Professional Documents
Culture Documents
SOUND ON SOUND
NEWS FORUM MAGAZINE REVIEWS TECHNIQUES PEOPLE SOUND ADVICE MUSIC BUSINESS
In this article...
Introduction
An Analogue Journey
Tape Test
This Beat Is Techno Tron-ic
Groove Freedom
Things Going Down
Around The World
Double Or Quits
Mixing
Multiple Masters
On The Road
Todd Edwards On 'Fragments Of Time'
Mick Gazauski
Daft Punk spent four years and over a million dollars on their quest to revisit
the golden age of record production. Mick Guzauski and Peter Franco were
with them all the way.
Following one of the most ingenious, expensive and lengthy album marketing campaigns in
living memory, Daft Punk's Random Access Memories looks set to become the best-selling
album of the year. Indeed, its impact is so strong that there's already talk of it becoming one of
the best-selling albums of the decade. What's more, Random Access Memories sees Daft Punk
throwing down the gauntlet at the entire music industry, challenging almost all current
preconceptions about the way in which music is made and how to present and sell it. The
marketing campaign was one case in point, and it has also been noted that the album is an "all-
out war on the current single-song consumption model”, with iTunes streaming the entire Introducing Little Plate
album as one body of work before its release, and Daft Punk refusing to tour the album,
preferring to allow their studio handiwork to speak for itself.
Most of all, there's the way in which RAM was made and consequently sounds. Mainstream
music press reviewers rarely comment on production, but they have made an exception for
RAM, gushing "It's all rendered with an amazing level of detail, with no expense spared... RAM is
one of the best engineered records in many years,” and "It sounds like a million dollars.” The
latter comment was written before Daft Punk's Thomas Bangalter admitted in a post-album
release interview in Rolling Stone that he and his partner, Guy-Manuel de Homem-Christo, had,
in fact, spent more than that.
https://www.soundonsound.com/people/recording-random-access-memories-daft-punk 1/11
3/3/22, 9:46 PM Recording Random Access Memories | Daft Punk
Readers' Ads
VIEW ALL ADS CREATE FREE AD
SIGN UP TO
SOS NEWSLETTERS
Peter Franco (left) with Mick Guzauski during the recording of Random Access Memories at Henson Studios.
An Analogue Journey
Seven figures is, by any standard, a staggering amount of money to spend on the creation of an
album, and directly challenges the music industry's current cheese-paring business model. The
album was more than two years in the making, spread out over five years, and the result of this
gargantuan investment of money, time and effort is that Random Access Memories is, even
when heard in lo-res digital formats, arguably the best-sounding album of the 21st Century so
far. The vast majority of reviews have been ecstatic, and if the album's sales also continue to go
through the roof, it will be hard for a music industry to ignore the idea that spending serious
time and money on making an album sound fantastic and marketing it properly might actually,
after all, be a profitable proposition. Latest SOS Videos
If Random Access Memories turns out to have such an effect, it will be exactly what Thomas
Bangalter and Guy-Manuel de Homem-Christo had in mind. RAM is the manifestation of
a mind-bogglingly ambitious master plan, which they unveiled in bits and pieces in interviews
during the pre-release promotional campaign. Since their classic first two albums, Homework
(1997) and Discovery (2001), Daft Punk have been regarded as leading lights of electronic dance
music, yet they have waxed lyrical about the music of the '70s and early '80s, which they claim
represents "the zenith of a certain craftsmanship in sound recording” and criticised music
made with laptops, which "aren't really music instruments”. For Random Access Memories they
had, they announced, gone back to the recording methods of the '70s and '80s, which involved Your Questions Answered
not only a huge recording budget, but also the employment of great musicians from the era, 1 month 2 weeks ago.
and the use of high-end recording studios full of analogue equipment, all in order "to make
music that others might one day sample”.
