Professional Documents
Culture Documents
1. PROVISIONING
The provisions for this task are given in paragraph A. and in the tasks of paragraph B.
Standard tools
Description Quantity
Printed on Mar 22/2022 from C 298 76 460 9 IETP, dated Nov 30/2021.
Special tools
Not applicable
Systematic spares
Spares
Not applicable
Consumables
Description Quantity
B. Additional provisions
2. TASKS/REFERENCE DOCUMENTS
Effectivity: ALL
Special procedure
Page 201
The information in this manual is subject to the warning
given on the information page. 75-31-00-280-803-A01 Sept. 30/2014
SAFRAN HELICOPTER ENGINES
WARNING
READ AND COMPLY WITH THE SAFETY INSTRUCTIONS BEFORE ANY OPERATION ON
Printed on Mar 22/2022 from C 298 76 460 9 IETP, dated Nov 30/2021.
WARNING
3. PROCEDURE
A. Preliminary procedures
(1) Remove the bleed valve P2 pipe (Refer to Task 75-29-00-900-803).
(2) Remove the bleed valve (Refer to Task 75-31-00-900-801).
CAUTION: ALL THE ORIFICES OF THE PIPES, ACCESSORIES AND MODULES MUST BE
FITTED WITH BLANKS TO PREVENT CONTAMINATION.
Effectivity: ALL
Special procedure
Page 202
The information in this manual is subject to the warning
given on the information page. 75-31-00-280-803-A01 Sept. 30/2014
SAFRAN HELICOPTER ENGINES
NOTE: The spherical guide of bellows assy (02-120) must be introduced easily in
borehole.
(16) Install the set of seals (02-160) on the bellows assy (02-120) .
(17) Install the cover (02-180) with the bonding braid on the bellows assy (02-120) .
(18) Install the four screws (02-050) and the four washers (02-060) on the cover (02-180) .
(19) Tighten the four screws (02-050) to torque (1.8 N.m, 15.93 lbf.in).
(20) Lock the four screws (02-050) with stainless steel lockwire, dia 0.5 mm.
(21) Install the protective screen (02-070) on the bleed valve (01-010) .
(22) Install the three screws (02-072) on the protective screen (02-070) .
(23) Tighten the three screws (02-072) to torque (0.65 N.m, 5.75 lbf.in).
(24) Lock the three screws (02-072) with stainless steel lockwire, dia 0.5 mm.
(25) Introduce filter (02-040) with spring (02-020) .
(26) Install plug (02-010) with a new seal (02-030) .
(27) Tighten the plug (02-010) to torque (5 ± 0.5 N.m, 44.25 ± 4.425 lbf.in).
(28) Lock the various attaching elements with stainless steel lockwire, dia 0.5 mm.
Effectivity: ALL
Special procedure
Page 203
The information in this manual is subject to the warning
given on the information page. 75-31-00-280-803-A01 Sept. 30/2014
SAFRAN HELICOPTER ENGINES
D. Additional procedures
(1) Install the bleed valve (Refer to Task 75-31-00-900-801).
(2) Install the bleed valve P2 pipe (Refer to Task 75-29-00-900-803).
4. FINAL STEPS
Effectivity: ALL
Special procedure
Page 204
The information in this manual is subject to the warning
given on the information page. 75-31-00-280-803-A01 Sept. 30/2014
SAFRAN HELICOPTER ENGINES
Effectivity: ALL
Special procedure
Page 205
The information in this manual is subject to the warning
given on the information page. 75-31-00-280-803-A01 Sept. 30/2014
SAFRAN HELICOPTER ENGINES
Effectivity: ALL
Special procedure
Page 206
The information in this manual is subject to the warning
given on the information page. 75-31-00-280-803-A01 Sept. 30/2014