13/32 15/32
5/16 0.3125 12 0.315 0.306 0.244 0.236 5/8 3/4
3/8 0.3750 12 0.380 0.371 0.309 0.299 3/8 29/32
L38
www.americanboltcorp.com 1.800.588.1200
Threads for self tapping screws
Type 25 Type B
D d P S L
Determinant Minimum
Nominal Point Taper Length Length for Practical
Thrds
Size or Major Minor Point Point Taper Screw Length
per
Basic Screw Diameter Diameter Diameter
Inch For Short For Long
Diameter 90° Csk 90° Csk
Screws Screws
Heads Heads Heads Heads
Max Min Max Min Max Min Max Min Max Min
#2 0.0860 32 0.088 0.084 0.064 0.060 0.058 0.054 0.062 0.047 0.078 0.062 7/64 3/16 7/64 5/32
#4 0.1120 24 0.114 0.110 0.086 0.082 0.079 0.074 0.083 0.063 0.104 0.083 3/16 1/4 9/64 3/16
#6 0.1380 20 0.139 0.135 0.104 0.099 0.095 0.089 0.100 0.075 0.125 0.100 1/4 5/16 11/64 1/4
#8 0.1640 18 0.166 0.161 0.122 0.116 0.112 0.106 0.111 0.083 0.139 0.111 5/16 7/16 3/16 1/4
#10 0.1900 16 0.189 0.183 0.141 0.135 0.130 0.123 0.125 0.094 0.156 0.125 3/8 1/2 15/64 5/16
#12 0.2160 14 0.215 0.209 0.164 0.157 0.152 0.145 0.143 0.107 0.179 0.143 7/16 9/16 9/32 3/8
#14 0.2500 14 0.246 0.240 0.192 0.185 0.179 0.171 0.143 0.107 0.179 0.143 1/2 5/8 9/32 3/8
5/16 0.3125 12 0.315 0.306 0.244 0.236 0.230 0.222 0.167 0.125 0.196 0.161 15/32 19/32 27/32 31/32
3/8 0.3750 12 0.380 0.371 0.309 0.299 0.293 0.285 0.167 0.125 0.196 0.161 17/32 11/16 15/16 1-1/8
D P S L
Determinant Minimum
Nominal Point Taper Length Length for Practical Screw
Thrds
Size or Basic Major Point Point Taper Length
per
Screw Diameter Diameter
Inch For Short For Long
Diameter 90° Csk 90° Csk
Screws Screws
Heads Heads Heads Heads
Max Min Max Min Max Min Max Min
#2 0.0860 56 0.0860 0.0813 0.068 0.061 0.062 0.045 0.080 0.062 5/32 3/16 5/32 3/16
#4 0.1120 40 0.1120 0.1061 0.087 0.078 0.088 0.062 0.112 0.088 7/32 1/4 3/16 1/4
#6 0.1380 32 0.1380 0.1312 0.107 0.096 0.109 0.078 0.141 0.109 1/4 5/16 1/4 5/16
#8 0.1640 32 0.1640 0.1571 0.132 0.122 0.109 0.078 0.141 0.109 1/4 11/32 1/4 5/16
#10 0.1900 24 0.1900 0.1818 0.148 0.135 0.146 0.104 0.188 0.146 11/32 7/16 5/16 13/32
#10 0.1900 32 0.1900 0.1831 0.158 0.148 0.109 0.078 0.141 0.109 1/4 11/32 1/4 5/16
#12 0.2160 24 0.2160 0.2078 0.174 0.161 0.146 0.104 0.188 0.146 11/32 7/16 5/16 13/32
1/4 0.2500 20 0.2500 0.2408 0.200 0.184 0.175 0.125 0.225 0.175 13/32 17/32 3/8 1/2
5/16 0.3125 18 0.3125 0.3026 0.257 0.239 0.194 0.139 0.250 0.194 15/32 19/32 7/16 9/16
3/8 0.3750 16 0.3750 0.3643 0.312 0.293 0.219 0.156 0.281 0.219 1/2 11/16 15/32 5/8
L39
Fax 1.262.786.3530 www.americanboltcorp.com
Bugle Head
Drywall Screws
Deck Screws
Particle Board Screws
A H R I
Size Head Diameter Head Height Recess Diameter Recess Depth
Max Min Max Min Max Min Max Min
#6 .347 .315 .031 .020 .189 .176 .110 .087
#7 .355 .322 .035 .020 .206 .191 .125 .102
#8 .363 .330 .039 .020 .214 .201 .135 .112
#10 .379 .344 .045 .034 .222 .208 .142 .137
G T B F
Head Dimensions Recess Dimensions
Drive
Screw Size (Fallaway) Max
Max Abs. Gauge Pen- Size
Ref Ref Penetration of
Sharp Min. etration Min
No-Go Gage
1/4 (.250) .507 .452 .153 .221 .060 .030 T30
5/16 (.312) .635 .566 .191 .266 .087 .030 T40
L40
www.americanboltcorp.com 1.800.588.1200
DryWall and deck Screws
A U M D d
Screw
Size Head Head Recess Recess Major Minor
Dia Thickness Dia Depth Dia Dia
Max .340 .031 max .107 .142 .102
#6
Min .320 .020 .189 .087 .136 .096
Max .358 .039 max .122 .168 .123
#8
Min .339 .020 .205 .115 .160 .116
Max .376 .044 max .142 .201 .158
#10
Min .395 .034 .221 .137 .193 .152
L41
Fax 1.262.786.3530 www.americanboltcorp.com
Self-DRilling Screws
T t P
Nominal Size or Basic
Threads Protrusion
Screw Major Diameter Minor Diameter
per Inch Allowance
Diameter
Max Min Max Min #2 Pt #3 Pt
#6 0.1380 20 0.139 0.135 0.104 0.099 0.190 -
#8 0.1640 18 0.166 0.161 0.122 0.116 0.211 -
#10 0.1900 16 0.189 0.183 0.141 0.135 0.235 0.300
#12 0.2160 14 0.215 0.209 0.164 0.157 - 0.353
1/4 0.2500 14 0.246 0.240 0.192 0.185 - 0.393
Recommended
Point Length
Application What to Use Diameter Material
Thickness Inches Decimal
#4 0.035 to 0.080 9/64 0.140
#6 0.035 to 0.090 9/64 0.140
Light Gage Teks/2 & #8 0.035 to 0.100 5/32 0.156
Metals Teks/2F #10 0.035 to 0.110 13/64 0.203
#12 0.035 to 0.140 15/64 0.234
1/4 0.035 to 0.175 19/64 0.296
#8 0.100 to 0.140 13/64 0.203
Medium #10 0.110 to 0.175 1/4 0.250
Teks/3
Gage Metals #12 0.110 to 0.210 9/32 0.281
1/4 0.110 to 0.250 5/16 0.312
Heavier Special #12 0.210 to 0.345 7/16 0.437
Gage Metals Teks/4 1/4 0.250 to 0.375 15/32 0.468
Heaviest
Tek/5 #12 0.250 to 0.500 5/8 0.625
Gage Metals
L42
www.americanboltcorp.com 1.800.588.1200
Thumb Screws
P S
Type P
A B C C1 L
Nominal Size or
Threads Head Head Practical Screw
Basic Screw Head Width Head Height
per Inch Thickness Thickness Length
Diameter
Max Min Max Min Max Min Max Min Max Min
#8 0.164 32 0.51 0.49 0.32 0.30 0.09 0.07 0.04 0.02 1.00 0.38
#10 0.190 24 0.89 0.83 0.78 0.66 0.18 0.16 0.08 0.06 2.00 0.50
1/4 0.250 20 1.05 0.99 0.94 0.81 0.24 0.22 0.10 0.08 3.00 0.50
5/16 0.312 18 1.21 1.15 1.00 0.88 0.27 0.25 0.11 0.09 4.00 0.50
Type S
A B C C1 L
Nominal Size or
Threads Head Head Practical Screw
Basic Screw Head Width Head Height
per Inch Thickness Thickness Length
Diameter
Max Min Max Min Max Min Max Min Max Min
1/4 0.250 20 0.55 0.52 0.64 0.61 0.07 0.05 0.47 0.44 1.50 0.50
Due to variations in head dimensions from different manufacturers, thumb screws may not always conform to listed (IFI) specs.