Their project could easily have been dismissed as the folly of two French musicians about to
reach middle age, wanting to relive some of the excitement of their teenage years. However,
the album's first single, 'Get Lucky', featuring disco legend Nile Rogers on guitar and Neptunes
singer Pharrell Williams, instantly became the largest global hit of the year so far. Suddenly,
Daft Punk's ideas didn't appear so outlandish any more. Bangalter and de Homem-Christo
continued to make grand proclamations, openly criticising today's electronic music scene and
what they see as its "glorification of technology”, and stating that their reference points for RAM
were all-time legendary albums like the Eagles' Hotel California, Fleetwood Mac's Rumours, and Echo Back To Basics | Podcast
Pink Floyd's Dark Side Of The Moon. The black background on the cover of RAM, with 2 weeks 2 days ago.
handwriting in the top-left corner, is a clear reference to Michael Jackson's Thriller, while
opening track 'Give Life Back To Music' is a summary of the album's mission.
With nearly everyone in the music-making world confidently declaring that digital technology
has finally come of age, it surely would have been possible to realise the musical ideas on
Random Access Memories for a fraction of the price, even with a three-year gestation period.
Yet according to Daft Punk left-hand man Peter Franco, who was one of the album's engineers,
the only way to capture the sound and the feeling the band had in mind was to return to
https://www.soundonsound.com/people/recording-random-access-memories-daft-punk 2/11
3/3/22, 9:46 PM Recording Random Access Memories | Daft Punk
analogue gear and the working methods used
to make those classic '70s and early '80s Radiophonic Recording At Eve Studios
albums. 2 months 1 week ago.
Franco first worked with the French duo during
their epoch-making 2006-7 live tour, and
received a Best Electronic Album Grammy
Award for his engineering work on the
resulting live album, Alive 2007. He remarks:
"There is something about analogue that is so
much more lively and so much more appealing.
Even when you don't hear the difference it
seems that people feel it, and this is crucial,
because music is all about feeling and how it
changes your mood. Thomas and Guy-Man
have always been aware of the pros and cons
of digital. Even during the 2006 tour, we tried
hard to stay out of the digital domain because of the conversions. We knew that a lot of the
processes for live sound would have multiple conversion stages, with gear going from digital to
analogue and back to digital and back to analogue again. There could be three or four
conversions before you get to the speaker, and that always degraded the sound. So for this
album they went on a journey to understand what analogue does.”
Tape Test
When work on Random Access Memories began in 2008, there had already been some
indications that Daft Punk were looking to spread out from the approach of their first two
albums. Their pointedly titled third album, Human After All (2005), took just six weeks to make,
and their epoch-making 2006-7 concert tour has been credited with turning an entire
generation of American musicians on to electronic dance music. Bangalter and de Homem-
Christo clearly had a completely different direction in mind for their fourth album, which led
them to hire Henson Studio B in Los Angeles, formerly known as the legendary A&M studios,
and ask Franco to help them conduct some unusual experiments.
"We were doing lots of tests with analogue tape,” recalls Franco. "We did things like record into
Pro Tools and then transfer the material to tape, at various different levels, and then bring it
back into Pro Tools. We then compared this with recording the same material directly to tape
and transferring that to Pro Tools. We wanted to see what the different combinations did what
and how tape could get us certain sounds. One of our conclusions was that we liked the sound
we got when we went straight to tape and then to Pro Tools. We liked how tape changed the
shape of a sound. It's a cool journey to understand what analogue does. It wasn't just a matter
of trying to find the sounds of the past, but also of trying to achieve the best sound possible
today. We decided from the get-go that we wanted analogue to be a big part of this project,
and during the first recordings with live musicians, Thomas and Guy-Man also decided to stay
away from using plug-ins. I totally agreed with this and supported this idea, because plug-ins
try to mimic what analogue outboard does, and yet they're not on the same level yet. Digital
compression in particular is not appealing to us, and also, everyone is using the same plug-ins
today. We wanted to step out of that and use the stuff plug-ins are actually modelled after.
