Professional Documents
Culture Documents
TM050JVZG33-00
MODEL NO : TM050JVZG33
MODEL VERSION: 00
SPEC VERSION : 1.0
ISSUED DATE: 2017‐09‐01
■Preliminary Specification
□F inal Product Specification
Customer :
Approved by Notes
TIANMA Confirmed :
Prepared by Checked by Approved by
Lizhi_zhang
haiping_luo Guangkun_an
Yu_huang
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 1 of 27
Model No.TM050JVZG33-00
Table of Contents
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 2 of 27
Model No.TM050JVZG33-00
Record of Revision
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 3 of 27
Model No.TM050JVZG33-00
1.0 General Specifications
Feature Spec
Size 5 inch
Resolution 720×RGB×1280
Technology Type a‐Si SFT
Pixel Configuration Vertical Stripe
Display Spec.
Pixel pitch(mm) 0.08625×0.08625
Display Mode SFT
Surface Treatment HC
Viewing Direction ALL
LCM: 64.90×118.95×1.90
Outline Dimension (W x H x D) (mm)
CTP+LCM:73.59x137.98x3.05
LCD A.A(W x H)(mm) 62.10×110.40
Cover V.A(W x H)(mm) 62.70x111.00
CTP Touch Method Bare finger
Number of simultaneous touches 5
Mechanical Minimum Touch Area(mm) Φ7
Characteristics Finger Touch Pitch(mm) ≥13
CTP Structure GFF
2
I C Addressing of CTP 0x14
ZIF
Matching Connection Type
ZIF
LED Numbers 12 LEDS
Weight (g) TBD
Interface MIPI 4 Lanes
Electrical Color Depth 16.7M
Characteristics CTP: GT5668
Driver IC
TFT: ILI9881C
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 4 of 27
Model No.TM050JVZG33-00
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 5 of 27
Model No.TM050JVZG33-00
2.2 CTP Pin Assignment
(Matching ZIF)
Pin No: Symbol I/O Function Description Remark
1 GND P Ground
2 MESH P mesh
3 GND P Ground
4 VDD(3.3) P Voltage power
5 VDD(3.3) P Voltage power
2
6 SCL I I C SCL signal
7 SDA I/O I2C data input and output
8 INT I/O External interrupt to the host
9 RST I Reset Pin
10 GND P Ground
11 MESH P mesh
12 GND P Ground
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 6 of 27
Model No.TM050JVZG33-00
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 7 of 27
Model No.TM050JVZG33-00
4.0 Electrical Characteristics
4.0.1 LCD electrical characteristics
GND=0V,Ta=25℃
Item Symbol MIN TYP MAX Unit Remark
Analog operating
AVDD 2.7 2.8 2.9 V
voltage
Logic operating
VDDI 1.7 1.8 1.9 V
voltage
Input High Level VIH 0.7* VDDI - VDDI
Signal
Voltage Low Level VIL -0.3 - 0.3* VDDI
V
Output High Level VOH 0.8VDDI - VDDI
Voltage
Low Level VOL 0 - 0.2VDDI
Table 4.1 LCD module electrical characteristics
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 8 of 27
Model No.TM050JVZG33-00
4.0.4 Backlight Unit
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 9 of 27
Model No.TM050JVZG33-00
5.0 Timing Chart
5.0.1 Reset timing characteristics
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 10 of 27
Model No.TM050JVZG33-00
5.0.2 High Speed Mode
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 11 of 27
Model No.TM050JVZG33-00
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 12 of 27
Model No.TM050JVZG33-00
5.0.3 Low Speed Mode
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 13 of 27
Model No.TM050JVZG33-00
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 14 of 27
Model No.TM050JVZG33-00
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 15 of 27
Model No.TM050JVZG33-00
5.0.4 POWER ON/OFF SEQUENCE
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 16 of 27
Model No.TM050JVZG33-00
5.0.5 CTP Timing
5.0.5.1 IIC 时序
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 17 of 27
Model No.TM050JVZG33-00
6.0 Optical Characteristics
Test Conditions:
1. IF= 20 mA(one LED), and the ambient temperature is 25℃.
2. The test systems refer to Note 1 and Note 2.
Note 1: Definition of optical measurement system.
