Professional Documents
Culture Documents
CP
EPOS 340
Op
Neerato
ELECTRONIC POWER SOURCES
w r Int
! er f
System concept Specifications
ac
EPOS 340 features four voltage signal sources and Sources Separately and independently configurable
e
three current signal sources. The signal characteristics Frequency range DC...3 kHz
are computed by a high-performance signal processor Transient signals DC...4 kHz
and output via high-accuracy D/A converters and
Phase angle 0...360°
electronic power amplifiers. The amplitude, phase and
Voltage amplifiers 2 switchable output ranges
frequency can be varied widely during output.
300 V output range 4-ph.: 4 x 0...300 V / 75 VA
1-ph.: 1 x 0...600 V / 150 VA
150 V output range 4-ph.: 4 x 0...150 V / 75 VA
1-ph.: 1 x 0...300 V / 150 VA
Current amplifiers 3-ph.: 3 x 0...16 A / 40 VA
Technical specifications subject to change without prior notice | 201511 | © KoCoS Messtechnik AG
DC output 12...260 V, overload and short-circuit
protection
Output power 50 W (constant across the range)
Analog inputs Measuring ranges 8 x 0...±10 V
Binary inputs Configurable as potential-free/potential-
carrying contacts
Quantity / Groups 8/2
Binary outputs 2 potential-free and galvanically isolated
output relays
Operation Touch screen, jog wheel, membrane keypad
with 2 function keys, PC
Signal sources
4 independent voltage channels up to 300 V
Display
Interfaces
High-resolution, resistive 3.5“ touch screen
USB-B, RJ45 (Ethernet) EPOS 340
3 independent current channels up to 16 A Supply voltage 100...265 VAC / 120...265 VDC / 47...63 Hz The multi-functional three-phase signal
Housing Portable 19” housing, 3 U
generator!
Synthetic signal generation
Dimensions 470 x 162 x 316 mm (W x H x D) EPOS 340 is the multi-functional three-phase generator
Wide frequency range
Weight 12 kg which comes into its own whenever maximum power and
Freely selectable signal shapes high signal accuracy are required.
Play-back of transient signal characteristics KoCoS Middle East
Intelligent amplifier technology and fully synthetic signal
Flat 36, Bldg 1046
Generation of any flicker signal generation make it possible to issue any signal shape
Road 3019, Block 330
P.O. Box 65453 across a wide frequency range or even to play back
High accuracy
Zinj, Bahrain complex transient signal characteristics. EPOS 340 is
Very low THD Tel. +973 17300768 designed for use as a stand-alone device or for operation
info@me.kocos.com with an external PC.
Separate auxiliary power supply
For more information, go to:
.
000 Ergonomic jog wheel for fast, easy settings
are available in standard COMTRADE format. 00:00 0
00
00:00 An illuminated ring and acoustic signals
During tests these signal characteristics are then 300 V
dU (V)
•
.
“played back“ as transient signal waveforms by indicate system status during settings and output
12 A
EPOS. • dI (A)
USB and Ethernet interface for direct connection
.
12 A
The TRANSIG-monitor also includes a signal editor to PCs and networks
1A A 300 V • dPhi
1
.
1A
which can be used to configure and calculate any Smart touch technology for easy operation
(Hz)
signal characteristic. The signal characteristics can • df User actions, such as amplitude, phase angle
be generated from a basic function, such as a sine or frequency adjustments, are processed in
Imax: 16A
.
Select
wave, with one or more superimposed functions, 12 A Umax: 300 V Monitor real time and executed without delay
such as a direct component, exponential functions, 300 V
Settings can be selected from templates
harmonics, etc.
Preset 1
Default
VD Static
Programming interface Limits
Device
interface for special requirements, e.g. for use with V 5 V
or in .NET environments. 16 A
Frequecy
200
Hz