Professional Documents
Culture Documents
501-14-1 501-14-1
CONTENTS PAGE
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-2 501-14-2
Descriptions and Operations
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-3 501-14-3
Diagnosis and Testing
Car Multimeter
Mechanical Electrical
● Lock mechanism ● C
entral controlled
● Link level device fuse
ar door deviates its ● C
● C ircuit
normal position ● D
oor lock control
switch
● D
oor lock actuator
3. I f y o u f i n d t h e o b v i o u s r e a s o n s f o r
observed or users' proposed failures, you
should repair them before coming to the
next step (if possible).
4. I f there is no obvious reason found by
visual inspection, then verify the failures
and go into the failure table
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-4 501-14-4
Diagnosis and Testing
Symptoms List
● C
entral control module ● R
eplace
● D
oor lock starter ● R
eplace
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-5 501-14-5
Removal and Installation
7
4
6
5
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-6 501-14-6
Removal and Installation
1 3
2
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-7 501-14-7
Removal and Installation
4. D
isconnect the connection of door lock
level and the lock cylinder.
5. Remove door outer handle.
Remove two fixed bolts of outer handle.
6. F
or installation, reverse the removal
procedures.
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-8 501-14-8
Removal and Installation
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-9 501-14-9
Removal and Installation
5. F
or installation, reverse the removal
procedures.
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-10 501-14-10
Removal and Installation
2009.06 Boomday
Handles, Locks, Latches and Entrance System
501-14-11 501-14-11
Removal and Installation
3. F
or installation, reverse the removal
procedures.
2009.06 Boomday