Professional Documents
Culture Documents
inowledge Technologies
Srikakulam
Department of Mecanical Engineering
E4Sem2 Mid 1,
Year/Sem: E 4/Sem 2
AY2021-22(March-221
Subject: CAAM Date: 19.03.2022
Subject Code: |ME4231 Time: 2 Hou
Max. Marks:
40 M
Answer any four of the following, cacn quCestion carries ten marks. (4X10 = 40)
1. 1.1 What addiiional purposcs magnu"E prOcesS serves in
comparison to primary
manufacturing processes? (4M)
1.2 Enlist the requirements that demand the use of NTMs? (6M)
3. 3.1 How will you decide to recommend specific advanced machining process tor
"cutting a glass plate into two pieces (5M)
3.2 What do you understand by tl.e word "nçonventiona" in unconventiona!
machining processes? Is it justified to use this word in the context of the utilization
of these processes on the shop floor? (5M)
4. 4.0 Draw a schematic diagram of AJM system and 1abel it? (1OM)
6. 6.1 Explain the functions and suitable properties of a "horn" in USM? (4M)
6.2 USM is used for drilling a hole (under the same machining conditions) in
Aluminum and C.I. Which one will have higher depth of the dri:led hole? (6M)
1.1 What is the basic function of a calcher? What problems do you expect in the
7 absence of a catcher during WJM? (3M
7.2 How the dielectric medium is acts as a conductive channel for assisting material|
removal in EDM? (5M)
7.3 What are the uses of additives in WM? (2M)
8 8.1 When using water as dielectric during machining of high speed steel (HSS) by
EDM process, which specific problem do you expect? (5M)
8.2 In order to minimize tool wear in , which process parameters are carefully
optimized?(5M)
Rajiv Gandhi University
- Srikkulam
6128&
Departmeit of MECH
Year/Sem: E 4/Sem 2
Time: 2 Hours
Subject: Environmental Science
Subject Code: CH4201 Max. Marks: 40 M
nswer any four of the following uestions. Each question carries ten
arks. 14 X 10 = 40 M)
populations. (4M)
(b) What is deforestation. piain causes,consequences of
deforestation and explair the preventive measures to avoid
forestation. (6M)
Explain the various types of energy resources.
7
8 (al What is Mining. Explain the difíerent Types, Steps involved and
Effects of mining. (5M)
(b) Explain the Effccts of overuulization of water (5M)
Srikak lam
Department of
Mieclhaltieal Engineering
E4 Sem2_Mid 2, AY
2121-22(March-22)
Year/Sem:E 4/Sem 2
Date: 18.04.2022
Subject: Advanced Manulacturing Processes Time: 2 Hours
Subject Code: ME 4126 Max. Marks: 40 M
Answer any four of the following, each question carries ten marks. (4X10 =
40)
1. Define the terms: Passivating Vs. Non-passivating electrolyte and Sludging Vs.
Non-sludging electrolyte? (10M)
2. Define lasing action? What are the types of lasing mediums are commonly utilized
in industries for the lasrs construction? (1OM)
.
Draw a neat schematic diagram for electrochemicai irilling unit and abei it?
(10M)
6.1 State farady's laws for electrolysis? (4M)
application of EB
6.2 Explain the process of material removal, considering an
drilling? (6M)
7.1 Mention the suitable ad vantages and limitations of ChM? (7M1)
7.2 What do you understand by 'fourth state of matter ? Explain in brief. (3M)