Professional Documents
Culture Documents
Revised record
MHI CONFIDENTIAL
SPC-S4Q-373(4/7)
1. Principal Particulars of Diesel Engine
General Specification
Standard All items, unless otherwise specified, are in accordance with JIS and maker's
standards
Model Mitsubishi S4Q2
S4Q2-Z361SD
2 4 MHI No. 32C00-17610 (1/2-CHG2, 2/2-CHG2)
2 Regulations 97/68/EC Stage3A constant speed, 97/68/EC as last amended by 2004/26/EC
1 Certificate number; e11*97/68KA*2004/26*0600*01
2 1 Engine type;S4Q2 DG 22.2kW-02
Type 4 cycle water-cooled, vertical overhead valve, cylinder in line,
swirl chamber type
Number of cylinders 4
Bore × Stroke 88mm × 103mm
Piston displacement 2.505 liters
Compression ratio 22 : 1
Rotation Anti-Clockwise rotation as viewed from flywheel side
Firing order 1-3-4-2
Engine weight(Dry) Approx. 195kg
Dimensions(Length) Approx. 707mm
(Width) Approx. 504mm
(Height) Approx. 633mm
Inclination(Continuous) 15°
(Temporary) 20°(Max 30 min.)
Fuel ASTM diesel fuel oil No.2-D(JIS K2204 gas oil specification No.2 or 3)
1 Lubricating oil API classification service C䌆 or CH-4 class
Output(Without fan) Spec.Rating Rating at delivery
Breaking in around 50hr Breaking in around 0.25hr
St-by;22.2kW/1485rpm St-by;21.1kW/1485rpm
Prime;20.3kW/1485rpm Prime;19.3kW/1485rpm
(With fan St-by;21.5kW/1485rpm)
(With fan Prime;19.6kW/1485rpm)
Tolerance ±5%
Idling engine speed Max 1555rpm (Governor lever is fixed)
Speed regulation Steady state speed regulation at rated speed, within 5%
Rating conditions(Without fan) ISO 15550
Total barometric pressure : 100kPa
Air temperature :298K
Relative humidity :30%
Fuel consumption(Without fan) Approx. 260g/kW-h at Prime output (after breaking in)
Tolerance ±8%
2 1 Oil consumption Approx. 0.1䌾0.3% of fuel consumption<Reference value>@Full load, Rated speed
Fuel injection timing 17°BTDC
Mean effective pressure 0.63MPa(6.4kgf/cট)
Piston speed 5.1m/s at 1485rpm
MHI CONFIDENTIAL
SPC-S4Q-373(5/7)
Fuel system
Lubricating system
Cooling system
Cooling system Forced circulation of fresh water by centrifugal pump with thermostat
Engine water capacity Approx. 4 liters
Cooling fan 380mm diameter, 6 blades, pusher
Water pump pulley PCD 116mm
Pulley ratio 1.32 ( Crankpulley : Water pump pulley = 153 : 116 )
Fan spacer 22mm thickness
Water temp. switch Yes
Thermo. Unit No
Thermostat Open at 76.5deg.C - full open at 90deg.C
Electrical system
MHI CONFIDENTIAL
SPC-S4Q-373(6/7)
Intake and Exhaust system
<Remarks>
MHI CONFIDENTIAL
SPC-S4Q-373(7/7)
2. Engine attached items&Referece drawings
Note: Part No. and Drawing No. subject to alteration without notice.
MHI CONFIDENTIAL