The document describes several products from IA that are used for fall protection systems:
1) The IA G8 Glider-8 is a shuttle that locks onto a lifeline cable to allow easy and safe movement along the line.
2) The IA Energy Absorber dissipates energy and reduces forces during falls by using a disposable absorbing element.
3) The IA Anchor Ring provides direct attachment points for tensioners, absorbers and indicators to securely mount the system.
4) The IA Tensioner and Tension Indicator ensure the lifeline cable is at the correct tension to operate properly in a fall.
The document describes several products from IA that are used for fall protection systems:
1) The IA G8 Glider-8 is a shuttle that locks onto a lifeline cable to allow easy and safe movement along the line.
2) The IA Energy Absorber dissipates energy and reduces forces during falls by using a disposable absorbing element.
3) The IA Anchor Ring provides direct attachment points for tensioners, absorbers and indicators to securely mount the system.
4) The IA Tensioner and Tension Indicator ensure the lifeline cable is at the correct tension to operate properly in a fall.
The document describes several products from IA that are used for fall protection systems:
1) The IA G8 Glider-8 is a shuttle that locks onto a lifeline cable to allow easy and safe movement along the line.
2) The IA Energy Absorber dissipates energy and reduces forces during falls by using a disposable absorbing element.
3) The IA Anchor Ring provides direct attachment points for tensioners, absorbers and indicators to securely mount the system.
4) The IA Tensioner and Tension Indicator ensure the lifeline cable is at the correct tension to operate properly in a fall.
and safely along a lifeline. A cleat locks the shuttle onto the cable preventing it from releasing accidentally. Easy to install (with one IA G8 GLIDER-8 hand) the shuttle can be connected and disconnected anywhere along the line. The Glider is made of stainless steel ZBCND 17/04 providing it with strength of 104 N/mm2.
IA Energy Absorber
The energy absorber is designed to dissipate
the energy generated and reduce the forces at the ends. Some installations do not require an absorber. The absorbing element is a IA Energy Absorber IA SA-01 disposal device which must be replaced after each fall.
IA End Swage welded
IA Swaged End ESW-933 A swaged connection ensures secure
assembly of the cable (diam. 8 mm).
IA Anchor Ring
The anchor rings (IA AR-10) are designed
for mounting on wall, ceiling, floor or between 2 walls. They guarantee optimum overall IA Anchor Ring IA AR-10 strength. They are intended to provide direct attachment for tensioners, absorbers and pretension indicators.
IA Tensioner and tension indicator to swage
The pretension indicator is a way of
Cable Tensioner with built in tension indicator IA instantly adjusting and checking the correct CTI 4827 tension of the lifeline cable. In the event of a fall, the correct tension of the cable ensures that all the components operate properly. IA Conner Bend Unit
Places the cable in such a way as to allow
IA Corner Bend Section IA CR2001 the shuttle to run through a turn. Several turns can be obtained.
IA Intermediate Cable Bracket
Designed to ensure passage of the Glider
over intermediate anchorage points without being released from the lifeline, placed at regular intervals of up to 10-15 meters. In addition, the unique design incorporates an active energy absorbing system PAS (Progressive Absorbing System) which takes up part of the generated forces in the event of a fall.
IA Intermediate Cable Bracket IA ICB-2000
IA Cable for anchorage line (Lifeline)
The cable, 8 mm in diameter with strength >37
Heavy duty 8 mm Stainless Steel wire rope cable kN, is suitable for spans of up to 10-15 IA SC SS meters between two anchors.