You are on page 1of 2

Republic of the Philippines

Cebu Normal University


Osmeña Blvd. Cebu City, 6000 Philippines

College of Arts & Sciences


Telephone No.: (+63 32) 254 6814 local 140
Email: cnucas@cnu.edu.ph
Website: www.cnu.edu.ph

Laboratory Exercise 1

The Compound Microscope

Name: ____________________ Class Schedule: _________________ Date: __________ Score: _____

I. Objective: To become familiar with the major parts and uses of a compound microscope.
II. Materials: Compound microscope, ruler, drawing pencil, eraser, botany books as reference, e-
books
III. Procedure: Using diagrammatic drawing of compound microscope, draw and label the parts of
a compound microscope.

Drawing:

SDF – CAS – 302 – 002 – 00 1


Registration No. 52Q18778
Certification Date: 6 August 2018
Recertification due date: 24 January 2021
For verification of the certificate please access
www.globalgroup.net

(Certification check and type the registration number)


Republic of the Philippines
Cebu Normal University
Osmeña Blvd. Cebu City, 6000 Philippines

College of Arts & Sciences


Telephone No.: (+63 32) 254 6814 local 140
Email: cnucas@cnu.edu.ph
Website: www.cnu.edu.ph

A. Answer the following.

1. What particular objective should be used when a general view of the specimen is to be
studied?
2. In connection with numbers 2, 3, and 4, what part of the microscope is referred to:
2) concentrates the light ___________________
3) reflects the light ___________________
4) regulates the amount of light ____________________
5) Type of microscope with one lens system optical instrument _____________________

B. Classify the following parts of a monocular microscope into mechanical, illuminating, and
magnifying. Put Mc before the part if it is mechanical, Il if it is illuminating and Mg if magnifying.

_____1. Revolving nosepiece

_____2. Ocular or eyepiece

_____3. Mirror

_____4. Adjustment knob

_____5. Oil immersion objective

SDF – CAS – 302 – 002 – 00 2


Registration No. 52Q18778
Certification Date: 6 August 2018
Recertification due date: 24 January 2021
For verification of the certificate please access
www.globalgroup.net

(Certification check and type the registration number)

You might also like