L Nominal Screw 1/8 3/16 1/4 5/16 3/8 1/2 5/8 3/4 1 in and over
Length
S Pilot Length 0.047 0.047 0.047 0.047 0.602 0.062 0.078 0.078 0.125
L
See page D8 for Product Offerings
L43
Fax 1.262.786.3530 www.americanboltcorp.com
Hex Socket Head Cap Screws
(1960 Series)
D HD H SH KS KE G K
Nominal Key
Head Wall Cham-
Diameter Body Head Hexagon En-
Head Height Side Thick- fer or
Diameter Diameter Key Size gage-
Height ness Radius
ment
Frac- Deci-
Max Min Max Min Max Min Min Nom Min Min Max
tional mal
#0 0.0600 0.0600 0.0568 0.096 0.091 0.060 0.057 0.054 0.050 0.025 0.020 0.003
#1 0.0730 0.0730 0.0695 0.118 0.112 0.073 0.070 0.066 1/16 0.062 0.031 0.025 0.003
#2 0.0860 0.0860 0.0822 0.140 0.134 0.086 0.083 0.077 5/64 0.078 0.038 0.029 0.003
#3 0.0990 0.0990 0.0949 0.161 0.154 0.099 0.095 0.089 5/64 0.078 0.044 0.034 0.003
#4 0.1120 0.1120 0.1075 0.183 0.176 0.112 0.108 0.101 3/32 0.094 0.051 0.038 0.005
#5 0.1250 0.1250 0.1202 0.205 0.198 0.125 0.121 0.112 3/32 0.094 0.057 0.043 0.005
#6 0.1380 0.1380 0.1329 0.226 0.218 0.138 0.134 0.124 7/64 0.109 0.064 0.047 0.005
#8 0.1640 0.1640 0.1585 0.270 0.262 0.164 0.159 0.148 9/64 0.141 0.077 0.056 0.005
#10 0.1900 0.1900 0.1840 0.312 0.303 0.190 0.185 0.171 5/32 0.156 0.090 0.065 0.005
1/4 0.2500 0.2500 0.2435 0.375 0.365 0.250 0.244 0.225 3/16 0.188 0.120 0.095 0.008
5/16 0.3125 0.3125 0.3053 0.469 0.457 0.312 0.306 0.281 1/4 0.250 0.151 0.119 0.008
3/8 0.3750 0.3750 0.3678 0.562 0.550 0.375 0.368 0.337 5/16 0.312 0.182 0.143 0.008
7/16 0.4375 0.4375 0.4294 0.656 0.642 0.438 0.430 0.394 3/8 0.375 0.213 0.166 0.010
1/2 0.5000 0.5000 0.4919 0.750 0.735 0.500 0.492 0.450 3/8 0.375 0.245 0.190 0.010
5/8 0.6250 0.6250 0.6163 0.938 0.921 0.625 0.616 0.562 1/2 0.500 0.307 0.238 0.010
3/4 0.7500 0.7500 0.7406 1.125 1.107 0.750 0.740 0.675 5/8 0.625 0.370 0.285 0.010
7/8 0.8750 0.8750 0.8647 1.312 1.293 0.875 0.864 0.787 3/4 0.750 0.432 0.333 0.015
1 1.0000 1.0000 0.9886 1.500 1.479 1.000 0.988 0.900 3/4 0.750 0.495 0.380 0.015
1-1/8 1.1250 1.1250 1.1086 1.688 1.665 1.125 1.111 1.012 7/8 0.875 0.557 0.428 0.015
1-1/4 1.2500 1.2500 1.2336 1.875 1.852 1.250 1.236 1.125 7/8 0.875 0.620 0.475 0.015
1-3/8 1.3750 1.3750 1.3568 2.062 2.038 1.375 1.360 1.237 1 1.000 0.682 0.523 0.015
1-1/2 1.5000 1.5000 1.4818 2.250 2.224 1.500 1.485 1.350 1 1.000 0.745 0.570 0.015
1-3/4 1.7500 1.7500 1.7295 2.625 2.597 1.750 1.734 1.575 1-1/4 1.250 0.870 0.665 0.015
2 2.0000 2.0000 1.9780 3.000 2.970 2.000 1.983 1.800 1-1/2 1.500 0.995 0.760 0.015
2-1/4 2.2500 2.2500 2.2280 3.375 3.344 2.250 2.232 2.025 1-3/4 1.750 1.120 0.855 0.031
2-1/2 2.5000 2.5000 2.4762 3.750 3.717 2.500 2.481 2.250 1-3/4 1.750 1.245 0.950 0.031
2-3/4 2.7500 2.7500 2.7262 4.125 4.090 2.750 2.730 2.475 2 2.000 1.370 1.045 0.031
3 3.0000 3.0000 2.9762 4.500 4.464 3.000 2.979 2.700 2-1/4 2.250 1.495 1.140 0.031
3-1/4 3.2500 3.2500 3.2262 4.875 4.837 3.250 3.228 2.925 2-1/4 2.250 1.620 1.235 0.031
3-1/2 3.5000 3.5000 3.4762 5.250 5.211 3.500 3.478 3.150 2-3/4 2.750 1.745 1.330 0.031
3-3/4 3.7500 3.7500 3.7262 5.625 5.584 3.750 3.727 3.375 2-3/4 2.750 1.870 1.425 0.031
L 4 4.0000 4.0000 3.9762 6.000 5.958 4.000 3.976 3.600 3 3.000 1.995 1.520 0.031
D HD H KS KE
Nominal Diameter Head Diameter Head Height Key
Body Diameter Hexagon Key Size
Theoretical Abs. Refer- Flushness Engagement
Fractional Decimal Max Min Sharp Max Min ence Tolerance Nom Min
#0 0.0600 0.0600 0.0568 0.138 0.117 0.044 0.006 0.035 0.025
#1 0.0730 0.0730 0.0695 0.168 0.143 0.054 0.007 0.050 0.031
#2 0.0860 0.0860 0.0822 0.197 0.168 0.064 0.008 0.050 0.038
#3 0.0990 0.0990 0.0949 0.226 0.193 0.073 0.010 1/16 0.062 0.044
#4 0.1120 0.1120 0.1075 0.255 0.218 0.083 0.011 1/16 0.062 0.055
#5 0.1250 0.1250 0.1202 0.281 0.240 0.090 0.012 5/64 0.078 0.061
#6 0.1380 0.1380 0.1329 0.307 0.263 0.097 0.013 5/64 0.078 0.066
#8 0.1640 0.1640 0.1585 0.359 0.311 0.112 0.014 3/32 0.094 0.076
#10 0.1900 0.1900 0.1840 0.411 0.359 0.127 0.015 1/8 0.125 0.087
1/4 0.2500 0.2500 0.2435 0.531 0.480 0.161 0.016 5/32 0.156 0.111
5/16 0.3125 0.3125 0.3053 0.656 0.600 0.198 0.017 3/16 0.188 0.135
3/8 0.3750 0.3750 0.3678 0.781 0.720 0.234 0.018 7/32 0.219 0.159
7/16 0.4375 0.4375 0.4294 0.844 0.781 0.234 0.018 1/4 0.250 0.159
1/2 0.5000 0.5000 0.4919 0.938 0.872 0.251 0.018 5/16 0.312 0.172
5/8 0.6250 0.6250 0.6163 1.188 1.112 0.324 0.022 3/8 0.375 0.220
3/4 0.7500 0.7500 0.7406 1.438 1.355 0.396 0.024 1/2 0.500 0.220
7/8 0.8750 0.8750 0.8647 1.688 1.604 0.468 0.025 9/16 0.562 0.248
1 1.0000 1.0000 0.9886 1.938 1.841 0.540 0.028 5/8 0.625 0.297
1-1/8 1.1250 1.1250 1.1086 2.188 2.079 0.611 0.031 3/4 0.750 0.325
1-1/4 1.2500 1.2500 1.2336 2.438 2.316 0.683 0.035 7/8 0.875 0.358
1-3/8 1.3750 1.3750 1.3568 2.688 2.553 0.755 0.038 7/8 0.875 0.402
1-1/2 1.5000 1.5000 1.4818 2.938 2.791 0.827 0.042 1 1.000 0.435
L45
Fax 1.262.786.3530 www.americanboltcorp.com
Hex Button Socket Head Cap Screws
D HD H S KS KE
Head
Hexagon Key Key
Nominal Diameter Head Diameter Head Height Side
Size Engagement
Height
Fractional Decimal Max Min Max Min Ref Nom Min
#0 0.0600 0.114 0.104 0.032 0.026 0.010 0.035 0.020
