Professional Documents
Culture Documents
Units New
RoHS
Modular Design
with Uniform Body Style
AC Series
CAT.EUS40-69A-UK
Modular F.R.L. Units AC Series
Transparent
bowl guard 2-layer Previous model
construction
Pressure
Use of transparent bowl guard makes it Air Filter Mist Separator Micro Mist Filter Lubricator
possible to check the condensate inside the AF AFM Separator Regulator AL
AFD AW0(K)
filter bowl and the remaining oil amount in the
lubricator from the entire periphery.
Filter element
Bowl
1
Modular F.R.L. Units AC Series
Open the gauge cover in Adjust the indicator using a Close the gauge cover in the
the direction of the arrow flat blade screwdriver. direction of the arrow and
with fingertips. push it in until it clicks in place.
Easy to handle
Easy to hold when
unlocked
Finger grip
Interchangeability is maintained.
· The mounting pitch for panel mounting is interchangeable
between AR(K) and AR(K)-B, and AW(K) and AW(K)-B.
· Brackets and set nuts are common to
existing and new products.
2
Modular F.R.L. Units AC Series
Series Configuration
Port size
1/8 1/4 3/8 1/2
Size 20
Size 30
Size 40
3
Modular F.R.L. Units AC Series
p. 30 p. 30
p. 44 p. 44 p. 60 p. 60
Lubricator
New Spacer AL Series
p. 54
Port size
Interchangeable with existing model 1/8 1/4 3/8 1/2
Size 20
¡New spacer can be connected to the existing AF-A, AR-B, AL-A, AW-B series.
¡Existing spacer can be connected to the new AF-D, AR(K)-D, AL-D, AW(K)-D series. Size 30
Size 40
4
Air Combination
AC20-D to AC40-D 1 2
How to Order
· Option/Semi-standard: Select one each for a to i.
AC 30 03 DE D · Option/Semi-standard symbol:
When more than one specification is required, indicate in
q w e r t alphanumeric order.
Example) AC30-F03DE1-16NR-D
q
Symbol Description Body size
20 30 40
— Rc
w
Pipe thread type N∗1 NPT
F∗2 G
+
01 1/8 — —
02 1/4
e
Port size
03 3/8 —
04 1/2 — —
+
— Without auto drain
Float type
a
auto drain
C∗4 N.C. (Normally closed) Drain port is closed when pressure is not applied.
D∗5 N.O. (Normally open) Drain port is open when pressure is not applied. —
+
— Without pressure gauge
Option∗3
5
Air Combination AC20-D to AC40-D Series
AC
AC30-D
AF + AR + AL
q
Symbol Description Body size
20 30 40
— Relieving type
g Exhaust mechanism
N Non-relieving type
+
Semi-standard
AW + AL
— Flow direction: Left to right
h Flow direction
t
R Flow direction: Right to left
+
— Unit on product label: MPa, °C, Pressure gauge in SI units: MPa
i Unit Z∗15 Unit on product label: psi, °F, Pressure gauge: MPa/psi dual scale ∗17 ∗17 ∗17
ZA∗16 Digital pressure switch: With unit selection function ∗18 ∗18 ∗18
∗1 Drain guide is NPT1/8 (applicable to the AC20-D) ∗6 When the pressure gauge is attached, a 1.0 MPa cock of a lubricator will be with barb fittings.
AF + AR
and NPT1/4 (applicable to the AC30-D to AC40-D). pressure gauge will be fitted for standard (0.85 MPa) ∗15 For pipe thread type: NPT
The auto drain port comes with a Ø 3/8" One-touch type. 0.4 MPa pressure gauge for 0.2 MPa type. This product is for overseas use only according to
fitting (applicable to the AC30-D to AC40-D). ∗7 Pressure can be set higher than the specification the new Measurement Act. (The SI unit type is
∗2 Drain guide is G1/8 (applicable to the AC20-D) and pressure in some cases, but use pressure within the provided for use in Japan.)
G1/4 (applicable to the AC30-D to AC40-D). specification range. Cannot be used with M: Round type pressure gauge
∗3 Options G and M are not assembled and supplied ∗8 Refer to chemical data on pages 38 and 59 for (with colour zone). Available by request for special.
loose at the time of shipment. chemical resistance of the bowl. The digital pressure switch will be equipped with the
∗4 When pressure is not applied, condensate which ∗9 A bowl guard is provided as standard equipment unit selection function, setting to psi initially.
AF + AFM + AR
does not start the auto drain mechanism will be left in (polycarbonate). ∗16 For options: E1, E2, E3, E4
the bowl. Releasing the residual condensate before ∗10 A bowl guard is provided as standard equipment (nylon). This product is for overseas use only according to the
ending operations for the day is recommended. ∗11 The combination of float type auto drain C and D is new Measurement Act. (The SI unit is provided for
∗5 If the compressor is small (0.75 kW, discharge flow is not available. use in Japan.)
less than 100 l/min (ANR)), air leakage from the drain ∗12 Without a valve function ∗17 : For pipe thread type: NPT only
cock may occur during the start of operations. N.C. ∗13 The combination of metal bowl 2 and 8 is not available. ∗18 : Select with options: E1, E2, E3, E4.
type is recommended. ∗14 When choosing with W: Air filter drain port, the drain
Standard Specifications
Model AC20-D AC30-D AC40-D
AW + AFM
Air Filter [AF] AF20-D AF30-D AF40-D
Component Regulator [AR] AR20-D AR30-D AR40-D
Lubricator [AL] AL20-D AL30-D AL40-D
Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2
Pressure gauge port size∗1 [AR] 1/8
Fluid Air
Ambient and fluid temperatures∗2 -5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
AF
Max. operating pressure 1.0 MPa
Auto drain minimum N.C. [AF] 0.1 MPa 0.15 MPa
operating pressure N.O. [AF] — 0.1 MPa AFM / AFD
Set pressure range [AR] 0.05 to 0.85 MPa
Nominal filtration rating∗3 [AF] 5 μm
Compressed air purity class∗4 ISO 8573-1:2010 [ 6 : 4 : − ]∗5
Drain capacity [AF] 8 cm3 25 cm3 45 cm3
Port size 1/4: 30 l/min (ANR)
Port size 1/4: 30 l/min (ANR)
Minimum dripping flow rate∗6 [AL] 15 l/min (ANR) Port size 3/8: 40 l/min (ANR)
AR
∗3 [Compliant to test condition ISO 8573-4:2001 and test method ISO 12500-3:2009]
Conditions: New element. Flow capacity, inlet pressure, and the amount of solid bodies at the filter inlet are stable.
∗4 The compressed air purity class is indicated based on ISO 8573-1:2010 Compressed air – Part 1: Contaminants and purity classes.
For details on this standard, refer to page 37.
∗5 The compressed air quality class on the inlet side is [ 7 : 4 : 4 ].
∗6 · The flow rate is 5 drops or greater/min under the following conditions: Inlet pressure of 0.5 MPa; Class 1 turbine oil (ISO VG32); Temperature at 20 °C; Oil adjustment valve fully open.
· For a circuit that repeatedly turns ON and OFF on the outlet side, make the adjustment so that the average air consumption per minute becomes the minimum dripping flow rate or more.
6
AC20-D to AC40-D Series
0.8 0.8
0.7 0.7
Outlet pressure [MPa]
0.5 0.5
0.4 0.4
0.3 0.3
0.2 0.2
0.1 0.1
0 0
0 500 1000 1500 2000 0 1000 2000 3000 4000
Flow rate [l/min (ANR)] Flow rate [l/min (ANR)]
AC40-D Rc1/2
0.8
0.7
Outlet pressure [MPa]
0.6
0.5
0.4
0.3
0.2
0.1
0
0 1000 2000 3000 4000 5000 6000 7000
Flow rate [l/min (ANR)]
Pressure Characteristics (Representative values) Inlet pressure of 0.7 MPa, Outlet pressure of 0.2 MPa, Flow rate 20 l/min (ANR)
AC20-D AC30-D
0.25 0.25
Outlet pressure [MPa]
0.2 0.2
0.15 0.15
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Inlet pressure [MPa] Inlet pressure [MPa]
AC40-D
0.25
Outlet pressure [MPa]
Set point
0.2
0.15
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Inlet pressure [MPa]
7
Air Combination AC20-D to AC40-D Series
AC
Be sure to read this before handling the products. Refer to the back cover for safety instructions. For F.R.L. units
precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual”, https://www.smc.eu
AF + AR + AL
Air Supply Selection
Caution Warning
1. Use an air filter with 5 μm or less filtration rating on the inlet side of 1. Piping load and moment
the valve to avoid any damage to the seat caused by dust when Avoid excessive torsional moment or bending moment other than
mounting a pressure relief 3-port valve on the inlet side. those caused by the equipment’s own weight, as this can cause
AW + AL
damage.
Support external piping separately.
Mounting/Adjustment If moment applied to the equipment is unavoidable during
operation, the moment should be lower than the maximum moment
Caution shown below.
Piping materials without flexibility, such as steel tube piping, are
1. When the bowl is installed on the air filter, filter regulator, lubricator, prone to be affected by excess moment loads and vibrations from
AF + AR
mist separator, or micro mist separator (AC20-D to AC40-D), install the piping side. Use flexible tubing in between to avoid such effects.
them so that the lock button lines up to the groove of the front (or Unit: N·m
the back) of the body to avoid drop or damage of the bowl. Applicable model AC20 AC30 AC40
Maximum moment (M) 14.5 16 19.5
Maximum moment (M) = Length (L) x Load (F)
Groove of the body
Length (L)
AF + AFM + AR
Lock button
AW + AFM
2. Tighten the two set screws on the spacer with bracket and spacer
evenly.
Tighten them to the recommended tightening torque. Load (F)
Insufficient tightening torque may cause loosening or defective 2. Float type auto drain
sealing. Excessive tightening torque may damage the thread, etc. Operate under the following conditions to avoid malfunction.
Recommended Torque Unit: N·m <N.O. type>
Applicable model AC20 AC30 AC40 • Operating compressor: 0.75 kW (100 l/min (ANR)) or more
Spacer with When using 2 or more auto drains, multiply the value above by
Y200T-D Y300T-D Y400T-D
AF
bracket part no. the number of auto drains to find the capacity of the compressors
Spacer part no. Y200-D Y300-D Y400-D you will need.
Torque 0.33 to 0.39 1.0 to 1.2 1.0 to 1.2 For example, when using 2 auto drains, 1.5 kW (200 l/min (ANR))
of the compressor capacity is required. AFM / AFD
• Operating pressure: 0.1 MPa or more
Spacer with bracket <N.C. type>
• Operating pressure for AD27-D: 0.1 MPa or more
Holding screw Operating pressure for AD37-D/AD47-D: 0.15 MPa or more
3. Use a regulator or filter regulator with backflow function when
mounting a pressure relief 3-port valve on the inlet side to ensure
the release of the residual pressure. Otherwise, residual pressure
AR
Caution
1. When releasing air at the intermediate position using a T-spacer on
AL
Dimensions
AC20-D
A
F N
J M S
C
V1
Q1 Q1
K
IN OUT
Q2
V2
2 x P1
Port size
B
U
P2
Clearance for
maintenance
AC30-D
A
F N
J M S
R
V1
Q1
C
K
IN OUT
Q1
V2
2 x P1
Port size U
B
E P2
Clearance for
maintenance
AC40-D
A
F N
J M S
R
V1
Q1
IN OUT
Q1
Q2
V2
2 x P1
Port size
B
E P2
Clearance for
maintenance
9
Air Combination AC20-D to AC40-D Series
AC
Optional specifications
Applicable
model Square embedded type Round type pressure Round type pressure
Digital pressure switch
pressure gauge gauge gauge (with colour zone)
AF + AR + AL
J J J
AC20-D
H
H
to Centre of
H
Centre of piping
AC40-D Centre of piping
piping
AW + AL
Optional specifications Semi-standard
Applicable PC/PA bowl Metal bowl Metal bowl with level gauge
model With auto drain Drain cock with barb
With drain guide With drain cock With drain guide With drain cock With drain guide
fitting
B
B
AF + AR
B
AC20-D
M5 x 0.8 1/8 1/8
Width across flats 14 Width across flats 14
AF + AFM + AR
N.O.: Black
N.C.: Grey
B
B
B
B
AC30-D
B
to
AC40-D Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting
AW + AFM
Standard specifications
Model Bracket mount
P1 P2 A B C E F G J K M N Q1 Q2 R S U V1 V2
AC20-D 1/8, 1/4 1/8 126.4 87.6 35.9 — 41.6 60 21 2 30 43.2 24 33 5.5 11.5 3.5 29 38
AC30-D 1/4, 3/8 1/8 167.4 115.4 38.1 30 55.1 80 26.5 3.5 41 57.2 35 — 7 14 6 42.5 42.5
AC40-D 1/4, 3/8, 1/2 1/8 220.4 147.1 44 38.4 72.6 110 35.5 0 50 75.2 40 55 9 18 7 50 65
AF
Optional specifications Semi-standard specifications
Square Round type Round type Metal bowl with
Round type With PC/PA bowl Metal bowl
embedded Digital pressure pressure pressure level gauge
Model pressure auto
type pressure switch gauge (Semi- gauge (with AFM / AFD
gauge drain With barb With drain With drain With drain With drain With drain
gauge standard: Z) colour zone) fitting guide cock guide cock guide
H J H J H J H J H J B B B B B B B
AC20-D 28 27 27.8 37.5 Ø 37.5 57.5 Ø 37.5 58.5 Ø 37.5 58.5 104.9 — 91.4 87.4 93.9 — —
AC30-D 28 32.5 27.8 43 Ø 37.5 63 Ø 37.5 64 Ø 37.5 64 157.1 123.9 122.2 117.8 122.3 137.8 142.3
AC40-D 28 41.5 27.8 52 Ø 42.5 73 Ø 42.5 73 Ø 42.5 73 186.9 155.6 153.9 149.5 154 169.5 174
AR
AL
AW
10
Air Combination
AC20A-D to AC40A-D 1 2
How to Order
· Option/Semi-standard: Select one each for a to i.
AC 30 A 03 DE D · Option/Semi-standard symbol:
When more than one specification is required, indicate in
q w e r t alphanumeric order.
Example) AC30A-F03DE1-16NR-D
q
Symbol Description Body size
20 30 40
— Rc
w
Pipe thread type N∗1 NPT
F∗2 G
+
01 1/8 — —
02 1/4
e
Port size
03 3/8 —
04 1/2 — —
+
— Without auto drain
Float type
a
auto drain
C∗4 N.C. (Normally closed) Drain port is closed when pressure is not applied.
D∗5 N.O. (Normally open) Drain port is open when pressure is not applied. —
+
— Without pressure gauge
Option∗3
11
Air Combination AC20A-D to AC40A-D Series
AC
AC30A-D
AC30A D
AF + AR + AL
q
Symbol Description Body size
20 30 40
— Flow direction: Left to right
Semi-standard
h Flow direction
R Flow direction: Right to left
+
t
AW + AL
— Unit on product label: MPa, °C, Pressure gauge in SI units: MPa
i Unit Z∗15 Unit on product label: psi, °F, Pressure gauge: MPa/psi dual scale ∗17 ∗17 ∗17
ZA∗16 Digital pressure switch: With unit selection function ∗18 ∗18 ∗18
∗1 Drain guide is NPT1/8 (applicable to the AC20A-D) ∗6 When the pressure gauge is attached, a 1.0 MPa ∗14 When choosing with W: Filter regulator drain port,
and NPT1/4 (applicable to the AC30A-D to pressure gauge will be fitted for standard (0.85 MPa) the drain cock of a lubricator will be with barb
AC40A-D). The auto drain port comes with a Ø 3/8" type. 0.4 MPa pressure gauge for 0.2 MPa type. fittings.
