The document provides remedies for an open circuit intake manifold air temperature sensor. It lists 6 potential remedies: check for loose connections; inspect the sensor and connectors for damage; verify sensor resistance values according to a provided temperature-resistance table; check continuity between the ECU and sensor; check continuity between the ECU and interconnect; and check continuity between the interconnect and sensor. The key recommended step is to verify the sensor resistance values are within the specified range in the table according to temperature.
The document provides remedies for an open circuit intake manifold air temperature sensor. It lists 6 potential remedies: check for loose connections; inspect the sensor and connectors for damage; verify sensor resistance values according to a provided temperature-resistance table; check continuity between the ECU and sensor; check continuity between the ECU and interconnect; and check continuity between the interconnect and sensor. The key recommended step is to verify the sensor resistance values are within the specified range in the table according to temperature.
The document provides remedies for an open circuit intake manifold air temperature sensor. It lists 6 potential remedies: check for loose connections; inspect the sensor and connectors for damage; verify sensor resistance values according to a provided temperature-resistance table; check continuity between the ECU and sensor; check continuity between the ECU and interconnect; and check continuity between the interconnect and sensor. The key recommended step is to verify the sensor resistance values are within the specified range in the table according to temperature.
Verify Sensor Resistance Remedy #1 #3 Check for Loose Connection Between ECU and Sensor 1. Verify resistance value between sensor pin "A" and pin "B" using table below: Remedy #2 Inspect Sensor and Connectors for Damage Temperature Resistance
Remedy #3 Celsius Fahrenheit Ohms
Verify Sensor Resistance -18 0 23650 – 27065 Remedy #4 Check Continuity Between ECU 16 60 1303 – 1425 and Sensor 85 185 277.6 – 295.5 Remedy #5 Check Continuity Between ECU 100 212 175.1 – 184.7 and Interconnect (values are approximate) Remedy #6 Check Continuity Between Interconnect and Sensor NOTE: See latest edition of Operation & Maintenance Manual for sensor replacement procedures.
If resistance checks are within
specifications, continue OK to Remedy #4.
If resistance checks are not
within specifications, replace sensor. If the fault is no longer active, continue to clear fault NOT OK code. If the fault is still active, continue to Remedy #4.