operations with the latest innovation from LJUNGSTRÖM. The AdvX™ Stack Gas Reheat system will capture and utilize excess heat from flue gas, enhancing your operational efficiency and saving you significantly.
AN EASY WAY TO TECHNOLOGY YOU CAN FEEL GOOD ABOUT
IMPROVE YOUR PLANT COUNT ON RUNNING YOUR PLANT Requiring minimal installation and Our solutions are the result of The AdvX™ Stack Gas Reheat system ongoing maintenance efforts, the endless research, development and reduces your emissions, which not AdvX™ Stack Gas Reheat system testing, ensuring that you won’t be only lowers your costs but also makes a big difference with little let down when you implement the your environmental impact. hassle. AdvX™ system in your plant.
DISCOVER THE DIFFERENCE OF THE ADVX™ STACK GAS
REHEAT SYSTEM Designed with ultimate efficiency in mind, LJUNGSTRÖM’s AdvX™ Stack Gas Reheat system will change the way your plant operates. Not only will you increase your operational flexibility, but you’ll lower your APH pluggage and maintenance costs. CLEAN STACK EFFICIENTLY AND EASILY IMPROVE YOUR HEAT RATE AND LOWER FUEL Thanks to AdvX™ Stack Gas Reheat system you can be CONSUMPTION done with expensive and time-consuming systems The AdvX™ Stack Gas Reheat system will increase such as GGH, steam reheat, FGD bypass reheat, a new your boiler efficiency with hotter air for combustion, wet stack or converting a dry stack to a wet stack. enhancing your heat rate and lowering your fuel consumption. ADVX™ STACK GAS REHEAT
CLEANING AND DRYING STACK JUST GOT A
WHOLE LOT EASIER
Introducing AdvX™ Stack Gas Reheat, a revolutionary system from
LJUNGSTRÖM, designed to make your operations more efficient, cost-effective and manageable.
The AdvX™ Stack Gas Reheat system utilizes the power of
LJUNGSTRÖM’s air preheater to recover excess heat from flue gas and use it as a heat source for stack gas reheat (SGR) after a wet flue gas desulfurization (WFGD) system. This can increase the efficiency of your boiler, and also reduce the temperature of the flue gas, which, in turn, will significantly reduce particulate emissions will also increasing mercury capture.
How the AdvX™ Stack Gas Reheat system will enhance your business:
• HOTTER COMBUSTION AIR means increased boiler efficiency and
a reduction in emissions of CO2, Hg, SOx, and particulate matter • REHEATING FLUE GAS avoids the expense of costly equipment and keeps operating costs to a minimum while offering the full benefits of dry stack operation • IMPROVED ESP PERFORMANCE significantly reduces the emissions of particulate matter while increasing mercury capture • SIGNIFICANT REDUCTION IN FGD WATER CONSUMPTION by up to 50%
LJUNGSTRÖM’s AdvX™ Stack Gas Reheat offers:
• High efficiency APH element configuration
• Increased air flows matched to plant operation • Dedicated AdvX Air duct routed to stack • Proprietary gas mixer • Fuel specific SO3 mitigation system