#1 0.0730 0.139 0.129 0.039 0.033 0.010 0.050 0.028
#2 0.0860 0.164 0.154 0.046 0.038 0.010 0.050 0.028
#3 0.0990 0.188 0.176 0.052 0.044 0.010 1/16 0.062 0.035
#4 0.1120 0.213 0.201 0.059 0.051 0.015 1/16 0.062 0.035
#5 0.1250 0.238 0.226 0.066 0.058 0.015 5/64 0.078 0.044
#6 0.1380 0.262 0.250 0.073 0.063 0.015 5/64 0.078 0.044
#8 0.1640 0.312 0.298 0.087 0.077 0.015 3/32 0.094 0.052
#10 0.1900 0.361 0.347 0.101 0.091 0.020 1/8 0.125 0.070
1/4 0.2500 0.437 0.419 0.132 0.122 0.031 5/32 0.156 0.087
5/16 0.3125 0.547 0.527 0.166 0.152 0.031 3/16 0.188 0.105
3/8 0.3750 0.656 0.636 0.199 0.185 0.031 7/32 0.219 0.122
1/2 0.5000 0.875 0.851 0.265 0.245 0.046 5/16 0.312 0.175
5/8 0.6250 1.000 0.970 0.331 0.311 0.062 3/8 0.375 0.210
B D H S K F
Nominal Basic Head Diam- Engage-
Head Height Fillet
Size Screw eter Socket ment
Diam- Size
eter Max Min Max Min Min Max Min
#8 0.1640 .270 .265 .082 .079 .0781 .060 .012 .007
#10 0.1900 .312 .307 .095 .092 .0938 .072 .014 .009
1/4 0.2500 .375 .369 .125 .121 .1250 .094 .014 .009
5/16 0.3125 .437 .431 .156 .152 .1562 .120 .017 .012
3/8 0.3750 .562 .556 .187 .182 .1875 .145 .020 .015
7/16 0.4375 .625 .618 .218 .213 .2188 .166 .023 .018
L 1/2 0.5000 .750 .743 .250 .244 .2500 .184 .026 .020
L46
www.americanboltcorp.com 1.800.588.1200
Hex Socket Head Shoulder Screws
D HD H S KS KE
Nominal Head
Diameter Shoulder Hexagon Key Key
Head Diameter Head Height Side
Diameter Size Engagement
Height
Fractional Decimal Max Min Max Min Max Min Ref Nom Min
1/4 0.250 0.2480 0.2460 0.375 0.357 0.188 0.177 0.157 1/8 0.125 0.094
5/16 0.312 0.3105 0.3085 0.438 0.419 0.219 0.209 0.183 5/32 0.156 0.117
3/8 0.375 0.3730 0.3710 0.562 0.543 0.250 0.240 0.209 3/16 0.188 0.141
1/2 0.500 0.4980 0.4960 0.750 0.729 0.312 0.302 0.262 1/4 0.250 0.188
5/8 0.625 0.6230 0.6210 0.875 0.853 0.375 0.365 0.315 5/16 0.312 0.234
3/4 0.750 0.7480 0.7460 1.000 0.977 0.500 0.490 0.421 3/8 0.375 0.281
1 1.000 0.9980 0.9960 1.312 1.287 0.625 0.610 0.527 1/2 0.500 0.375
1-1/4 1.250 1.2480 1.2460 1.750 1.723 0.750 0.735 0.633 5/8 0.625 0.469
D1 TL
Nominal Size or Basic
Should Diameter Thread
Threads Length
Nominal Thread Size
Per Inch
Fractional Decimal Basic
1/4 0.0250 10 0.1900 24 0.375
5/16 0.312 1/4 0.2500 20 0.438
3/8 0.375 5/16 0.3125 18 0.500
1/2 0.500 3/8 0.3750 16 0.625
5/8 0.625 1/2 0.5000 13 0.750
3/4 0.750 5/8 0.6250 11 0.875
1 1.000 3/4 0.7500 10 1.000
1-1/4 1.250 7/8 0.8750 9 1.125
L47
Fax 1.262.786.3530 www.americanboltcorp.com
Socket Set Screws
S K F O D H A
Min Shortest Length to
Hexagon Cup & Flat Oval Half Dog Point Cone Pt.
Key Which K Applies
Socket Point Point Angle 90°
Nominal Engage- 90°
Size Diameter Radius Diameter Length For These
Size ment Cup Cone Half Lengths
& Flat & Dog or
Nom Min Max Min Basic Max Min Max Min Points Oval Point Longer
Points
#4 0.050 0.070 0.061 0.051 0.084 0.075 0.070 0.030 0.026 0.19 0.19 0.19 0.19
#5 1/16 0.080 0.067 0.057 0.094 0.083 0.078 0.033 0.027 0.19 0.19 0.19 0.19
#6 1/16 0.080 0.074 0.064 0.104 0.092 0.087 0.038 0.032 0.19 0.25 0.19 0.19
#8 5/64 0.090 0.087 0.076 0.123 0.109 0.103 0.043 0.037 0.19 0.25 0.25 0.25
#10 3/32 0.100 0.102 0.088 0.142 0.127 0.120 0.049 0.041 0.19 0.25 0.25 0.25
1/4 1/8 0.125 0.132 0.118 0.188 0.156 0.149 0.067 0.059 0.25 0.31 0.31 0.31
5/16 5/32 0.156 0.172 0.156 0.234 0.203 0.195 0.082 0.074 0.31 0.44 0.38 0.38
3/8 3/16 0.188 0.212 0.194 0.281 0.250 0.241 0.099 0.089 0.38 0.44 0.44 0.44
7/16 7/32 0.219 0.252 0.232 0.328 0.297 0.287 0.114 0.104 0.44 0.63 0.50 0.50
1/2 1/4 0.250 0.291 0.270 0.375 0.344 0.334 0.130 0.120 0.50 0.63 0.63 0.57
5/8 5/16 0.312 0.371 0.347 0.469 0.469 0.456 0.164 0.148 0.63 0.88 0.88 0.75
3/4 3/8 0.375 0.450 0.425 0.562 0.562 0.549 0.196 0.180 0.75 1.00 1.00 0.88
7/8 1/2 0.500 0.530 0.502 0.656 0.656 0.642 0.227 0.211 0.88 1.00 1.00 1.00
L 1 9/16 0.562 0.609 0.579 0.750 0.750 0.734 0.260 0.240 1.00 1.25 1.25 1.13
WF WC H
Nominal Diameter
Width Across Flats Width Across Corners Head Height
Fractional Decimal Max Min Max Min Max Min
#10 0.1900 0.188 0.180 0.265 0.247 0.148 0.134
1/4 0.2500 0.250 0.241 0.354 0.331 0.196 0.178
5/16 0.3125 0.312 0.302 0.442 0.415 0.245 0.224
3/8 0.3750 0.375 0.362 0.530 0.497 0.293 0.270
7/16 0.4375 0.438 0.423 0.619 0.581 0.341 0.315
1/2 0.5000 0.500 0.484 0.707 0.665 0.389 0.361
9/16 0.5625 0.562 0.545 0.795 0.748 0.437 0.407
5/8 0.6250 0.625 0.606 0.884 0.833 0.485 0.452
3/4 0.7500 0.750 0.729 1.060 1.001 0.582 0.544
7/8 0.8750 0.875 0.852 1.237 1.170 0.678 0.635
1 1.0000 1.000 0.974 1.414 1.337 0.774 0.726
1-1/8 1.1250 1.125 1.096 1.591 1.505 0.870 0.817
1-1/4 1.2500 1.250 1.219 1.768 1.674 0.966 0.908
1-3/8 1.3750 1.375 1.342 1.945 1.843 1.063 1.000
1-1/2 1.5000 1.500 1.464 2.121 2.010 1.159 1.091
L49
Fax 1.262.786.3530 www.americanboltcorp.com
Socket Pipe Plug Flush Seal
7/8" TAPER
O S K W L
Tightening
Nominal Threads Hex Key Wall
Nominal Per Inch Overall Length Torque (Inch-
Size Socket Engagement Thickness
O.D. Lbs)
Size Min Min Max Min
1/16 0.307 27 5/32 .140 .052 .250 .235 150
1/8 0.401 27 3/16 .140 .049 .250 .235 250
1/4 0.529 18 1/4 .218 .045 .406 .391 600
3/8 0.667 18 5/16 .250 .040 .406 .391 1200