The optical characteristics should be measured in dark room. After 5 Minutes operation, the optical
properties are measured at the center point of the LCD screen. All input terminals LCD panel must
be ground when measuring the center area of the panel.
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 18 of 27
Model No.TM050JVZG33-00
“White state “: The state is that the LCD should drive by Vwhite.
“Black state”: The state is that the LCD should drive by Vblack.
Vwhite: To be determined Vblack: To be determined.
Note 4: Definition of Response time
The response time is defined as the LCD optical switching time interval between “White”
state and “Black” state. Rise time (TON) is the time between photo detector output intensity
changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output
intensity changed from 10% to 90%.
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 19 of 27
Model No.TM050JVZG33-00
Note 5: Definition of color chromaticity (CIE1931)
Color coordinates measured at center point of LCD.
Note 6: Definition of Luminance Uniformity
Active area is divided into 9 measuring areas (Refer Fig. 2). Every measuring point is
placed at the center of each measuring area.
Luminance Uniformity (U) = Lmin/ Lmax
L-------Active area length W----- Active area width
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 20 of 27
Model No.TM050JVZG33-00
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 21 of 27
Model No.TM050JVZG33-00
7.0 Environmental / Reliability Test
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 22 of 27
A B C D E F G H I J K L M N
No. LCM Symbol No. TP Symbol SYM REV DC/EC NUMBER DESCRIPTION DATE
1 1
1 LEDK 1 GND
YGT1-00 NEW ISSUE 2017.07.10
2 LEDA 2 MESH
3 GND 3 GND
4 TE 4 VDD(3.3) 1
2 (不含背胶及焊锡高度) 2
5 ID 5 VDD(3.3) 73.59±0.1(TP O.D) 3.05±0.2 3
6 RESET 6 SCL
62.70±0.15(TP V.A) (5.45) 1.00±0.1(TP)
7 GND 7 SDA
62.10(LCD A.A) (5.75) 0.70(LENS)
8 VDDI1.8V 8 INT
3 4.34±0.2 64.90±0.1(BL O.D) 3
8.40±0.1 P4.20X3=12.60±0.1 0.15(DST)
4-Ø1.50
Ø3.00
9 AVDD2.8V 9 RST 此区域TP去除sensor
(28.57) (7.75)
2-R0.30
10 D3P 10 GND 1.00±0.2(泡棉 )
只有一层玻璃加贴泡棉
11.79±0.2
(13.04)
(13.34)
8.89±0.1
(透明孔) (黑色半透孔) 1.90±0.15(LCM) (9.50)
11 MESH 11 MESH
12 D3N 12 GND
8.0 Mechanical Drawing
4 4
13 D2P
14 D2N 4.99"TFT 遮光胶带
(5.75)
(6.50)
15 MESH 720(RGB)X1280
(2.00)
16 GND xxxxxxxxxx
5 5
17 CLKP
18 CLKN
19 GND
15.78±0.5
22 GND 25
T=0.2±0.03
110.40(LCD A.A)
1
137.98±0.1(TP O.D)
111.00±0.15(TP V.A)
23 D0P A
118.95±0.1(BL O.D)
T=0.3±0.03 屏蔽膜 12
24 D0N 1
7 B 7
25 GND 3.00±0.3 元件区+
4.00±0.3 1.32 MAX(TP) 绝缘胶带
52.40±0.5
元件区+
39.75±0.5
AK
1.00 MAX(LCM)
8 镜面银 绝缘胶带 8
8.0.1 LCM +CTP Mechanical Drawing
15.97±0.5
8 焊锡高度T=0.4mm
(1.74)
2.70
9 7 9
9
0.08625
0.02875
0.60±0.1
0.30±0.1
+0.04
0.30±0.03
0.60±0.03
-0.03
0.30 +0.04
W=0.35±0.05
0.50±0.1
6.50±0.1
P0.50X11=5.50±0.1
10 10
R G B
0.08625
LED-A LED-K
5 6
7.20±0.1
7.80±0.1
11 DOTS DETAIL
11
CIRCUIT DIAGRAM
0.30±0.1
0.10
4 DETAIL:B (If=40mA / Vf=19.2V TYP)
1.00±0.1
6.60±0.1
12 1.10±0.1 SCALE 4:1 12
NOTES:
2.10±0.1
1.LCM DISPLAY TYPE: a-si SFT ; CTP : GFF
2.25±0.1 LEVEL General Tolerance(±) CONTROL DIMENSION: 2D Rev.
