Professional Documents
Culture Documents
CIFA
EXPERTISE IN
UNDERGROUND
SITES
As one of the leading world players in the construction
equipment industry with 90 years of history, CIFA has been
designing, producing and distributing innovation in the
construction field, with a complete range of products for
the production, transportation, and laying of concrete.
10m 10m
8,8m
LEASING TRAINING FOR OPERATORS MADE IN ITALY
ACADEMY
available in Italy, Russia, China, South Africa, CIFA underground machines are designed and engineered in Italy
Australia, USA SHOTCRETE SHOTCRETE BOOM
RHINO MANTIS
2 3
STEERING MODES
latest evolution of the CIFA boom turret has a double three steering modes andtwo
CSS-series of concrete slewing ring for horizontal and mechanical speeds.
spraying equipment. Its key vertical boom rotation and can The machines are equipped 9m
distinguishing features are shift along the truck’s with a ROPS-FOPS closed
the possibility of spraying longitudinal driving cab. The driving seat 8,5 m
3m
concrete both with diesel axis to extend the working can be tilted 180°.
and electric power, its overall surface and reduce truck
compactness in driving movements. Moreover, the AIR COMPRESSOR
SHOTCRETE MACHINE
operate in a versatile, safe four-wheel drive (4WD) four- available on request.
16 m 8m
16m
4 5
STEERING RADIUS
DINGO
maneuvering in hard-to-reach every height, with only one AIR COMPRESSOR
job sites. joystick movement on the The air compressor, available
proportional radio remote as an option, makes the
BOOM control. machine independent for air
5,25 m
R 10 m 3-3,5 m
R3m
R 4,5- R 4 m
4m
1m
6 7
PORTABLE
PUMPS
RHINO The CIFA portable concrete pump series offers a wide range of models which satisfy the various needs of
concrete pumping and handling both in tunnels and above ground, over long distances and at considerable
heights. Both diesel and electric motors models are available to accommodate every application and
environment requirement. PC 607 and PC 709 are also available in crawler-mounted versions, fully equipped
RHINO is a double piston pump with S-valve and variable output for shotcrete, to work in hard-to-reach jobsites. The CIFA original pumping unit incorporates thecharacteristics of resistance,
micro-concrete, and special concrete. RHINO is a reliable choice in tight jobsites. The trailer-built concrete long life and exceptional performance with any type of concrete. The main pump is an axial piston type with
spraying pump is designed for mechanized applications of wet shotcrete in combination with the MANTIS variable flow and constant power, a gear pump is used for auxiliary services.
or for manual applications with a spraying nozzle.
• S-valve for any type of concrete, made of special steel and different thicknesses
APPLICATIONS • Rapid valve exchange
• Ideal operation even at high pressures with continuous and smooth pumping flow
Shotcrete works
• Automatic wear compensation
Concrete, grouts, structural mortars, refractory mortars
• Hydraulic system in open circuit
Self-levelling floor screeds • Low noise
Land reinforcement • Low running costs
Micro-piles, pressurized injection of mortars and cementitious slurries • Easy maintenance and quick cleaning operations
• Machines can work up to -25°
Compaction grouting
MANTIS
PCC 907/612 PC 307
R 8,8 m PCC 607/411
R3m
3,6 m
1m
MANTIS is a tracked unit for spraying concrete. It is ideal for Thanks to the sturdy telescopic boom with 4 sections, long reach
underground works or difficult-to-reach areas. Equipped with a and compact design, MANTIS can be used either for dry or wet
powerful crawler carrier, MANTIS is the best means for moving shotcrete. Two wide side doors make every component accessible
through rugged and irregular work sites with total autonomy for fast maintenance and control operations. RHINO stationary
of movement. It can work either with a diesel engine or with an concrete pumps are the perfect additionto MANTIS tracked units. PC 709/415 PC 506
electric motor. Its dual operation mode allows it to work even in PC 907/612 PC 607
areas with scarce power supply.
8 9
PUMPING DOSING
UNITS SYSTEM
The pumping units employed are specifically designed for shotcrete applications. The number of cycles per minute is optimized to reduce wear and
CIFA ACCELERATOR DOSING SYSTEM
vibrations. The S-valve is made of wear-resistant cast iron. The self-compensating wear ring and wear plate extend the machine lifetime, avoiding S-valve
Uniflux H1.0
blockages often caused by metallic or composite fibers in the shotcrete mix. The hydraulic double-circuit ensures fast and precise S-valve swinging
andoptimal concrete flow uniformity.