1/2 0.830 14 3/8 .312 .067 .531 .516 1800
3/4 1.041 14 9/16 .312 .054 .531 .516 3000
1 1.302 11-1/2 5/8 .375 .112 .656 .641 4200
1-1/4 1.647 11-1/2 3/4 .437 .102 .656 .641 5400
L50
www.americanboltcorp.com 1.800.588.1200
Socket Hex Keys (allen)
F C S L R K
Nominal Hexagon Width Hexagon Width Length of Short Length of Long Arm Radius
Chamfer
Key Size Across Flats Across Corners Arm Short Series Long Series of Bend
Max Min Max Min Max Min Max Min Max Min Max Min
0.028 0.0280 0.0275 0.0314 0.0300 0.312 0.125 1.312 1.125 2.688 2.500 0.062 0.003
0.035 0.0350 0.0345 0.0393 0.0378 0.438 0.250 1.312 1.125 2.766 2.578 0.062 0.004
0.050 0.0500 0.0490 0.0560 0.0540 0.625 0.438 1.750 1.562 2.938 2.750 0.062 0.006
1/16 0.0625 0.0615 0.0701 0.0680 0.656 0.469 1.844 1.656 3.094 2.906 0.062 0.008
5/64 0.0781 0.0771 0.0880 0.0859 0.703 0.516 1.969 1.781 3.281 3.094 0.078 0.008
3/32 0.0937 0.0927 0.1058 0.1035 0.750 0.562 2.094 1.906 3.469 3.281 0.094 0.009
7/64 0.1094 0.1079 0.1238 0.1210 0.797 0.609 2.219 2.031 3.656 3.469 0.109 0.014
1/8 0.1250 0.1235 0.1418 0.1390 0.844 0.656 2.344 2.156 3.844 3.656 0.125 0.015
9/64 0.1406 0.1391 0.1593 0.1566 0.891 0.703 2.469 2.281 4.031 3.844 0.141 0.016
5/32 0.1562 0.1547 0.1774 0.1745 0.938 0.750 2.594 2.406 4.219 4.031 0.156 0.016
3/16 0.1875 0.1860 0.2135 0.2105 1.031 0.844 2.844 2.656 4.594 4.406 0.188 0.022
7/32 0.2187 0.2172 0.2490 0.2460 1.125 0.938 3.094 2.906 4.969 4.781 0.219 0.024
1/4 0.2500 0.2485 0.2845 0.2815 1.219 1.031 3.344 3.156 5.344 5.156 0.250 0.030
5/16 0.3125 0.3110 0.3570 0.3531 1.344 1.156 3.844 3.656 6.094 5.906 0.312 0.032
3/8 0.3750 0.3735 0.4285 0.4238 1.469 1.281 4.344 4.156 6.844 6.656 0.375 0.044
7/16 0.4375 0.4355 0.5005 0.4944 1.594 1.406 4.844 4.656 7.594 7.406 0.438 0.047
1/2 0.5000 0.4975 0.5715 0.5650 1.719 1.531 5.344 5.156 8.344 8.156 0.500 0.050
9/16 0.5625 0.5600 0.6420 0.6356 1.844 1.656 5.844 5.656 9.094 8.906 0.562 0.053
5/8 0.62.50 0.6225 0.7146 0.7080 1.969 1.781 6.344 6.156 9.844 9.656 0.625 0.055
3/4 0.7500 0.7470 0.8580 0.8512 2.219 2.031 7.344 7.156 11.344 11.156 0.750 0.070
7/8 0.8750 0.8720 1.0020 0.9931 2.469 2.281 8.344 8.156 12.844 12.656 0.875 0.076
1 1.0000 0.9970 1.1470 1.1350 2.719 2.531 9.344 9.156 14.344 14.156 1.000 0.081
L51
Fax 1.262.786.3530 www.americanboltcorp.com
Dowel Pins
See pages F9-F10 for Product Offerings
A B C Double
Nominal Pin Diameter Crown Heights or Shear
Point Diameter
Size Standard Series Pins Oversize Series Pins Radius Load
Basic Max Min Basic Max Min Max Min Max Min Min Lb
1/8 0.1252 0.1253 0.1251 0.1260 0.1261 0.1259 0.120 0.110 0.041 0.016 3,200
5/32 0.1564 0.1565 0.1563 0.1572 0.1573 0.1571 0.150 0.140 0.052 0.020 5,000
3/16 0.1877 0.1878 0.1876 0.1885 0.1886 0.1884 0.180 0.170 0.062 0.023 7,200
1/4 0.2502 0.2503 0.2501 0.2510 0.2511 0.2509 0.240 0.230 0.083 0.031 12,800
5/16 0.3127 0.3128 0.3126 0.3135 0.3136 0.3134 0.302 0.290 0.104 0.039 20,000
3/8 0.3752 0.3753 0.3751 0.3760 0.3761 0.3759 0.365 0.350 0.125 0.047 28,700
7/16 0.4377 0.4378 0.4376 0.4385 0.4386 0.4384 0.424 0.409 0.146 0.055 39,100
1/2 0.5002 0.5003 0.5001 0.5010 0.5011 0.5009 0.486 0.471 0.167 0.063 51,000
5/8 0.6252 0.6253 0.6251 0.6260 0.6261 0.6259 0.611 0.595 0.208 0.078 79,800
3/4 0.7502 0.7503 0.7501 0.7510 0.7511 0.7509 0.735 0.715 0.250 0.094 114,000
7/8 0.8752 0.8753 0.8751 0.8760 0.8761 0.8759 0.860 0.840 0.293 0.109 156,000
1 1.0002 1.0003 1.0001 1.0010 1.0011 1.0009 0.980 0.960 0.333 0.125 204,000
Spring Pins
See pages F4-F6 for Product Offerings
G H C
Min
Max Recommended Hole Size Double
Pin Chamfer Wall
Diameter R+S+T Chamfer Shear
Diameter Length Thickness
Go Ring 3 Diam Max Strength in
Nominal Nom Pounds
Gage Min Max
.062 .069 .066 .059 .011 .012 .062 .065 425
.078 .086 .083 .075 .014 .018 .078 .081 650
.094 .103 .099 .091 .018 .022 .094 .097 1,000
.125 .135 .131 .122 .024 .028 .125 .129 2,100
.156 .167 .162 .151 .028 .032 .156 .160 3,000
.187 .199 .194 .182 .036 .040 .187 .192 4,400
.219 .232 .226 .214 .042 .048 .219 .224 5,700
.250 .264 .258 .245 .042 .050 .250 .256 7,700
.312 .328 .321 .306 .060 .062 .312 .318 11,500
.375 .392 .385 .368 .060 .077 .375 .382 17,600
.437 .456 .448 .430 .060 .077 .437 .445 20,000
L .500 .521 .513 .485 .060 .094 .500 .510 25,800
L52
www.americanboltcorp.com 1.800.588.1200
Cotter Pins
T W B A
Extended Recomm-
Nominal Size or Head
Total Shank Diameter Wire Width Prong ended
Basic Pin Diameter Diameter
Length Hole Size
Max Min Max Min Min Min
1/32 0.031 0.032 0.028 0.032 0.022 0.06 0.01 0.047
3/64 0.047 0.048 0.044 0.048 0.035 0.09 0.02 0.062
1/16 0.062 0.060 0.056 0.060 0.044 0.12 0.03 0.078
5/64 0.078 0.076 0.072 0.076 0.057 0.16 0.04 0.094
3/32 0.094 0.090 0.086 0.090 0.069 0.19 0.04 0.109
7/64 0.109 0.104 0.100 0.104 0.080 0.22 0.05 0.125
1/8 0.125 0.120 0.116 0.120 0.093 0.25 0.06 0.141
9/64 0.141 0.134 0.130 0.134 0.104 0.28 0.06 0.156
5/32 0.156 0.150 0.146 0.150 0.116 0.31 0.07 0.172
3/16 0.188 0.176 0.172 0.176 0.137 0.38 0.09 0.203
7/32 0.219 0.207 0.202 0.207 0.161 0.44 0.10 0.234
1/4 0.250 0.225 0.220 0.225 0.176 0.50 0.11 0.266
5/16 0.312 0.280 0.275 0.280 0.220 0.62 0.14 0.312
3/8 0.375 0.335 0.329 0.335 0.263 0.75 0.16 0.375
7/16 0.438 0.406 0.400 0.406 0.320 0.88 0.20 0.438
1/2 0.500 0.473 0.467 0.473 0.373 1.00 0.23 0.500
5/8 0.625 0.598 0.590 0.598 0.472 1.25 0.30 0.625
3/4 0.750 0.723 0.715 0.723 0.572 1.50 0.36 0.750
L53
Fax 1.262.786.3530 www.americanboltcorp.com
Retaining Ring Type E
H G W F T
Ring Number Groove Groove Free Diam-
Shaft Thickness
Diameter Width eter
E-4 .040 .026 .012 .025 .010
E-6 .062 .052 .012 .051 .010
E-9 .094 .074 .020 .073 .015
E-12 .125 .095 .020 .094 .015
SE-14 .140 .102 .020 .100 .015
E-15 .156 .116 .029 .114 .025
SE-17 .172 .127 .029 .125 .025
E-18 .188 .147 .029 .145 .025
SE-21 .219 .188 .029 .185 .025
E-25 .250 .210 .029 .207 .025
SE-31 .312 .250 .029 .243 .025
E-37 .375 .303 .039 .300 .035
E-43 .438 .343 .039 .337 .035
E-50 .500 .396 .046 .392 .042
E-62 .625 .485 .046 .480 .042
SE-74 .750 .625 .056 .616 .050
E-87 .875 .675 .056 .668 .050
SE-98 .984 .835 .056 .822 .050
SE-118 1.188 1.079 .068 1.066 .062
L54
www.americanboltcorp.com 1.800.588.1200
Ring
Number
H
Shaft
G
Groove
W
Groove
F
Free
T
Thickness
Retaining
25 .250
Diameter
.230
Width
.029
Diameter
.225 .025 Ring
28
31
.281
.312
.261
.290
.029
.029
.256
.281
.025
.025 Type SH
34
37
.344
.375
.321
.352
.029
.029
.309
.338
.025
.025
External
40 .406 .382 .029 .366 .025
43 .438 .412 .029 .395 .025
50 .500 .468 .039 .461 .035
56 .562 .530 .039 .521 .035
59 .594 .559 .039 .550 .035
62 .625 .588 .039 .579 .035
68 .688 .646 .046 .635 .042
75 .750 .704 .046 .693 .042
81 .812 .762 .046 .751 .042
87 .875 .821 .046 .810 .042
93 .938 .882 .046 .867 .042
100 1.000 .940 .046 .925 .042
106 1.062 .998 .056 .982 .050
112 1.125 1.059 .056 1.041 .050
118 1.188 1.118 .056 1.098 .050
125 1.250 1.176 .056 1.156 .050
131 1.312 1.232 .056 1.214 .050
137 1.375 1.291 .056 1.272 .050
143 1.438 1.350 .056 1.333 .050
150 1.500 1.406 .056 1.387 .050
156 1.562 1.468 .068 1.446 .062
162 1.625 1.529 .068 1.503 .062
168 1.688 1.589 .068 1.560 .062
175 1.750 1.650 .068 1.618 .062
181 1.812 1.708 .068 1.675 .062
187 1.875 1.769 .068 1.735 .062
200 2.000 1.886 .068 1.850 .062
206 2.062 1.946 .086 1.906 .078
212 2.125 2.003 .086 1.964 .078
225 2.250 2.120 .086 2.081 .078
231 2.312 2.178 .086 2.139 .078
237 2.375 2.239 .086 2.197 .078
243 2.438 2.299 .086 2.255 .078
250 2.500 2.360 .086 2.313 .078
262 2.625 2.481 .086 2.428 .078
268 2.688 2.541 .086 2.485 .078
275 2.750 2.602 .103 2.543 .093
287 2.875 2.721 .103 2.659 .093 L
300 3.000 2.838 .103 2.775 .093
See page F13 for Product Offerings
L55
Fax 1.262.786.3530 www.americanboltcorp.com
Retaining Ring
Number
H
Shaft
G
Groove
W
Groove
F
Free
T
Thickness
Ring 25 .250
Diameter
.268
Width
.020
Diameter
.280 .015
Type HO 31
37
.312
.375
.330
.397
.020
.029
.346
.415
.015
.025
Internal 43
50
.438
.500
.461
.530
.029
.039
.482
.548
.025
.035
56 .562 .596 .039 .620 .035
62 .625 .665 .039 .694 .035
68 .688 .732 .039 .763 .035
75 .750 .796 .039 .831 .035
81 .812 .862 .046 .901 .042
87 .875 .931 .046 .971 .042
93 .938 1.000 .046 1.041 .042
100 1.000 1.066 .046 1.111 .042
106 1.062 1.130 .056 1.180 .050
112 1.125 1.197 .056 1.249 .050
118 1.181 1.255 .056 1.319 .050
125 1.250 1.330 .056 1.388 .050
131 1.312 1.396 .056 1.456 .050
137 1.375 1.461 .056 1.526 .050
143 1.438 1.528 .056 1.596 .050
150 1.500 1.594 .056 1.660 .050
156 1.562 1.658 .068 1.734 .062
162 1.625 1.725 .068 1.804 .062
168 1.688 1.792 .068 1.874 .062
175 1.750 1.858 .068 1.942 .062
181 1.812 1.922 .068 2.012 .062
187 1.875 1.989 .068 2.072 .062
193 1.938 2.056 .068 2.141 .062
200 2.000 2.122 .068 2.210 .062
206 2.062 2.186 .086 2.280 .078
212 2.125 2.251 .086 2.350 .078
218 2.188 2.318 .086 2.415 .078
225 2.250 2.382 .086 2.490 .078
231 2.312 2.450 .086 2.560 .078
237 2.375 2.517 .086 2.630 .078
244 2.440 2.584 .086 2.702 .078
250 2.500 2.648 .086 2.775 .078
256 2.562 2.714 .103 2.844 .093
262 2.625 2.781 .103 2.910 .093
268 2.688 2.848 .103 2.980 .093
275 2.750 2.914 .103 3.050 .093
281 2.812 2.980 .103 3.121 .093
L 287 2.875 3.051 .103 3.191 .093
300 3.000 3.182 .103 3.325 .093
L57
Fax 1.262.786.3530 www.americanboltcorp.com
Comparison Of Rivet Part Numbers
Stainless Steel Rivet Stainless Steel Mandrel, Aluminum Rivet Aluminum Mandrel
AFC POP MARSON STAR CElUS CHERRY GESIPA
ABA41 AD41ABS AB4-1A 4-1AAD A/A41D AAP41 GAMD41A
ABA42 AD42ABS AB4-2A 4-2AAD A/A42D AAP42 GAMD42A
ABA43 AD43ABS AB4-3A 4-3AAD A/A43D AAP43 GAMD43A
ABA44 AD44ABS AB4-4A 4-4AAD A/A44D AAP44 GAMD44A
ABA4S AD4SABS AB4-SA 4-SAAD A/A4SD AAP4S GAMD4SA
ABA46 AD46ABS AB4-6A 4-6AAD A/A46D AAP46 GAMD46A
ABA48 AD48ABS AB4-8A 4-8AAD A/A48D AAP48 GAMD48A
ABAS2 ADS2ABS ABS-2A S-2AAD A/AS2D AAPS2 GAMDS2A
ABAS3 - ABS-3A S-3AAD A/AS3D - GAMDS3A
ABAS4 ADS4ABS ABS-4A S-4AAD A/AS4D AAPS4 GAMDS4A
ABAS6 ADS6ABS ABS-6A S-6AAD A/AS6D AAPS6 GAMDS6A
ABAS8 ADS8ABS ABS-8A S-8AAD A/AS8D AAPS8 GAMDS8A
ABAS10 - - - - AAP10 -
- - - - - - -
ABA62 AD62ABS AB6-2A 6-2AAD A/A62D AAP62 GAMD62A
ABA64 AD64ABS AB6-4A 6-4AAD A/A64D AAP64 GAMD64A
ABA66 AD66ABS AB6-6A 6-6AAD A/A66D AAP66 GAMD66A
ABA68 AD68ABS AB6-8A 6-8AAD A/A68D AAP68 GAMD68A
ABA610 AD610ABS AB6-10A 6-10AAD A/A610D AAP610 GAMD610A
