Professional Documents
Culture Documents
Spec.No./Ed. B-64494EN/02
2.Summary of Change
New, Add,
Applicable
Group Name/Outline Correct,
Date
Delete
The description of HIGH-SPEED PROGRAM
MANAGEMENT has been added.
・ NOTE is added to GENERAL WARNINGS AND
Basic CAUTIONS of chapter SAFETY Add Immediately
PRECAUTIONS.
・ CAUTION is added to 1.2 NOTES ON VARIOUS
KINDS OF DATA of chapter I.GENERAL.
Optional
Function
Unit
Maintenance
Parts
HIGH-SPEED PROGRAM MANAGEMENT is
Notice available in the following software.
30i/31i-LB:G3C1,G3D1,G4C1 / 07.0 or later
Correction
Another
Draw B-64494EN/02-01
No.
NOTE
Programs, parameters, and macro variables are stored in nonvolatile memory in
the CNC unit. Usually, they are retained even if the power is turned off.
Such data may be deleted inadvertently, however, or it may prove necessary to
delete all data from nonvolatile memory as part of error recovery.
To guard against the occurrence of the above, and assure quick restoration of
deleted data, backup all vital data, and keep the backup copy in a safe place.
The number of times to write machining programs to the non-volatile memory is
limited.
You must use "High-speed program management" when registration and the
deletion of the machining programs are frequently repeated in such case that the Added
machining programs are automatically downloaded from a personal computer at
each machining.
In "High-speed program management", the program is not saved to the
non-volatile memory at registration, modification, or deletion of programs.
Draw B-64494EN/02-01
No.
Draw B-64494EN/02-01
No.