Professional Documents
Culture Documents
Ducts
Dimensions
The ducts are suited for greater dimensions of the round
components to make their installation easier. When
completely stretched, the ducts are 3.5 or 10m long.
Labelling
ALNOR products are furnished with the
construction industry’s B sign and product
codes according to their technical
specifications contained in this catalogue.
Benefits of Use
Due to their flexibility, the ducts can be deployed in hardly
accessible places of the building and when it is difficult to
plan how to connect boxes to the suspended ceiling. With
10-metre sections you can save time, as you do not have to
work with short sections, and 120cm large cartons make Flexible ventilation ducts ALUDUCT AD-L, ALUDUCT AD-3,
their handling and storage quite easy. With its 25mm thick SONODUCT AD-L, SONODUCT PE AD-L and IZODUCT AD-3 have
mineral wool insulation and a perforated tube inside, the hygiene certificate HK/B/0100/01/2009
duct also serves as a silencer.
Flexible Ducts
Dimensions
d1
The flexible round ducts are a result of spiralling profiled alu- 80 83 3000 0,34
minium tape which is joined using a triple overlap lock.
85 88 3000 0,36
Packaging: 3rm sections, squeezed to 1000-1300mm. 90 93 3000 0,38
100 103 3000 0,42
Flexibility rate:Minimum duct bend radius is one and half
diameters or so (R=1.5D) 110 113 3000 0,47
115 118 3000 0,49
Temperature range: − 30°C to +250°C
Maximum humidity: 95 % 120 123 3000 0,51
125 128 3000 0,53
Allowable static pressure: 2000 Pa
130 133 3000 0,55
Allowable static negative pressure: 1000 Pa
133 136 3000 0,57
Flow rates: 135 138 3000 0,58
Recommended operating speed: do 7 m/s
140 143 3000 0,59
Maximum flow rate: do 25 m/s
150 154 3000 0,63
Fire resistance: non-combustible
160 164 3000 0,68
Example identification 180 184 3000 0,76
Product code: AF-AL - aaa
200 204 3000 0,90
type 250 254 3000 1,13
Æd1
300 304 3000 1,35
315 319 3000 1,42
355 359 3000 1,60
400 406 3000 1,80
450 456 3000 2,14
500 506 3000 2,25
Dimensions
d1
The flexible round ducts are a result of spiralling profiled alu- 80 83 3000
minium tape which is joined using a triple overlap lock.
85 88 3000
Packaging: 3rm sections 90 93 3000
100 103 3000
Flexibility rate: Minimum duct bend radius is one and half
diameters or so (R=2,5 D) 110 113 3000
115 118 3000
Temperature range: −30°C to +500°C
120 123 3000
Maximum humidity: 95%
125 128 3000
Allowable static pressure: 2000 Pa 130 133 3000
133 136 3000
Allowable static negative pressure: 1000 Pa
135 138 3000
Flow rates:
140 143 3000
Recommended operating speed: to 7 m/s
Maximum flow rate: to 25 m/s 150 154 3000
160 164 3000
Fire resistance: non-combustible
Example identification
Product code: AF-SN - aaa
type
Æd1
Flexible Ducts
Technical Data
Pressure drop chart for straight sections
Sp
e ed
du
c ts
m/
Losses depending on wire resistance
s
ter
me
dia
Rw
Volume V w m3/h
Technical Data
Pressure drop chart for sections angled 90° and 45°
flexion - 90° flexion - 45°
Noise level in ALNOR®FLEX i STAL®FLEX ducts with standard diameters of 100mm to 300mm
Speed ducts
Noise level in dB
noise level dB
Speed ducts
frequency in Hz frequency in Hz
Figure 1: Noise level Figure 1: Noise level
in ALNOR®FLEX and STAL®FLEX ducts in ALNOR®FLEX and STAL®FLEX ducts
straight section section angled at 90° r = d
Flexible Ducts
Dimensions
Description
80 82,0 2500 + 1,5
The ALUDUCT flexible duct is made of aluminium-polyester
casing, reinforced with spirally wound steel wire. 100 102,0 2500 + 1,5
125 127,0 2500 + 1,5
Packaging: 10rm sections, squeezed to 600mm, packed
into cardboard boxes. 140 140,0 2500 + 1,5
150 152,0 2500 + 1,5
Flexibility rate (winding diameter): Relative to a specific
diameter, i.e. approx. 0.6 x diameter in mm. 160 160,0 2500 + 2,0
180 180,0 2500 + 2,0
Temperature range: − 20°C to + 140°C
200 203,0 2500 + 2,0
Allowable negative pressure: Depending on duct posi-
225 229,0 2500 + 2,0
tion. For straight sections, you can assume 1/3 of transmit-
ted pressure per diameter. 250 254,0 2500 + 3,0
280 280,0 2500 + 3,0
Fire classification - E.g.-1364.3/A/06/MŻ
300 305,0 2500 + 3,0
The product is also available in GREEN series characterized 315 315,0 2500 + 3,0
by low emissions of volatile organic compounds.
355 355,0 2500 + 3,0
Code: ALAD-G-L
Name: ALUDUCT-G AD-L 400 406,0 2500 + 4,0
450 457,0 2500 + 4,0
500 508,0 2500 + 4,0
560 568,0 2500 + 4,0
630 638,0 2500 + 4,0
710 718,0 2500 + 4,0
800 810,0 2500 + 4,0
Example identification
Product code: ALAD-L - aaa
type
Æd1
Dimensions
Description
80 82,0 3000 + 1,5
The ALUDUCT flexible duct is made of aluminium casing,
reinforced with spirally wound steel wire. 100 102,0 3000 + 1,5
125 127,0 3000 + 1,5
Packaging: 10rm sections, squeezed to 800mm, packed
into cardboard boxes. 140 140,0 3000 + 1,5
150 152,0 3000 + 1,5
Flexibility rate (winding diameter): Relative to a specific
diameter, i.e. approx. 0.6 x diameter in mm. 160 160,0 3000 + 2,0
180 180,0 3000 + 2,0
Temperature range: − 30°C to + 250°C
200 203,0 3000 + 2,0
Allowable negative pressure: Depending on duct posi- 225 229,0 3000 + 2,0
tion. For straight sections, you can assume 1/3 of transmit-
250 254,0 3000 + 3,0
ted pressure per diameter.
280 280,0 3000 + 3,0
The product is also available in GREEN series characterized
300 305,0 3000 + 3,0
by low emissions of volatile organic compounds.
Code: ALAD-G-3 315 315,0 3000 + 3,0
Name: ALUDUCT-G AD-3 355 355,0 3000 + 3,0
400 406,0 3000 + 4,0
450 457,0 3000 + 4,0
500 508,0 3000 + 4,0
560 568,0 2500 + 4,0
630 638,0 2500 + 4,0
710 718,0 2500 + 4,0
800 810,0 2500 + 4,0
Example identification
Product code: ALAD-3 - aaa
type
Æd1
Flexible Ducts
Technical Data
Pressure drop chart for straight sections
Sp
e
Losses depending on wire resistance R w Pa/m
ed
du
c ts
m/
s
Volume V w m3/h
Dimensions
Æd1
Description
[mm] out [mm] pressure [Pa] [mm]
Example identification
Product code: ALAD-HY-3 - aaa
type
Æd1
Flexible Ducts
Dimensions
Æd
Æd 1 Æd allowable tolerance
Description
[mm] out [mm] pressure [Pa] [mm]
Example identification
Product code: ALAD-HY-L - aaa
type
Æd1
Dimensions
d1
Flexible duct, noise and heat insulated, with additionally per- 80 82,0 2000 + 1,5
forated ALUDUCT AD-L insert. Insulated with a 25mm thick
mineral wool, covered with aluminium-polyester film casing. 100 102,0 2000 + 1,5
125 127,0 2000 + 1,5
Packaging: 10rm sections, squeezed to 1200mm, packed
into cardboard boxes. 140 140,0 2000 + 1,5
150 152,0 2000 + 1,5
Flexibility rate (winding diameter): Relative to a specific
diameter, i.e. approx. 0.75 x diameter 160 160,0 2000 + 2,0
180 180,0 2000 + 2,0
Temperature range: − 30°C to + 140°C
200 203,0 2000 + 2,0
Allowable negative pressure: Depending on duct position. 225 229,0 2000 + 2,0
For straight sections, you can assume 1/3 of transmitted
pressure per diameter. 250 254,0 2000 + 3,0
280 280,0 2000 + 3,0
Noise insulation: See the attached diagram. 300 305,0 2000 + 3,0
315 315,0 2000 + 3,0
The duct is also available without perforation IZODUCT
AD-L ALID-L 355 355,0 2000 + 3,0
400 406,0 2000 + 3,0
Fire classification - E.g.-1258.2/A/07/MŻ
450 457,0 2000 + 3,0
The product is also available in GREEN series characterized 500 508,0 2000 + 3,0
by low emissions of volatile organic compounds.
Code: ALAD-G-L 560 568,0 2500 + 4,0
Name: ALUDUCT-G AD-L 630 638,0 2500 + 4,0
Code: ALID-G-L
Name: IZODUCT-G AD-L 710 718,0 2500 + 4,0
800 810,0 2500 + 4,0
Example identification
Product code: ALSD-L - aaa
type
Æd1
Flexible Ducts
Dimensions
d1
Dimensions
d1
Description
80 82,0 2000 + 1,5
Flexible duct, noise and heat insulated, with additionally per-
forated ALUDUCT AD-3 insert. Insulated with a 25mm thick 100 102,0 2000 + 1,5
mineral wool, covered with aluminium-polyester film casing. 125 127,0 2000 + 1,5
Packaging: 10rm sections, squeezed to 1200mm, packed 140 140,0 2000 + 1,5
into cardboard boxes, and 5rm sections, squeezed to 150 152,0 2000 + 1,5
600mm, packed into cardboard boxes.
160 160,0 2000 + 2,0
Flexibility rate (winding diameter): Relative to a specific 180 180,0 2000 + 2,0
diameter, i.e. approx. 0.80 x diameter in mm..
200 203,0 2000 + 2,0
Temperature range: − 30°C to + 250°C 225 229,0 2000 + 2,0
250 254,0 2000 + 3,0
Allowable negative pressure: Depending on duct position.
For straight sections, you can assume 1/3 of transmitted 280 280,0 2000 + 3,0
pressure per diameter.
300 305,0 2000 + 3,0
Noise insulation: See the attached diagram. 315 315,0 2000 + 3,0
355 355,0 2000 + 3,0
The duct is also available without perforation. IZODUCT
AD-3 ALID-3 400 406,0 2000 + 3,0
450 457,0 2000 + 3,0
Fire classification - E.g.-1364.2/A/06/MŻ
500 508,0 2000 + 3,0
The product is also available in GREEN series characterized
560 568,0 2500 + 4,0
by low emissions of volatile organic compounds.
Code: ALAD-G-3 630 638,0 2500 + 4,0
Name: ALUDUCT-G AD-3
710 718,0 2500 + 4,0
Code: ALID-G-3
Name: IZODUCT-G AD-3 800 810,0 2500 + 4,0
Example identification
Product code: ALSD-3 - aaa
type
Æd1
Flexible Ducts
Dimensions
d1
Example identification
Product code: ALSDL-L - aaa
type
Æd1
Dimensions
d1
Flexible Ducts
Technical Data
Noise attenuation curves
The charts show noise levels for noise and heat insulated SONODUCT and SONOLIGHT ducts, depending on the section length:
500mm, 1000mm and 1500mm at a noise insulation thickness of approx. 25mm.
Noise level dB
Noise level dB
Frequency en Frequency en
Frequency en
Technical Data
Flow resistance chart for IZODUCT/IZOLIGHT ducts
[Pa/m]
• •[m]
••••••
100
80
60
50
40 22
80
30 20
0
10
18
5
12
16
20
0
14
18
0
20
12
10 25
0
8 10
5
31
5
9
35
6
0
40
5 8
0
4 7
50
3 6
2 f lo 5
w
rat
e[
m/
s]
4
1
m]
[m
3
ter
me
dia
Flexible Ducts
Dimensions
Æd
Dimensions
d1
Description
Flexible duct thermally insulated with 25 or 50 mm thick mine- 80 82,0 3000 + 1,5
ral wool. Its internal jacket is made of 30 µm thick double-layer 100 102,0 3000 + 1,5
polyester. External jacket is made of 30 µm thick double-layer
metalized polyester. Additionally between the internal jacket 125 127,0 3000 + 1,5
and the insulation there is steamproof foil. External jacket is 140 140,0 3000 + 1,5
reinforced with spirally coiled steel spring wire.
150 152,0 3000 + 1,5
Packing: 10 m long sections are packed in carton boxes. 160 160,0 3000 + 2,0
Flexible Ducts
Dimensions
Æd
Æd Æd allowable tolerance
Description
nom [mm] out [mm] pressure [Pa] [mm]
Example identification
Product code: ALID-HY-3 - aaa
type
Æd1
Dimensions
Æd
Æd Æd allowable tolerance
Description
nom [mm] out [mm] pressure [Pa] [mm]
Example identification
Product code: ALID-HY-L - aaa
type
Æd1
PVC-A
Download AlnorCAM
Buy via B2B
Flexible Ducts
Dimensions
Æd
Æd Æd dozwolone tolerancja
80
zew [mm]
82,0
ciśnienie [Pa]
3000
[mm]
+ 1,5
COMBIAFS is produced from multi aluminium layer covered
100 102,0 3000 + 1,5
with a nonflammable and airtight PVC jacket, made of a 45
micron thickness. COMBIAFS is reinforced with high tension 125 127,0 3000 + 1,5
steel spring wire.
150 152,0 3000 + 1,5
Produced for discharging welding fumes and dense chemi-
cal gases where high mechanical resistance is required. 160 160,0 3000 + 2,0
COM-F flexible air ducts are recommended for ventilation,
180 185,0 3000 + 2,0
air-conditioning and heating systems.
200 203,0 3000 + 2,0
225 229,0 3000 + 2,0
Packing: 10rm sections, packed into cardboard boxes.
250 254,0 3000 + 3,0
Flexibility rate (winding diameter): Relative to a specific
300 305,0 3000 + 3,0
diameter, i.e. approx. 0.6 x diameter in mm.
315 315,0 3000 + 3,0
Temperature range: − 30°C + 150°C
355 356,0 3000 + 3,0
Allowable negative pressure: Depending on duct posi- 400 406,0 3000 + 4,0
tion. For straight sections, you can assume 1/3 of transmit-
450 457,0 3000 + 4,0
ted pressure per diameter.
500 508,0 3000 + 4,0
Example identification
560 568,0 3000 + 4,0
Product code: PVC-A - aaa
630 638,0 3000 + 4,0
type
710 718,0 3000 + 4,0
Æd1
800 810,0 3000 + 4,0
Dimensions
Æd
Example identification
Product code: COM-F - aaa
type
Æd1
Flexible Ducts
Dimensions
Æd
Dimensions
d1
d1 d out
Description nom [mm] [mm]
80 82,0
SLVD flexible duct sleeve insulated with 25 mm or 50 mm
glass mineral wool, coated with aluminum and polyester 100 102,0
sleeve. SLVD sleeve is used for insulating round or oval ducts. 125 127,0
SLVD sleeves are highly wear-resistant, do not transmit UV
radiation and are resistant to chemicals. 140 140,0
150 152,0
Packaging: 5rm sections in foil-wrapped rolls, packed in a
cardboard box. 160 160,0
180 180,0
Temperature range: From − 30°C to + 150°C
200 203,0
The product is also available in the GREEN variant for low 225 229,0
organic compound emission
Code: SLVD-G 250 254,0
280 280,0
Example identification
Product code: SLVD -aaa - bbb 300 305,0
315 315,0
type
thickness insulation 355 355,0
d1 400 406,0
450 457,0
500 508,0
560 568,0
630 638,0
710 718,0
800 810,0