ABA612 AD612ABS AB6-12A - - AAP612 GAMD612A
- - - - - - GAMD614A
- - - - - - GAMD616A
- - - - - - -
- - - - - - -
- - - - - - -
FBF42 SSD42SSBS SSB4-2S 4-2SSDS SS/SS42D CCP-42 GSSMD42SS
FBF43 SSD43SSBS SSB4-3S 4-3SSDS SS/SS43D CCP-43 GSSMD43SS
FBF44 SSD44SSBS SSB4-4S 4-4SSDS SS/SS44D CCP-44 GSSMD43SS
FBF46 SSD46SSBS SSB4-6S 4-6SSDS SS/SS46D CCP-46 GSSMD46SS
FBF48 SSD48SSBS SSB4-8S 4-8SSDS SS/SS48D CCP-48 GSSMD48SS
FBF52 SSDS2SSBS SSBS-2S 5-2SSDS SS/SSS2D CCP-S2 GSSMDS3SS
FBF54 SSDS4SSBS SSBS-4S 5-4SSDS SS/SSS4D CCP-S4 GSSMDS4SS
FBF56 SSDS6SSBS SSBS-6S 5-6SSDS SS/SSS6D CCP-S6 GSSMDS6SS
FBF58 SSDS8SSBS SSBS-8S 5-8SSDS SS/SSS8D CCP-S8 GSSMDS8SS
FBF62 SSD62SSBS SSB6-2S 6-2SSDS SS/SS62D CCP-62 GSSMD62SS
FBF64 SSD64SSBS SSB6-4S 6-4SSDS SS/SS64D CCP-64 GSSMD64SS
FBF66 SSD66SSBS SSB6-6S 6-6SSDS SS/SS66D CCP-66 GSSMD66SS
L FBF68 SSD68SSBS SSB6-8S 6-8SSDS SS/SS68D CCP-68 GSSMD68SS
L58
www.americanboltcorp.com 1.800.588.1200
Blind Rivet Specifications
aPPLICATION dATA
L Weight Lb/M L Weight Lb/M
Rivet Grip Rivet
Barrel Grip Range Barrel
Number Range ADA ADS SDS Number ADA ADS SDS
Length Length
31 .020-.062 .187 - 1.15 - 516 .876-1.000 1.175 - 5.70 -
32 .020-.125 .250 - 1.17 - 62 .020-.125 .325 2.54 5.93 7.40
33 .087-.187 .312 - 1.20 - 64 .188-.250 .450 2.73 6.15 8.00
34 .126-.250 .375 - 1.22 - 64L .188-.250 .450 3.74 6.93 -
41 .020-.062 .212 .88 2.19 2.50 66 .251-.375 .575 2.89 6.77 9.18
42 .063-.125 .275 .90 2.22 2.70 66L .251-.375 .575 3.92 7.54 -
43 .126-.187 .337 .94 2.27 2.76 68 .376-.500 .700 3.16 6.95 9.65
44 .188-.250 .400 1.03 2.37 2.93 68L .376-.500 .700 4.17 7.79 -
44L .188-.250 .400 - 2.53 - 610 .510-.625 .825 3.59 7.71 10.72
45 .251-.312 .462 1.10 2.49 3.24 610L .510-.625 .825 4.50 8.61 -
46 .313-.375 .525 1.15 2.53 3.30 612 .626-.750 .950 3.72 7.95 -
48 .376-.500 .650 1.21 2.68 4.89 614 .751-.875 1.075 4.10 9.81 -
52 .020-.125 .300 1.64 3.91 5.06 616 .876-1.000 1.200 4.22 10.05 -
53 .125-.187 .362 1.67 3.97 5.19 618 1.001-1.125 1.325 4.28 10.16 -
54 .188-.250 .425 1.72 4.00 5.60 620 1.126-1.250 1.450 4.35 10.32 -
56 .251-.375 .550 1.92 4.26 6.14 622 1.251-1.375 1.575 4.42 11.10 -
58 .376-.500 .675 2.10 4.65 - 84 .126-.250 .500 - 13.40 -
510 .501-.625 .800 2.22 4.93 - 86 .251-.375 .625 - 13.75 -
512 .626-.750 .925 2.44 5.22 - 88 .376-.500 .750 - 14.10 -
514 .751-.875 1.050 3.30 5.53 - 810 .501-.625 .875 - 15.95 -
L
L59
Fax 1.262.786.3530 www.americanboltcorp.com
Comparison of Rivet Part Numbers
Aluminum Rivet Steel Mandrel Large Flange
AFC POP MARSON STAR CHUS CHERRY GESIPA
ABS64L - ABL6-4 - A/S64LF BSL-64 GSML64A
ABS66L AD66BSLF ABL6-6 6-6ASLF A/S66LF BSL-66 GSML66A
ABS68L AD68BSLF ABL6-8 6-8ASLF A/S68LF BSL-68 GSML68A
ABS610L AD610BSLF ABL6-10 6-10ASLF A/S610LF BSL-610 GSML610A
ABA610L AD610ABSLF ABL6-10A 6-10AALF A/A610LF AAL-610 GAML610A
Aluminum Rivet Steel Mandrel
AFC POP MARSON STAR CHUS CHERRY GESIPA
- - - - - - -
ABS32 AD32BS AB3-2 32ASD A/S32D BSP32 GSMD32A
- - - - - - -
ABS34 AD34BS AB3-4 34ASD A/S34D BSP34 GSMD34A
ABS41 AD41BS AB4-1 4-1ASD A/S41 DBSP41 GSMD41A
ABS42 AD42BS AB4-2 4-2ASD A/S42D BSP42 GSMD42A
ABS43 AD43BS AB4-3 4-3ASD A/S43 BSP43 GSMD43A
ABS44 AD44BS AB4-4 4-4ASD A/S44D BSP44 GSMD44A
ABS45 AD45BS AB4-5 4-5ASD A/S45D BSP45 GSMD45A
ABS46 AD46BS AB4-6 4-6ASD A/S46D BSP46 GSMD46A
ABS48 AD48BS AB4-8 4-8ASD A/S48 BSP48 GSMD48A
ABS52 AD52BS AB5-2 5-2ASD A/S52D BSP52 GSMD52A
ABS53 AD53BS AB5-3 5-3ASD A/S53D - GSMD53A
ABS54 AD54BS AB5-4 5-4ASD A/S54D BSP54 GSMD54A
ABS56 AD56BS AB5-6 5-6ASD A/S56D BSP56 GSMD56A
ABS58 AD58BS AB5-8 5-8ASD A/S58D BSP58 GSMD58A
ABS510 - - - - BSP510 -
- - - - - - -
- - - - - - -
- - - - - - -
ABS62 AD62BS AB6-2 6-2ASD A/S62D BSP62 GSMD62A
ABS64 AD64BS AB6-4 6-4ASD A/S64D BSP64 GSMD64A
ABS66 AD66BS AB6-6 6-6ASD A/S66D BSP66 GSMD66A
ABS68 AD68BS AB6-8 6-8ASD A/S68D BSP68 GSMD68A
ABS610 AD610BS AB6-10 6-10ASD A/S610D BSP610 GSMD610A
ABS612 AD612BS AB6-12 - A/S612D BSP612 GSMD612A
- - - - - - GSMD614A
- - - - - - -
- - - - - - -
- - - - - - -
- - - - - - -
ABS84 AD84BS AB8-4 - A/S84D BSP84 GSMD84A
L ABS86 AD86BS AB8-6 - A/S86D BSP86 GSMD86A
ABS88 AD88BS - - A/S88D BSP88 GSMD88A
L60
www.americanboltcorp.com 1.800.588.1200
pLATING/bAKING sPECIFICATIONS
Plating Description
Electro-Zinc Zinc is relatively economical and offers good corrosion resistance in environments not subject to & Clear exces-
sive moisture. Commercial zinc plating has a standard minimum thickness of 0.00015 inches. However, Class
2A thread allowances in sizes NO.8 and smaller may not accommodate this thickness. A clear or bluish chromate
finish is applied on top of the zinc to provide additional protection against white oxidation spots which can form
due to moisture. Electroplating is the most common way of applying zinc coatings to fasteners.
Electro-Zinc Commercial zinc-yellow plating has a standard minimum thickness of 0.00020 inches. However, Class 2A thread
&Yellow allowances in sizes NO. 8 and smaller may not accommodate this thickness. Yellow chromate offers a greater
degree of protection from white corrosion than does clear chromate. Electroplating is the most common way of
applying zinc coatings to fasteners.
