Professional Documents
Culture Documents
2019/BVCITS/MED/DC/02/001 Dt.12.06.19
Dear Students,
I give below the list of open elective as per JNTUK R 16 regulation in B Tech 4-1.
I advise you all to select as per your choice and inform to the undersigned the
subject that is being opted by you to take up the same accordingly.
Elective I
1. Computational Fluid Dynamics
2. Condition Monitoring
3. Additive Manufacturing
Elective II
1. Advanced Materials
2. Design for Manufacture
3. Gas Dynamics & Jet Propulsion
(Dr M M S PRASAD)
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
Dt.13.06.19
Dear Sir,
Regards,
Students of 4-1
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
2019/BVCITS/MED/DC/02/001 Dt.13.06.19
To Principal
Dear Sir,
This refers to above. I request you to give your approval on subjects ie ADDITIVE
MANUFACTURING as an Elective-I and ADVANCED MATERIALS as an Elective-II by our
B Tech 4-1students.
Regards,
(Dr M M S Prasad)
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
2019/BVCITS/MED/DC/02/001 Dt.18.11.19
Dear Students,
I give below the list of open elective as per JNTUK R 16 regulation in B Tech 3-2.
I advise you all to select as per your choice and inform to the undersigned the
subject that is being opted by you to take up the same accordingly.
OPEN ELECTIVE:
1. Entrepreneurship
2. Data Base Management System
3. Waste Water Management
4. Computer Graphics
5. Industrial Robotics
6. Green Engineering Systems
(Dr M M S PRASAD)
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
Dt.19.11.19
Dear Sir,
Regards,
Students of 3-2
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
2018/BVCITS/MED/DC/02/001 Dt.19.11.19
To Principal
Dear Sir,
This refers to above. I request you to give your approval on subject ie COMPUTER
GRAPHICS selected as an Open Elective by our B Tech 3-2students.
Regards,
(Dr M M S Prasad)
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
2019/BVCITS/MED/DC/02/002 Dt.18.11.19
Dear Students,
I give below the list of open electives as per JNTUK R 16 regulation in B Tech 3-2.
I advise you all to select as per your choice and inform to the undersigned the
subject that is being opted by you to take up the same accordingly.
Elective III
1. Thermal Equipment Design
2. Non- Destructive Evaluation
3. Quality and Reliability Engineering
(Dr M M S PRASAD)
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
Dt.19.11.19
Dear Sir,
This refers to above. We would like to opt QUALITY AND RELIABILITY ENGINEERING
as an Elective-III in this 4-2.
Regards,
Students of 4-2
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
2019/BVCITS/MED/DC/02/001 Dt.19.11.19
To Principal
Dear Sir,
This refers to above. I request you to give your approval on subject ie QUALITY AND
RELIABILITY ENGINEERING selected as an Open Elective by our B Tech 4-2students.
Regards,
(Dr M M S Prasad)
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
2020/BVCITS/MED/DC/02/001 Dt.18.08.20
Dear Students,
I give below the list of open elective as per JNTUK R 16 regulation in B Tech 4-1.
I advise you all to select as per your choice and inform to the undersigned the
subject that is being opted by you to take up the same accordingly.
Elective I
1.Computational Fluid Dynamics
2.Condition Monitoring
3.Additive Manufacturing
Elective II
4. Advanced Materials
5. Design for Manufacture
6. Gas Dynamics & Jet Propulsion
(B S S PHANI SHANKAR)
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
Dt.19.08.20
To HoD
Dear Sir,
Regards,
Students of 4-1
BVC INSTITTUTE TECHNOLOGY & SCIENCE-BATLAPALEM
2020/BVCITS/MED/DC/02/001 Dt.19.08.20
To Principal
Dear Sir,
This refers to above. I request you to give your approval on subjects ie., ADDITIVE
MANUFACTURING as an Elective-I and DESIGN FOR MANUFACTURE as an Elective-II by
our B Tech 4-1students.
Regards,
(B S S PHANI SHANKAR)