"Guy-Man and Thomas wanted to inspire the kids to pick up real instruments again, rather than
just press buttons!” comments Franco. "They had developed a sharper vision of what they
wanted during these two years, reworked some of the ideas we had recorded in 2008, and had
also written new material. We began with listening to and editing their demos, with help from
[Pro Tools engineer] Dan Lerner, to get them ready for overdubbing. We also wanted to
mentally prepare ourselves for this huge undertaking of tracking master session musicians at
Conway with a master engineer like Mick Guzauski. Guy-Man and Thomas also brought their
modular synth over from Paris. They built it out of various bits of custom pieces that were
made for them to their specifications by various different modular synth engineers, including
Modcan. Most of the modular stuff was recorded in Paris, but a small percentage of it was
recorded in LA. Some of the synth parts were recorded via DI, at other times they went via
guitar amplifiers. The modular synth is a large part of the sound of the album, almost all of the
synth sounds that you hear are made by it, and also many of the drum sounds. The synth and
drum sounds on 'Doing' It Right', for example, were created using the modular synth, which
also has the capability to store patterns. To mainly use this piece of gear was another very
deliberate decision that they made. It's almost a lost art form to create sounds on an analogue
synthesizer using LFOs and envelope filters and analogue delays and so on. I would look at
their signal paths and be totally amazed at the sounds they managed to create. For them, the
synths they had used for making the demos in 2008 were really simple and easy.”
Groove Freedom
The next stage took place at Conway Studio C
in Los Angeles, to which the team invited crack
session musicians including bassists Nathan
East and James Genus, drummers Omar Hakim
and John Robertson and keyboardist Chris
Caswell, who also responsible for many of the
album's orchestrations and arrangements. In
addition, Mick Guzauski came over from New
York to track all the live musicians recorded in
Los Angeles, and he later mixed the entire
album. Guzauski has worked on some of the
Another photo from the Henson sessions, with Mick
albums that were reference points for Daft Guzauski, Peter Franco and keyboardist Chris Caswell
Punk, by artists such as Earth, Wind & Fire, (back right).
Michael Jackson and Quincy Jones, as well as
with the likes of Eric Clapton, Burt Bacharach, BB King, Mariah Carey, Michael Bolton and the
Corrs. The New York engineer and mixer has close to 30 number one hit singles to his name,
and his ability to combine the silken touch of disco, soul and easy listening with the punch of
funk and rock & roll was very attractive for the company.
"Thomas and Guy-Man were very specific about the kind of sound they wanted,” recalls
Guzauski. "They told me that they wanted a vintage feel, very analogue, very smooth, but with
a modern sound. They also did not want me to use any plug-ins, and they wanted me to record
https://www.soundonsound.com/people/recording-random-access-memories-daft-punk 4/11
3/3/22, 9:46 PM Recording Random Access Memories | Daft Punk
to both analogue and digital. They came in with their song demos as Pro Tools sessions, and
some songs were more completely conceived and had programmed drums, bass and
keyboards, and in other cases it were more rough ideas with a click. They also brought their
own synths into the studio, with a modular synth and things like an Oberheim OB8 and a Juno
106 and quite a few old polyphonic analogue synths. At this stage, it was more a matter of
having the musicians play to different ideas and grooves, which Thomas and Guy-Man then
later edited and created songs structures from. They had very specific ideas about what the
musicians should play, so they would get the parts that they wanted, but at the same time they
allowed the musicians the freedom to improvise. We recorded a lot of stuff, and they then took
the best bits and created their masterpiece from that!”
"The initial demos often were sparse,” added Franco, "and could be just stereo or multitrack.
