Professional Documents
Culture Documents
1.RIPv2 send the entire routing table to all connected routers at the multicast address _______.
a) 225.255.255.255
b) 224.0.0.9
c) 225.0.0.9
d) 224.0.0.10
3.RIPV2 uses ?
a) Network ID
b) Multicast
c) Broadcast
d) Any cast
6.Which algorithm used by EIGRP for selecting and maintaining the best path to each remote network ?
a) Single
b) DUAL
c) Dijikstra
d) Bellman-Ford
7.Which of the following algorithm is used by OSPF to determine the best path from source to destination?
a) Bellmon Ford algorithm
b) Diffusing update algorithm
c) Dijkstra’s algorithm
d) Swan Optimization
9.Border Gateway Protocol (BGP) use the hop-count for shortest path, but hop-count in BGP’s case is a ________
a) router
b) AS (Autonomous System)
c) switch
d) BGP don’t use Hop-count
10.How many types of table updates are present in DSDV?
a) 3
b) 2
c) 4
d) 5
11.Which answer is wrong about The routing protocols for ad hoc wireless networks can be broadly classified into
a) Routing information update mechanism
b) Use of temporal information for routing
c) Routing topology
d) Hardware used
14.In MPLS Network, At the LAST Edge LSR, label is removed from the packet. This process is called ....
a) Pop
b) Push
c) Swap
d) PHP
15.Which one is the first protocols proposed for adhoc wireless networks?
a) Wireless routing protocol(WRP)
b) Destination sequenced distance-vector routing
c) Source-tree adaptive routing protocol (STAR)
d) Dynamic source routing protocol (DSR)
19.In the PSTN hierarchy , the class one switching centers are known as the _____ offices
a) Primary
b) Toll
c) Regional
d) End
20.In Distance Vector Routing, the routing table for each router is _____ other routers
a) The same as
b) Different from
c) Either a OR b
d) No routing table