Professional Documents
Culture Documents
SPECIFICATIONS
American Eagle Outfitters, Inc. strictly prohibits the manufacture of any product or the use of any raw material
from Uzbekistan, Turkmenistan, and the Xinjiang Uygur Autonomous Region in China. Yarn origins must be stated below.
Fabric Type : Panama Canvas
Fiber Content % : 100% Cotton
Branded / Specialty Fiber(s) Used (if any) :
BCI Credits available (if applicable)? Yes
If fibers used are recycled or branded, are Scope
SPINNING & Certificates and/or NOAs available?
-- select here --
WEAVING
Type of Yarn (warp x weft) : RSxRS
Yarn Size (Warp) : 16+16 Yarn Size (Weft) : 12+12
Yarn Content/Blend (Warp) : Cotton Yarn Content/Blend (Weft) : Cotton
Spinner Name/Country of Origin (Warp) : Bangladesh Spinner/COO (Weft) : Bangladesh
Finished Construction (warp x weft) : 16+16 x 12+12/104x60
Warp Dyeing Method (warp x weft) : Piece Dye - Continuous
Warp Dyestuff Type : Reactive
DYEING Printing Method : -- select here --
Printing Dyestuff Type : -- select here --
Weft Color & Dye Method : Natural/Undyed
Peached /
Mercerized Overdyed No Brushed Face
Other _____
Fabric Finishes
(Select Yes / No to all that apply) : Peached /
Heatset Coated Brushed Face
Other _____
Sanforized Napping Other _____ Other _____
FINISHING
Special Finishing (Internal or sub-contract?) :
Min. Cuttable Width (inches) : 56.0
Overall Width (inches) : 58.0
Weight Before Wash (oz) : 7.90
*Weight After Wash (oz) : 8.25
#
TESTING *Stretch % (warp x weft) :
AFTER 5HL *Recovery % (warp x weft) :
*Based on 5 home
laundering cycles *Growth % (warp x weft) :
@ 60ºC (140ºF) *Shrinkage Range (warp x weft) : Min: 0.00% Max: 3.00% x Min: -4.00% Max: 3.00%
Testing Determined by : As Per Internal Testing (5HL)
Mills are required to list actual test results, not the AEO minimum specs. The actual performance can be based on the mill's internal lab, external lab or other retail company's test report.
PHYSICAL
EVALUATION TEST METHOD ACTUAL PERFORMANCE
AATCC 20/20A /
FIBER CONTENT 100% Cotton
(ASTM D629)
ASTM D3776-09ae1
FABRIC WEIGHT BEFORE WASH (oz/sq yd) 7.9
ASTM D3776 Option C
FABRIC COUNT (Ends and Picks) 16+16 x 12+12/104x60
Option C
WORKMANSHIP
DEFECTS ASTM D3990
PERFORMANCE
DIMENSIONAL STABILITY TO WASHING
ISO 5077/6330 Warp: -4% ~ Weft: -5.5%
(perform after 5HL accordingly to ISO 5077/6330)
TENSILE STRENGTH (Warp and Fill)
BS EN ISO 13934-2
(perform after 5HL accordingly to ISO 5077/6330)
TEAR STRENGTH (Warp and Fill)
BS EN ISO 13937 - 1:2000
(perform after 5HL accordingly to ISO 5077/6330)
1. Special fabric characteristics (i.e. stretch, construction or finishing) which may impact spreading, cutting, sewing and/or garment finishing:
2. Chemicals or processes to avoid in wet processing this fabric & recommendations for wet process:
3. Shade range for this fabric (side to side shading issues, increase band width for shade tolerance, etc):
5. Special characteristics which will affect the garment wearer (i.e., color loss, crocking, etc....):
7. Comments:
Strenght parameters are under testing and shall share detauils later.
E
Season / Year developed for : BTS 2022
P L
XAM
Mill Fabric Reference # / Name : PD123456
Mill Shade or Dye Method Testing/Specs are determined by : Based On PFGD Fabric Testing
E
AEO Reference Name (for AEO use only): HOLLY
SPECIFICATIONS
American Eagle Outfitters, Inc. strictly prohibits the manufacture of any product or the use of any raw material
from Uzbekistan, Turkmenistan, and the Xinjiang Uygur Autonomous Region in China. Yarn origins must be stated below.