The UNIFLUX H1.0 admixture dosing system uses
a peristaltic pump driven by a hydraulic motor and
managed by an electronic controller allowing to dose
any type of admixture or setting accelerator to the actual
concrete flow rate with maximum precision. Manual
flow adjustment is also possible. The data setting in the
system is regulated by a display on the control panel.
PUMPING OUTPUT MAX CONCRETE CONCRETE CYCLES PER
UNIT TYPE m3/h PRESSURE DIAMETER STROKE MINUTE
bar mm mm #
UNIFLUX H1
HYDRAULIC
PUMP
UNIFLUX H1 DISPLAY
PERISTALTIC PUMP
HYDRAULIC
PUMPING MOTOR
UNIT
ADDITIVE
TANK
ADDITIVE
SUPPLY LINE
FROM 2
RHINO OPEN LOOP 80 120 700 30
TO 15
10 11
COGUARO 4
MINING MIXER
The COGUARO 4 is a mixer to featuring anti-skid 4WD and designed to deliver concrete in STEERING MODES
efficiently transport concrete 4WS capabilities. With its short the hardest-to-reach job sites
in hard-to-reach jobsites. wheelbase and high ground
It’s built to withstand harsh clearance, it can easily handle CUSTOMIZATION
environmental conditions tough off-road tracks and can ANSUL and FOGMAKER fire
and its overall robustness be driven both forward and extinguishing systems are
guarantee a long lasting reverse from its 180° tilting available. Cabin air conditioning
reliability. driving post. to ensure operator comfort is
available as an option.
CHASSIS DRUM The Coguaro can use climate-
The Coguaro is built on a With 4 cubic meters of capacity specific and low-flammability
heavy duty, low-height chassis and its low center of gravity it is oils.
2-wheel 4-wheel Crab
steering steering steering
12 13
DATA
COGUARO 4 PC 158
DRUM TECHNICAL DATA
Nominal capacity m³ 4 4-cylinder - Perkins - 04D22
Liquid cooled diesel engine
Geometric volume m³ 4.8 36.3 kW - 50 HP (Stage III A)
SHEET
Rotation speed rpm 17 Electric motor (upon request) 22 kW - 400 V 50 Hz
CSS-3 EVO
Diameter mm 1750 Infinitely adjustable output* m³/h from 2 to 15
PUMPING UNIT
TRUCK CHASSIS Max. working pressure bar 80
Theoretical output (Min ÷ Max) m³/h 5 ÷ 30
Max speed at full load km/h 15 Hopper capacity l 250
Max. pressure on concrete bar 65
Max speed without load in ascent, 30% km/h 15 Delivery distance* m 200
PLACING BOOM
Drive power - Diesel - STAGE IIIA kW 121 Delivery height* m 100
Max. vertical reach m 17
Drive power - Diesel - STAGE IV final kW 130 Chassis Manual drawbar - fixed axle
Sections n 3 and pneumatic wheels
Underground Telescopic
DOSING SYSTEM
n 1
SPECIAL EQUIPMENT
MANTIS RHINO
PLACING BOOM TECHNICAL DATA
Max. vertical reach m 7.30 4-cylinder - Perkins - 04D22
Liquid cooled diesel engine
Sections n 4 36,3 kW - 50 HP (Stage III A)
Telescopic stroke m 3 Electric motor (upon request) 22 kW - 400 V 50 Hz
TRUCK CHASSIS Infinitely adjustable output* m³/h from 2 to 15 MC 40 - 60 - 80 - 100 EI
CPC506 E
Installed Diesel power kW 18.5 IIIB Max. working pressure bar 80 Electric operating V/Hz 400/50
PUMPING UNIT
Installed electrical power kW 7.5/400V Hopper capacity l 250 Absorbed power kW 18 ÷ 50
Theoretical output (Min - Max) m³/h 50
Delivery distance* m 200 Drum diameter mm 1300 ÷ 1600
Max. pressure on concrete bar 60
Delivery height* m 100 Gauge mm 600 ÷ 900
Chassis Manual drawbar - fixed axle
and pneumatic wheels ELECTRIC OPERATING V/Hz 400/50 - 440/60 Nominal capacity m3 4 - 6 - 8 - 10
14 15
CAT_UCM_ENG_0920
Discover more at
www.cifa.com
Distributor
CIFA S.p.A.
Via Stati Uniti d’America, 26
20030 Senago (Milano) - Italy
tel. +39.02.990131
fax. +39.02.9981157
sales@cifa.com
www.cifa.com