2.LCM DRIVE IC: ILI9881C ; CTP DRIVE IC: GT5668
3.VIEW DIRECTION: ALL 2.50±0.3 DIM. 1 2 3 REFERENCE DIMENSION: ( ) 3D Rev.
SELECT
13 4.GENERAL TOLERANCE: LEVEL 3 0~5 ±0.05 ±0.10 ±0.10 13
DETAIL:A LEVEL APPROVED: Wu MeiLing 2017.07.10 PRODUCT NUMBER: TM050JVZG33-00 3rd ANGLE
5.OPERATION TEMPERATURE: -20°C~+70°C 5~15 ±0.05 ±0.10 ±0.15
STORAGE TEMPERATURE: -30°C~+80°C SCALE 4:1 15~50 ±0.05 ±0.10 ±0.20 EE CHECKED: Huang Yu 2017.07.10 PART NAME: LCM UNIT mm
6.LCM MATCHED CONNECTOR: FH26-25S-0.3SHW
50~250 ±0.10 ±0.20 ±0.30 3 Li QiongFeng DRAWING NUMBER: SCALE
7.REQUIREMENT ON ENVIRONMENT PRO TECTION: Q/S0002 ME CHECKED: 2017.07.10 YGT1-00 1:1
250~600 ±0.15 ±0.30 ±0.50
14 8.GENERAL TOLERANCE: ±0.2 METERIAL NUMBER: 14
ANGLE GENERAL TOLERANCE -° DESIGNED: Zhang LiZhi 2017.07.10 PAGE 1/1
A B C D E F G H I J K L M N
Model No.TM050JVZG33-00
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
Page 23 of 27
A B C D E F G H I J K L M N
SYM REV DC/EC NUMBER DESCRIPTION DATE
1 1
YTP1-00 NEW ISSUE 2016.12.20
2 YTP1-02 二供 南波 2017.04.01
2 1
2
73.59±0.05(TP O.D) 7
3
2 1.00±0.1
8.0.2 CTP
0.30(SENSOR)
0.70±0.05(LENS)
4-Ø1.50±0.1
8.40±0.1 P4.20X3=12.60±0.1 4.15±0.1 65.30±0.1(LCM 对位线)
Ø3.00±0.1
3 6
3
2-R0.30
32.92 7.75
5.29
0.20
13.04±0.1
11.59±0.1
8.89±0.1
(透明孔) 1.00±0.1( 黑色泡棉单面胶)
5.75
(10±5% 黑色半透
灯不亮时不可见)
正面保护膜
4 4
背面保护膜
此区域TP去除sensor 撕离把手
4 5 只有一层玻璃加贴泡棉
5 5
内保护膜
黑色丝印
6 6
137.58(SENSOR)
137.98±0.05(TP O.D)
0.15±0.15
119.35±0.1(LCM 对位线)
7 7
点胶区域
白色丝印线
镜面银
Mechanical Drawing
T=0.2mm
8 8
屏蔽膜 +TESA8854 弯折区
绝缘胶带 1.32 MAX
15um+0.1mm
SUS304 + 导电双面胶
2-R3.95
元件区(点胶)
A
38.69±0.3
T=0.2mm+0.05mm
9 1 屏蔽膜 屏蔽膜 +TESA8854 9
12 8
15um+0.1mm No. Symbol
0.30±0.03 0.20
0.20 1 GND
3.00±0.3
15.97±0.3 2 MESH
4.00±0.3
10 35.54 3 GND 10
85.22±0.3 4 VDD(3.3)
10
5 VDD(3.3)
6 SCL
11
11 9 7 SDA 11
8 INT
9 RST
10 GND
6.50±0.05
0.50±0.07
3.00±0.3
W=0.35±0.05
P0.50X11=5.50±0.05
12 NOTES: 11 MESH 12
12 GND
1 .结构 : GFF
CONTROL DIMENSION: 2D Rev
2. IC 型号 : GT5668
3 .盖板材质 : 旭硝子二代;表面硬度 ≥7H, 翘曲度 ≤0.3mm ; CS>450Mpa,DOL≥10um REFERENCE DIMENSION: ( ) 3D Rev
13 4 .透过率 : ≥85%; 雾度 :≤3% PRODUCT NUMBER: TM050JVZG26-00 3rd ANGLE
13
APPROVED: 吴美玲 2017.04.01
5 .工作温度 : -20°C~+70°C
DETAIL: A PART NAME: CTP UNIT mm
存储温度 : -30°C~+80°C CHECKED: 李琼凤 2017.04.01
SCALE 4:1 DRAWING NUMBER: YTP1-02 SCALE 1:1
6 .未注公差: ±0.2mm
14 7 .环保要求: 产品环保执行 Q/S0002+HF ( 环境物质管理基准 ) DESIGNED: 陈惠轩 2017.04.01 METERIAL NUMBER: 1602048892 PAGE 1/1
14
A B C D E F G H I J K L M N
Model No.TM050JVZG33-00
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
Page 24 of 27
Model No.TM050JVZG33-00
9.0 Packing Drawing
9.0.1 Packaging Material List
No Item Model (Materiel) Dimensions(mm) Unit Weight(Kg) Quantity Remark
1 LCM module TM050JVZG33-00 73.59×137.98×3.05 TBD 84
2 Tray TM050JVZG33-00 YBZ1-00 356x256x15.0 TBD 24
