Professional Documents
Culture Documents
342
SANDVIK CJ411:01
This document is valid for:
SANDVIK CJ411:01
Sandvik
Stationsplan, SE-233 81 Svedala, Sweden
Tel: +46 (0)40 409000, Fax: +46 (0)40 409260
www.sandvik.com
WPC Sandvik CJ411:01
General
Ordering information
When ordering parts, always state the machine type, manufacturing number,
serial number and order number according to the identification plate on the
cone crusher or tank. State quantity, article number and denomination for
each ordered part. The quantities listed in this catalog show how many pieces
of each part that are usually exchanged in a certain position.
Crusher’s identification plate
The figure below shows an example of the crusher’s identification plate.
The identification plate contains data needed when contacting Sandvik
concerning wear parts.
Please enter the serial number of the associated machine in the intended field
on the first page of this wear part catalog (the copyright page).
1 2 3 4
Identification plate:
1 Machine type
2 Part number
3 Serial number
4 Order number
Think ahead!
Avoid unnecessary downtime and increased freight charges by ordering parts
well in advance.
Adjustment shims
5002-0
Jaw plates
1208-1
3300-1
(Continued)
Corrugated
C
Coarse corrugated
CC
Wide teeth
WT
Wear plates
1300-0
3100-0
Support bars
Cheek plates
1104-1 1103-1 1103-2
1104-2
1106-0
1106-4
1106-5
1106-2
1106-1