They were a matter of 'we have this vibe and chord progression here,' and then Guy-Man and
Thomas would explain what they wanted to hear. The musicians would have a listen and went
in and did their thing. Guy-Man and Thomas really wanted to capture great live performances,
so we strove to let the guys play the stuff the way they felt it, and we'd often just let the tape
roll, really allowing the musicians to run free and put their hearts and soul into these ideas. It
was an incredible experience to hear these musicians, who have played on many of the albums
that we love, do their thing. We'd then load the material that was recorded on analogue tape
into Pro Tools, which was running at 96k, where it sat side-by-side with the same digitally
recorded material, and then later on we spent a lot of time listening to everything and picking
the best bits and editing them and fitting them in. This happened every time after things were
added, whether the rhythm section, the orchestra, or the vocals. The ability to edit is the great
thing about Pro Tools, and this is where Dan Lerner and later David Channing really came into
their own. David is a wizard when it comes to editing large amounts of tracks and making them
groove together.”
"Yeah, we tried to get the sounds we wanted from the start,” seconded Guzauski, "mostly by
choosing the right microphones and mic positioning and mic pres. I used very little EQ while
tracking, and also during mixing. We did not want the album to sound EQ'ed. We wanted it to
sound as natural as possible. It's the old way of doing it, using EQ just to touch things up, and
not doing anything drastic. Our choices made subtle differences, with API mic pres sounding
nice and punchy and being great for the kick and snare, while Neve mic pres are a little bit
more airy and worked well for the overheads and drums. The other thing was that they in most
cases wanted to suppress the room sound. They wanted that '70s drum sound, recorded in
studios which were wall-to-wall carpeted and which were therefore very dead at the top end.
Today's studios aren't like that at all. We still got a little bit of room sound in, and this actually
added a nice sparkle to the sound and modernised it a little bit.
"For the drums, on the kick drum I had an AKG D112, a Sony C500,
a Neumann U47 FET, and a sub speaker — this wasn't really to get
a massive sound, but for control. Rather than drastically EQ'ing the
kick drum in the mix, I wanted to have different perspectives on it.
The D112 has a nice, solid, low bottom and a punchy mid-range.
The C500 has a very defined top and a fairly tight low end, and
picks up more of the beater. The 47 has more low end and less
attack, and I used the sub for when I wanted some really low
bottom end. So if I wanted more attack on the kick, I'd add more of
the C500, rather than use EQ. The kick drum was the only drum on
which I used so many mics. The snare had a Shure SM57 at the top
and an [AKC] C451 underneath it, the toms were Sennheiser 421s
and the overheads Schoeps CM5Us. As I mentioned, the room mics
didn't really play a part, but I did have Neumann U67s set up, just in
case. I used the Neve 88R remote mic pres on the toms and
https://www.soundonsound.com/people/recording-random-access-memories-daft-punk 5/11
3/3/22, 9:46 PM Recording Random Access Memories | Daft Punk
overheads. I recorded the bass guitar DI, via a Neve 1081 and Peter Franco first worked with
a [Teletronix] LA2A. Chris's keyboards were also DI'ed, though the Daft Punk on their hugely
influential 2006-7 world tour.
Fender Rhodes was miked with Neumann U87s, and for the piano
I placed DPA mics over the hammers, and a U67 back where the strings cross. During the mix,
the U67 was in the centre and the DPAs were panned left and right.
"The recording signals were split and then sent to both tape and Pro Tools. The analogue side
of the recording was a Studer A827 running 24-track ATR tape at 15ips, with +3 alignment and
Dolby SR, because we didn't want to have hiss. SR came in during the late '80s, and it
suppresses the really high transients a little bit, but it also fattens the bottom end, which were
the characteristics that we wanted. The digital went via Lynx Aurora A-D converters, which Guy-
Man and Thomas liked, and I was fine with that because they sound great. We also used an
Antelope digital clock. The analogue tape was striped with SMPTE, so it could run in sync with
Pro Tools, and after the recordings we'd transferred the tape material back into the same
session in Pro Tools, so we ended up with two identical versions of the same material in each
session. The first 23 tracks would have been directly recorded into Pro Tools, and right
underneath that were the exact same 23 tracks, but originating from the analogue tape. We
could not keep the analogue material in analogue, because Thomas and Guy-Man needed to be
able to extensively edit everything.”