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 25 of 27
Model No.TM050JVZG33-00
10 .0 Precautions for Use of LCD Modules
10.0.1 Handling Precautions
The display panel is made of glass. Do not subject it to a mechanical shock by dropping
it from a high place, etc.
10.0.2 If the display panel is damaged and the liquid crystal substance inside it leaks out, be
sure not to get any in your mouth, if the substance comes into contact with your skin or
clothes, promptly wash it off using soap and water.
10.03 Do not apply excessive force to the display surface or the adjoining areas since this
may cause the color tone to vary.
10.0.4 The polarizer covering the display surface of the LCD module is soft and easily
scratched. Handle this polarizer carefully.
10.0.5 If the display surface is contaMinated, breathe on the surface and gently wipe it with a
soft dry cloth. If still not completely clear, moisten cloth with one of the following
solvents:
- Isopropyl alcohol
- Ethyl alcohol
Solvents other than those mentioned above may damage the polarizer. Especially, do
not use the following:
- Water
- Ketone
- Aromatic solvents
10.0.6 Do not attempt to disassemble the LCD Module.
10.0.7 If the logic circuit power is off, do not apply the input signals.
10.0.8 To prevent destruction of the elements by static electricity, be careful to maintain an
optimum work environment.
10.0.9 Be sure to ground the body when handling the LCD Modules.
10.0.10 Tools required for assembly, such as soldering irons, must be properly ground.
10.0.11 To reduce the amount of static electricity generated, do not conduct assembly and
other work under dry conditions.
10.0.12 The LCD Module is coated with a film to protect the display surface. Be care when
peeling off this protective film since static electricity may be generated.
10.0.13 Storage precautions
10.0.14 When storing the LCD modules, avoid exposure to direct sunlight or to the light of
fluorescent lamps.
10.0.15 The LCD modules should be stored under the storage temperature range. If the LCD
modules will be stored for a long time, the recommend condition is:
Temperature : 0℃ ~ 40℃ Relatively humidity: ≤80%
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 26 of 27
Model No.TM050JVZG33-00
10.0.16 The LCD modules should be stored in the room without acid, alkali and harmful gas.
10.0.17 Transportation Precautions
10.0.18 The LCD modules should be no falling and violent shocking during transportation, and
also should avoid excessive press, water, damp and sunshine.
The information contained herein is the exclusive property of TIANMA MICRO-ELECTRONICS Corporation
and shall not be distributed, reproduced, or disclosed in whole or in part without prior written permission of
TIANMA MICRO-ELECTRONICS Corporation.
Page 27 of 27