One-touch fitting (applicable to the AC30A-D to ∗7 Pressure can be set higher than the specification ∗15 For pipe thread type: NPT
AC40A-D). pressure in some cases, but use pressure within the This product is for overseas use only according to
AF + AR
∗2 Drain guide is G1/8 (applicable to the AC20A-D) and specification range. the new Measurement Act. (The SI unit type is
G1/4 (applicable to the AC30A-D to AC40A-D). ∗8 Refer to chemical data on pages 59 and 68 for provided for use in Japan.)
∗3 Options G and M are not assembled and supplied chemical resistance of the bowl. Cannot be used with M: Round type pressure gauge
loose at the time of shipment. ∗9 A bowl guard is provided as standard equipment (with colour zone). Available by request for special.
∗4 When pressure is not applied, condensate which (polycarbonate). The digital pressure switch will be equipped with the
does not start the auto drain mechanism will be left in ∗10 A bowl guard is provided as standard equipment unit selection function, setting to psi initially.
the bowl. Releasing the residual condensate before (nylon). ∗16 For options: E1, E2, E3, E4
ending operations for the day is recommended. ∗11 The combination of float type auto drain C and D is This product is for overseas use only according to the
AF + AFM + AR
∗5 If the compressor is small (0.75 kW, discharge flow is not available. new Measurement Act. (The SI unit is provided for
less than 100 l/min (ANR)), air leakage from the drain ∗12 Without a valve function use in Japan.)
cock may occur during the start of operations. N.C. ∗13 The combination of metal bowl 2 and 8 is not ∗17 : For pipe thread type: NPT only
type is recommended. available. ∗18 : Select with options: E1, E2, E3, E4.
Standard Specifications
Model AC20A-D AC30A-D AC40A-D
AW + AFM
Filter Regulator [AW] AW20-D AW30-D AW40-D
Component
Lubricator [AL] AL20-D AL30-D AL40-D
Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2
Pressure gauge port size∗1 [AW] 1/8
Fluid Air
Ambient and fluid temperatures∗2 −5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
AF
Auto drain minimum N.C. [AW] 0.1 MPa 0.15 MPa
operating pressure N.O. [AW] — 0.1 MPa
Set pressure range [AW] 0.05 to 0.85 MPa AFM / AFD
Nominal filtration rating∗3 [AW] 5 μm
Compressed air purity class∗4 ISO 8573-1:2010 [ 6 : 4 : − ]∗5
Drain capacity [AW] 8 cm3 25 cm3 45 cm3
Port size 1/4: 30 l/min (ANR)
Port size 1/4: 30 l/min (ANR)
Minimum dripping flow rate∗6 [AL] 15 l/min (ANR) Port size 3/8: 40 l/min (ANR)
Port size 3/8: 40 l/min (ANR)
Port size 1/2: 50 l/min (ANR)
AR
Conditions: New element. Flow capacity, inlet pressure, and the amount of solid bodies at the filter inlet are stable.
∗4 The compressed air purity class is indicated based on ISO 8573-1:2010 Compressed air – Part 1: Contaminants and purity classes.
For details on this standard, refer to page 37.
∗5 The compressed air quality class on the inlet side is [ 7 : 4 : 4 ].
∗6 · The flow rate is 5 drops or greater/min under the following conditions: Inlet pressure of 0.5 MPa; Class 1 turbine oil (ISO VG32); Temperature at 20 °C; Oil adjustment valve fully open.
· For a circuit that repeatedly turns ON and OFF on the outlet side, make the adjustment so that the average air consumption per minute becomes the minimum dripping flow
rate or more.
12
AC20A-D to AC40A-D Series
Dimensions
AC20A-D A
F
J M S
R
C
V1
K
Q 1 Q1
IN OUT
2 x P1 Q2
Port size V2
B
U
P2
Clearance for
maintenance
AC30A-D A
F
J M R S
C
V1
Q1
K
IN OUT
Q1
V2
2 x P1
Port size U
B
E P2
Clearance for
maintenance
AC40A-D A
F
J M S
R
C
V1
Q1
IN OUT
Q1
Q2
V2
2 x P1
Port size
B
E P2
Clearance for
maintenance
13
Air Combination AC20A-D to AC40A-D Series
AC
Optional specifications
Applicable
model Square embedded type Round type pressure Round type pressure
Digital pressure switch
pressure gauge gauge gauge (with colour zone)
AF + AR + AL
J J J
AC20A-D
H
H
to Centre of
H
Centre of piping
AC40A-D Centre of piping
piping
AW + AL
Optional specifications Semi-standard
Applicable PC/PA bowl Metal bowl Metal bowl with level gauge
model With auto drain Drain cock with barb
With drain guide With drain cock With drain guide With drain cock With drain guide
fitting
B
B
AF + AR
B
AC20A-D
M5 x 0.8 1/8 1/8
Width across flats 14 Width across flats 14
AF + AFM + AR
N.O.: Black
N.C.: Grey
B
B
B
B
AC30A-D
B
to
AC40A-D Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting
AW + AFM
Standard specifications
Model Bracket mount
P1 P2 A B C E F G J K M Q1 Q2 R S U V1 V2
AC20A-D 1/8, 1/4 1/8 83.2 87.6 71.8 — 41.6 60 21 5 30 24 33 5.5 11.5 3.5 29 38
AC30A-D 1/4, 3/8 1/8 110.2 115.3 86.5 30 55.1 80 26.5 3.5 41 35 — 7 14 6 42.5 42.5
AC40A-D 1/4, 3/8, 1/2 1/8 145.2 147.1 91.5 38.4 72.6 110 35.5 0 50 40 55 9 18 7 50 65
AF
Optional specifications Semi-standard specifications
Square Round type Round type Metal bowl with
Round type With PC/PA bowl Metal bowl
embedded Digital pressure pressure pressure level gauge
Model pressure auto
type pressure switch gauge (Semi- gauge (with AFM / AFD
gauge drain With barb With drain With drain With drain With drain With drain
gauge standard: Z) colour zone) fitting guide cock guide cock guide
H J H J H J H J H J B B B B B B B
AC20A-D 28 27 27.8 37.5 Ø 37.5 57.5 Ø 37.5 58.5 Ø 37.5 58.5 104.9 — 91.4 87.4 93.9 — —
AC30A-D 28 32.5 27.8 43 Ø 37.5 63 Ø 37.5 64 Ø 37.5 64 157.1 123.9 122.2 117.8 122.3 137.8 142.3
AC40A-D 28 41.5 27.8 52 Ø 42.5 73 Ø 42.5 73 Ø 42.5 73 186.9 155.6 153.9 149.5 154 169.5 174
AR
AL
AW
14
Air Combination
AC20B-D to AC40B-D 1 2
How to Order
· Option/Semi-standard: Select one each for a to h.
AC 30 B 03 DE D · Option/Semi-standard symbol:
When more than one specification is required, indicate in
q w e r t alphanumeric order.
Example) AC30B-F03DE1-16NR-D
q
Symbol Description Body size
20 30 40
— Rc
w
Pipe thread type N∗1 NPT
F∗2 G
+
01 1/8 — —
02 1/4
e
Port size
03 3/8 —
04 1/2 — —
+
— Without auto drain
Float type
a
auto drain
C∗4 N.C. (Normally closed) Drain port is closed when pressure is not applied.
D∗5 N.O. (Normally open) Drain port is open when pressure is not applied. —
+
— Without pressure gauge
Option∗3
15
Air Combination AC20B-D to AC40B-D Series
AC
AC30B-D
AF + AR + AL
q
Symbol Description Body size
20 30 40
— Flow direction: Left to right
Semi-standard
g Flow direction
R Flow direction: Right to left
+
t
AW + AL
— Unit on product label: MPa, °C, Pressure gauge in SI units: MPa
h Unit Z∗14 Unit on product label: psi, °F, Pressure gauge: MPa/psi dual scale ∗16 ∗16 ∗16
ZA∗15 Digital pressure switch: With unit selection function ∗17 ∗17 ∗17
∗1 Drain guide is NPT1/8 (applicable to the AC20B-D) ∗6 When the pressure gauge is attached, a 1.0 MPa available.
and NPT1/4 (applicable to the AC30B-D to AC40B-D). pressure gauge will be fitted for standard (0.85 MPa) ∗14 For pipe thread type: NPT
The auto drain port comes with a Ø 3/8" One-touch type. 0.4 MPa pressure gauge for 0.2 MPa type. This product is for overseas use only according to
fitting (applicable to the AC30B-D to AC40B-D). ∗7 Pressure can be set higher than the specification the new Measurement Act. (The SI unit type is
∗2 Drain guide is G1/8 (applicable to the AC20B-D) and pressure in some cases, but use pressure within the provided for use in Japan.)
AF + AR
G1/4 (applicable to the AC30B-D to AC40B-D). specification range. Cannot be used with M: Round type pressure gauge
∗3 Options G and M are not assembled and supplied ∗8 Refer to chemical data on page 38 for chemical (with colour zone). Available by request for special.
loose at the time of shipment. resistance of the bowl. The digital pressure switch will be equipped with the
∗4 When pressure is not applied, condensate which ∗9 A bowl guard is provided as standard equipment unit selection function, setting to psi initially.
does not start the auto drain mechanism will be left in (polycarbonate). ∗15 For options: E1, E2, E3, E4
the bowl. Releasing the residual condensate before ∗10 A bowl guard is provided as standard equipment This product is for overseas use only according to the
ending operations for the day is recommended. (nylon). new Measurement Act. (The SI unit is provided for
∗5 If the compressor is small (0.75 kW, discharge flow is ∗11 The combination of float type auto drain C and D is use in Japan.)
AF + AFM + AR
less than 100 l/min (ANR)), air leakage from the drain not available. ∗16 : For pipe thread type: NPT only
cock may occur during the start of operations. N.C. ∗12 Without a valve function ∗17 : Select with options: E1, E2, E3, E4.
type is recommended. ∗13 The combination of metal bowl 2 and 8 is not
Standard Specifications
Model AC20B-D AC30B-D AC40B-D
Air Filter [AF] AF20-D AF30-D AF40-D
Component
AW + AFM
Regulator [AR] AR20-D AR30-D AR40-D
Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2
Pressure gauge port size∗1 [AR] 1/8
Fluid Air
Ambient and fluid temperatures∗2 −5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
Auto drain minimum N.C. [AF] 0.1 MPa 0.15 MPa
AF
operating pressure N.O. [AF] — 0.1 MPa
Set pressure range [AR] 0.05 to 0.85 MPa
Nominal filtration rating∗3 [AF] 5 μm AFM / AFD
Compressed air purity class∗4 ISO 8573-1:2010 [ 6 : 4 : 4 ]∗5
Drain capacity [AF] 8 cm3 25 cm3 45 cm3
Bowl material [AF] Polycarbonate
Bowl guard [AF] Semi-standard (Steel) Standard (Polycarbonate)
Construction [AR] Relieving type
Weight 0.25 kg 0.51 kg 0.95 kg
AR
∗1 Pressure gauge connection threads are not available for F.R.L. unit with a square embedded type pressure gauge or with a digital pressure switch.
∗2 –5 to 50 °C for the products with the digital pressure switch
∗3 [Compliant to test condition ISO 8573-4:2001 and test method ISO 12500-3:2009]
Conditions: New element. Flow capacity, inlet pressure, and the amount of solid bodies at the filter inlet are stable.
∗4 The compressed air purity class is indicated based on ISO 8573-1:2010 Compressed air – Part 1: Contaminants and purity classes.
AL
16
AC20B-D to AC40B-D Series
Dimensions
AC20B-D
A
F
J M S P2
(Pressure gauge port size)
R
V1
Q1 Q1
C
K
IN OUT
Q2
V2
2 x P1
Port size
B
U
Clearance for
maintenance
Drain
G
AC30B-D
A
F
J M S P2
(Pressure gauge port size)
R
V1
Q1
C
K
IN OUT
Q1
V2
2 x P1
Port size
U
E
Clearance for
maintenance
Drain
G
AC40B-D
A
F
J M S P2
(Pressure gauge port size)
R
V1
Q1
IN OUT
Q1
Q2
V2
2 x P1
Port size
B
E
Clearance for
maintenance
Drain
G
17
Air Combination AC20B-D to AC40B-D Series
AC
Optional specifications
Applicable
model Square embedded type Round type pressure Round type pressure
Digital pressure switch
pressure gauge gauge gauge (with colour zone)
AF + AR + AL
J J J
AC20B-D
H
H
to Centre of
H
Centre of piping
AC40B-D Centre of piping
piping
AW + AL
Optional specifications Semi-standard
Applicable PC/PA bowl Metal bowl Metal bowl with level gauge
model With auto drain Drain cock with barb
With drain guide With drain cock With drain guide With drain cock With drain guide
fitting
B
B
AF + AR
B
AC20B-D
M5 x 0.8 1/8 1/8
Width across flats 14 Width across flats 14
AF + AFM + AR
N.O.: Black
N.C.: Grey
B
B
B
B
AC30B-D
B
to
AC40B-D Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting
AW + AFM
Standard specifications
Model Bracket mount
P1 P2 A B C E F G J K M Q1 Q2 R S U V1 V2
AC20B-D 1/8, 1/4 1/8 83.2 87.6 26.5 — 41.6 25 21 2 30 24 33 5.5 11.5 3.5 29 38
AC30B-D 1/4, 3/8 1/8 110.2 115.4 30.5 30 55.1 35 26.5 3.5 41 35 — 7 14 6 42.5 42.5
AC40B-D 1/4, 3/8, 1/2 1/8 145.2 147.1 35.5 38.4 72.6 40 35.5 0 50 40 55 9 18 7 50 65
AF
Optional specifications Semi-standard specifications
Square Round type Round type Metal bowl with
Round type With PC/PA bowl Metal bowl
embedded Digital pressure pressure pressure level gauge
Model pressure auto
type pressure switch gauge (Semi- gauge (with AFM / AFD
gauge drain With barb With drain With drain With drain With drain With drain
gauge standard: Z) colour zone) fitting guide cock guide cock guide
H J H J H J H J H J B B B B B B B
AC20B-D 28 27 27.8 37.5 Ø 37.5 57.5 Ø 37.5 58.5 Ø 37.5 58.5 104.9 — 91.4 87.4 93.9 — —
AC30B-D 28 32.5 27.8 43 Ø 37.5 63 Ø 37.5 64 Ø 37.5 64 157.1 123.9 122.2 117.8 122.3 137.8 142.3
AC40B-D 28 41.5 27.8 52 Ø 42.5 73 Ø 42.5 73 Ø 42.5 73 186.9 155.6 153.9 149.5 154 169.5 174
AR
AL
AW
18
Air Combination
AC20C-D to AC40C-D 1 2
How to Order
· Option/Semi-standard: Select one each for a to h.
AC 30 C 03 DE D · Option/Semi-standard symbol:
When more than one specification is required, indicate in
q w e r t alphanumeric order.
Example) AC30C-F03DE1-16NR-D
q
Symbol Description Body size
20 30 40
— Rc
w
Pipe thread type N∗1 NPT
F∗2 G
+
01 1/8 — —
02 1/4
e
Port size
03 3/8 —
04 1/2 — —
+
— Without auto drain
Float type
a
auto drain
C∗4 N.C. (Normally closed) Drain port is closed when pressure is not applied.
D∗5 N.O. (Normally open) Drain port is open when pressure is not applied. —
+
— Without pressure gauge
Option∗3
19
Air Combination AC20C-D to AC40C-D Series
AC
AC30C-D
C C
AF + AR + AL
q
Symbol Description Body size
20 30 40
— Flow direction: Left to right
Semi-standard
g Flow direction
R Flow direction: Right to left
+
t
AW + AL
— Unit on product label: MPa, °C, Pressure gauge in SI units: MPa
h Unit Z∗14 Unit on product label: psi, °F, Pressure gauge: MPa/psi dual scale ∗16 ∗16 ∗16
ZA∗15 Digital pressure switch: With unit selection function ∗17 ∗17 ∗17
∗1 Drain guide is NPT1/8 (applicable to the AC20C-D) type is recommended. ∗13 The combination of metal bowl 2 and 8 is not
and NPT1/4 (applicable to the AC30C-D to ∗6 When the pressure gauge is attached, a 1.0 MPa available.
