Professional Documents
Culture Documents
Q2. FIGURE Q2(a) shows a double overhanging beam supported by two columns.
FIGURE Q2(b) shows the cross-section of the beam. Other design
specifications of the beam are as follows:
(a) Draw the shear force and bending moment diagrams for the beam. Show
all the important values in the diagrams.
(6 marks)
(c) Design the vertical shear reinforcements for the beam. Ignore the design
for transverse shear reinforcement.
(6 marks)
(d) Check the deflection and cracking control of the beam.
(6 marks)
(a)
(b)
FIGURE Q2