"The Daft Punks guys spent a lot of time with these live tracks, creating what they wanted from
them and meticulously designing their songs,” explained Guzauski. "That's why so much time
passed between tracking and overdubbing and why the whole process took so long. After the
Conway sessions, we went over to Capitol Studios to record the orchestra, and a few months
later I went out to Los Angeles again, and recorded Paul Jackson's guitars and Greg Leisz's steel
guitar, and Chris did more keyboard overdubs, all at Henson. We later tracked more bass and
drums at Conway. I also recorded a percussionist called Quinn, who was incredible. He filled
out most of Conway Studio C, which is a fairly large room, probably between 25 and 30 feet
wide and at least 40 feet long, and with two really good-sized iso booths. He had home-made
drum kits with a unique sound, all sorts of stuff that was made by him and made incredible
sounds.
"We used both Studios A and B at Capitol to record the orchestra. There's a moveable wall, and
we had a 25-piece orchestra in Studio A, which I recorded with a Decca Tree with three
[Neumann] M50 mics, and spot mics on the instruments, and I also had percussion and timpani
in the same room. In Studio B, we had the brass section and the woodwind section. We'd
record the strings at the same time as either the brass or the woodwinds in the other studio,
and then the percussion in Studio A with whatever we hadn't recorded of the woodwinds and
brass in Studio B, so I had isolation between these four orchestral sections. I had three
different mics on the guitar cab, the SM57, Royer 121 and U87. We would listen to them and
then decide which ones we liked best. For guitar room microphones, we had Neumann 67s.
The mic pres I used on the guitars were the [Neve] 1073 and in some cases we took a DI. It
depended on the song. The acoustic guitar was recorded using a Schoeps CM5U going through
a 1073, and the steel guitar using a Neumann U87 going through a 1073 and a [Universal
Audio] 1176. Of the vocalists, I was only involved in recording Todd Edwards, for which we used
a Neumann U47, and Paul Williams, with a U67. Both mics went through a Neve 1073 and an
LA2A.”
Double Or Quits
https://www.soundonsound.com/people/recording-random-access-memories-daft-punk 6/11
3/3/22, 9:46 PM Recording Random Access Memories | Daft Punk
The dual analogue and digital signal paths meant that all the live tracks, which included
orchestra, were doubled in the Pro Tools sessions. When stacks of synth parts from Daft Punk
themselves were added, many of the sessions ballooned to a huge size. The epic eight-minute
track 'Touch', featuring Paul Williams, apparently consisted of 250 different parts; these had to
be edited and submixed in Pro Tools because the team were still using an HD3 rig, which only
allowed 96 tracks in 96kHz. As the songs neared completion, many choices were made about
what remained in the sessions and what didn't, and once choices had been made as to
whether to use the digital or analogue versions of certain parts, the doubled parts would be
removed from the session. "The analogue and digital versions were very similar but subtly
different,” explained Guzauski. "The digital was slightly crisper and the transients were better,
but in some cases we needed the more laid-back sound of the analogue. The important thing
was they had that choice for the entire project.”
Says Franco, "I would have to go back to my notes to work out how much of the analogue and
how much of the digital we used, because we did quite a bit of blind comparing between
analogue and digital, and so there are many instances where analogue was used without it
being marked in the final session. I know we picked the tape quite a bit, because it sounded so
much sweeter. At other times we wanted the punch of digital. The other thing that you have to
realise is that we used the UA 2192 [converters] when we did the tests in 2008. They are great,
but they're super-colourful, and don't have the same pristine presence as the Lynx Aurora 16s,
which we didn't start using until late 2010 — they didn't exist yet in 2008. When we listened to
the Auroras in 2010, we realised that they sounded better than anything we'd heard until then.
Plus, by the time of the final mix we were using Pro Tools HDX. So when using digital, one is
dealing with a technology that's still evolving, and very quickly.”