AC40C-D). The auto drain port comes with a Ø 3/8" pressure gauge will be fitted for standard (0.85 MPa) ∗14 For pipe thread type: NPT
One-touch fitting (applicable to the AC30C-D to type. 0.4 MPa pressure gauge for 0.2 MPa type. This product is for overseas use only according to
AC40C-D). ∗7 Pressure can be set higher than the specification the new Measurement Act. (The SI unit type is
AF + AR
∗2 Drain guide is G1/8 (applicable to the AC20C-D) and pressure in some cases, but use pressure within the provided for use in Japan.)
G1/4 (applicable to the AC30C-D to AC40C-D). specification range. Cannot be used with M: Round type pressure gauge
∗3 Options G and M are not assembled and supplied ∗8 Refer to chemical data on pages 38 and 43 for (with colour zone). Available by request for special.
loose at the time of shipment. chemical resistance of the bowl. The digital pressure switch will be equipped with the
∗4 When pressure is not applied, condensate which ∗9 A bowl guard is provided as standard equipment unit selection function, setting to psi initially.
does not start the auto drain mechanism will be left in (polycarbonate). ∗15 For options: E1, E2, E3, E4
the bowl. Releasing the residual condensate before ∗10 A bowl guard is provided as standard equipment This product is for overseas use only according to the
ending operations for the day is recommended. (nylon). new Measurement Act. (The SI unit is provided for
AF + AFM + AR
∗5 If the compressor is small (0.75 kW, discharge flow is ∗11 The combination of float type auto drain C and D is use in Japan.)
less than 100 l/min (ANR)), air leakage from the drain not available. ∗16 : For pipe thread type: NPT only
cock may occur during the start of operations. N.C. ∗12 Without a valve function ∗17 : Select with options: E1, E2, E3, E4.
Standard Specifications
Model AC20C-D AC30C-D AC40C-D
Air Filter [AF] AF20-D AF30-D AF40-D
AW + AFM
Component Mist Separator [AFM] AFM20-D AFM30-D AFM40-D
Regulator [AR] AR20-D AR30-D AR40-D
Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2
Pressure gauge port size∗1 [AR] 1/8
Fluid Air
Ambient and fluid temperatures∗2 −5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
AF
Max. operating pressure 1.0 MPa
Auto drain minimum N.C. [AF/AFM] 0.1 MPa 0.15 MPa
operating pressure N.O. [AF/AFM] — 0.1 MPa
Set pressure range [AR] 0.05 to 0.85 MPa AFM / AFD
Max. flow capacity∗3 [AFM] 200 l/min (ANR) 450 l/min (ANR) 1100 l/min (ANR)
[AF] 5 μm
Nominal filtration rating∗4
[AFM] 0.3 μm (99.9 % filtered particle size)
Outlet side oil mist concentration∗5, ∗6 [AFM] Max. 1.0 mg/m3 (≈ 0.8 ppm)
Compressed air purity class∗7 ISO 8573-1:2010 [ 3 : 4 : 3 ]∗8
AR
∗1 Pressure gauge connection threads are not available for F.R.L. unit with a square embedded type pressure gauge or with a digital pressure switch.
∗2 –5 to 50 °C for the products with the digital pressure switch
∗3 Mist separator inlet pressure: 0.7 MPa. Flow at 20 °C, atmospheric pressure, and 65 % of relative humidity
The maximum flow capacity varies depending on the inlet pressure.
Keep the air flow within the maximum flow capacity to prevent an outflow of lubricant to the outlet side.
∗4 Conditions in accordance with [Test condition: ISO 8573-4:2001, Test method ISO 12500-3:2009 compliant] in addition to the conditions above.
AW
Conditions: New element. Flow capacity, inlet pressure, and the amount of solid bodies at the filter inlet are stable.
∗5 The outlet oil mist condensation in accordance with the condition [Test condition: ISO 8573-2:2007, Test method ISO 12500-1:2007 compliant] in addition to the conditions above.
Conditions: New element. Filter inlet oil mist condensation is 10 mg/m3. Flow capacity, inlet pressure, and the amount of filter inlet oil mist condensation are stable.
∗6 Bowl seal and other O-rings are slightly lubricated.
∗7 The compressed air purity class is indicated based on ISO 8573-1:2010 Compressed air – Part 1: Contaminants and purity classes.
For details on this standard, refer to page 37.
∗8 The compressed air quality class on the inlet side is [ 7 : 4 : 4 ].
20
AC20C-D to AC40C-D Series
Dimensions
AC20C-D
A
F N
J M S P2
(Pressure gauge port size)
R
V1
Q 1 Q1
C
K
IN OUT
Q2
2 x P1
V2
Port size
B
U
Clearance for
maintenance
Drain Drain
G
AC30C-D
A
F N
J M S P2
(Pressure gauge port size)
R
V1
Q1
C
K
IN OUT
Q1
V2
2 x P1
B
Port size
U
E
Clearance for
maintenance
Drain Drain
G
AC40C-D
A
F N
J M S P2
(Pressure gauge port size)
R
V1
C
Q1
IN OUT
Q1
Q2
V2
2 x P1
Port size
B
E
Clearance for
maintenance
Drain Drain
G
21
Air Combination AC20C-D to AC40C-D Series
AC
Optional specifications
Applicable
model Square embedded type Round type pressure Round type pressure
Digital pressure switch
pressure gauge gauge gauge (with colour zone)
AF + AR + AL
J J J
AC20C-D
H
H
to Centre of
H
Centre of piping
AC40C-D Centre of piping
piping
AW + AL
Optional specifications Semi-standard
Applicable PC/PA bowl Metal bowl Metal bowl with level gauge
model With auto drain Drain cock with barb
With drain guide With drain cock With drain guide With drain cock With drain guide
fitting
B
B
AF + AR
B
AC20C-D
M5 x 0.8 1/8 1/8
Width across flats 14 Width across flats 14
AF + AFM + AR
N.O.: Black
N.C.: Grey
B
B
B
B
AC30C-D
B
to
AC40C-D Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting
AW + AFM
Standard specifications
Model Bracket mount
P1 P2 A B C E F G J K M N Q1 Q2 R S U V1 V2
AC20C-D 1/8, 1/4 1/8 126.4 87.6 26.5 — 41.6 40 21 2 30 43.2 24 33 5.5 11.5 3.5 29 38
AC30C-D 1/4, 3/8 1/8 167.4 115.4 30.5 30 55.1 50 26.5 3.5 41 57.2 35 — 7 14 6 42.5 42.5
AC40C-D 1/4, 3/8, 1/2 1/8 220.4 147.1 35.5 38.4 72.6 75 35.5 0 50 75.2 40 55 9 18 7 50 65
AF
Optional specifications Semi-standard specifications
Square Round type Round type Metal bowl with
Round type With PC/PA bowl Metal bowl
embedded Digital pressure pressure pressure level gauge
Model pressure auto
type pressure switch gauge (Semi- gauge (with AFM / AFD
gauge drain With barb With drain With drain With drain With drain With drain
gauge standard: Z) colour zone) fitting guide cock guide cock guide
H J H J H J H J H J B B B B B B B
AC20C-D 28 27 27.8 37.5 Ø 37.5 57.5 Ø 37.5 58.5 Ø 37.5 58.5 104.9 — 91.4 87.4 93.9 — —
AC30C-D 28 32.5 27.8 43 Ø 37.5 63 Ø 37.5 64 Ø 37.5 64 157.1 123.9 122.2 117.8 122.3 137.8 142.3
AC40C-D 28 41.5 27.8 52 Ø 42.5 73 Ø 42.5 73 Ø 42.5 73 186.9 155.6 153.9 149.5 154 169.5 174
AR
AL
AW
22
Air Combination
AC20D-D to AC40D-D 1 2
How to Order
· Option/Semi-standard: Select one each for a to h.
AC 30 D 03 DE D · Option/Semi-standard symbol:
When more than one specification is required, indicate in
q w e r t alphanumeric order.
Example) AC30D-F03DE1-16NR-D
q
Symbol Description Body size
20 30 40
— Rc
w
Pipe thread type N∗1 NPT
F∗2 G
+
01 1/8 — —
02 1/4
e
Port size
03 3/8 —
04 1/2 — —
+
— Without auto drain
Float type
a
auto drain
C∗4 N.C. (Normally closed) Drain port is closed when pressure is not applied.
D∗5 N.O. (Normally open) Drain port is open when pressure is not applied. —
+
— Without pressure gauge
Option∗3
23
Air Combination AC20D-D to AC40D-D Series
AC
AC30D-D
AF + AR + AL
q
Symbol Description Body size
20 30 40
Unit on product label: MPa, °C, Pressure gauge in SI units: MPa
Semi-standard
—
t
h Unit Z∗14 Unit on product label: psi, °F, Pressure gauge: MPa/psi dual scale ∗16 ∗16 ∗16
ZA∗15 Digital pressure switch: With unit selection function ∗17 ∗17 ∗17
AW + AL
∗1 Drain guide is NPT1/8 (applicable to the AC20D-D) ∗6 When the pressure gauge is attached, a 1.0 MPa ∗14 For pipe thread type: NPT
and NPT1/4 (applicable to the AC30D-D to pressure gauge will be fitted for standard (0.85 MPa) This product is for overseas use only according to
AC40D-D). The auto drain port comes with a Ø 3/8" type. 0.4 MPa pressure gauge for 0.2 MPa type. the new Measurement Act. (The SI unit type is
One-touch fitting (applicable to the AC30D-D to ∗7 Pressure can be set higher than the specification provided for use in Japan.)
AC40D-D). pressure in some cases, but use pressure within the Cannot be used with M: Round type pressure gauge
∗2 Drain guide is G1/8 (applicable to the AC20D-D) and specification range. (with colour zone). Available by request for special.
G1/4 (applicable to the AC30D-D to AC40D-D). ∗8 Refer to chemical data on pages 43 and 68 for The digital pressure switch will be equipped with the
∗3 Options G and M are not assembled and supplied chemical resistance of the bowl. unit selection function, setting to psi initially.
loose at the time of shipment. ∗9 A bowl guard is provided as standard equipment ∗15 For options: E1, E2, E3, E4
AF + AR
∗4 When pressure is not applied, condensate which (polycarbonate). This product is for overseas use only according to the
does not start the auto drain mechanism will be left in ∗10 A bowl guard is provided as standard equipment new Measurement Act. (The SI unit is provided for
the bowl. Releasing the residual condensate before (nylon). use in Japan.)
ending operations for the day is recommended. ∗11 The combination of float type auto drain C and D is ∗16 : For pipe thread type: NPT only
∗5 If the compressor is small (0.75 kW, discharge flow is not available. ∗17 : Select with options: E1, E2, E3, E4.
less than 100 l/min (ANR)), air leakage from the drain ∗12 Without a valve function
cock may occur during the start of operations. N.C. ∗13 The combination of metal bowl 2 and 8 is not
type is recommended. available.
AF + AFM + AR
Standard Specifications
Model AC20D-D AC30D-D AC40D-D
Filter Regulator [AW] AW20-D AW30-D AW40-D
Component
Mist Separator [AFM] AFM20-D AFM30-D AFM40-D
Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2
Pressure gauge port size∗1
AW + AFM
[AW] 1/8
Fluid Air
Ambient and fluid temperatures∗2 −5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
Auto drain minimum N.C. [AW/AFM] 0.1 MPa 0.15 MPa
operating pressure N.O. [AW/AFM] — 0.1 MPa
Set pressure range [AW] 0.05 to 0.85 MPa
AF
Max. flow capacity∗3 [AFM] 200 l/min (ANR) 450 l/min (ANR) 1100 l/min (ANR)
[AW] 5 μm
Nominal filtration rating∗4
[AFM] 0.3 μm (99.9 % filtered particle size) AFM / AFD
Outlet side oil mist concentration∗5, ∗6 [AFM] Max. 1.0 mg/m3 (≈ 0.8 ppm)
Compressed air purity class∗7 ISO 8573-1:2010 [ 3 : 4 : 3 ]∗8
Drain capacity [AW/AFM] 8 cm3 25 cm3 45 cm3
Bowl material [AW/AFM] Polycarbonate
Bowl guard [AW/AFM] Semi-standard (Steel) Standard (Polycarbonate)
Construction [AW] Relieving type
AR
Keep the air flow within the maximum flow capacity to prevent an outflow of lubricant to the outlet side.
∗4 Conditions in accordance with [Test condition: ISO 8573-4:2001, Test method ISO 12500-3:2009 compliant] in addition to the conditions above.
Conditions: New element. Flow capacity, inlet pressure, and the amount of solid bodies at the filter inlet are stable.
∗5 The outlet oil mist condensation in accordance with the condition [Test condition: ISO 8573-2:2007, Test method ISO 12500-1:2007 compliant] in addition to the conditions
above.
Conditions: New element. Filter inlet oil mist condensation is 10 mg/m3. Flow capacity, inlet pressure, and the amount of filter inlet oil mist condensation are stable.
∗6 Bowl seal and other O-rings are slightly lubricated.
AW
∗7 The compressed air purity class is indicated based on ISO 8573-1:2010 Compressed air – Part 1: Contaminants and purity classes.
For details on this standard, refer to page 37.
∗8 The compressed air quality class on the inlet side is [ 7 : 4 : 4 ].
24
AC20D-D to AC40D-D Series
Dimensions
AC20D-D A
F
J M P2 S
(Pressure gauge port size)
R
C
V1
K
Q1 Q1
IN OUT
Q2
V2
2 x P1
Port size
B
U
Clearance for
maintenance
Drain Drain
G
AC30D-D A
F
J M P2 S
(Pressure gauge port size)
R
C
V1
Q1
K
IN OUT
Q1
V2
2 x P1
Port size
U
B
E
Clearance for
maintenance
Drain Drain
G
AC40D-D A
F
J M P2 S
(Pressure gauge port size)
R
C
V1
Q1
IN OUT
Q1
Q2
V2
2 x P1
Port size
B
E
Clearance for
maintenance
Drain Drain
G
25
Air Combination AC20D-D to AC40D-D Series
AC
Optional specifications
Applicable
model Square embedded type Round type pressure Round type pressure
Digital pressure switch
pressure gauge gauge gauge (with colour zone)
AF + AR + AL
J J J
AC20D-D
H
H
to Centre of
H
Centre of piping
AC40D-D Centre of piping
piping
AW + AL
Optional specifications Semi-standard
Applicable PC/PA bowl Metal bowl Metal bowl with level gauge
model With auto drain Drain cock with barb
With drain guide With drain cock With drain guide With drain cock With drain guide
fitting
B
B
AF + AR
B
AC20D-D
M5 x 0.8 1/8 1/8
Width across flats 14 Width across flats 14
AF + AFM + AR
N.O.: Black
N.C.: Grey
B
B
B
B
AC30D-D
B
to
AC40D-D Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting
AW + AFM
Standard specifications
Model Bracket mount
P1 P2 A B C E F G J K M Q1 Q2 R S U V1 V2
AC20D-D 1/8, 1/4 1/8 83.2 87.6 71.8 — 41.6 40 21 5 30 24 33 5.5 11.5 3.5 29 38
AC30D-D 1/4, 3/8 1/8 110.2 115.3 86.5 30 55.1 55 26.5 3.5 41 35 — 7 14 6 42.5 42.5
AC40D-D 1/4, 3/8, 1/2 1/8 145.2 147.1 91.5 38.4 72.6 80 35.5 0 50 40 55 9 18 7 50 65
AF
Optional specifications Semi-standard specifications
Square Round type Round type Metal bowl with
Round type With PC/PA bowl Metal bowl
embedded Digital pressure pressure pressure level gauge
Model pressure auto
type pressure switch gauge (Semi- gauge (with AFM / AFD
gauge drain With barb With drain With drain With drain With drain With drain
gauge standard: Z) colour zone) fitting guide cock guide cock guide
H J H J H J H J H J B B B B B B B
AC20D-D 28 27 27.8 37.5 Ø 37.5 57.5 Ø 37.5 58.5 Ø 37.5 58.5 104.9 — 91.4 87.4 93.9 — —
AC30D-D 28 32.5 27.8 43 Ø 37.5 63 Ø 37.5 64 Ø 37.5 64 157.1 123.9 122.2 117.8 122.3 137.8 142.3
AC40D-D 28 41.5 27.8 52 Ø 42.5 73 Ø 42.5 73 Ø 42.5 73 186.9 155.6 153.9 149.5 154 169.5 174
AR
AL
AW
26
AC-D Series
Options/Accessories
Part no.
