Professional Documents
Culture Documents
www.themegallery.com
1
Low Cost Fabrication of
HydroGel Based Glucose
Sensitive Microvalve
2
3
PHD Years to Thesis Chapters Conversation Chart
4
Aug Sep Oct Nov Dec Jan Feb Mar Apr May Jun Jul
2010/2011
1 Literature review
2 Design
2011/2012
2 Design
3 Simulation
4 Optimization
2012/2013
6 Fabrication process
5
6
1
7
8
Type 1: Type 1 diabetes is
when there is no
insulin in the body. It
also tells about the
pancreas and on how
beta-cells produce.
because of this. This
normally leads to
increased blood and
urine glucose.
9
Type 2: Type 2 Diabetes is
when the body cells fail to
respond properly to the
insulin. This is normally
occurred because of the
reduction of exercise or an
non-balanced diet.
10
11
12
Ordinary Insulin Delivery : Injection
13
Ordinary Insulin Delivery : Modern Injection
14
Pulmonary Delivery Methods
15
closed-loop system for Insulin Delivery
16
Insulin delivery is a completely different issue with Glucose monitoring
but it always need to monitor the Insulin levels in blood.
17
1
18
19
20
Liu et al, JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 11, NO. 1, FEBRUARY 2002.
21
HydroGel Based Normally Open MicroValves
with Porous Diffusion
Baldi et al, JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, VOL. 12, NO. 5, OCTOBER 2003.
22
Tehranirokh et al, JOURNAL OF Microsyst Technol (2009).
23
24
Insulin From
Outlet to
Reservoir
MICROCHANNEL
Micro Channel
SU8
Hydro GEL
GLASS
AnoDisc Filter
Design Flow
Simulation
26
First Step is Fabrication of Mold, I selected SU8 and PUMA
Resin as mold material, extracting timing is under
progress now.
27
The attention of SU8 to Silicon substrate is not
enough to remain structure after develop step and
rinsing.
28
Structure
Semi Cured SU8 (EXP: 60 sec, without develop)
Silicon Substrate
29
30
31
32
33
34
Add Your Company Slogan
Thank You!
L/O/G/O
www.themegallery.com
35