Electro-Zinc & A wax lubricant is added to the zinc coatings of certain fasteners to improve the ease of assembly. This is the
Wax standard plating for thread rolling screws including the Plastite® and Taptite® II, as well as two-way reversible
center-lock nuts. Case-hardened parts are still recommended to be baked after plating (see below).
Mechanical Mechanically applying zinc to fasteners reduces the risk of hydrogen embrittlement forming within the parts. A
Zinc & Clear clear or bluish chromate finish is applied on top of the zinc to provide additional protection against white oxida-
tion spots which can form due to moisture. It is common for lockwashers made from spring steel to be plated this
way to avoid brittleness after baking.
Mechanical This finish is identical to mechanical zinc but with a yellow chromate finish. This is the standard plating for high-
Zinc & Yellow alloy split lockwashers and for tooth lockwashers used with zinc yellow machine screws.
Electro-Zinc Socket cap screws can receive a zinc plating of 0.0002 inches thickness. A clear chromate finish is applied on top
& Clear for of the zinc to provide additional protection against white corrosion. The manufacturer must be told prior to the
Sockets thread rolling process that the parts are to be plated. The plated parts are then baked at 375°F for 24 hours within
1 hour of plating, then subjected to a 72-hour stress test.
Black This is the standard finish for most drywall screws, particle board screws and retaining rings. It can have either a
Phosphate dull or bright appearance. No additional oil treatment is added.
Black The most common standard coating of black phosphate and oil is 1100 mg per sq/ft, minimum. The oil serves as
Phosphate & a rust inhibitor and a lubricant. Some fasteners with this plating are required to pass a salt-spray test, the duration
Oil and cost of which must be agreed upon between buyer and seller prior to the sale. Floorboard screws, frame bolts,
Grade-GT locknuts and spring nuts are usually supplied with a black phosphate and oil finish.
Nickel Nickel has more of a silver color to it than zinc and has similar corrosion resistant characteristics. It is the stan-
dard finish of cap nuts and countersunk finishing washers.
Cadmium & Cadmium plating results in a smoother surface and greater resistance to white oxidation spots than zinc plat-
Wax ing. However, cadmium is a much more toxic metal than zinc, which makes the plating process more difficult
and costly. The standard most commercial platers use when applying cadmium is a minimum thickness of .0002
inches. A supplemental wax coating is often added as a lubricant when cadmium is used on prevailing torque lock
nuts.
Hot-Dip Hot dip galvanizing is generally the most effective way to apply a sufficient thickness of zinc to threaded fasteners
Galvanized for the zinc to serve as a corrosion protectant in harsh environments. During the galvanizing process, steel reacts
with molten zinc, forming layers of zinc-iron alloy layers which are metallurgically bonded to the steel surface.
This hard barrier has a low corrosion rate and resists mechanical damage. Bolts and nuts 3/8 inch diameter and
smaller shall have a zinc coating with an average thickness of 0.0017 in. with no individual bolt having a coating
of less than 0.0014 in. Bolts and nuts over 3/8 inches diameter, and all sizes if washers shall have a zinc coating
with an average thickness of 0.0021 in. with no individual bolt having a coating of less than 0.0017 in.
Dacrotized Dacrotizing is a pollution-free ceramic coating for fasteners used with treated lumber. The coating offers corro-
sion protection comparable to hot-dip galvanizing without discoloring the wood. Screws with a proper dacrotized
coating can typically withstand a 500-hour salt-spray test. Dacrotizing minimizes greatly the risk of hydrogen
embrittlement so baking the parts is not required after the finish is applied.
Baking of Case Electroplated screws which are case hardened should be baked for a minimum of 4 hours within the temperature
Hardened range of 375-450°F no later than 4 hours after the plating operation. However, this process does not guarantee
Parts that hydrogen embrittlement will not still be present after baking or that it will not occur at a later date while in
service. Specialized testing or a substitute part may be required, depending on the application. This heat treatment
practice is recommended for tapping screws, drywall screws, SEMS screws, clinch nuts and clinch studs.
L
L61
Fax 1.262.786.3530 www.americanboltcorp.com
Millimeter to Inch Conversions
mm inches mm inches mm inches mm inches mm inches
1 .0394 21 .8268 41 1.6142 61 2.4016 81 3.1890
2 .0787 22 .8661 42 1.6535 62 2.4410 82 3.2284
3 .1181 23 .9055 43 1.6929 63 2.4803 83 3.2677
4 .1575 24 .9449 44 1.7323 64 2.5197 84 3.3071
5 .1969 25 .9843 45 1.7717 65 2.5591 85 3.3465
6 .2362 26 1.0236 46 1.8110 66 2.5984 86 3.3858
7 .2756 27 1.0630 47 1.8504 67 2.6378 87 3.4252
8 .3150 28 1.1024 48 1.8898 68 2.6772 88 3.4646
9 .3543 29 1.1417 49 1.9291 69 2.7165 89 3.5039
10 .3937 30 1.1811 50 1.9685 70 2.7559 90 3.5433
11 .4331 31 1.2205 51 2.0079 71 2.7953 91 3.5827
12 .4724 32 1.2598 52 2.0472 72 2.8347 92 3.6221
13 .5118 33 1.2992 53 2.0866 73 2.8740 93 3.6614
14 .5512 34 1.3386 54 2.1260 74 2.9134 94 3.7008
15 .5906 35 1.3780 55 2.1654 75 2.9528 95 3.7402
16 .6299 36 1.4173 56 2.2047 76 2.9921 96 3.7795
17 .6693 37 1.4567 57 2.2441 77 3.0315 97 3.8189
18 .7087 38 1.4961 58 2.2835 78 3.0709 98 3.8583
19 .7480 39 1.5354 59 2.3228 79 3.1102 99 3.8976
20 .7872 40 1.5748 60 2.3622 80 3.1496 100 3.9370
Tap Size Pitch Drill Inch Drill Tap Size Pitch Drill Inch Drill
mm mm mm Equiv Inch mm mm mm Equiv Inch
M1.6 .35 1.25 0.049 M10 1.5 8.5 0.335 Q
M2 .4 1.6 0.063 1/16 M12 1.75 10.2 0.402 Y
M2.5 .45 20.5 0.081 46 M14 2 12 0.472 15/32
M3 .5 2.5 0.098 40 M16 2 14 0.551 35/64
M4 .7 3.3 0.13 30 M18 2.5 15.5 0.61 39/64
M5 .8 4.2 0.165 19 M20 2.5 17.5 0.689 11/16
M6 1 5 0.197 9 M24 3 21 0.827 53/64
M7 1 6 0.236 A M30 3.5 26.5 1.043 1-3/64
M8 1.25 6.8 0.266 17/64 M36 4 32 1.26 1-17/64
L
L62
www.americanboltcorp.com 1.800.588.1200
Tap Drill Sizes
Tap Drill Tap Drill
Tap Size Pitch Tap Size Pitch
75% 75%
0 -80 NF 3/64 1-1/8 -14 NS 59/64
1 -64 NC 53 -7 NC 63/64
-72 NF 53 1-1/4 -12 NF 1-1/32
2 -56 NC 50 -7 NC 1-7/64
-64 NF 50 1-1/2 -12 NF 1-11/64
3 -48 NC 47 -6 NC 1-11/32
-56 NF 45 1-3/4 -12 NF 1-27/64
4 -40 NC 43 -5 NC 1-9/16
-48 NF 42 2 -4-1/2 NF 1-25/32
5 -40 NC 38
-44 NF 37
6 -32 NC 36
-36 NF 33
8 -32 NC 29
-36 NF 29 Tap Drill
Tap Size Pitch
10 -24 NC 25 75%
-32 NF 21 1/8 -27 NPSC 11/32
12 -24 NC 16 1/4 -18 NPSC 7/16
-28 NF 14 3/8 -18 NPSC 37/64
1/4 -20 NC 7 1/2 -14 NPSC 23/32
-28 NF 3 3/4 -14 NPSC 59/64
5/16 -18 NC F 1 -11-1/2 NPSC 1-5/32
-24 NF I 1-1/4 -11-1/2 NPSC 1-1/2
3/8 -16 NC 5/16 1-1/2 -11-1/2 NPSC 1-3/4
-24 NF Q 2 -11-1/2 NPSC 2-7/32
7/16 -14 NC U 1/16 -27 NPT/NPTF C
-20 NF 25/64 1/8 -27 NPT/NPTF Q
1/2 -13 NC 27/64 1/4 -18 NPT/NPTF 7/16
-20 NF 29/64 3/8 -18 NPT/NPTF 9/16
9/16 -12 NC 31/64 1/2 -14 NPT/NPTF 45/64
-18 NF 1/2 3/4 -14 NPT/NPTF 29/32
5/8 -11 NC 17/32 1 -11-1/2 NPT/NPTF 1-9/64
-18 NF 9/16 1-1/4 -11-1/2 NPT/NPTF 1-31/64
3/4 -10 NC 21/32 1-1/2 -11-1/2 NPT/NPTF 1-23/32
-16 NF 11/16 2 -11-1/2 NPT/NPTF 2-3/16
7/8 -9 NC 49/64
-14 NF 51/64
1 -8 NC 7/8
L
-12 NF 59/64
L63
Fax 1.262.786.3530 www.americanboltcorp.com
Bolt Clamp Loads
Suggested Assembly torque values
Approximately 50% of applied torque is needed to overcome the friction caused by the nut/bolt bearing surface being applied
against the mating joint surface. Approximately 40% of the applied torque is needed to overcome the friction of the mating thread
surfaces. Only approximately 10% of the applied torque produces tension in the bolt.