Mixing
Finally, in the summer of 2012, Guzauski
received a phone call saying that Bangalter and
de Homem-Christo considered the recordings
finished and were ready for him to mix the
album. Mixdown took place over a period of
two months at Conway Studio C, the same
place where Guzauski had recorded much of
the live-musician material. Guzauski recounts:
"They came in with the edited and finished Pro
Tools sessions, which were very well organised
and cleaned up. Normally I begin a mix by
doing some prep work, but in this case there
was hardly anything for me to do, as Dan
[Lerner] and Peter [Franco] had taken care of that side of things. I was pretty much just the
mixer!
"The process was for me to lay things out over the Neve 88R board, which has 72 inputs, so in
some cases this involved some submixing in the box to bring it down to 72 Pro Tools outputs or
less. I had an eight-channel Euphonix Artist controller for this, so I could use faders. I'd then
listen to the whole thing quickly, and then I'd listen to each track, not the whole way through,
just to get an idea of what was going on. This was quite straightforward because I'd engineered
a lot of what was there. Then I'd get a basic balance and build the mix from the bass, drums,
and keyboards, or bass, drums and guitars, whatever the main part of a song was, though
I don't normally spend a lot of time working on individual tracks. Mixing was nothing really
fancy, just balancing things with some nice ambience. Processing was purely used to make all
the overdubbed parts work together, not to make it brighter or louder. Thomas and Guy-Man
would regularly come in and comment, and I'd work on the mix some more. They had a Pro
Tools system set up in the other room, and they'd sometimes go in there to edit things and
make more changes.
"The mixing process took a while, because it was very detailed. It also was a leisurely process of
me setting things up, them listening to it, me tweaking the mix, them maybe doing edits and
making other changes in the adjacent room, and me again tweaking things. We had the whole
summer to do it! Also, while the Neve 88R has automation, I was only using analogue outboard,
and mix recalls would have been complicated. So we continued mixing each track until they
were happy, and then we moved on the next track. The only plug-ins that I used were the UA
de-esser, because you can be really precise with them, and gates, because nothing beats gates
that can look ahead! Other than that, it was all desk EQ and compression and outboard. The
https://www.soundonsound.com/people/recording-random-access-memories-daft-punk 7/11
3/3/22, 9:46 PM Recording Random Access Memories | Daft Punk
monitors I used when mixing were the Guzauski-Swist 3as, which I developed with Larry Swist.
We had also used them for tracking and Daft Punk liked them so much that they bought a pair.
It's a three-way system with tweeters and mid-range speakers that are mounted isolated from
the woofers, so you can really crank them up without transferring any of the low-frequency
vibrations to the other drivers, and this cuts distortion.”
"They are a big part of the technical aspect of the album,” adds Franco. "It is an amazing design,
and they sound amazing. It made listening to the musicians that much better because these
monitors really represent what they are doing.”
"I had parallel compression on the kick and snare,” Guzauski continues, "from either an LA2A or
an 1176, but didn't use much of it, and parallel compression on the drums as a whole using an
API 2500 and sometimes the Chandler EMI Zener. I seem to recall that I used the Zener in the
big section on the song 'Touch'. Other than that, I used some desk EQ and compression, and
some reverb, mostly from an EMT 140 plate, and occasionally the EMT 250, which was about as
modern as we got. I didn't use anything on the bass during the mix, other than add some desk
EQ in the mid-range to make it cut through. Very occasionally we'd need a little bit more
compression, from another LA2A or 1176 or the desk. I used the latter mostly for dynamic
control, whereas outboard compressors were more used as an effect. Yeah, it's a big bass
record! It's the way I heard it. They didn't ask for that, but they didn't say anything against it,
either!