For AC20-D For AC30-D For AC40-D
Model For AC20A-D For AC30A-D For AC40A-D
Section
For AC20B-D For AC30B-D For AC40B-D
Description For AC20C-D For AC30C-D For AC40C-D
For AC20D-D For AC30D-D For AC40D-D
Standard G36-10-01 G46-10-01
Round type
0.02 to 0.2 MPa setting G36-4-01 G46-4-01
∗1 Standard G36-10-01-L G46-10-01-L
Round type
Pressure
(with colour zone) 0.02 to 0.2 MPa setting G36-4-01-L G46-4-01-L
gauge
Square Standard GC3-10AS-D [136150A (Pressure gauge cover only)]
embedded type∗2 0.02 to 0.2 MPa setting GC3-4AS-D [136150A (Pressure gauge cover only)]
Option
NPN output, Wiring bottom entry ISE35-N-25-MLA-X523 [ISE35-N-25-M (Switch body only)]∗3
Digital pressure NPN output, Wiring top entry ISE35-R-25-MLA-X523 [ISE35-R-25-M (Switch body only)]∗3
switch PNP output, Wiring bottom entry ISE35-N-65-MLA-X523 [ISE35-N-65-M (Switch body only)]∗3
PNP output, Wiring top entry ISE35-R-65-MLA-X523 [ISE35-R-65-M (Switch body only)]∗3
Float type N.C. AD27-D AD37-D AD47-D
auto drain∗4 N.O. — AD38-D AD48-D
Spacer Y200-D Y300-D Y400-D
Accessory
Spacer with bracket Y200T-D Y300T-D Y400T-D
∗1 in part numbers for a round type pressure gauge indicates a pipe thread type. No indication is necessary for R; however, indicate N for NPT. Please contact SMC
regarding the connection thread NPT and pressure gauge supply for psi unit specifications.
∗2 Including one O-ring and 2 mounting screws
∗3 Lead wire with connector (2 m), adapter, lock pin, O-ring (1 pc.), mounting screws (2 pcs.) are attached. [ ]: Switch body only
Regarding how to order the digital pressure switch, refer to the Web Catalogue.
∗4 Minimum operating pressure: N.O. type–0.1 MPa; N.C. type–0.1 MPa (AD27-D) and 0.15 MPa (AD37-D/AD47-D). Please consult with SMC separately for psi and
°F unit display specifications.
27
AC-D Series
Accessories (Spacers/Spacer with Bracket)
Spacer
AC
D E C
AF + AR + AL
Centre of
F.R.L. body
AW + AL
Standard Specifications
Fluid Air
Ambient and fluid temperatures -5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
AF + AR
Replacement Parts A
(Spacer width)
Part no.
Description Material
Y200-D Y300-D Y400-D Model A B C D E Applicable model
Seal HNBR Y220P-050S Y320P-050S Y420P-050S Y200-D 3.2 35 13.2 42 0.6 AC20-D
Y300-D 4.2 43 16.2 53 — AC30-D
AF + AFM + AR
Y400-D 5.2 51 19.2 71 — AC40-D
AW + AFM
G
Centre of
C
E
F.R.L. body
B
E
AF
EE
AFM / AFD
Standard Specifications
AR
Fluid Air
Ambient and fluid temperatures -5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
AL
A
Replacement Parts
(Spacer width)
Part no.
Description Material
Y200T-D Y300T-D Y400T-D Applicable
Model A B C D E EE F G H J K model
Seal HNBR Y220P-050S Y320P-050S Y420P-050S
AW
28
29
Modular Type
Air Filters
AF/AFM/AFD Series
AC
AF + AR + AL
Air Filter Filtration
Model Port size Options
AF Series μm
AW + AL
Bracket
AF30-D 1/4, 3/8 5
Float type auto drain
AF + AR
AF40-D 1/4, 3/8, 1/2
p. 31 to 38
Mist Separator
AFM Series AFM20-D 1/8, 1/4
AF + AFM + AR
Bracket
AFM30-D 1/4, 3/8 0.3
Float type auto drain
AW + AFM
AFM40-D 1/4, 3/8, 1/2
p. 39 to 43
Micro Mist Separator
AFD Series AFD20-D 1/8, 1/4
Bracket
AF
AFD30-D 1/4, 3/8 0.01
Float type auto drain
AFM / AFD
30
Air Filter
Symbol
AF20-D to AF40-D
Air Filter Air Filter with Auto Drain
1 2 1 2
q w e r t alphanumeric order.
Example) AF30-03BD-R-D
q
Symbol Description Body size
20 30 40
— Rc
w
Pipe thread type N NPT
F G
+
01 1/8 — —
02 1/4
e
Port size
03 3/8 —
04 1/2 — —
+
— Without mounting option
a Mounting
B∗1 With bracket
Option
+
r
— Without auto drain
Float type auto
b
drain∗2
C∗3 N.C. (Normally closed) Drain port is closed when pressure is not applied.
D∗4 N.O. (Normally open) Drain port is open when pressure is not applied. —
+
— Polycarbonate bowl
2 Metal bowl
6 Nylon bowl
c Bowl∗5
8 Metal bowl with level gauge —
C With bowl guard —∗6 —∗6
6C With bowl guard (Nylon bowl) —∗7 —∗7
+
Semi-standard
AC
Ambient and fluid temperatures −5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
Auto drain minimum N.C. 0.1 MPa 0.15 MPa
AF + AR + AL
operating pressure N.O. — 0.1 MPa
Nominal filtration rating∗1 5 μm
Compressed air purity class∗2 ISO 8573-1:2010 [ 6 : 8 : 4 ]∗3
Drain capacity 8 cm3 25 cm3 45 cm3
Bowl material Polycarbonate
Bowl guard Semi-standard (Steel) Standard (Polycarbonate)
Weight 0.09 kg 0.17 kg 0.35 kg
∗1 [Compliant to test condition ISO 8573-4:2001 and test method ISO 12500-3:2009]
Conditions: New element. Flow capacity, inlet pressure, and the amount of solid bodies at the filter inlet are stable.
AW + AL
∗2 The compressed air purity class is indicated based on ISO 8573-1:2010 Compressed air – Part 1: Contaminants and purity classes.
For details on this standard, refer to page 37.
∗3 The compressed air quality class on the inlet side is [ 7 : 9 : 4 ].
AF + AR
With drain cock
With bowl guard C2SF-C-D C3SF-D C4SF-D
Manual Drain cock with barb fitting With bowl guard — C3SF-W-D C4SF-W-D
With drain guide — C2SF-J-D — —
Polycarbonate
(without valve function) With bowl guard C2SF-CJ-D C3SF-J-D C4SF-J-D
— AD27-D — —
Automatic∗1 Normally closed (N.C.)
With bowl guard AD27-C-D AD37-D AD47-D
AF + AFM + AR
(Auto drain)
Normally open (N.O.) With bowl guard — AD38-D AD48-D
— C2SF-6-A — —
With drain cock
With bowl guard C2SF-6C-A C3SF-6-A C4SF-6-A
Manual Drain cock with barb fitting With bowl guard — C3SF-6W-A C4SF-6W-A
With drain guide — C2SF-6J-A — —
Nylon
(without valve function) With bowl guard C2SF-6CJ-A C3SF-6J-A C4SF-6J-A
— AD27-6-A — —
Automatic∗1 Normally closed (N.C.)
With bowl guard AD27-6C-A AD37-6-A AD47-6-A
(Auto drain)
AW + AFM
Normally open (N.O.) With bowl guard — AD38-6-A AD48-6-A
— C2SF-2-A C3SF-2-A C4SF-2-A
With drain cock
With level gauge — C3LF-8-A C4LF-8-A
Manual
With drain guide — C2SF-2J-A C3SF-2J-A C4SF-2J-A
(without valve function) With level gauge — C3LF-8J-A C4LF-8J-A
Metal
— AD27-2-A AD37-2-A AD47-2-A
Normally closed (N.C.)
Automatic∗1 With level gauge — AD37-8-A AD47-8-A
(Auto drain) — — AD38-2-A AD48-2-A
Normally open (N.O.)
With level gauge — AD38-8-A AD48-8-A
AF
∗1 Bowl assembly comes with a bowl seal.
in bowl assembly part numbers indicates a pipe thread type (applicable tubing for auto drain).
No indication is necessary for Rc thread; however, indicate N for NPT thread, and F for G thread. (For auto drain, —: Ø 10, N: Ø 3/8")
Please consult with SMC separately for psi and °F unit display specifications. AFM / AFD
∗1 Assembly of a bracket A/B and 2 mounting screws Bowl seal C2SFP-260S C32FP-260S C42FP-260S
Bowl assembly∗1, ∗2 Refer to “Bowl Assembly/Part No.”
Bracket B ∗1 Bowl assembly comes with a bowl seal.
∗2 Please consult with SMC separately for psi and °F unit display specifications.
Air filter
AL
AW
Bracket A
Mounting screw
Bracket assembly
32
AF20-D to AF40-D Series
0.1 0.1
Pa
a
Pa
a
Pa
a
Pa
MP
MP
MP
.3 M
M
M
M
0
7
.5
0.1
1.
5
0.08 0.08
.3
0.
0.
=0
Pa
=0
=
Pressure drop [MPa]
=
=
P1
P1 =
P1
P1
P1
P1
7
P1
0. a
0.06
1
= MP 0.06
P .0
=1
Pa
P1
.1 M
0.04 0.04
=0
P1
0.02 0.02
0 0
0 500 1000 1500 0 1000 2000 3000 4000
Flow rate [l/min (ANR)] Flow rate [l/min (ANR)]
AF40-D Rc1/2
0.1
a
Pa
MP
MP
.3 M
Pa
.7
0.08
.5
M
=0
=0
=0
Pressure drop [MPa]
0
1.
P1
=
P1
Pa
P1
0.06 P1
.1 M
=0
0.04
P1
0.02
0
0 2000 4000 6000
Flow rate [l/min (ANR)]
33
Air Filter AF20-D to AF40-D Series
N.O. type: AD38-D, AD48-D N.C. type: AD37-D, AD47-D Compact auto drain N.C. type:
AC
AD27-D
AF + AR + AL
q Bowl q Bowl
r Valve r Valve
e Lever e Lever
AW + AL
w Float w Float q Bowl
t Valve seat t Valve seat w Float
i Chamber i Chamber e Lever
y Spring u Piston r Valve
u Piston y Spring
t Valve seat
AF + AR
o Housing o Housing
!0 Seal y Knob
!0 Seal
!1 Drain cock !1 Drain cock
AF + AFM + AR
Drain
Drain Drain
• When pressure inside the bowl is • When pressure inside the bowl is • When pressure inside the bowl is
released: released: released:
When pressure is released from the bowl q, Even when pressure inside the bowl q is re- Even when pressure inside the bowl q is re-
AW + AFM
the piston u is lowered by the spring y. leased, spring y keeps the piston u in its up- leased, the weight of the float w causes the
The sealing action of the seal !0 is interrupted, ward position. valve r, which is connected to the lever e, to
and the outside air flows inside the bowl q This keeps the seal created by the seal !0 in seal the valve seat t. As a result, the inside of
through the housing hole o and the drain cock place; thus, the inside of the bowl q is shut off the bowl q is shut off from the outside air.
!1. from the outside air. Therefore, even if there is an accumulation of
Therefore, if there is an accumulation of con- Therefore, even if there is an accumulation of condensate in the bowl q, it will not drain out.
densate in the bowl q, it will drain out through condensate in the bowl q, it will not drain out. • When pressure is applied inside the
the drain cock. bowl:
• When pressure is applied inside the
• When pressure is applied inside the bowl: Even when pressure is applied inside the bowl
AF
bowl: Even when pressure is applied inside the bowl q, the weight of the float w and the differential
When pressure is 0.1 MPa or more, the force of q, the combined force of the spring y and the pressure that is applied to the valve r cause
the piston u surpasses the force of the spring pressure inside the bowl q keeps the piston u the valve r to seal the valve seat t, and the
y, and the piston goes up. in its upward position. outside air is shut off from the inside of the bowl AFM / AFD
This pushes seal !0 up so that it creates a seal, This maintains the seal created by the seal !0 q.
and the inside of the bowl q, is shut off from in place; thus, the inside of the bowl q is shut • When there is an accumulation of
the outside air. off from the outside air. condensate in the bowl:
If there is no accumulation of condensate in the If there is no accumulation of condensate in the The float w rises due to its own buoyancy and
bowl q at this time, the float w will be pulled bowl q at this time, the float w will be pulled the seal at the valve seat t is interrupted.
down by its own weight, causing the valve r, down by its own weight, causing the valve r, The condensate inside the bowl q drains out
which is connected to the lever e, to seal the which is connected to the lever e, to seal the through the knob y.
AR
This allows the pressure inside the bowl q to allows the pressure inside the bowl q to enter
enter the chamber i. The result is that the the chamber i.
combined pressure inside the chamber i and The result is that the pressure inside the cham-
the force of the spring y lowers the piston u. ber i surpasses the force of the spring y and
This causes the sealing action of the seal !0 to pushes the piston u downward.
be interrupted, and the accumulated conden- This causes the sealing action of the seal !0 to be
AW
sate in the bowl q drains out through the drain interrupted and the accumulated condensate in
cock !1. the bowl q drains out through the drain cock !1.
Turning the drain cock !1 manually counter- Turning the drain cock !1 manually counter-
clockwise lowers the piston u, and causes the clockwise lowers the piston u, and causes the
seal created by the seal !0 to be interrupted, seal created by the seal !00 to be interrupted,
thus allowing the condensate to drain out. thus allowing the condensate to drain out.
34
AF20-D to AF40-D Series
Piston
Orifice
Orifice
For both N.O. and N.C., the condensate can be discharged manually by turning the drain cock to the “O” position.
Drain cock
Open Closed
Condensate not
0.75 kW or more accumulated
Do not want to accumulate Want to prevent troubles N.O.∗1
condensate generated caused by freezing. Normally open
at the inlet side
when pressure is not applied.
∗1 For N.O. (Normally open) type, the condensate discharge passage is open when pressure is not applied. For this
reason, the drain port is not closed completely in a compressor with a small supply amount (less than 0.75 kW) and
the air will ceaselessly blow out.