Fabric Type : Twill (3x1 Left Hand)
Fiber Content % : 75% Cotton, 5% Recycled Cotton, 18% Repreve Recylced Polyester, 2% Lycra
Branded / Specialty Fiber(s) Used (if any) : Unifi Repreve® & LYCRA Lycra®
BCI Credits available (if applicable)?
If fibers used are recycled or branded, are Scope
SPINNING & Certificates and/or NOAs available?
Scope Certificate + NOA available
WEAVING
Type of Yarn (warp x weft) : RSxRS
Yarn Size (Warp) : 20S Yarn Size (Weft) : 14S+16S+Lycra
Yarn Content/Blend (Warp) : 90% Cotton, 10% PIW Recylced Cotton Yarn Content/Blend (Weft) : 60% Cotton, 36% Polyester, 4% Lycra
Spinner Name/Country of Origin (Warp) : Texhong, China Spinner/COO (Weft) : Texhong, China
Finished Construction (warp x weft) : 105x66
Warp Dyeing Method (warp x weft) : PFGD
Warp Dyestuff Type : N/A - PFD
DYEING Printing Method : N/A - PFD
Printing Dyestuff Type : N/A - PFD
Weft Color & Dye Method : Natural/Undyed or PFD
Peached /
Mercerized Overdyed Yes Brushed Face
Other _____
Fabric Finishes
(Select Yes / No to all that apply) : Peached /
Heatset Coated Brushed Face
Other _____
Yes Sanforized Napping Other _____ Other _____
FINISHING
Special Finishing (Internal or sub-contract?) : Internal
Min. Cuttable Width (inches) : 56.0
Overall Width (inches) : 58.0
Weight Before Wash (oz) : 7.60
*Weight After Wash (oz) : 8.10
TESTING
#
*Stretch % (warp x weft) : 40.0%
AFTER 5HL *Recovery % (warp x weft) : 90.0%
*Based on 5 home
laundering cycles *Growth % (warp x weft) : 5.0%
@ 60ºC (140ºF) *Shrinkage Range (warp x weft) : Min: 3.00% Max: 5.00% x Min: 6.00% Max: 8.00%
Testing Determined by : As Per BV Tests (5HL)
Mills are required to list actual test results, not the AEO minimum specs. The actual performance can be based on the mill's internal lab, external lab or other retail company's test report.
PHYSICAL
EVALUATION TEST METHOD ACTUAL PERFORMANCE
AATCC 20/20A / 75% Cotton, 5% Recycled Cotton, 18% Repreve
FIBER CONTENT
(ASTM D629) Recylced Polyester, 2% Lycra
ASTM D3776-09ae1
FABRIC WEIGHT BEFORE WASH (oz/sq yd) 7.6
ASTM D3776 Option C
FABRIC COUNT (Ends and Picks) 105x66
Option C
WORKMANSHIP
E
DEFECTS ASTM D3990
P L
PERFORMANCE
DIMENSIONAL STABILITY TO WASHING
M
ISO 5077/6330 0
(perform after 5HL accordingly to ISO 5077/6330)
EXA
TENSILE STRENGTH (Warp and Fill)
BS EN ISO 13934-2 95 lbs x 80 lbs
(perform after 5HL accordingly to ISO 5077/6330)
TEAR STRENGTH (Warp and Fill)
BS EN ISO 13937 - 1:2000 10 lbs x 7 lbs
(perform after 5HL accordingly to ISO 5077/6330)
1. Special fabric characteristics (i.e. stretch, construction or finishing) which may impact spreading, cutting, sewing and/or garment finishing:
Fabric should be cut immediately
2. Chemicals or processes to avoid in wet processing this fabric & recommendations for wet process:
Heavy bleach may have adverse effect on strength
3. Shade range for this fabric (side to side shading issues, increase band width for shade tolerance, etc):
Shade range is DMCCMC1.5
5. Special characteristics which will affect the garment wearer (i.e., color loss, crocking, etc....):
Dark shades may result in pool wet crocking results.
7. Comments:
None