"The guitars were, again, very simple. I didn't do much to them. With Nile, we just put him up,
and to make him fit better in the mix I'd add some 5k on the desk, and that was it. I don't think
we used any outboard on him. He simply had his sound and it was great the way it was. On 'Get
Lucky', his part was actually made up of two parts. I didn't do any big treatments on Paul
Jackson's guitar either. Because I'd recorded him with different mics, I could simply use another
mic if I wanted a different perspective. It was similar with the keyboards and synthesizers: most
of these were treated with EQ and compression on the console, just to make it fit in the mix.
I used the EMT 140 on the orchestra, but I'd also recorded it with the live chamber at Capitol for
natural ambience. In some cases I brought the orchestra out on a stereo bus and compressed
it slightly to make sure it kept its place in the track, without me having to mix it too loud. But in
the places where the orchestra can be heard by itself, there was very little processing.
"The processing on the guest vocalists, again, was very minimal. I always pay a lot of attention
to the vocals, and try to make sure that they sound natural and have really good diction, so
I usually add some top end to make sure they cut through. But I tend to cut around 3-4kHz,
very narrowly and depending on the vocals, and use the Dbx 902 de-esser so I can make the
vocal brighter without it being sibilant. As I mentioned, I also used the UAD de-esser. I also
usually had an LA2A on the vocals, and some EMT 140 reverb, with a Lexicon PCM42 or
Eventide H3000 delay. Regarding Daft Punk's vocoder parts, what they called the robot vocals,
they wanted them to sound as human and soulful as possible. This required quite a bit of
compression and desk EQ to keep the diction and make them understandable, and once we
had done that, we had to do some narrow-band cuts because some frequencies really stuck
out. So there were quite a few bands of parametric EQ in action on the GML EQ! The
compressor I used on them was the 1176.
"Once again, the whole thing about the processing was making sure all the parts had the
correct dynamic relationships between them. I think this is one of the things that makes this
record sound so good. Sometimes we ran things through a piece of gear without it actually
doing anything, just to get the sound of the transformers and amplifier. We spent some time
auditioning compressors, like several 1176s, LA2As and Neve 33609s, and used what individual
piece of gear sounded best to us. Daft Punk actually bought a vintage reconditioned 33609 and
it didn't quite sound the same, so they traded the one that they had spent a ton of money on
for the 33609 that they had at Conway, because everybody loved that one! This is one of the
fun things about analogue gear, every individual piece sounds a little different.”
Multiple Masters
Although relatively little processing was employed, the actual mixdown process for each song
was astonishingly elaborate. "We mixed back into the Pro Tools session,” explained Guzauski,
"but we also mixed to three half-inch analogue machines, with one running at 15ips and the
other two at 30ips. They were all Ampex 102 recorders, with the machine running at 15ips
having custom Aria electronics. For some songs we liked the 15ips master better, because it
had more saturation and the transients were more rounded off. But most of the album came
https://www.soundonsound.com/people/recording-random-access-memories-daft-punk 8/11
3/3/22, 9:46 PM Recording Random Access Memories | Daft Punk
from one of the 30ips masters, which both had stock Ampex electronics, but one had the Flux
head and the other had the regular head.
"The sounds of these three machines were very close, but Thomas is a real audiophile, and he
can hear the differences. He and Guy-Man were also very meticulous about the alignment of
these machines: a tech at Conway checked the playback every day and aligned the recording
for every reel of tape, just to make sure there were no differences in the tape stock. The techs
used the Audio Precision analyser to optimise bias and check the distortion, and so on. The
tape we used was again ATR, running at +3, and we ran several passes of most mixes at
different levels to get more or less saturation of the tape. All four mixdown formats were also
recorded on an eight-track Sonoma DSD recorder for listening and archival, because we were
a little bit concerned about the tape falling apart if we played it back too often. I love the sound
of DSD. If you listen to it critically, it sounds a little better than Pro Tools. It's not perfectly
transparent, but I love what it does, which is to give more definition in a very nice way, not
harsh at all.”