35
Air Filter AF20-D to AF40-D Series
Dimensions
AF20-D AF30-D to AF40-D
AC
Bracket
(Option)
J M T J M T
U Bracket N D U N
AF + AR + AL
D (Option) S S
R
R
V
V
Q
Q
C
C
IN OUT IN OUT
2xP
AW + AL
Port size B 2xP
Port size
B
Clearance for
maintenance
AF + AR
Drain
G
Clearance for
maintenance
Drain
G
E A
AF + AFM + AR
Optional specifications Semi-standard
Applicable PC/PA bowl Metal bowl Metal bowl with level gauge
model With auto drain Drain cock with With With With With With
barb fitting drain guide drain cock drain guide drain cock drain guide
B
B
B
B
AW + AFM
AF20-D
M5 x 0.8 1/8 1/8
Width across flats 14 Width across flats 14
N.O.: Black
N.C.: Grey
B
B
B
B
B
AF30-D
AF
to
AF40-D Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting AFM / AFD
Optional specifications
P A B C D E G J M N Q R S T U V B
AF20-D 1/8, 1/4 40 87.6 17.5 21 — 25 21 30 27 22 5.4 8.4 60 2.3 28 104.9
AF30-D 1/4, 3/8 53 115.4 21.5 26.5 30 35 26.5 41 35 25 6.5 13 71 2.3 32 157.1
AF40-D 1/4, 3/8, 1/2 70 147.1 25.5 35.5 38.4 40 35.5 50 52 30 8.5 12.5 88 2.3 39 186.9
AL
Semi-standard specifications
Metal bowl with
PC/PA bowl Metal bowl
level gauge
Model
With barb With drain With drain With drain With drain With drain
AW
ISO 8573-1:2010 [ 4 : 6 : 2 ]
Oil class
2 Concentration of total oil ≤ 0.1 mg/m3
6 4 4
The class indicates the compressed air purity according to ISO 8573-1:2010 (JIS B 8392-1:2012) and indicates the maximum purity class which can be
obtained using that system. Note, however, that this value will differ according to the inlet air conditions.
37
Air Filter AF20-D to AF40-D Series
AC
Be sure to read this before handling the products. Refer to the back cover for safety instructions. For F.R.L. units
precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual”, https://www.smc.eu
AF + AR + AL
Design/Selection Maintenance
Warning Warning
1. Replace the element every 2 years or when the pressure drop
1 . The bowl material of the standard air filter is poly-
becomes 0.1 MPa, whichever comes first, to prevent damage
carbonate. Do not use in an environment where they
to the element.
AW + AL
are exposed to or come in contact with organic sol-
vents, chemicals, cutting oil, synthetic oil, alkali,
and thread lock solutions. Mounting/Adjustment
AF + AR
Type Chemical name Application examples Polycar-
Nylon
bonate front (or the back) of the body to avoid drop or damage of the
Hydrochloric acid bowl.
Sulfuric acid Acid washing
Acid ҂
Phosphoric acid liquid for metals
Chromic acid Groove of the body
AF + AFM + AR
Sodium hydroxide (Caustic soda)
Degreasing of metals
Potash
Industrial salts
Alkaline Calcium hydroxide (Slack lime) ҂
Water-soluble
Ammonia water
cutting oil Lock button
Carbonate of soda
Sodium sulfide
Inorganic
Potassium nitrate — ҂
salts
Sulfate of soda
Carbon tetrachloride
AW + AFM
Cleansing liquid for metals
Chlorine Chloroform
Printing ink ҂
solvents Ethylene chloride
Dilution
Methylene chloride
Benzene
Aromatic Coatings
Toluene ҂
series Dry cleaning
Paint thinner
Acetone Photographic film
Ketone Methyl ethyl ketone Dry cleaning ҂ ҂
AF
Cyclohexane Textile industries
Ethyl alcohol
Antifreeze
Alcohol IPA ҂
Adhesives
Methyl alcohol AFM / AFD
Gasoline
Oil — ҂
Kerosene
Methyl ether
Ether Brake oil additives ҂
Ethyl ether
Cutting oil
Amino Methyl amino Brake oil additives ҂ ҂
Rubber accelerator
Thread-lock fluid
AL
Others Seawater — ҂
Leak tester
: Essentially safe : Some effects may occur. ҂: Effects will occur.
When the above factors are present, or there is some doubt, use a metal bowl
for safety.
AW
38
Mist Separator
AFM20-D to AFM40-D
Micro Mist Separator
AFD20-D to AFD40-D
Symbol
Mist Separator Micro Mist Separator
1 2 1 2
q w e r t
q
Symbol Description Body size
20 30 40
— Rc
w
Pipe thread type N NPT
F G
+
01 1/8 — —
02 1/4
e
Port size
03 3/8 —
04 1/2 — —
+
— Without mounting option
a Mounting
B∗1 With bracket
Option
+
r
— Without auto drain
Float type auto
b
drain∗2
C∗3 N.C. (Normally closed) Drain port is closed when pressure is not applied.
D∗4 N.O. (Normally open) Drain port is open when pressure is not applied. —
+
— Polycarbonate bowl
2 Metal bowl
6 Nylon bowl
c Bowl∗5
8 Metal bowl with level gauge —
C With bowl guard —∗6 —∗6
6C With bowl guard (Nylon bowl) —∗7 —∗7
+
Semi-standard
Standard Specifications
Model AFM20-D/AFD20-D AFM30-D/AFD30-D AFM40-D/AFD40-D
Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/4
Fluid Air
Ambient and fluid temperatures −5 to 60 °C (with no freezing)
AC
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
Min. operating pressure 0.05 MPa
Auto drain minimum N.C. 0.1 MPa 0.15 MPa
AF + AR + AL
operating pressure N.O. — 0.1 MPa
[AFM] 200 l/min (ANR) 450 l/min (ANR) 1100 l/min (ANR)
Max. flow capacity∗1
[AFD] 120 l/min (ANR) 240 l/min (ANR) 600 l/min (ANR)
[AFM] 0.3 μm (99.9 % filtered particle size)
Nominal filtration rating∗2
[AFD] 0.01 μm (99.9 % filtered particle size)
[AFM] Max. 1.0 mg/m3 (≈ 0.8 ppm)
Outlet side oil mist concentration∗3, ∗4
[AFD] Max. 0.1 mg/m3 (Before saturated with oil 0.01 mg/m3 or less ≈ 0.008 ppm)
[AFM] ISO 8573-1:2010 [ 3 : 7 : 3 ]∗6
Compressed air purity class∗5
[AFD] ISO 8573-1:2010 [ 1 : 7 : 2 ]∗7
AW + AL
Drain capacity 8 cm3 25 cm3 45 cm3
Bowl material Polycarbonate
Bowl guard Semi-standard (Steel) Standard (Polycarbonate)
Weight 0.10 kg 0.18 kg 0.37 kg
∗1 Inlet pressure: 0.7 MPa. Flow at 20 °C, atmospheric pressure, and 65 % of relative humidity 2:2007, Test method ISO 12500-1:2007 compliant] in addition to the conditions above.
The maximum flow capacity varies depending on the inlet pressure. Conditions: New element. Filter inlet oil mist condensation is 10 mg/m3. Flow capacity, inlet
Keep the air flow within the maximum flow capacity to prevent an outflow of lubricant to the pressure, and the amount of filter inlet oil mist condensation are stable.
outlet side. ∗4 Bowl seal and other O-rings are slightly lubricated.
∗2 Conditions in accordance with [Test condition: ISO 8573-4:2001, Test method ISO ∗5 The compressed air purity class is indicated based on ISO 8573-1:2010
AF + AR
12500-3:2009 compliant] in addition to the conditions above. Compressed air – Part 1: Contaminants and purity classes.
Conditions: New element. Flow capacity, inlet pressure, and the amount of solid For details on this standard, refer to page 37.
bodies at the filter inlet are stable. ∗6 The compressed air quality class on the inlet side is [ 6 : 8 : 4 ].
∗3 The outlet oil mist condensation in accordance with the condition [Test condition: ISO 8573- ∗7 The compressed air quality class on the inlet side is [ 3 : 7 : 3 ].
AF + AFM + AR
— C2SF-D — —
With drain cock
With bowl guard C2SF-C-D C3SF-D C4SF-D
Manual Drain cock with barb fitting With bowl guard — C3SF-W-D C4SF-W-D
With drain guide — C2SF-J-D — —
Polycarbonate
(without valve function) With bowl guard C2SF-CJ-D C3SF-J-D C4SF-J-D
— AD27-D — —
Automatic∗1 Normally closed (N.C.)
With bowl guard AD27-C-D AD37-D AD47-D
(Auto drain)
Normally open (N.O.) With bowl guard — AD38-D AD48-D
— C2SF-6-A — —
AW + AFM
With drain cock
With bowl guard C2SF-6C-A C3SF-6-A C4SF-6-A
Manual Drain cock with barb fitting With bowl guard — C3SF-6W-A C4SF-6W-A
With drain guide — C2SF-6J-A — —
Nylon
(without valve function) With bowl guard C2SF-6CJ-A C3SF-6J-A C4SF-6J-A
— AD27-6-A — —
Automatic∗1 Normally closed (N.C.)
With bowl guard AD27-6C-A AD37-6-A AD47-6-A
(Auto drain)
Normally open (N.O.) With bowl guard — AD38-6-A AD48-6-A
— C2SF-2-A C3SF-2-A C4SF-2-A
With drain cock
With level gauge — C3LF-8-A C4LF-8-A
AF
Manual
With drain guide — C2SF-2J-A C3SF-2J-A C4SF-2J-A
(without valve function) With level gauge — C3LF-8J-A C4LF-8J-A
Metal
— AD27-2-A AD37-2-A AD47-2-A
Normally closed (N.C.)
Automatic∗1 With level gauge — AD37-8-A AD47-8-A AFM / AFD
(Auto drain) — — AD38-2-A AD48-2-A
Normally open (N.O.)
With level gauge — AD38-8-A AD48-8-A
∗1 Bowl assembly comes with a bowl seal.
in bowl assembly part numbers indicates a pipe thread type (applicable tubing for auto drain).
No indication is necessary for Rc thread; however, indicate N for NPT thread, and F for G thread. (For auto drain, —: Ø 10, N: Ø 3/8")
Please consult with SMC separately for psi and °F unit display specifications.
∗1 Assembly of a bracket A/B and 2 mounting screws Bowl seal C2SFP-260S C32FP-260S C42FP-260S
Bowl assembly∗1, ∗2 Refer to “Bowl Assembly/Part No.”
Bracket B
Mist separator ∗1 Bowl assembly comes with a bowl seal.
Micro mist separator ∗2 Please consult with SMC separately for psi and °F unit display specifications.
AW
Bracket A
Mounting screw Bracket assembly
40
AFM20-D to AFM40-D Series
AFD20-D to AFD40-D Series
Flow Rate Characteristics (Representative values) Initial state
AFM20-D AFD20-D
0.02 0.02
Pressure drop [MPa]
0 0
0 50 100 150 200 0 50 100
Flow rate [l/min (ANR)] Flow rate [l/min (ANR)]
AFM30-D AFD30-D
0.02 0.02
Pressure drop [MPa]
a Pa
0.01 Pa P a 0.01 MP 0.5 M
M 5M 0.3 1=
MPa
0.
3 . Pa = P
=0 .7 M P1 0.7
= P1 0 P1 =
1
P P 1=
0 0
0 100 200 300 400 500 600 0 50 100 150 200
Flow rate [l/min (ANR)] Flow rate [l/min (ANR)]
AFM40-D AFD40-D
0.02 0.02
Pressure drop [MPa]
a
Pa a MP
M P a .5
0.01 0 .3 .5 M a 0.01 MP =0 Pa
= =0 .7 MP 0.3 P1 0.7 M
P 1 P1 =0 = 1=
P1 P
P1
0 0
0 200 400 600 800 1000 0 100 200 300 400 500 600
Flow rate [l/min (ANR)] Flow rate [l/min (ANR)]
41
AFM20-D to AFM40-D Series
Mist Separator
Dimensions
AFM20-D AFM30-D to AFM40-D
AC
AFD20-D AFD30-D to AFD40-D
Bracket
J M T J M (Option) T
U Bracket N D U N
AF + AR + AL
D (Option) S S
R
R
V
V
Q
Q
C
C
IN OUT IN OUT
AW + AL
2xP
2xP
Port size B
Port size
B
Clearance for
maintenance
AF + AR
Drain
G
Clearance for
maintenance
Drain
G
E A
AF + AFM + AR
Optional specifications Semi-standard
Applicable PC/PA bowl Metal bowl Metal bowl with level gauge
model With auto drain Drain cock with With With With With With
barb fitting drain guide drain cock drain guide drain cock drain guide
B
B
B
B
AFM20-D
AW + AFM
AFD20-D
M5 x 0.8 1/8 1/8
Width across flats 14 Width across flats 14
N.O.: Black
AFM30-D to N.C.: Grey
B
B
B
B
B
AFM40-D
AF
AFD30-D to Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
AFD40-D applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting AFM / AFD
Optional specifications
P A B C D E G J M N Q R S T U V B
AFM20-D/AFD20-D 1/8, 1/4 40 87.6 17.5 21 — 40 21 30 27 22 5.4 8.4 60 2.3 28 104.9
AFM30-D/AFD30-D 1/4, 3/8 53 115.4 21.5 26.5 30 50 26.5 41 35 25 6.5 13 71 2.3 32 157.1
AFM40-D/AFD40-D 1/4, 3/8, 1/2 70 147.1 25.5 35.5 38.4 75 35.5 50 52 30 8.5 12.5 88 2.3 39 186.9
AL
Semi-standard specifications
Metal bowl with
PC/PA bowl Metal bowl
level gauge
Model
With barb With drain With drain With drain With drain With drain
AW
Warning Caution
1. The bowl material of the standard mist separator and 1. Install an air filter (AF series) as a pre-filter on the inlet side of
micro mist separator is polycarbonate. Do not use the mist separator to prevent premature clogging.
in an environment where they are exposed to or 2. Install a mist separator (AFM series) as a pre-filter on the inlet
come in contact with organic solvents, chemicals, side of the micro mist separator to prevent premature clogging.
cutting oil, synthetic oil, alkali, and thread lock so- 3. Do not install on the inlet side of the dryer as this can cause
lutions. premature clogging of the element.
43
Modular Type
Regulator
AR Series
AC
AF + AR + AL
Regulator
Model Port size Set pressure Options
AR Series
Bracket
AR20(K)-D 1/8, 1/4
Set nut
AW + AL
(for panel mount)
AF + AR
AR40(K)-D 1/4, 3/8, 1/2 Round type pressure
p. 45 to 52 gauge
AF + AFM + AR
AW + AFM
AF
AFM / AFD
AR
AL
AW
44
Regulator
Symbol Regulator with Backflow
AR20K-D to AR40K-D
· Models with the backflow function include a mechanism which allows for the air pressure
in the outlet side to be released to the inlet side.
Example 1) 1 1 Example 2) 12
When the pressure in the rear and 2 When the air supply is cut off and
1 2 1 2 1 2
the front of the cylinder differs: 1 releasing the inlet pressure to the
3
4 atmosphere, the residual pressure
14 2 12 10
release of the outlet side can be
31 5
ensured for a safety purpose.
How to Order
q w e r t y Example) AR30K-03BE-1NR-D
q
Symbol Description Body size
20 30 40
— Without backflow function
w
With backflow function
K∗1 With backflow function
+
— Rc
e
Pipe thread type N NPT
F G
+
01 1/8 — —
02 1/4
r
Port size
03 3/8 —
04 1/2 — —
+
— Without mounting option
a Mounting B∗3 With bracket
H With set nut (for panel mount)
+
— Without pressure gauge
Option∗2
45
AR20-D to AR40-D Series
Regulator
AC
AF + AR + AL
AR30-D
AW + AL
q
AF + AR
Symbol Description Body size
20 30 40
— 0.05 to 0.85 MPa setting
c Set pressure∗6
1 0.02 to 0.2 MPa setting
+
AF + AFM + AR
— Relieving type
d Exhaust mechanism
N Non-relieving type
+
Semi-standard
AW + AFM
Y Upward
+
— Unit on product label: MPa, Pressure gauge in SI units: MPa
g Unit Z∗7 Unit on product label: psi, Pressure gauge: MPa/psi dual scale ∗9 ∗9 ∗9
ZA∗8 Digital pressure switch: With unit selection function ∗10 ∗10 ∗10
∗1 Set the inlet pressure to at least 0.05 MPa higher than the set pressure.
