Professional Documents
Culture Documents
Water Heaters
Water heating by solar collectors is a typical
cal example of
stem
m is relatively
usage of the solar thermal energy. The system
perie
ence shows
simple, effective and reliable. Existing experience
pme
ent can
that properly designed high-quality equipment
0 %.
reduce annual hot water expenses by 70
e bas
Solar heating systems developed on the sis of modern
basis
o 80 %.
technologies can have efficiency up to %
°ÿô¹Ğħ
ÊÿôôØÊĩÿĞġ
ANODE
HOT WATER
INLET 1” ÿñôØĞ
CHAMBER 1/2“
HEATING WATER
OUTLET 1”
PUMP UNIT
IJ÷ĉ
INLET 1” REGUSOL 130
FROM COLLECTOR
1600
CIRCULATION 3/4“
FLANGE
SCREW PITCH ±ïØĞ÷ÿġñĉïÿüħÀйóØħ¡§ªµħ°±ª IJ÷ĉ
150 mm
INLET 1”
TO COLLECTOR
ñĞÊIJô¹ĩñÿü
CHAMBER 1/2“
COLD WATER
INLET 1”
ÿôÑħĵ¹ĩØĞ
ø 670
SOLAR SET water heater description: Solar heating system with the SOLAR SET tank connection example:
• REGUSOL 130 pump unit with the through-flow 2-15 l/min Performance:
preassembled by the manufacturer OKC 300 NTR/ OKC 300 NTRR/
Type
• one controlling unit for two heating circuits (solar and boiler) SOLAR SET SOLAR SET
• additional electrical heating unit TJ 6/4” mounting option Capacity [l] 300 295
Heater‘s hight [mm] 1600 1600
• one magnesium anode is a part of delivery; upon
Heater‘s diameter [mm] 670 670
customer‘s request it is possible to install a maintenance-
Max. weight of the heater without water [kg] 145 155
free anode made of titanium
Max. operational overpressure in the tank [MPa] 1 1
• 60 mm strong insulation made of rigid CFC-free Max. operational overpressure in the exchanger
polyurethane foam 1 1
[MPa]
• enamelled steel tank Heating surface of the solar exchanger [m2] 1,5 1,5
Heating surface of the boiler exchanger [m2] - 1
• thermosiphon brake FLOW STOP is mounted on inlet pipe
Connecting voltage 230V/50Hz 230V/50Hz
of bottom exchanger, preventing self-circulation in solar
circle Heat loss [kWh/24 h] 1,86 1,86