Throughout the entire mixing process, and also during mastering, Bangalter and de Homem-
Christo emphasised that they were not interested in loudness for its own sake, as Guzauski
confirms: "If it started to sound too loud, they wanted me to pull things back again. They
wanted a very specific sound, and in some cases I might have gone for a snare drum that was
a little bit too processed or punchy, and they would rein me in again. They had an unfaltering
vision of how they wanted this record to sound, and we experimented a lot to achieve that.
There was a lot of experimentation during the mixing. I really got into that, because it was fun
to mix and it is an incredibly pleasurable album to listen to. We had a couple of older solid-state
EQs on the stereo bus during mixdown, just because it sounded good, and it also went through
an Avalon EQ, which is very clean, and then a bus compressor, which in most cases was the
Neve 33609. We just used different pieces of gear to complement each song.”
On The Road
Mastering was done from the analogue tapes
by Bob Ludwig in Portland, Maine, while some
additional mastering work was also done in
Paris by Antoine Chabert at Translab. After all
this time and effort, not to mention a bank
balance drained of a million dollars, the Daft
Punk team were understandably precious
about their final master tapes, so Peter Franco,
with the help of Daft Punk crew member Sam
Cooper, offered to drive them from Los
Angeles to the East Coast, in a move worthy of
a Hollywood road movie. "It was the only way
to make sure that nobody else would touch Once the album had been mixed, the master tapes
these masters,” explains Franco, "and that they were sent to well-known mastering engineer Bob
Ludwig.
wouldn't go through radar or metal detectors
and so on. We had put so much energy into this project that we didn't want to hand it over to
a courier company. It would have been like handing over your own child. We were just really
happy to have come this far, through a process that had been great fun. There was no point at
which we felt lost or scared. Everything we were doing felt really right, and everybody was on
the same page. We were all the time in the studio with great people and great musicians, and it
always felt like a family setting, like going to a summer camp with a lot of really fun and
interesting people. It was a magical experience, and I think this filtered through in the end
product.”
The commitment of Daft Punk's team, the band's "singular vision” and a gargantuan investment
of time and money were all contributing factors in the creation of an extraordinary and hugely
successful album. It's especially impressive that it sounds so human after all that.
Mick Gazauski
Mick Guzauski lives 40 miles north of New York City, where he works in a private studio
called Barking Doctor Recording, featuring two control rooms, one with a Sony Oxford
console ("currently covered in blankets and a bunch of Euphonix controllers”), and the
other with a Yamaha DM2000 desk. He has a Pro Tools HDX system and although he has
some quality outboard by the likes of Eventide, GML, AMS and EMT, the vast majority of
his work is done 'in the box'. Will his experiences of the Random Access Memories
project prompt him to return to a more analogue way of working?
"I can't really go that route, because my consoles are digital. Stuff in the box is sounding
so good now, but most of all it's about the workflow. Budgets are quite small and
everybody wants changes all the time. I may be working on three or four different songs
on the same day, so instant recall is essential. Also, now that Pro Tools is 32-bit floating-
point, and some plug-ins also are 32-floating point, there no longer is that headroom
bottleneck as the tracks get fuller and louder. Pro Tools is starting to sound really good
now, as do the UAD plug-ins. But I still use outboard reverb, because I still haven't found
a good substitute for the Eventide 2016 or the AMS RMX16. And of course, I prefer to do
sessions in the way we did them with Daft Punk, if the budgets allow it.”
https://www.soundonsound.com/people/recording-random-access-memories-daft-punk 10/11
3/3/22, 9:46 PM Recording Random Access Memories | Daft Punk
All contents copyright © SOS Publications Group and/or its licensors, 1985-2022. All rights reserved.
The contents of this article are subject to worldwide copyright protection and reproduction in whole or part, whether mechanical or electronic, is expressly forbidden without the prior
written consent of the Publishers. Great care has been taken to ensure accuracy in the preparation of this article but neither Sound On Sound Limited nor the publishers can be held
responsible for its contents. The views expressed are those of the contributors and not necessarily those of the publishers.
https://www.soundonsound.com/people/recording-random-access-memories-daft-punk 11/11