Professional Documents
Culture Documents
Cve163 Exam 3
Cve163 Exam 3
P = 400 kN P = 400 kN
250 mm
80 mm
80 mm
80 mm
80 mm
80 mm
230 mm
(a) (b)
Figure 1. (a) Front view of the bolted connection. (b) Side view of the bolted connection.
Suppose that the engineer changed his mind, and decided to replace the bolts with welds. He
designed the arrangement as shown in Figure 2. He wanted to use E70 fillet welds. If this is the case,
1. Find the location of the neutral axis of the weld arrangement. (2 points)
2. Find the moment of inertia of the weld arrangement. (2 points)
3. Find the resultant stress experienced by the weld on one-unit throat size. (2 points)
4. Find the required weld size. (2 points)
Republic of the Philippines
Mindanao State University - Iligan Institute of Technology
College of Engineering and Technology
Tibanga, 9200 Iligan City, P.O. Box No.5644 Tel. Nos. (063) 221-4050 Loc.4130
Direct line (063) 223-2351 E-mail: coe.dean@g.msuiit.edu.ph
Homepage: http://www.msuiit.edu.ph/coe
P = 400 kN P = 400 kN
250 mm
Figure 2. (a) Front view of the welded connection. (b) Side view of the welded connection.