Professional Documents
Culture Documents
1- The type of air sampling performed when an employee wears a sampling device that
draws air across a filter media for sample collection, which is sent to a laboratory is:
A. Grab Sample
B. Area Sample
C. Direct Reading Sample
D. Personal Sample
2- Which airborne particle size (diameter) is most likely to cause employee long term health
problems?
A. 4 micrometers
B. 40 micrometers
C. 400 micrometers
D. 4 millimeters
4- In performing personal air sampling for welding fumes, where should the filter cassette
be placed?
A. Attached to lapel
E. Inside welding helmet
B. On shoulder
C. At waist
5- When investigating an indoor air quality issue, the first step is to:
A. 3.92 ppm
B. 4.10 ppm
C. 3.50 ppm
D. 4.05 ppm
8- In conducting a safety and health audit at a plant owned by your company, you find a
solvent of potential hazard with a high probability of injury being used. What is your first
course of action?