Professional Documents
Culture Documents
1 2 3 4
Purchaser’s Requirements Bidder’s Offer
Priori Conformity Remarks
ty Yes No
Technical Specifications:
1. Overall Size Should not be less than following C
parameters.
±10% variance accepted
Length: 2100mm, Width: 950mm, Height: 500mm
Required Functions: C
a. Head rest adjustment (0deg – 85 deg) shall
2. be operated by smooth manual crank and the
Manual crank should have an over
turning protection mechanism.
Required Features: C
a. Collapsible Alloy Side Railings should
be available on both sides of the bed.
b. Wall protection rubber bumpers should
be available at all four corners.
c. Baggage holding tray should be
available under the head section.
3. d. At least two provisions required for IV
pole on head end of the bed with one
IV pole.
e. ABS Molded Detachable Head and Foot
Boards required
f. At least 120mm diameter TPR, non-
rusting, Swiveling, castors with
diagonal locking
Material Specifications: C
a. Main framework made of 1.5” x 2.5”
GI Rectangular tubes of 1.6mm thick.
b. Legs should be made of 2”x2” GI Box tubes of
4. 1.6mm thick.
c. 18G Perforated CRC/MS Sheet for
mattress base in two sections
d. All steel materials should be pretreated
and finished with epoxy powder coating.
Mattress: C
Non Foldable Mattress of 25mm soft density layer and
5. 75mm high density bottom layer should be supplied
with the bed. It shall be covered with a medical grade
cover.