Professional Documents
Culture Documents
Timken Part Number X32205M - Y32205M, Tapered Roller Bearings - TS (Tapered Single) Metric
Timken Part Number X32205M - Y32205M, Tapered Roller Bearings - TS (Tapered Single) Metric
Timken Part Number X32205M - Y32205M, Tapered Roller Bearings - TS (Tapered Single)
Metric
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts:
the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Speci cations | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Speci cations
Series 32205M
0.20 Kg
Bearing Weight
0.4 lb
Dimensions
11/7/2019 | Page 2 of 4
25.000 mm
d - Bore
0.9843 in
52.000 mm
D - Cup Outer Diameter
2.0472 in
18 mm
B - Cone Width
0.7087 in
16 mm
C - Cup Width
0.6299 in
19.250 mm
T - Bearing Width
0.7579 in
-5.3 mm
a - Effective Center Location3
-0.21 in
11/7/2019 | Page 3 of 4
42100 N
C0 - Static Radial Rating
9470 lbf
Factors
K - Factor7 1.62
instruction on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for
instruction on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
16.000
1.8
18.000
52.000
25.000
46.5
31.0
34.0
49.5
-5.3
METRIC UNITS
ISO Factor - e 0.36
ISO Factor - Y 1.67 X32205M - Y32205M
Bearing Weight 0.2 kg TS BEARING ASSEMBLY
Number of Rollers Per Row 15
Effective Center Location -5.3 mm
K Factor 1.62
Dynamic Radial Rating - C90 12900 N
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 7950 N
NORTH CANTON, OHIO USA Static Radial Rating - C0 42100 N
Dynamic Radial Rating - C1 49800 N
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY