Professional Documents
Culture Documents
H H H
h h
a b
q h
Q q Q
q Q
1. Calculate the duty point (a) for the 2. Choose a pump model from the family of 3. Choose curve (b) according to
system. curves that match the system calculated duty point.
requirements.
Introduction
This is a serie of in-line centrifugal pumps, available in
single stage design. They cover an extensive
performance range and can be used in a variety of
applications, for pumping clean hot and cold liquids in
buildings and in industrial applications. The program
extends from 0 l/s to 3 l/s. The material of impeller is
composite. The pump is intended to be connected
directly to the pipes.
Applications
• Heat recirculation
• Air conditioning
Mechanically
adjustable Wheel diameter, mm
capacity Not applicable for AHV pumps
Number of poles
2 = 3000 rpm
4 = 1500 rpm
Connection diameter
3
AHV/AE Inline Centrifugal Pumps
20
10 AE26/2 AE33/2
2
AHV25/2
AE33/4
1
AE26/4
AHV25/4
0.5
0.5 1 2 4 l/s
3
2 4 5 8 10 12 14 16 m /h
4
AHV 25
Material
Part Material
Pump body Cast iron EN-GJL-200
Seal housing Cast iron EN-GJL-200
Impeller Composit Noryl
O-rings Nitrile NBR/EPDM
Shaft Stainless steel ASTM 329
Mechanical face Carbon/SiC/EPDM
seals
Option
Other mechanical face seals materials.
Other O-ring materials.
180
Monitoring equipment
Separate motor protection is required.
63
185
5
AHV 25
6
AE 26
Material
Part Material
AE AEP
Pump body Cast iron EN-GJL-200 Bronze EN1982-CC491K
Seal housing Cast iron EN-GJL-200 Bronze EN1982-CC491K
Impeller Composit Noryl
O-rings Nitrile NBR/EPDM
Shaft Stainless steel ASTM 329
Mechanical face Carbon/SiC/EPDM
seals
Option
Other mechanical face seals materials.
Other O-ring materials.
AE 26 Bronze impeller.
Accessories
Connection 25
Base for mounting on column or console.
Product
Horizontal in-line centrifugal cast iron pump for hot and cold clean
liquids. The impeller is mounted directly on the shaft of the motor (no
separate couplings).
Denomination
AE Single pump in cast iron
AEP Single pump in bronze
Process data
Liquid temperature Maximum pressure
AE -15 °C till +100 °C 10 bar (PN 10)
AEP -15 °C till +120 °C 10 bar (PN 10)
Motor data
Enclosed motor with external ventilation and aluminium finned casing.
Frequency 50 Hz
Insulation class F (+155 °C)
Protection class IP 54
Painting Grey
Voltage 400/230 V
Ambient temperature max +45 °C
Monitoring equipment
Separate motor protection is required.
7
AE 26
8
AE 26
9
AE 33
Material
Part Material
AE
Pump body Cast iron EN-GJL-200
Seal housing Cast iron EN-GJL-200
Impeller Composit Noryl
O-rings Nitrile NBR/EPDM
Shaft Stainless steel ASTM 329
Mechanical face Carbon/SiC/EPDM
seals
Option
Other mechanical face seals materials.
Other O-ring materials.
AE 33 Bronze impeller.
Accessories
Connection 32
Base for mounting on column or console.
Product
Horizontal in-line centrifugal cast iron pump for hot and cold clean
liquids. The impeller is mounted directly on the shaft of the motor (no
separate couplings).
Denomination
AE Single pump in cast iron
Process data
Liquid temperature Maximum pressure
AE -15 °C till +100 °C 10 bar (PN 10)
Motor data
Enclosed motor with external ventilation and aluminium finned casing.
Frequency 50 Hz
Insulation class F (+155 °C)
Protection class IP 54
Painting Grey
Voltage 400/230 V
Ambient temperature max +45 °C
Monitoring equipment
Separate motor protection is required.
10
AE 33
11
AE 33
12
www.flygt.com
ITT Flygt, Tel: +46 8 475 60 00. Fax: +46 8 475 69 00
AHV/AE Vertical centrifugal pumps.50Hz.SV.SE.1105.© ITT Flygt AB 895945