This document provides technical specifications for a standard hospital bed. It lists 13 requirements for the bed, including its overall dimensions, materials used for the frame and bed top, inclusion of rubber stumps, warranty period, and need to provide documentation and samples. A bidder is to indicate conformity with each requirement and provide additional details such as make, model, country of origin in their response.
This document provides technical specifications for a standard hospital bed. It lists 13 requirements for the bed, including its overall dimensions, materials used for the frame and bed top, inclusion of rubber stumps, warranty period, and need to provide documentation and samples. A bidder is to indicate conformity with each requirement and provide additional details such as make, model, country of origin in their response.
This document provides technical specifications for a standard hospital bed. It lists 13 requirements for the bed, including its overall dimensions, materials used for the frame and bed top, inclusion of rubber stumps, warranty period, and need to provide documentation and samples. A bidder is to indicate conformity with each requirement and provide additional details such as make, model, country of origin in their response.
Technical Specifications for Hospital Bed , Standard
Purchaser’s Requirements Bidder’s Offer
Priori Conformity Remarks ty Yes No 1. Overall size- Approximately : Length: 75" , Width : C 32" Height : 25" inch 2. Main Frame made of 1" x 2" GI Rectangular tubes with C 1.6mm thickness 3. Head & Leg bow Frame work made of diameter 1.25" C with 1. 6mm thickness GI round tubes C 4. Bed top design with 18G(1.2mm) epoxy powder coating.(Including Holes for ventilation) 5. Bed should be four legs with rubber stumps (Should be C provide extra 2 rubber stumps for each bed) 6. All other pipe should be at least 1.2mm thickness GI C Pipe 7. All other materials should be pretreated and finished C with epoxy powder coating. 8. Holding provision for Mattress (Approximately C :Length: 72" , Width : 32" Height : 4" inch) General Conditions Full graphic illustrated original technical literature in C 9. English describing the product offered and detailing the specifications shall be supplied with the bid. A detailed proforma invoice of the product describing C the part sand accessories offered as requested by the specification together with their make, model,country 10. of origin, unit price, quantity, total price, ref.numbers of accessories and the period of warranty offered etc.shall be compulsorily provided with the bid. A list of users if any,in Sri Lanka of the product 11. offered shall be provided together with the bid. 12. If the model is not available in Government Hospitals C in Sri Lanka, a sample unit should be submitted for evaluation when requested. 13. The product shall be covered by a comprehensive C “Parts&Labour” warranty for the period of not less than 24 calendar months from the date of successful Installation & commissioning.
1DIVISION OF BIOMEDICAL ENGINERRING SERVICES
[12.11.2020] Make & Model : …………………………………………………… Country of Manufacture : …………………………………………………… Relevant catalogue & technical information attached Information given under “Bidder’s offer” is true & correct Bidder’s Name, Signature & Date : …………………………………………………… Company seal : ……………………………………………………