∗2 Options B, G, H, and M are not assembled and supplied loose at the time of shipment.
∗3 Assembly of a bracket and set nuts (applicable to the AR20(K)-D to AR40(K)-D).
∗4
AF
When the pressure gauge is attached, a 1.0 MPa pressure gauge will be fitted for standard (0.85 MPa) type. 0.4 MPa pressure gauge for 0.2 MPa type.
∗5 When choosing with H (panel mount), the installation space for lead wires will not be secured. In this case, select “wiring top entry” for the electrical entry. (Select “wiring bottom
entry” when the semi-standard Y is chosen simultaneously.)
∗6 Pressure can be set higher than the specification pressure in some cases, but use pressure within the specification range.
∗7 For pipe thread type: NPT AFM / AFD
This product is for overseas use only according to the new Measurement Act. (The SI unit type is provided for use in Japan.) Cannot be used with M: Round type pressure
gauge (with colour zone). Available by request for special. The digital pressure switch will be equipped with the unit selection function, setting to psi initially.
∗8 For options: E1, E2, E3, E4
∗9 : For pipe thread type: NPT only
∗10 : Select with options: E1, E2, E3, E4.
AR
AL
AW
46
AR20-D to AR40-D Series
AR20K-D to AR40K-D Series
Standard Specifications
Model AR20(K)-D AR30(K)-D AR40(K)-D
Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2
Pressure gauge port size∗1 1/8
Fluid Air
Ambient and fluid temperatures∗2 −5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
Set pressure range 0.05 to 0.85 MPa
Construction Relieving type
Weight 0.14 kg 0.27 kg 0.48 kg
∗1 Pressure gauge connection threads are not available for F.R.L. unit with a square embedded type pressure gauge or with a digital pressure switch.
∗2 –5 to 50 °C for the products with the digital pressure switch
Option/Part No.
Model
Optional specifications
AR20(K)-D AR30(K)-D AR40(K)-D
Bracket assembly∗1 AR23P-270AS AR33P-270AS AR43P-270AS
Set nut AR23P-260S AR33P-260S AR43P-260S
Standard G36-10-01 G46-10-01
Round type
0.02 to 0.2 MPa setting G36-4-01 G46-4-01
Pressure Round type Standard G36-10-01-L G46-10-01-L
gauge∗2 (with colour zone) 0.02 to 0.2 MPa setting G36-4-01-L G46-4-01-L
Square Standard GC3-10AS-D [136150A (Pressure gauge cover only)]
embedded type∗3 0.02 to 0.2 MPa setting GC3-4AS-D [136150A (Pressure gauge cover only)]
NPN output, Wiring bottom entry ISE35-N-25-MLA-X523 [ISE35-N-25-M (Switch body only)]∗4
NPN output, Wiring top entry ISE35-R-25-MLA-X523 [ISE35-R-25-M (Switch body only)]∗4
Digital pressure switch
PNP output, Wiring bottom entry ISE35-N-65-MLA-X523 [ISE35-N-65-M (Switch body only)]∗4
PNP output, Wiring top entry ISE35-R-65-MLA-X523 [ISE35-R-65-M (Switch body only)]∗4
∗1 Assembly of a bracket and set nuts
∗2 in part numbers for a round pressure gauge indicates a pipe thread type. No indication is necessary for R; however, indicate N for NPT. Please contact SMC regarding the
pressure gauge supply for both MPa and psi unit specifications.
∗3 Including one O-ring and 2 mounting screws. [ ]: Pressure gauge cover only
∗4 In addition to the pressure switch body, lead wire with connector (2 m), adapter, lock pin, O-ring (1 pc.), mounting screws (2 pcs.) are attached.
[ ]: Switch body only (Regarding specifications the digital pressure switch, refer to the Web Catalogue.)
Replacement Parts
Part no.
Description
AR20(K)-D AR30(K)-D AR40(K)-D
Valve assembly AR24P-060AS AR34P-060AS AR44P-060AS
Relieving type AR24P-150AS AR34P-150AS AR44P-150AS
Diaphragm assembly
Non-relieving type AR24P-150AS-N AR34P-150AS-N AR44P-150AS-N
Valve guide assembly AR24P-050AS AR34P-050AS AR44P-050AS
Check valve assembly∗1 AR24KP-020AS
∗1 Check valve assembly is applicable for a regulator with backflow function (AR20K-D to AR40K-D) only.
Assembly of a check valve cover, check valve body assembly and 2 mounting screws
47
AR20-D to AR40-D Series Regulator
AC
0.8 0.8
0.7 0.7
Outlet pressure [MPa]
AF + AR + AL
0.6 0.6
0.5 0.5
0.4 0.4
0.3 0.3
0.2 0.2
0.1 0.1
AW + AL
0 0
0 500 1000 1500 2000 0 1000 2000 3000 4000
Flow rate [l/min (ANR)] Flow rate [l/min (ANR)]
AR40(K)-D Rc1/2
0.8
0.7
AF + AR
Outlet pressure [MPa]
0.6
0.5
0.4
0.3
AF + AFM + AR
0.2
0.1
0
0 1000 2000 3000 4000 5000 6000 7000
Flow rate [l/min (ANR)]
Pressure Characteristics (Representative values) Inlet pressure of 0.7 MPa, Outlet pressure of 0.2 MPa, Flow rate 20 l/min (ANR)
AW + AFM
AR20(K)-D AR30(K)-D
0.25 0.25
Outlet pressure [MPa]
AF
0.2 0.2
AFM / AFD
0.15 0.15
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Inlet pressure [MPa] Inlet pressure [MPa]
AR40(K)-D
AR
0.25
Outlet pressure [MPa]
AL
Set point
0.2
AW
0.15
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Inlet pressure [MPa]
48
AR20-D to AR40-D Series
AR20K-D to AR40K-D Series
Dimensions
Standard (Round Type Pressure Gauge)
AR20-D to AR40-D
W
C
K
IN OUT IN OUT
Z
V
Q
R
Plate thickness
B
P2
AR20-D to AR30-D: Max. 3.5
F (Pressure gauge port size) AR40-D : Max. 5
S
D U N
Bracket
J M T
(Option)
H
Centre of
piping
Optional specifications
Optional specifications
M N Q R S T U V W Y Z
AR20-D 30 34 43.9 5.4 15.4 55 2.3 24.7 28.5 14 6
AR30-D 41 40 46 6.5 8 53 2.3 31.3 38.5 19 7
AR40-D 50 54 54 8.5 10.5 70 2.3 35.5 42.5 21 7
∗1 The dimension of B is the length when the regulator knob is unlocked.
49
AR20-D to AR40-D Series Regulator
Dimensions
Standard (Square Embedded Type Pressure Gauge, Digital Pressure Switch)
AC
E E
E1 E1
AR20- E2
E3
-D to AR40- E2
E3
-D
E4 E4
AF + AR + AL
2 x P1 A Panel mounting dimensions
Port size
Y
W
C
K
IN OUT IN OUT
Z
V
Q
AW + AL
R
Plate thickness
B
AF + AR
D U N
Bracket
J M (Option)
T
AF + AFM + AR
J
J
H
Centre of
H
Centre of piping
piping
AW + AFM
Optional specifications
AF
AR30-D 1/4, 3/8 53 86.5 30.5 31.5 M38 x 1.5 3.5 28 32.5 27.8 43
AR40-D 1/4, 3/8, 1/2 70 91.5 35.5 40.5 M42 x 1.5 0 28 41.5 27.8 52
50
AR20-D to AR40-D Series
AR20K-D to AR40K-D Series
Dimensions
With Backflow Function
(Round Type Pressure Gauge, Square Embedded Type Pressure Gauge, Digital Pressure Switch)
AR20K-D to AR40K-D
W
C
K
IN OUT IN OUT
Z
V
Q
Plate thickness
B
D U Bracket N
J M (Option) T
J
J J
H
Centre of
H
H
Optional specifications
Optional specifications
Square
Digital pressure
Model embedded type Bracket mount Panel mount
switch
pressure gauge
H J H J M N Q R S T U V W Y Z
AR20K-D 28 27 27.8 37.5 30 34 43.9 5.4 15.4 55 2.3 24.7 28.5 14 6
AR30K-D 28 32.5 27.8 43 41 40 46 6.5 8 53 2.3 31.3 38.5 19 7
AR40K-D 28 41.5 27.8 52 50 54 54 8.5 10.5 70 2.3 35.5 42.5 21 7
∗1 The dimension of B is the length when the regulator knob is unlocked.
51
AR20-D to AR40-D Series
Regulator
AC
Be sure to read this before handling the products. Refer to the back cover for safety instructions. For F.R.L. units
precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual”, https://www.smc.eu
AF + AR + AL
Design/Selection Mounting/Adjustment
Warning Warning
1. Residual pressure disposal (outlet pressure removal) is not 1. Set the regulator while verifying the displayed values of the in-
possible for the AR20-D to AR40-D even though the inlet pres- let and outlet pressure gauges. Turning the regulator knob ex-
AW + AL
sure is exhausted. When the residual pressure disposal is per- cessively can cause damage to the internal parts.
formed, use the regulator with a backflow function (AR20K-D 2. Do not use tools on the pressure regulator knob as this may
to AR40K-D). cause damage. It must be operated manually.
Maintenance Caution
1. Be sure to unlock the knob before adjusting the pressure and
AF + AR
Warning lock it after setting the pressure. Failure to follow this proce-
1. When using the regulator with backflow function between a so- dure can cause damage to the knob and the outlet pressure
lenoid valve and an actuator, check the pressure gauge peri- may fluctuate.
odically. Sudden pressure fluctuations may shorten the durabil- • Pull the pressure regulator knob to unlock. (You can visually
ity of the pressure gauge. A digital pressure gauge is verify this with the “orange mark” that appears in the gap.)
AF + AFM + AR
recommended for such situation or as deemed necessary. • Push the pressure regulator knob to lock. When the knob is
not easily locked, turn it left and right a little and then push it
(when the knob is locked, the “orange mark”, i.e., the gap will
disappear).
AW + AFM
Orange mark
AF
AFM / AFD
AR
AL
AW
52
53
Modular Type
Lubricator
AL Series
AC
AF + AR + AL
Lubricator
AL Series Model Port size Options
AW + AL
AL30-D 1/4, 3/8 Bracket
AF + AR
AL40-D 1/4, 3/8, 1/2
p. 55 to 59
AF + AFM + AR
AW + AFM
AF
AFM / AFD
AR
AL
AW
54
Lubricator
Symbol
AL20-D to AL40-D
How to Order AL30-D
q
Symbol Description Body size
20 30 40
— Rc
w
Pipe thread type N NPT
F G
+
01 1/8 — —
02 1/4
e
Port size
03 3/8 —
04 1/2 — —
+
— Without mounting option
r
Option (Mounting)
B∗1 With bracket
+
— Polycarbonate bowl
2 Metal bowl
6 Nylon bowl
a Bowl∗2
8 Metal bowl with level gauge —
C With bowl guard —∗3 —∗3
6C With bowl guard (Nylon bowl) —∗4 —∗4
Semi-standard
+
— Without drain cock
t
b
Lubricant exhaust
3 With drain cock
port
3W∗5 Drain cock with barb fitting —
+
— Flow direction: Left to right
c Flow direction
R Flow direction: Right to left
+
— Unit on product label: MPa
d Unit
Z∗6 Unit on product label: psi ∗7 ∗7 ∗7
∗1 Option B is included in the package with the product but does not come assembled. Assembly of 2 types of the bracket and mounting screws (2 pcs.)
∗2 Refer to chemical data on page 59 for chemical resistance of the bowl.
∗3 A bowl guard is provided as standard equipment (polycarbonate).
∗4 A bowl guard is provided as standard equipment (nylon).
∗5 The combination of metal bowl 2 and 8 is not available.
∗6 For pipe thread type: NPT. This product is for overseas use only according to the new Measurement Act. (The SI unit type is provided for use in Japan.)
∗7 : For pipe thread type: NPT only
55
Lubricator AL20-D to AL40-D Series
Standard Specifications
Model AL20-D AL30-D AL40-D
Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2
Fluid Air
AC
Ambient and fluid temperatures -5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
AF + AR + AL
Port size 1/4: 30 l/min (ANR)
Port size 1/4: 30 l/min (ANR)
Minimum dripping flow rate∗1 15 l/min (ANR) Port size 3/8: 40 l/min (ANR)
Port size 3/8: 40 l/min (ANR)
Port size 1/2: 50 l/min (ANR)
Oil capacity 25 cm3 55 cm3 135 cm3
Recommended lubricant Class 1 turbine oil (ISO VG32)
Bowl material Polycarbonate
Bowl guard Semi-standard (Steel) Standard (Polycarbonate)
Weight 0.10 kg 0.18 kg 0.37 kg
AW + AL
∗1 The flow rate is 5 drops or greater/min under the following conditions: Inlet pressure of 0.5 MPa; Class 1 turbine oil (ISO VG32); Temperature at 20 °C; Oil adjustment valve fully open.
For a circuit that repeatedly turns ON and OFF on the outlet side, make the adjustment so that the average air consumption per minute becomes the minimum dripping flow rate
or more.
AF + AR
— C2SL-D — —
Without drain cock
With bowl guard C2SL-C-D C3SL-D C4SL-D
Polycarbonate — C2SL-3-D — —
With drain cock
With bowl guard C2SL-3C-D C3SL-3-D C4SL-3-D
Drain cock with barb fitting With bowl guard — C3SL-3W-D C4SL-3W-D
AF + AFM + AR
— C2SL-6-A — —
Without drain cock
With bowl guard C2SL-6C-A C3SL-6-A C4SL-6-A
Nylon — C2SL-36-A — —
With drain cock
With bowl guard C2SL-36C-A C3SL-36-A C4SL-36-A
Drain cock with barb fitting With bowl guard — C3SL-36W-A C4SL-36W-A
— C2SL-2-A C3SL-2-A C4SL-2-A
Without drain cock
With level gauge — C3LL-8-A C4LL-8-A
Metal
— C2SL-23-A C3SL-23-A C4SL-23-A
AW + AFM
With drain cock
With level gauge — C3LL-38-A C4LL-38-A
∗1 Bowl assembly comes with a bowl seal. Please consult with SMC separately for psi and °F unit display specifications.
AF
∗1 Assembly of a bracket A/B and 2 mounting screws Lubrication plug assembly AL24P-060AS AL34P-060AS AL44P-060AS
Bumper retainer assembly AL20P-030AS AL30P-030AS AL40P-030AS
Bracket B Bumper AL20P-040S AL30P-040S AL44P-040S
AFM / AFD
Bowl seal C2SFP-260S C32FP-260S C42FP-260S
Lubricator
Bowl assembly∗1, ∗2 Refer to “Bowl Assembly/Part No.”
∗1 Bowl assembly comes with a bowl seal.
∗2 Please consult with SMC separately for psi and °F unit display specifications.
AR
Bracket A
Mounting screw Bracket assembly
AL
AW
56
AL20-D to AL40-D Series
0.1 0.1
a
a
Pa
MP
Pa
Pa
MP
Pa
M
M
M
.3
M
7
5
0.08 0. 0.08
5
.3
0.
=0
Pa
0.
7
Pressure drop [MPa]
0.
=
M
=
P1
=
1.0
P1
P1
P1
P1
P1
a
Pa
=
MP
0.06 P1 0.06 Pa
.1 M
.0 M
.1
=1
=0
=0
P1
0.04
P1
0.04
P1
0.02 0.02
0 0
0 1000 2000 3000 4000 0 2000 4000 6000
Flow rate [l/min (ANR)] Flow rate [l/min (ANR)]
AL40-D Rc1/2
0.1
Pa
a
MP
.3 M
Pa
0.08
.5
=0
=0
Pressure drop [MPa]
M
7
0.
