Professional Documents
Culture Documents
Thermocouple & RTD
Thermocouple & RTD
RTDs are high precision devices used to measure temperature in corrosive & non corrosive
media. They are used to measure temperature from -400 °C to 600 °C. They are unequal in
performance. Stability over long period of continued use makes them unmatched for reliability.
High Alumina Ceramic Sheath Beaded Elements with metal Nipple-Union (N-U-N)
for high temp. application sheath & flange or threaded threaded thermowell
Coated with PTFE Coated with Cobalt base Flanged thermowell with
Alloy / Tungsten carbide open end ceramic tube
SPECIALITY THERMOCOUPLE
* Temperature sensors for Steam Sterilizers * Thermocouple for forging, & blast furnace
* Sensors for measurement of bearing temp. * Thermocouple for gas carburizing / salt bath
* Thermocouples with weld / pad fittings * Thermocouple for hot deep galvanizing
* Spring loaded Sensor with explosion proof housing * Thermocouple for gas turbine
* Roller type sensors for rotating machinery & turbines. * Thermocouple for rotary kiln
* Thermocouple for portable temperature indicators * Preheater / Precalciner Tower Thermocouple
Element RTD:
2 Wire / 3 Wire / 4 Wire / 6 Wire -150 – 600 °C
THERMOCOUPLE:
J (Fe / Const) 0 – 700 °C
T (Copper / Const) 0 – 400 °C
E (Chromel / Const) 0 – 800 °C
K (Chromel Alumel) 0 – 1100 °C
R (Pt / Pt – Rh 13%) 0 – 1500 °C
S (Pt / Pt – Rh 10%) 0 – 1500 °C
B (Pt – Rh 6%/ Pt – Rh 30%) 0 – 1700 °C
G,C,D (Tungsten / Rhenium) 0 – 2400 °C
Sheath Material SS 304 / SS 310 / SS 316 / Inconel 600 / SS 446 / Ceramic
Sheath O.D. 3mm to 35 mm or more
Junction Grounded / Ungrounded / Open
Insulation Mineral / Ceramic
Element Simplex / Duplex / Triplex
Termination HEAD – Flame proof or Weather Proof Cast Aluminum /SS /C.I.
Seal Pot with Male / Female Connectors
SS base plate with flying leads for Temp. Transmitters
Mounting ¼ “, 3/8 “, ½ “, ¾ “ BSP Thread / Adjustable or Fixed Flange
Termination Flame Proof or Weather Proof Head with Single, Double entry from
Cast Aluminum / Cast Iron / SS / Plastic
Seal Pot with flying leads
Seal Pot with Male / Female Connectors (QRT)
Ceramic Terminal Block with SS Base Plate
SS Base Plate with flying leads for Temperature Transmitter
ORDERING SPEICIFICATIONS:
Temperature to be measured
Type (Straight / L Shaped)
Element Type (J / T / K / E / S / R / B)
Simplex / Duplex
Insulation (Mineral / Ceramic)
Junction ( Grounded / Ungrounded / Open )
Sheath O.D.
Sheath Length
Sheath Material ( S.S. 304 / 310 / 316 / Inconel 600 / 800 / HRS 446 / C.I. / Ceramic )
Mounting ( BSP Thread / Adjustable Flange / Welded Flange )
Termination (Head – FP / WP / QRT Type etc.)
For L Shaped Thermocouple, Please mention Sheath O.D. / Length & Material for
Hot End Arm & Cold End Arm separately.
Thermocouple Assy. with Double Tube Ceramic Protection is also available for
high temp. applications