Many variables can affect the torque tension relationship. The follow are some know example of factors that can influence the
actual per-load achieved by a given application torque.
• Joint Design • Different supplemental coatings on mating parts
• The hardness and type of materials of the mating • High performance additional lubricants
joint members • Cut vs. rolled threads
• Natural variation of joint/fastener dimensions due • Interference caused by burrs, thread nicks, dirt, etc.
to manufacturing processes • Type and accuracy of tool used to tighten the fastener
• Surface finish of the parts • The speed of tightening
• Percentage of thread flank engagement • Where torque is applied (head of bolt vs. nut)
• Hole clearance • Operator influence
• Perpendicularity of the contact surfaces • Job conditions
• Supplemental coatings, thickness, and lubricity
SAE GRADE 2
Diameter & Stress Tensile Proof Clamp Torque
Threads Area Sq. Strength Load Load Dry Ft. Lub. Ft.
Per Inch In. Min. KSI. LBS. LBS. Lb. Lb.
1/4 -20 .0318 74 1,750 1,310 5.5 4.2
-28 .0364 74 2,000 1,500 6.3 4.7
5/16 -18 .0524 74 2,900 2,160 11 8
-24 .0580 74 3,200 2,400 12 9
3/8 -16 .0775 74 4,250 3,200 20 15
-24 .0878 74 4,800 3,620 23 17
7/16 -14 .1063 74 5,850 4,380 32 24
-20 .1187 74 6,550 4,490 36 27
1/2 -13 .1419 74 7,800 5,850 50 35
-20 .1599 74 8,800 6,600 55 40
9/16 -12 .1820 74 10,000 7,500 70 55
-18 .2030 74 11,200 8,400 80 60
5/8 -11 .226 74 12,400 9,320 100 75
-18 .256 74 14,100 10,560 110 85
3/4 -10 .334 74 18,400 13,800 175 130
-16 .373 74 20,500 15,390 200 140
7/8 -9 .462 60 15,200 11,430 170 125
-14 .509 60 16,800 12,600 180 140
1 -8 .606 60 20,000 15,000 250 190
-14 .679 60 22,400 16,800 280 210
1-1/8 -7 .763 60 25,200 18,900 350 270
-12 .856 60 28,200 21,200 400 300
1-1/4 -7 .969 60 32,000 24,000 500 380
-12 1.073 60 35,400 26,550 550 420
L 1-1/2 -6 1.405 60 46,400 34,800 870 650
-12 1.581 60 52,200 39,150 980 730
L64
www.americanboltcorp.com 1.800.588.1200
Bolt Clamp Loads
Suggested Assembly torque values
Any values supplied by American Bolt Corp. are intended to provide only a target torque and the only accurate way to establish a
specific pre-load is through torque tension testing of the fasteners to be used in the actual joint.
Properly fastened thread products achieve their holding power from the tension (or torque) that is derived from the matting of the
external and internal threads subject to the elastic limit of the material.
The recommended clamp loads are based on 75% of the minimum specified proof loads for each grade and size.
Torque is a twisting force. Torque is applied to your watch stem when you wind your watch. You apply torque to unscrew the
top of a mason jar. Torque causes rotation of a shaft, or it will set up a twist in a stationary shaft. It is generally expressed in foot
pounds or inch pounds.
SAE GRADE 5
Diameter & Stress Tensile Proof Clamp Torque
Threads Area Sq. Strength Load Load Dry Ft. Lub. Ft.
Per Inch In. Min. KSI. LBS. LBS. Lb. Lb.
1/4 -20 .0318 120 2,700 2,020 8 6.3
-28 .0364 120 3,100 2,320 10 7.2
5/16 -18 .0524 120 4,450 3,340 17 13
-24 .0580 120 4,900 3,700 19 14
3/8 -16 .0775 120 6,600 4,950 30 23
-24 .0878 120 7,450 5,600 35 25
7/16 -14 .1063 120 9,050 6,780 50 35
-20 .1187 120 10,100 7,570 55 40
1/2 -13 .1419 120 12,100 9,050 75 55
-20 .1599 120 13,600 10,200 85 65
9/16 -12 .1820 120 15,500 11,600 110 80
-18 .2030 120 17,300 12,950 120 90
5/8 -11 .226 120 19,200 14,400 150 110
-18 .256 120 21,800 16,350 170 130
3/4 -10 .334 120 28,400 21,300 260 200
-16 .373 120 31,700 23,780 300 220
7/8 -9 .462 120 39,300 29,450 430 320
-14 .509 120 43,300 32,450 470 350
1 -8 .606 120 51,500 38,600 640 480
-14 .679 120 57,700 43,300 720 540
1-1/8 -7 .763 105 56,500 42,300 790 590
-12 .856 105 63,300 47,500 890 670
1-1/4 -7 .969 105 71,700 53,800 1120 840
-12 1.073 105 79,400 59,600 1240 930
1-1/2 -6 1.405 105 104,000 78,000 1950 1460
-12 1.581 105 117,000 87,700 2200 1640
L
L65
Fax 1.262.786.3530 www.americanboltcorp.com
Bolt Clamp Loads
Suggested Assembly torque values
SAE GRADE 8
Diameter & Stress Tensile Proof Clamp Torque
Threads Area Sq. Strength Load Load Dry Ft. Lub. Ft.
Per Inch In. Min. KSI. LBS. LBS. Lb. Lb.
1/4 -20 .0318 150 3,800 2,850 12 9
-28 .0364 150 4,350 3,250 14 10
5/16 -18 .0524 150 6,300 4,700 24 18
-24 .0580 150 6,950 5,200 27 20
3/8 -16 .0775 150 9,300 6,980 45 35
-24 .0878 150 10,500 7,900 50 35
7/16 -14 .1063 150 12,800 9,550 70 50
-20 .1187 150 14,200 10,650 80 60
1/2 -13 .1419 150 17,000 12,750 110 80
-20 .1599 150 19,200 14,400 120 90
9/16 -12 .1820 150 21,800 16,350 150 110
-18 .2030 150 2,440 18,250 170 130
5/8 -11 .226 150 27,100 20,350 210 160
-18 .256 150 30,700 2,300 240 180
3/4 -10 .334 150 40,100 30,100 380 280
-16 .373 150 44,800 33,500 420 310
7/8 -9 .462 150 55,400 41,600 600 450
-14 .509 150 61,100 45,800 670 500
1 -8 .606 150 72,700 54,500 910 680
-14 .679 150 81,500 61,100 1020 760
1-1/8 -7 .763 150 91,600 68,700 1290 970
-12 .856 150 102,700 77,000 1440 1080
1-1/4 -7 .969 150 116,300 87,200 1820 1360
-12 1.073 150 128,800 96,600 2010 1510
1-1/2 -6 1.405 150 168,600 126,500 3160 2370
-12 1.581 150 189,700 142,200 3560 2670
L66
www.americanboltcorp.com 1.800.588.1200
Notes
www.americanboltcorp.com 1.800.588.1200
16555 West Glendale Drive
New Berlin, WI 53151
800.588.1200 262.786.6530
Fax - 262.786.3530
www.americanboltcorp.com