MPa
P1
P1
0.06 =
P1
0.1
a
MP
.0
P1 =
0.04 =1
P1
0.02
0
0 2000 4000 6000 8000
Flow rate [l/min (ANR)]
57
Lubricator AL20-D to AL40-D Series
Dimensions
AL20-D AL30-D to AL40-D
AC
Bracket
(Option)
J M T J M T
AF + AR + AL
U N D U N
D S S
R
R
V
V
C
Q
IN OUT IN OUT
AW + AL
2xP 2xP
B
B
Clearance for
maintenance
AF + AR
G
Clearance for
E A
maintenance
G
AF + AFM + AR
Semi-standard
Applicable PC/PA bowl Metal bowl Metal bowl with level gauge
model
AW + AFM
With drain cock Drain cock with barb fitting Without drain cock With drain cock Without drain cock With drain cock
B
B
AL20-D
B
AF
AL30-D
B
B
B
B
to AFM / AFD
AL40-D Barb fitting
applicable
tubing: T0604
Optional specifications
Standard specifications
Model Bracket mount
AR
P A B C D E G J M N Q R S T U V
AL20-D 1/8, 1/4 40 79.3 35.9 21 — 60 21 30 27 22 5.4 8.4 60 2.3 28
AL30-D 1/4, 3/8 53 104.3 38.1 26.5 30 80 26.5 41 35 25 6.5 13 71 2.3 32
AL40-D 1/4, 3/8, 1/2 70 136.1 44 35.5 38.4 110 35.5 50 52 30 8.5 12.5 88 2.3 39
AL
Semi-standard specifications
Metal bowl with
PC/PA bowl Metal bowl
level gauge
Model
With drain With barb Without With drain Without With drain
AW
Design/Selection Design/Selection
Warning Caution
1. Do not introduce air from the outlet side as this can damage 1. When the piping is branched on the inlet side, install a check
the bumper. valve to prevent the lubricant from back flowing.
2. The standard bowl and sight dome of the lubricator is
polycarbonate. Do not use in an environment where Maintenance
they are exposed to or come in contact with organic
solvents, chemicals, cutting oil, synthetic oil, alkali,
and thread lock solutions.
Warning
1. For the AL20-D, replenish the lubricant after releasing the inlet
Chemical resistance of polycarbonate bowl with sight pressure. Lubrication cannot take place under a pressurised
dome and nylon bowl with sight dome condition.
Material 2. Tighten the lubrication plug to the recommended tightening
Type Chemical name Application examples
Polycarbonate Nylon
torque. Insufficient tightening torque may cause loosening or
Hydrochloric acid
Sulfuric acid Acid washing liquid defective sealing. Excessive tightening torque may damage the
Acid ҂
Phosphoric acid for metals thread, etc.
Chromic acid
Sodium hydroxide (Caustic soda)
Recommended Torque Unit: N·m
Potash Degreasing of metals Model AL20-D AL30-D AL40-D
Torque 0.25 to 0.35 0.35 to 0.45 0.5 to 0.6
Alkaline Calcium hydroxide (Slack lime) Industrial salts ҂
Ammonia water Water-soluble cutting oil
Carbonate of soda
3. Adjustment of the oil regulating valve for models from the
Sodium sulfide AL20-D to AL40-D should be carried out manually. Turning it
Inorganic
Potassium nitrate — ҂ counterclockwise increases the dripping amount, and turning it
salts
Sulfate of soda clockwise reduces the dripping amount. The use of tools can
Carbon tetrachloride
Cleansing liquid for metals result in damage to the unit. From the fully closed position,
Chlorine Chloroform
Printing ink ҂ three rotations will bring it to the fully open position. Do not ro-
solvents Ethylene chloride
Dilution
Methylene chloride tate it any further than this. Note that the numbered scale
Benzene markings are guidelines for adjusting the position, and not indi-
Aromatic Coatings
Toluene ҂ cators of the dripping amount.
series Dry cleaning
Paint thinner
Acetone Photographic film
Ketone Methyl ethyl ketone Dry cleaning ҂ ҂
Mounting/Adjustment
Cyclohexane Textile industries
Ethyl alcohol
Alcohol IPA
Antifreeze
Adhesives
҂ Caution
Methyl alcohol 1. When the lubricator bowl is installed on the AL30-D to AL40-D,
Gasoline install them so that the lock button lines up to the groove of the
Oil — ҂
Kerosene front (or the back) of the body to avoid drop or damage of the
Phthalic acid dimethyl bowl.
Synthetic oil
Ester Phthalic acid diethyl ҂
Anti-rust additives
Acetic acid
Methyl ether Groove of the body
Ether Brake oil additives ҂
Ethyl ether
Cutting oil
Amino Methyl amino Brake oil additives ҂ ҂
Rubber accelerator
Lock button
Thread-lock fluid
Others Seawater — ҂
Leak tester
: Essentially safe : Some effects may occur. ҂: Effects will occur.
When the above factors are present, or there is some doubt, use a metal bowl
for safety.
59
Modular Type
Filter Regulator
AW Series
AC
AF + AR + AL
Filter Regulator
Model Port size Set pressure Options
AW Series
Bracket
AW20(K)-D 1/8, 1/4
AW + AL
Set nut
(for panel mount)
AF + AR
Digital pressure switch
AW40(K)-D 1/4, 3/8, 1/2
p. 61 to 68 Round type pressure gauge
AF + AFM + AR
AW + AFM
AF
AFM / AFD
AR
AL
AW
60
Filter Regulator Symbol Filter Regulator with
AW20K-D to AW40K-D
· Integrated filter and regulator units save space and require less piping.
· Models with the backflow function include a mechanism which allows for the air pressure in the outlet side to be released to the inlet side.
12
Example)
When the air supply is cut off and releasing the inlet pressure to the atmosphere, the residual 1 2 1 2 1 2
3
pressure release of the outlet side can be ensured for a safety purpose.
10
How to Order
q w e r t y Example) AW30K-03BE-1NR-D
q
Symbol Description Body size
20 30 40
— Without backflow function
w
With backflow function
K∗1 With backflow function
+
— Rc
e
Pipe thread type N NPT
F G
+
01 1/8 — —
02 1/4
r
Port size
03 3/8 —
04 1/2 — —
+
— Without mounting option
a Mounting B∗3 With bracket
H With set nut (for panel mount)
+
— Without auto drain
Float type auto
b
drain∗4
C∗5 N.C. (Normally closed) Drain port is closed when pressure is not applied.
D∗6 N.O. (Normally open) Drain port is open when pressure is not applied. —
Option∗2
+
t
— Without pressure gauge
E Square embedded type pressure gauge (with limit indicator)
Pressure gauge∗7
G Round type pressure gauge (with limit indicator)
M Round type pressure gauge (with colour zone)
c
E1 Output: NPN output, Electrical entry: Wiring bottom entry
Digital pressure E2 Output: NPN output, Electrical entry: Wiring top entry
switch∗8 E3 Output: PNP output, Electrical entry: Wiring bottom entry
E4 Output: PNP output, Electrical entry: Wiring top entry
+
— 0.05 to 0.85 MPa setting
d Set pressure∗9
1 0.02 to 0.2 MPa setting
+
— Polycarbonate bowl
2 Metal bowl
Semi-standard
6 Nylon bowl
e Bowl∗10
8 Metal bowl with level gauge —
y
C With bowl guard —∗11 —∗11
6C With bowl guard (Nylon bowl) —∗12 —∗12
+
— With drain cock
Drain guide 1/8 — —
f Drain port∗13 J∗14
Drain guide 1/4 —
W∗15 Drain cock with barb fitting —
61
AW20-D to AW40-D Series
Filter Regulator
AC
AF + AR + AL
AW30-D
AW + AL
q
Symbol Description Body size
20 30 40
AF + AR
— Relieving type
g Exhaust mechanism
N Non-relieving type
+
Semi-standard
AF + AFM + AR
— Unit on product label: MPa, Pressure gauge in SI units: MPa
i Unit Z∗16 Unit on product label: psi, °F, Pressure gauge: MPa/psi dual scale ∗18 ∗18 ∗18
ZA∗17 Digital pressure switch: With unit selection function ∗19 ∗19 ∗19
∗1 Set the inlet pressure to at least 0.05 MPa higher than the set pressure. ∗9 Pressure can be set higher than the specification pressure in some cases, but use
∗2 Options B, G, H, and M are not assembled and supplied loose at the time of shipment. pressure within the specification range.
∗3 Assembly of a bracket and set nuts (applicable to the AR20(K)-D to AR40(K)-D). ∗10 Refer to chemical data on page 68 for chemical resistance of the bowl.
∗4 The auto drain port is Ø 10 One-touch fitting (w Pipe thread type: Rc, G) or Ø 3/8” ∗11 A bowl guard is provided as standard equipment (polycarbonate).
One-touch fitting (w Pipe thread type: NPT) ∗12 A bowl guard is provided as standard equipment (nylon).
∗5 When pressure is not applied, condensate which does not start the auto drain ∗13 The combination of float type auto drain C and D is not available.
AW + AFM
mechanism will be left in the bowl. Releasing the residual condensate before ∗14 Without a valve function. The mounting screws are the same as the thread of w.
ending operations for the day is recommended. ∗15 The combination of metal bowl 2 and 8 is not available.
∗6 If the compressor is small (0.75 kW, discharge flow is less than 100 l/min (ANR)), ∗16 For pipe thread type: NPT. This product is for overseas use only according to the
air leakage from the drain cock may occur during the start of operations. N.C. type new Measurement Act. (The SI unit type is provided for use in Japan.) Cannot be
is recommended. used with M: Round type pressure gauge (with colour zone). Available by request
∗7 When the pressure gauge is attached, a 1.0 MPa pressure gauge will be fitted for for special. The digital pressure switch will be equipped with the unit selection
standard (0.85 MPa) type. 0.4 MPa pressure gauge for 0.2 MPa type. function, setting to psi initially.
∗8 When choosing with H (panel mount), the installation space for lead wires will not ∗17 For options: E1, E2, E3, E4
be secured. In this case, select “wiring top entry” for the electrical entry. (Select ∗18 : For pipe thread type: NPT only
“wiring bottom entry” when the semi-standard Y is chosen simultaneously.) ∗19 : Select with options: E1, E2, E3, E4.
AF
Standard Specifications
Model AW20-D AW30-D AW40-D
Port size 1/8, 1/4 1/4, 3/8 1/4, 3/8, 1/2
AFM / AFD
Pressure gauge port size∗1 1/8
Fluid Air
Ambient and fluid temperatures∗2 −5 to 60 °C (with no freezing)
Proof pressure 1.5 MPa
Max. operating pressure 1.0 MPa
Auto drain minimum N.C. 0.1 MPa 0.15 MPa
AR
∗1 Pressure gauge connection threads are not available for F.R.L. unit with a square embedded type pressure gauge or with a digital pressure switch.
∗2 –5 to 50 °C for the products with the digital pressure switch
∗3 [Compliant to test condition ISO 8573-4:2001 and test method ISO 12500-3:2009]
Conditions: New element. Flow capacity, inlet pressure, and the amount of solid bodies at the filter inlet are stable.
∗4 The compressed air purity class is indicated based on ISO 8573-1:2010 Compressed air – Part 1: Contaminants and purity classes.
For details on this standard, refer to page 37.
∗5 The compressed air quality class on the inlet side is [ 7 : 4 : 4 ].
62
AW20-D to AW40-D Series
AW20K-D to AW40K-D Series
Bowl Assembly/Part No.
Drain discharge Model
Bowl material Drain port Other
mechanism AW20-D AW30-D AW40-D
— C2SF-D — —
With drain cock
With bowl guard C2SF-C-D C3SF-D C4SF-D
Manual Drain cock with barb fitting With bowl guard — C3SF-W-D C4SF-W-D
With drain guide — C2SF-J-D — —
Polycarbonate
(without valve function) With bowl guard C2SF-CJ-D C3SF-J-D C4SF-J-D
— AD27-D — —
Automatic∗1 Normally closed (N.C.)
With bowl guard AD27-C-D AD37-D AD47-D
(Auto drain)
Normally open (N.O.) With bowl guard — AD38-D AD48-D
— C2SF-6-A — —
With drain cock
With bowl guard C2SF-6C-A C3SF-6-A C4SF-6-A
Manual Drain cock with barb fitting With bowl guard — C3SF-6W-A C4SF-6W-A
With drain guide — C2SF-6J-A — —
Nylon
(without valve function) With bowl guard C2SF-6CJ-A C3SF-6J-A C4SF-6J-A
— AD27-6-A — —
Automatic∗1 Normally closed (N.C.)
With bowl guard AD27-6C-A AD37-6-A AD47-6-A
(Auto drain)
Normally open (N.O.) With bowl guard — AD38-6-A AD48-6-A
— C2SF-2-A C3SF-2-A C4SF-2-A
With drain cock
With level gauge — C3LF-8-A C4LF-8-A
Manual
With drain guide — C2SF-2J-A C3SF-2J-A C4SF-2J-A
(without valve function) With level gauge — C3LF-8J-A C4LF-8J-A
Metal
— AD27-2-A AD37-2-A AD47-2-A
Normally closed (N.C.)
Automatic∗1 With level gauge — AD37-8-A AD47-8-A
(Auto drain) — — AD38-2-A AD48-2-A
Normally open (N.O.)
With level gauge — AD38-8-A AD48-8-A
∗1 Bowl assembly comes with a bowl seal.
in bowl assembly part numbers indicates a pipe thread type (applicable tubing for auto drain).
No indication is necessary for Rc thread; however, indicate N for NPT thread, and F for G thread. (For auto drain, —: Ø 10, N: Ø 3/8")
Please consult with SMC separately for psi and °F unit display specifications.
Option/Part No.
Model
Optional specifications
AW20(K)-D AW30(K)-D AW40(K)-D
Bracket assembly∗1 AW23P-270AS AR33P-270AS AR43P-270AS
Set nut AR23P-260S AR33P-260S AR43P-260S
Standard G36-10-01 G46-10-01
Round type
0.02 to 0.2 MPa setting G36-4-01 G46-4-01
Pressure Round type Standard G36-10-01-L G46-10-01-L
gauge∗2 (with colour zone) 0.02 to 0.2 MPa setting G36-4-01-L G46-4-01-L
Square Standard GC3-10AS-D [136150A (Pressure gauge cover only)]
embedded type∗3 0.02 to 0.2 MPa setting GC3-4AS-D [136150A (Pressure gauge cover only)]
NPN output, Wiring bottom entry ISE35-N-25-MLA-X523 [ISE35-N-25-M (Switch body only)]∗4
NPN output, Wiring top entry ISE35-R-25-MLA-X523 [ISE35-R-25-M (Switch body only)]∗4
Digital pressure switch
PNP output, Wiring bottom entry ISE35-N-65-MLA-X523 [ISE35-N-65-M (Switch body only)]∗4
PNP output, Wiring top entry ISE35-R-65-MLA-X523 [ISE35-R-65-M (Switch body only)]∗4
∗1 Assembly of a bracket and set nuts
∗2 in part numbers for a round type pressure gauge indicates a pipe thread type. No indication is necessary for R; however, indicate N for NPT. Please contact SMC regarding
the pressure gauge supply for psi unit specifications.
∗3 Including one O-ring and 2 mounting screws. [ ]: Pressure gauge cover only
∗4 In addition to the pressure switch body, lead wire with connector (2 m), adapter, lock pin, O-ring (1 pc.), mounting screws (2 pcs.) are attached.
[ ]: Switch body only (Regarding how to order the digital pressure switch, refer to the Web Catalogue.)
Replacement Parts
Part no.
Description
AW20(K)-D AW30(K)-D AW40(K)-D
Valve assembly AW24P-060AS AW34P-060AS AW44P-060AS
Filter element AF20P-060S AF30P-060S AF40P-060S
Baffle AF24P-040S AF34P-040S AF44P-040S
Diaphragm assembly AR24P-150AS AR34P-150AS AR44P-150AS
Bowl seal C2SFP-260S C32FP-260S C42FP-260S
Bowl assembly∗1, ∗2 Refer to “Bowl Assembly/Part No.”
Check valve assembly∗3 AR24KP-020AS
∗1 Bowl assembly comes with a bowl seal.
∗2 Please consult with SMC separately for psi and °F unit display specifications.
∗3 Check valve assembly is applicable for a filter regulator with backflow function (AW20K-D to AW40K-D) only. Assembly of a check valve cover, check valve body assembly and 2
mounting screws
63
AW20-D to AW40-D Series
Filter Regulator
AC
0.8 0.8
0.7 0.7
Outlet pressure [MPa]
AF + AR + AL
0.6 0.6
0.5 0.5
0.4 0.4
0.3 0.3
0.2 0.2
0.1 0.1
AW + AL
0 0
0 500 1000 1500 2000 0 1000 2000 3000 4000
Flow rate [l/min (ANR)] Flow rate [l/min (ANR)]
AW40(K)-D Rc1/2
0.8
0.7
AF + AR
Outlet pressure [MPa]
0.6
0.5
0.4
0.3
AF + AFM + AR
0.2
0.1
0
0 1000 2000 3000 4000 5000 6000 7000
Flow rate [l/min (ANR)]
Pressure Characteristics (Representative values) Inlet pressure of 0.7 MPa, Outlet pressure of 0.2 MPa, Flow rate 20 l/min (ANR)
AW + AFM
AW20(K)-D AW30(K)-D
0.25 0.25
Outlet pressure [MPa]
AF
0.2 0.2
AFM / AFD
0.15 0.15
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Inlet pressure [MPa] Inlet pressure [MPa]
AW40(K)-D
AR
0.25
Outlet pressure [MPa]
AL
Set point
0.2
AW
0.15
0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1
Inlet pressure [MPa]
64
AW20-D to AW40-D Series
AW20K-D to AW40K-D Series
Dimensions
Standard (Round Type Pressure Gauge)
AW20-D AW30-D, AW40-D
J M J M
U T U T
Bracket
D (Option)
N D N
S S
F F
R
R
C
C
Q
Q
V
K
K
IN OUT IN OUT
P2
(Pressure gauge port size)
P2
(Pressure gauge port size)
B
2 x P1
2 x P1
B
Port size
Port size
Clearance for
maintenance
Clearance for
G
maintenance
Drain
A
G
Drain
Panel mounting dimensions E A
Y
Round type pressure gauge
W
IN OUT J
Z
H
Centre of
Plate thickness
piping
AW20-D to AW30-D: Max. 3.5
AW40-D : Max. 5
Optional specifications Semi-standard
Applicable
PC/PA bowl Metal bowl Metal bowl with level gauge
model With auto drain
Drain cock with barb fitting With drain guide With drain cock With drain guide With drain cock With drain guide
B
B
B
B
AW20-D
M5 x 0.8 1/8 1/8
Width across flats 14 Width across flats 14
N.O.: Black
N.C.: Grey
B
B
B
B
B
AW30-D
AW40-D Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting
Optional specifications
Standard specifications Round type Round type pressure Round type pressure
Model
pressure gauge gauge (Semi-standard: Z) gauge (with colour zone)
P1 P2 A B C∗1 D E F G J K H J H J H J
AW20-D 1/8, 1/4 1/8 40 87.6 71.8 21 — M28 x 1 40 21 5 Ø 37.5 57.5 Ø 37.5 58.5 Ø 37.5 58.5
AW30-D 1/4, 3/8 1/8 53 115.3 86.5 26.5 30 M38 x 1.5 55 26.5 3.5 Ø 37.5 63 Ø 37.5 64 Ø 37.5 64
AW40-D 1/4, 3/8, 1/2 1/8 70 147.1 91.5 35.5 38.4 M42 x 1.5 80 35.5 0 Ø 42.5 73 Ø 42.5 73 Ø 42.5 73
Optional specifications Semi-standard
Metal bowl with
With PC/PA bowl Metal bowl
level gauge
Model Bracket mount Panel mount auto
drain With barb With drain With drain With drain With drain With drain
fitting guide cock guide cock guide
M N Q R S T U V W Y Z B B B B B B B
AW20-D 30 34 43.9 5.4 15.4 55 2.3 29.7 28.5 14 6 104.9 — 91.4 87.4 93.9 — —
AW30-D 41 40 46 6.5 8 53 2.3 31.3 38.5 19 7 157 123.9 122.2 117.8 122.3 137.8 142.3
AW40-D 50 54 54 8.5 10.5 70 2.3 35.5 42.5 21 7 186.9 155.6 153.9 149.5 154 169.5 174
∗1 The dimension of C is the length when the filter regulator knob is unlocked.
65
AW20-D to AW40-D Series Filter Regulator
Dimensions
Standard (Square Embedded Type Pressure Gauge, Digital Pressure Switch)
AC
E E E
E1 E1 E1
AW20- E2
E3
-D AW30- E2
E3
-D, AW40- E2
E3
-D
E4 E4 E4
J M J M
AF + AR + AL
U T U T
Bracket
D (Option) N D N
S S
F F
R
R
C
C
Q
Q
AW + AL
V
K
K
IN OUT IN OUT
B
2 x P1
2 x P1
B
Port size
Port size
AF + AR
Clearance for
maintenance
Clearance for
G
maintenance
Drain
A
G
Drain
Panel mounting dimensions E A
AF + AFM + AR
Y
Square embedded type
Digital pressure switch
W
pressure gauge
IN OUT J
J
Z
H
Centre of
H
Centre of piping
Plate thickness
piping
AW20-D to AW30-D: Max. 3.5
AW40-D : Max. 5
AW + AFM
Optional specifications Semi-standard
Applicable
PC/PA bowl Metal bowl Metal bowl with level gauge
model With auto drain
Drain cock with barb fitting With drain guide With drain cock With drain guide With drain cock With drain guide
B
B
B
B
AW20-D
M5 x 0.8 1/8 1/8
AF
Width across flats 14 Width across flats 14
N.O.: Black
N.C.: Grey AFM / AFD
B
B
B
B
B
AW30-D
AW40-D Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting
Optional specifications
AR
AW40-D 1/4, 3/8, 1/2 70 147.1 91.5 40.5 38.4 M42 x 1.5 80 0 28 41.5 27.8 52
Optional specifications Semi-standard
Metal bowl with
With PC/PA bowl Metal bowl
level gauge
Model Bracket mount Panel mount auto
drain With barb With drain With drain With drain With drain With drain
AW
J M J M
U T U T
Bracket
D N D N
(Option)
S S
F F
R
R
C
C
Q
Q
V
K
K
IN OUT IN OUT
P2
(Pressure gauge port size) P2
(Pressure gauge port size)
B
2 x P1
2 x P1
B
Port size
Port size
Clearance for
maintenance
Clearance for
G
maintenance
Drain
A
G
Drain
E A
Panel mounting dimensions
Y
Square embedded type
Round type pressure gauge Digital pressure switch
W
pressure gauge
IN OUT J
J
J
Z
H
Centre of
H
Centre of
H
B
B
AW20K-D
M5 x 0.8 1/8 1/8
Width across flats 14 Width across flats 14
N.O.: Black
N.C.: Grey
B
B
B
B
B
AW30K-D
AW40K-D Thread type/Rc, G: Barb fitting
Ø 10 One-touch fitting 1/4 1/4 1/4
applicable
Thread type/NPT: tubing: T0604 Width across flats 17 Width across flats 17 Width across flats 17
Ø 3/8" One-touch fitting
Optional specifications
Standard specifications Square embedded Digital pressure Round type Round type pressure
Model
type pressure gauge switch pressure gauge gauge (Semi-standard: Z)
P1 P2 A B C ∗1 D E F G J K H J H J H J H J
AW20K-D 1/8, 1/4 1/8 40 87.6 71.8 26 — M28 x 1 40 26 5 28 27 27.8 37.5 Ø 37.5 62.5 Ø 37.5 63.5
AW30K-D 1/4, 3/8 1/8 53 115.3 86.5 31.5 30 M38 x 1.5 55 31.5 3.5 28 32.5 27.8 43 Ø 37.5 68 Ø 37.5 69
AW40K-D 1/4, 3/8, 1/2 1/8 70 147.1 91.5 40.5 38.4 M42 x 1.5 80 40.5 0 28 41.5 27.8 52 Ø 42.5 78 Ø 42.5 78
Optional specifications Semi-standard
Round type Metal bowl with
With PC/PA bowl Metal bowl
pressure gauge level gauge
Model Bracket mount Panel mount auto
(with colour
drain With barb With drain With drain With drain With drain With drain
zone) fitting guide cock guide cock guide
H J M N Q R S T U V W Y Z B B B B B B B
AW20K-D Ø 37.5 63.5 30 34 43.9 5.4 15.4 55 2.3 29.7 28.5 14 6 104.9 — 91.4 87.4 93.9 — —
AW30K-D Ø 37.5 69 41 40 46 6.5 8 53 2.3 31.3 38.5 19 7 157 123.9 122.2 117.8 122.3 137.8 142.3
AW40K-D Ø 42.5 78 50 54 54 8.5 10.5 70 2.3 35.5 42.5 21 7 186.9 155.6 153.9 149.5 154 169.5 174
∗1 The dimension of C is the length when the filter regulator knob is unlocked.
67
AW20-D to AW40-D Series Filter Regulator
AC
Be sure to read this before handling the products. Refer to the back cover for safety instructions. For F.R.L. units
precautions, refer to the “Handling Precautions for SMC Products” and the “Operation Manual”, https://www.smc.eu
AF + AR + AL
Design/Selection Maintenance
Warning Warning
1. Residual pressure disposal (outlet pressure removal) is not possi- 1. Replace the element every 2 years or when the pressure drop
ble for the AW20-D to AW40-D even though the inlet pressure is becomes 0.1 MPa, whichever comes first, to prevent damage
exhausted. When the residual pressure disposal is performed, use to the element.
AW + AL
the filter regulator with backflow function (AW20K-D to AW40K-D).
2. The bowl material of the standard filter regulator is Mounting/Adjustment
polycarbonate. Do not use in an environment where
they are exposed to or come in contact with organic Warning
solvents, chemicals, cutting oil, synthetic oil, alkali, 1. Set the filter regulator while verifying the displayed values of
and thread lock solutions. the inlet and outlet pressure gauges. Turning the regulator
AF + AR
knob excessively can cause damage to the internal parts.
Chemical resistance of polycarbonate or nylon bowl 2. Do not use tools on the pressure regulator knob as this may
Material cause damage. It must be operated manually.
Type Chemical name Application examples
Polycarbonate Nylon
AF + AFM + AR
Hydrochloric acid
Acid
Sulfuric acid Acid washing liquid
҂
Caution
Phosphoric acid for metals 1. Be sure to unlock the knob before adjusting the pressure and
Chromic acid lock it after setting the pressure.
Sodium hydroxide (Caustic soda)
Failure to follow this procedure can cause damage to the knob
Potash Degreasing of metals
Alkaline Calcium hydroxide (Slack lime) Industrial salts ҂ and the outlet pressure may fluctuate.
Ammonia water Water-soluble cutting oil • Pull the pressure regulator knob to unlock. (You can visually
Carbonate of soda verify this with the “orange mark” that appears in the gap.)
AW + AFM
Sodium sulfide • Push the pressure regulator knob to lock. When the knob is
Inorganic
Potassium nitrate — ҂
salts not easily locked, turn it left and right a little and then push it
Sulfate of soda
Carbon tetrachloride (when the knob is locked, the “orange mark”, i.e., the gap will
Cleansing liquid for metals
Chlorine Chloroform disappear).
Printing ink ҂
solvents Ethylene chloride
Dilution Orange mark
Methylene chloride
Benzene
Aromatic Coatings
AF
Toluene ҂
series Dry cleaning
Paint thinner
Acetone Photographic film
Ketone Methyl ethyl ketone Dry cleaning ҂ ҂ AFM / AFD
Cyclohexane Textile industries Groove of the body
Ethyl alcohol
Antifreeze
Alcohol IPA ҂
Adhesives
Methyl alcohol
Gasoline Lock
Oil — ҂ button
Kerosene
AR
Ethyl ether
(or the back) of the body to avoid drop or damage of the bowl.
Cutting oil
Amino Methyl amino Brake oil additives ҂ ҂
Rubber accelerator
Thread-lock fluid
҂
AW
Others Seawater —
Leak tester
: Essentially safe : Some effects may occur. ҂: Effects will occur.
When the above factors are present, or there is some doubt, use a metal bowl
for safety.
68
These safety instructions are intended to prevent hazardous situations and/or equipment
Safety Instructions damage. These instructions indicate the level of potential hazard with the labels of
“Caution,” “Warning” or “Danger.” They are all important notes for safety and must be
followed in addition to International Standards (ISO/IEC) 1), and other safety regulations.
1) ISO 4414: Pneumatic fluid power – General rules relating to systems.
Caution indicates a hazard with a low level of risk
ISO 4413: Hydraulic fluid power – General rules relating to systems.
Caution: which, if not avoided, could result in minor or moderate IEC 60204-1: Safety of machinery – Electrical equipment of machines.
injury. (Part 1: General requirements)
Warning indicates a hazard with a medium level of risk ISO 10218-1: Manipulating industrial robots - Safety.
etc.
Warning: which, if not avoided, could result in death or serious
injury.
Danger indicates a hazard with a high level of risk
Danger: which, if not avoided, will result in death or serious
injury.
Safety Instructions Be sure to read “Handling Precautions for SMC Products” (M-E03-3) before using.
SMC Corporation (Europe)
Austria +43 (0)2262622800 www.smc.at office@smc.at Lithuania +370 5 2308118 www.smclt.lt info@smclt.lt
Belgium +32 (0)33551464 www.smc.be info@smc.be Netherlands +31 (0)205318888 www.smc.nl info@smc.nl
Bulgaria +359 (0)2807670 www.smc.bg office@smc.bg Norway +47 67129020 www.smc-norge.no post@smc-norge.no
Croatia +385 (0)13707288 www.smc.hr office@smc.hr Poland +48 222119600 www.smc.pl office@smc.pl
Czech Republic +420 541424611 www.smc.cz office@smc.cz Portugal +351 214724500 www.smc.eu apoioclientept@smc.smces.es
Denmark +45 70252900 www.smcdk.com smc@smcdk.com Romania +40 213205111 www.smcromania.ro smcromania@smcromania.ro
Estonia +372 6510370 www.smcpneumatics.ee info@smcee.ee Russia +7 8123036600 www.smc.eu sales@smcru.com
Finland +358 207513513 www.smc.fi smcfi@smc.fi Slovakia +421 (0)413213212 www.smc.sk office@smc.sk
France +33 (0)164761000 www.smc-france.fr info@smc-france.fr Slovenia +386 (0)73885412 www.smc.si office@smc.si
Germany +49 (0)61034020 www.smc.de info@smc.de Spain +34 945184100 www.smc.eu post@smc.smces.es
Greece +30 210 2717265 www.smchellas.gr sales@smchellas.gr Sweden +46 (0)86031200 www.smc.nu smc@smc.nu
Hungary +36 23513000 www.smc.hu office@smc.hu Switzerland +41 (0)523963131 www.smc.ch helpcenter@smc.ch
Ireland +353 (0)14039000 www.smcautomation.ie sales@smcautomation.ie Turkey +90 212 489 0 440 www.smcpnomatik.com.tr info@smcpnomatik.com.tr
Italy +39 03990691 www.smcitalia.it mailbox@smcitalia.it UK +44 (0)845 121 5122 www.smc.uk sales@smc.uk
Latvia +371 67817700 www.smc.lv info@smc.lv
Printing YP 00 Printed in Spain Specifications are subject to change without prior notice and any obligation on the part of the manufacturer